Oil-in-water and oleogel-in-water emulsion encapsulate with hemp seed oil containing Δ9-tetrahydrocannabinol and cannabinol: Stability, degradation and in vitro simulation characteristics.

The present study focused on investigating the stability and in vitro simulation characteristics of oil-in-water (O/W) and oleogel-in-water (Og/W) emulsions. Compared with O/W emulsion, the Og/W emulsion exhibited superior stability, with a more evenly spread droplet distribution, and the Og/W emulsion containing 3 % hemp seed protein (HSP) showed better stability against environmental factors, including heat treatment, ionic strength, and changes in pH. Additionally, the stability of Δ9-tetrahydrocannabinol (Δ9-THC) and cannabinol (CBN) and the in vitro digestion of hemp seed oil (HSO) were evaluated. The half-life of CBN in the Og/W emulsion was found to be 131.82 days, with a degradation rate of 0.00527. The in vitro simulation results indicated that the Og/W emulsion effectively delayed the intestinal digestion of HSO, and the bioaccessibility of Δ9-THC and CBN reached 56.0 % and 58.0 %, respectively. The study findings demonstrated that the Og/W emulsion constructed with oleogel and HSP, exhibited excellent stability.

The Safety and Comparative Effectiveness of Non-Psychoactive Cannabinoid Formulations for the Improvement of Sleep: A Double-Blinded, Randomized Controlled Trial.

BACKGROUND: Clinical evidence on the use of cannabidiol (CBD) for sleep remains limited. Even fewer studies have tested the comparative effectiveness of cannabinoid formulations found within CBD products used for sleep or how they compare to other complementary therapies such as melatonin. METHODS: Participants (N = 1,793 adults experiencing symptoms of sleep disturbance) were randomly assigned to receive a 4-week supply of 1 of 6 products (all capsules) containing either 15 mg CBD or 5 mg melatonin, alone or in combination with minor cannabinoids. Sleep disturbance was assessed over a period of 5 weeks (baseline week and 4 weeks of product use) using Patient-Reported Outcomes Measurement Information System (PROMIS™) Sleep Disturbance SF 8A, administered via weekly online surveys. A linear mixed-effects regression model was used to assess the differences in the change in sleep disturbance through time between each active product arm and CBD isolate. RESULTS: All formulations exhibited a favorable safety profile (12% of participants reported a side effect and none were severe) and led to significant improvements in sleep disturbance (p < 0.001 in within-group comparisons). Most participants (56% to 75%) across all formulations experienced a clinically important improvement in their sleep quality. There were no significant differences in effect, however, between 15 mg CBD isolate and formulations containing 15 mg CBD and 15 mg cannabinol (CBN), alone or in combination with 5 mg cannabichromene (CBC). There were also no significant differences in effect between 15 mg CBD isolate and formulations containing 5 mg melatonin, alone or in combination with 15 mg CBD and 15 mg CBN. CONCLUSIONS: Our findings suggest that chronic use of a low dose of CBD is safe and could improve sleep quality, though these effects do not exceed that of 5 mg melatonin. Moreover, the addition of low doses of CBN and CBC may not improve the effect of formulations containing CBD or melatonin isolate.

Development and Validation of a Simple, Fast, and Accessible HPLC-UV Method for Cannabinoids Determination in Cannabis sativa L. Extracts and Medicinal Oils.

INTRODUCTION: Cannabis sativa L. is a well-recognized medicinal plant. Cannabis regulations in Argentina are insufficient to solve the problem of patient access to full-spectrum cannabis-based products. So, the market of artisanal products with unknown quality and dosage of cannabinoids is increasing, and so is the local demand and need for analyzing these products. However, much of the latest validated methodologies for cannabinoid quantification include expensive instrumentation that is not always available in laboratories of health institutions in Argentina. METHODS: The aim of this work was to develop and validate a simple and rapid HPLC-UV method for the identification and quantification of principal cannabinoids in cannabis resins, inflorescences, and medicinal oils using standard HPLC equipment. The cannabinoids selected for validation were cannabidiol acid (CBDA), cannabigerol (CBG), cannabidiol (CBD), cannabinol (CBN), delta-9-tetrahydrocannabinol (Δ9-THC), cannabichromene (CBC), and tetrahydrocannabinol acid (THCA). A method for the simultaneous identification and quantification of these 7 main cannabinoids was developed and then validated. Some data parameters were comparable to other reports with more sophisticated analytical instruments for the analysis of cannabis. The assessed limits of detection and the limits of quantitation ranged from 0.9 to 3.66 µg/mL and 2.78 to 11.09 µg/mL, respectively. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area with R2 values of > 0.99 for all 7 cannabinoids. RESULTS: The relative standard deviation (RSD%) varied from 2.34 to 4.82 for intraday repeatability and from 1.16 to 3.15 for interday repeatability. The percentage of recovery values was between 94 to 115% (resins) and 80 to 103% (inflorescence extract). The cannabis industry is growing rapidly, and there is a need for reliable testing methods to ensure the safety and efficacy of cannabis products. In addition, current methods for cannabinoid analysis are often time-consuming and expensive, while the HPLC-UV method herein reported is a simple, rapid, accurate, and cost-effective alternative for the analysis of cannabinoids in cannabis resins, inflorescences, and medicinal oils. CONCLUSION: This method will be proposed to be included in the Cannabis sativa L. monograph of the Argentine Pharmacopoeia.

Determination of phytocannabinoids in cannabis samples by ultrasound-assisted solid-liquid extraction and high-performance liquid chromatography with diode array detector analysis.

The characterisation of cannabis plants, especially the determination of specific phytocannabinoids, has gained enormous importance in the last decade, mainly due to the recent changes in cannabis control in several countries or states. This is particularly relevant for the forensic, medical or recreative industry to have a rapid, inexpensive, and reliable methodology to identify and quantify phytocannabinoids. Furthermore, spiking cannabis products with Δ8-tetrahydrocannabinol (THC) is a contemporary trend that demands improving or replacing current methods to include this cannabinoid. The current study presents an ultrasound-assisted solid-liquid extraction followed by high-performance liquid chromatography with diode array detection (HPLC-DAD) methodology to identify and quantify Δ9-THC, Δ8-THC, cannabidiol, cannabinol, Δ9-tetrahydrocannabinolic acid and cannabidiolic acid in cannabis products. The herbal samples were extracted with ethanol:acetonitrile (50:50, v:v) by ultrasonication using only 50 mg of sample. The plant oils were diluted in ethanol. The optimised procedure allowed ≈100% extraction efficiency of the target cannabinoids. The validation assays showed that the method is linear (R2 > 0.997), selective, sensitive, precise and accurate, with suitable limits of detection (0.125-0.250 µg mL-1) and quantification (0.500 µg mL-1). The method was successfully applied to cannabis samples, demonstrating its suitability for routine analyses. This contribution follows the current demand for fast and straightforward analysis services of this plant and its derivatives, using small amounts of sample. The present study compares very favourably against other works, particularly in regards to the extraction efficiency, speed of the overall procedure, method sensitivity, and ability to monitor Δ8-THC spiked samples using a novel solvent mixture.

Cannabidiol for Oral Health: A New Promising Therapeutical Tool in Dentistry.

The medical use of cannabis has a very long history. Although many substances called cannabinoids are present in cannabis, Δ9tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD) and cannabinol (CBN) are the three main cannabinoids that are most present and described. CBD itself is not responsible for the psychotropic effects of cannabis, since it does not produce the typical behavioral effects associated with the consumption of this drug. CBD has recently gained growing attention in modern society and seems to be increasingly explored in dentistry. Several subjective findings suggest some therapeutic effects of CBD that are strongly supported by research evidence. However, there is a plethora of data regarding CBD's mechanism of action and therapeutic potential, which are in many cases contradictory. We will first provide an overview of the scientific evidence on the molecular mechanism of CBD's action. Furthermore, we will map the recent developments regarding the possible oral benefits of CBD. In summary, we will highlight CBD's promising biological features for its application in dentistry, despite exiting patents that suggest the current compositions for oral care as the main interest of the industry.

Development and validation of a fit-for-purpose UHPLC-ESI-MS/MS method for the quantitation of cannabinoids in different matrices.

Several cannabinoids (cannabidivarin (CBDV), cannabigerol (CBG), cannabidiol (CBD), cannabinol (CBN) and cannabichromene (CBC)) and ethanol hemp extract are being used in primary human hepatocytes (PHH), Caenorhabditis elegans (C. elegans) and in vitro buccal membrane absorption models to elucidate their potential toxicological mechanisms, evaluate their oromucosal absorption, and to identify their metabolites. William's E medium, C. elegans habitation medium (CeHM), and HEPES-buffered hanks' balanced salt solution (HHBSS) are matrices used with these predictive test systems. Therefore, we developed and validated a sensitive fit-for-purpose ultra-high performance liquid chromatography-electrospray-tandem mass spectrometry (UHPLC-ESI-MS/MS) method for the quantitation of CBDV, CBG, CBD, CBN, and CBC in extracellular matrices used with these models for the first time. The separation of the analytes was performed on a Waters ACQUITY UPLC BEH C18 column (130 Å, 1.7 µm, 2.1 × 100 mm) protected with a Waters ACQUITY UPLC BEH C18 guard column (130 Å, 1.7 µm, 2.1 × 5 mm). Positive electrospray ionization and multiple reaction monitoring (MRM) modes were used. Under the developed experimental conditions, good linearities were obtained over the concentration range of 0.025-40 µg/ml with coefficients of determination (R2) varying from 0.9953 to 0.9998. The intra-day precisions were between 0.5 and 9.6% with accuracies within ± 16.7%, and the inter-day precisions ranged from 0.6 to 13.1 % with accuracies within ± 13.7%. The method recoveries were between 85.8 and 105.1%. In addition, time-consuming sample preparation was avoided by applying a simple and efficient extraction procedure, which meets the need for potential large-scale routine analysis. The described method was successfully applied to quantitate the analytes in samples produced with different models as well as in ethanolic hemp extract.

Cannabinoid Content in Cannabis Flowers and Homemade Cannabis-Based Products Used for Therapeutic Purposes in Argentina.

Introduction: A recent law (DCTO-2020-883-APN-PTE-Law No. 27,350. Regulation) passed in Argentina put an end to the ban imposed for the last 60 years on cannabis cultivation within the country. The law permits restricted access to cannabis derivatives for medicinal, therapeutic, and palliative use by individuals and communities, allowing self- and community-based cannabis production. This is cause for concern in view of the lack of quality controls for cannabis derivatives. The several varieties of cannabis grown in Argentina have different chemical profiles and are processed in a variety of ways-mostly by alcohol extraction or maceration at different temperatures and for different amounts of times-making the cannabinoid content of these preparations highly variable. Determining the characteristics of home- and community-grown cannabis products will facilitate the implementation of public policies conducive to their safety and improvement. Objective: The aim of this study was to determine the cannabinoid chemotypes used for therapeutic purposes in Argentina and evaluate whether the cannabinoids present in homemade derivatives are comparable to those in commercially available products. Materials and Methods: High performance liquid chromatography with ultraviolet and diode array detector (HPLC/UV-DAD) analysis of 436 samples (oils, resins, and inflorescences) was carried out to determine the identity and concentration of five cannabinoids: tetrahydrocannabinolic acid (THCA), tetrahydrocannabinol (THC), cannabidiolic acid (CBDA), cannabidiol (CBD), and cannabinol (CBN). From three different sources, the samples represent the type of medical cannabis preparations to which patients have access. Results: The results indicate that the medium-to-low cannabinoid concentration in a significant number of homemade oil samples is similar to that found in commercial products. Most of the samples have a THC/CBD ratio >1 or only contain THC. Acidic cannabinoids were detected in homemade preparations, but were not reported in package inserts of commercial products. Conclusions: Our results indicate that despite their considerable variability, homemade preparations as a whole show cannabinoid levels and profiles equivalent to the commercially available products commonly used for medicinal, therapeutic, and palliative purposes in Argentina.

Semiquantitative Screening of THC Analogues by Silica Gel TLC with an Ag(I) Retention Zone and Chromogenic Smartphone Detection.

With the ever-evolving cannabis industry, low-cost and high-throughput analytical methods for cannabinoids are urgently needed. Normally, (potentially) psychoactive cannabinoids, typically represented by Δ9-tetrahydrocannabinol (Δ9-THC), and nonpsychoactive cannabinoids with therapeutic benefits, typically represented by cannabidiol (CBD), are the target analytes. Structurally, the former (tetrahydrocannabinolic acid (THCA), cannabinol (CBN), and THC) have one olefinic double bond and the latter (cannabidiolic acid (CBDA), cannabigerol (CBG), and CBD) have two, which results in different affinities toward Ag(I) ions. Thus, a silica gel thin-layer chromatography (TLC) plate with the lower third impregnated with Ag(I) ions enabled within minutes a digital chromatographic separation of strongly retained CBD analogues and poorly retained THC analogues. The resolution (Rs) between the closest two spots from the two groups was 4.7, which is almost 8 times higher than the resolution on unmodified TLC. After applying Fast Blue BB as a chromogenic reagent, smartphone-based color analysis enabled semiquantification of the total percentage of THC analogues (with a limit of detection (LOD) of 11 ng for THC, 54 ng for CBN, and 50 ng for THCA when the loaded volume is 1.0 µL). The method was validated by analyzing mixed cannabis extracts and cannabis extracts. The results correlated with those of high-performance liquid chromatography with ultraviolet detection (HPLC-UV) (R2 = 0.97), but the TLC approach had the advantages of multi-minute analysis time, high throughput, low solvent consumption, portability, and ease of interpretation. In a desiccator, Ag(I)-TLC plates can be stored for at least 3 months. Therefore, this method would allow rapid distinction between high and low THC varieties of cannabis, with the potential for on-site applicability.

Rapid quantification of cannabinoids in beef tissues and bodily fluids using direct-delivery electrospray ionization mass spectrometry.

Hempseed cake is a byproduct of hempseed oil extraction and is potentially a useful source of protein and fiber for use in ruminant diets. However, data are lacking on the appearance and/or clearance of cannabinoids in tissues of animals fed hempseed cake. To this end, a rapid method for quantifying cannabinol (CBN), cannabidiol (CBD), cannabinolic acid (CBNA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabichromenic acid (CBCA), cannabidivarin (CBDV), cannabidivarinic acid (CBDVA), tetrahydrocannabinol (THC) and tetrahydrocannabinolic acid (THCA) in cattle tissues, plasma, and urine was developed using rapid screen electrospray ionization mass spectrometry (RS-ESI-MS). Regression coefficients of matrix-matched standard curves ranged from 0.9946 to >0.9999 and analyte recoveries averaged from 90.2 ± 15.5 to 108.7 ± 18.7% across all compounds. Limits of detection and quantification ranged from 0.05 to 2.79 ng · mL-1 and 0.17 to 9.30 ng · mL-1, respectively, while the inter-day relative standard deviation ranged from 5.1 to 15.1%. Rapid screening electrospray ionization mass spectrometry (RS-ESI-MS) returned no false positives for any cannabinoid in plasma, urine, and tissue (liver, skeletal muscle) samples from 6 non-dosed control animals (n = 90 samples; of which 72 samples were plasma or urine and 18 samples were tissues). Across-animal cannabinoid concentrations measured in 32 plasma samples of cattle dosed with ground hemp were quantified by RS-ESI-MS; analytical results correlated well (r2 = 0.963) with independent LC-MS/MS analysis of the same samples.

DoE-assisted development and validation of a stability-indicating HPLC-DAD method for simultaneous determination of five cannabinoids in Cannabis sativa L. based on analytical quality by design (AQbD) concept.

INTRODUCTION: Medical uses of Cannabis sativa L. have gained interest in recent decades, which highlights the need for defining appropriate quality specifications for Cannabis-based products. However, the complexity of plant matrices and structural similarity between cannabinoids make analytical development a challenging task. Thus, the application of analytical quality by design (AQbD)-driven approaches can favour the development of fit-for-purpose methods. OBJECTIVES: To develop a high-performance liquid chromatography diode array detector (HPLC-DAD) method for simultaneous quantification of cannabidiol, Δ9 -tetrahydrocannabinol, cannabidiolic acid, tetrahydrocannabinolic acid, and cannabinol in C. sativa by applying an AQbD-driven approach. MATERIALS AND METHODS: Critical method attributes (CMA) were established following the analytical target profile. Critical method variables (CMV) were categorised based on risk assessment and literature review. Selected CMV regarding sample preparation and chromatographic conditions were optimised using response surface methodology (RSM). The working point was estimated by multiple response optimisation using Deringer's desirability function. The validity of the optimal conditions was confirmed experimentally. Method validation was performed according to ANVISA and ICH guidelines. Relative response factors (RRFs) were also determined. RESULTS AND DISCUSSION: Baseline resolution of 12 major cannabinoids was achieved in a 35 min chromatographic analysis. All experimental responses obtained during confirmatory analyses were within the prediction intervals (PI95% ). Method's selectivity, linearity (10-100 µg/mL), precision, bias, extraction recovery, and ruggedness were satisfactorily demonstrated. CONCLUSIONS: The application of an AQbD-driven approach allowed for a better understanding of the effects of the ensemble of CMV on the analyte's behaviour, enabling the definition of appropriate conditions to ensure consistent achievement of the intended method's performance.

Direct Quantitation of Phytocannabinoids by One-Dimensional 1H qNMR and Two-Dimensional 1H-1H COSY qNMR in Complex Natural Mixtures.

The widespread use of phytocannabinoids or cannabis extracts as ingredients in numerous types of products, in combination with the legal restrictions on THC content, has created a need for the development of new, rapid, and universal analytical methods for their quantitation that ideally could be applied without separation and standards. Based on previously described qNMR studies, we developed an expanded 1H qNMR method and a novel 2D-COSY qNMR method for the rapid quantitation of ten major phytocannabinoids in cannabis plant extracts and cannabis-based products. The 1H qNMR method was successfully developed for the quantitation of cannabidiol (CBD), cannabidiolic acid (CBDA), cannabinol (CBN), cannabichromene (CBC), cannabichromenic acid (CBCA), cannabigerol (CBG), cannabigerolic acid (CBGA), Δ9-tetrahydrocannabinol (Δ9-THC), Δ9-tetrahydrocannabinolic acid (Δ9-THCA), Δ8-tetrahydrocannabinol (Δ8-THC), cannabielsoin (CBE), and cannabidivarin (CBDV). Moreover, cannabidivarinic acid (CBDVA) and Δ9-tetrahydrocannabivarinic acid (Δ9-THCVA) can be distinguished from CBDA and Δ9-THCA respectively, while cannabigerovarin (CBGV) and Δ8-tetrahydrocannabivarin (Δ8-THCV) present the same 1H-spectra as CBG and Δ8-THC, respectively. The COSY qNMR method was applied for the quantitation of CBD, CBDA, CBN, CBG/CBGA, and THC/THCA. The two methods were applied for the analysis of hemp plants; cannabis extracts; edible cannabis medium-chain triglycerides (MCT); and hemp seed oils and cosmetic products with cannabinoids. The 1H-NMR method does not require the use of reference compounds, and it requires only a short time for analysis. However, complex extracts in 1H-NMR may have a lot of signals, and quantitation with this method is often hampered by peak overlap, with 2D NMR providing a solution to this obstacle. The most important advantage of the COSY NMR quantitation method was the determination of the legality of cannabis plants, extracts, and edible oils based on their THC/THCA content, particularly in the cases of some samples for which the determination of THC/THCA content by 1H qNMR was not feasible.

Cannabis: Chemistry, extraction and therapeutic applications.

Cannabis, a genus of perennial indigenous plants is well known for its recreational and medicinal activities. Cannabis and its derivatives have potential therapeutic activities to treat epilepsy, anxiety, depression, tumors, cancer, Alzheimer's disease, Parkinson's disease, to name a few. This article reviews some recent literature on the bioactive constituents of Cannabis, commonly known as phytocannabinoids, their interactions with the different cannabinoids and non-cannabinoid receptors as well as the significances of these interactions in treating various diseases and syndromes. The biochemistry of some notable cannabinoids such as tetrahydrocannabinol, cannabidiol, cannabinol, cannabigerol, cannabichromene and their carboxylic acid derivatives is explained in the context of therapeutic activities. The medicinal features of Cannabis-derived terpenes are elucidated for treating several neuro and non-neuro disorders. Different extraction techniques to recover cannabinoids are systematically discussed. Besides the medicinal activities, the traditional and recreational utilities of Cannabis and its derivatives are presented. A brief note on the legalization of Cannabis-derived products is provided. This review provides comprehensive knowledge about the medicinal properties, recreational usage, extraction techniques, legalization and some prospects of cannabinoids and terpenes extracted from Cannabis.

Activity of THC, CBD, and CBN on Human ACE2 and SARS-CoV1/2 Main Protease to Understand Antiviral Defense Mechanism.

THC, CBD, and CBN were reported as promising candidates against SARS-CoV2 infection, but the mechanism of action of these three cannabinoids is not understood. This study aims to determine the mechanism of action of THC, CBD, and CBN by selecting two essential targets that directly affect the coronavirus infections as viral main proteases and human angiotensin-converting enzyme2. Tested THC and CBD presented a dual-action action against both selected targets. Only CBD acted as a potent viral main protease inhibitor at the IC50 value of 1.86 ± 0.04 µM and exhibited only moderate activity against human angiotensin-converting enzyme2 at the IC50 value of 14.65 ± 0.47 µM. THC acted as a moderate inhibitor against both viral main protease and human angiotensin-converting enzymes2 at the IC50 value of 16.23 ± 1.71 µM and 11.47 ± 3.60 µM, respectively. Here, we discuss cannabinoid-associated antiviral activity mechanisms based on in silico docking studies and in vitro receptor binding studies.

CBG, CBD, Δ9-THC, CBN, CBGA, CBDA and Δ9-THCA as antioxidant agents and their intervention abilities in antioxidant action.

Positive effect of some cannabinoids in the treatment and prophylaxis of a wide variety of oxidation-associated diseases and growing popularity of supplements containing cannabinoids, mainly cannabinoid oils (e.g. CBD oil, CBG oil), in the self-medication of humans cause a growing interest in the antioxidant properties of these compounds, especially those not showing psychotropic effects. Herein, we report the antioxidant activity of cannabigerol (CBG), cannabidiol (CBD), Δ9-tetrahydrocannabinol (Δ9-THC), cannabinol (CBN), cannabigerolic acid (CBGA), cannabinolic acid (CBDA) and Δ9-tetrahydrocannabinolic acid (Δ9-THCA) estimated by spectrophotometric methods: ABTS, DPPH, ORAC, beta-carotene CUPRAC and FRAP. The presented data prove that all the examined cannabinoids exhibit antioxidant activity manifested in their ability to scavenge free radicals, to prevent the oxidation process and to reduce metal ions. Although the intensity of these activities is not the same for the individual cannabinoids it is comparable for all of them with that of E vitamin. As results from the research, the significance of the two types of electron sources presenting in examined cannabinoids, phenolic groups and double bonds transferring electrons, depends on the type of electron-accepting species - radicals/metal ions.

Antioxidants help favorably regulate the kinetics of lipid peroxidation, polyunsaturated fatty acids degradation and acidic cannabinoids decarboxylation in hempseed oil.

The seed of the hemp plant (Cannabis sativa L.) has been revered as a nutritional resource in Old World Cultures. This has been confirmed by contemporary science wherein hempseed oil (HSO) was found to exhibit a desirable ratio of omega-6 and omega-3 polyunsaturated fatty acids (PUFAs) considered optimal for human nutrition. HSO also contains gamma-linoleic acid (GLA) and non-psychoactive cannabinoids, which further contribute to its' potential bioactive properties. Herein, we present the kinetics of the thermal stability of these nutraceutical compounds in HSO, in the presence of various antioxidants (e.g. butylated hydroxytoluene, alpha-tocopherol, and ascorbyl palmitate). We focussed on oxidative changes in fatty acid profile and acidic cannabinoid stability when HSO was heated at different temperatures (25 °C to 85 °C) for upto 24 h. The fatty acid composition was evaluated using both GC/MS and 1H-NMR, and the cannabinoids profile of HSO was obtained using both HPLC-UV and HPLC/MS methods. The predicted half-life (DT50) for omega-6 and omega-3 PUFAs in HSO at 25 °C was about 3 and 5 days, respectively; while that at 85 °C was about 7 and 5 hours respectively, with respective activation energies (Ea) being 54.78 ± 2.36 and 45.02 ± 2.87 kJ/mol. Analysis of the conjugated diene hydroperoxides (CDH) and p-Anisidine value (p-AV) revealed that the addition of antioxidants significantly (p < 0.05) limited lipid peroxidation of HSO in samples incubated at 25-85 °C for 24 h. Antioxidants reduced the degradation constant (k) of PUFAs in HSO by upto 79%. This corresponded to a significant (p < 0.05) increase in color stability and pigment retention (chlorophyll a, chlorophyll b and carotenoids) of heated HSO. Regarding the decarboxylation kinetics of cannabidiolic acid (CBDA) in HSO, at both 70 °C and 85 °C, CBDA decarboxylation led to predominantly cannabidiol (CBD) production. The half-life of CBDA decarboxylation (originally 4 days) could be increased to about 17 days using tocopherol as an antioxidant. We propose that determining acidic cannabinoids decarboxylation kinetics is a useful marker to measure the shelf-life of HSO. The results from the study will be useful for researchers looking into the thermal treatment of hempseed oil as a functional food product, and those interested in the decarboxylation kinetics of the acidic cannabinoids.

Cannabis constituents reduce seizure behavior in chemically-induced and scn1a-mutant zebrafish.

Current antiepileptic drugs (AEDs) are undesirable for many reasons including the inability to reduce seizures in certain types of epilepsy, such as Dravet syndrome (DS) where in one-third of patients does not respond to current AEDs, and severe adverse effects that are frequently experienced by patients. Epidiolex, a cannabidiol (CBD)-based drug, was recently approved for treatment of DS. While Epidiolex shows great promise in reducing seizures in patients with DS, it is used in conjunction with other AEDs and can cause liver toxicity. To investigate whether other cannabis-derived compounds could also reduce seizures, the antiepileptic effects of CBD, Δ9-tetrahydrocannabinol (THC), cannabidivarin (CBDV), cannabinol (CBN), and linalool (LN) were compared in both a chemically-induced (pentylenetetrazole, PTZ) and a DS (scn1Lab-/-) seizure models. Zebrafish (Danio rerio) that were either wild-type (Tupfel longfin) or scn1Lab-/- (DS) were exposed to CBD, THC, CBDV, CBN, or LN for 24 h from 5 to 6 days postfertilization. Following exposure, total distance traveled was measured in a ViewPoint Zebrabox to determine if these compounds reduced seizure-like activity. Cannabidiol (0.6 and 1 µM) and THC (1 and 4 µM) significantly reduced PTZ-induced total distance moved. At the highest THC concentration, the significant reduction in PTZ-induced behavior was likely the result of sedation as opposed to antiseizure activity. In the DS model, CBD (0.6 µM), THC (1 µM), CBN (0.6 and 1 µM), and LN (4 µM) significantly reduced total distance traveled. Cannabinol was the most effective at reducing total distance relative to controls. In addition to CBD, other cannabis-derived compounds showed promise in reducing seizure-like activity in zebrafish. Specifically, four of the five compounds were effective in the DS model, whereas in the PTZ model, only CBD and THC were, suggesting a divergence in the mode of action among the cannabis constituents.

Antinociceptive and Immune Effects of Delta-9-Tetrahydrocannabinol or Cannabidiol in Male Versus Female Rats with Persistent Inflammatory Pain.

Chronic pain is the most common reason reported for using medical cannabis. The goal of this research was to determine whether the two primary phytocannabinoids, delta-9-tetrahydrocannabinol (THC) and cannabidiol (CBD), are effective treatments for persistent inflammatory pain. In experiment 1, inflammation was induced by intraplantar injection of Complete Freund's adjuvant (CFA). Then THC (0.0-4.0 mg/kg, i.p.) or CBD (0.0-10 mg/kg, i.p.) was administered twice daily for 3 days. On day 4, THC, CBD, or vehicle was administered, and allodynia, hyperalgesia, weight-bearing, locomotor activity, and hindpaw edema were assessed 0.5-4 hours postinjection. In experiment 2, CFA or mineral oil (no-pain control)-treated rats were given THC (2.0 mg/kg, i.p.), CBD (10 mg/kg, i.p.), or vehicle in the same manner as in experiment 1. Four hours postinjection on day 4, serum samples were taken for analysis of cytokines known to influence inflammatory pain: interleukin (IL)-1ß, IL-6, IL-10, interferon (IFN)-γ, and tumor necrosis factor (TNF)-α THC dose-dependently reduced pain-related behaviors but did not reduce hindpaw edema, and little tolerance developed to THC's effects. In contrast, CBD effects on inflammatory pain were minimal. THC produced little to no change in serum cytokines, whereas CBD decreased IL-1ß, IL-10, and IFN-γ and increased IL-6. Few sex differences in antinociception or immune modulation were observed with either drug, but CFA-induced immune activation was significantly greater in males than females. These results suggest that THC may be more beneficial than CBD for reducing inflammatory pain in that THC maintains its efficacy with short-term treatment in both sexes and does not induce immune activation. SIGNIFICANCE STATEMENT: The pain-relieving effects of cannabidiol (CBD) and delta-9-tetrahydrocannabinol (THC) are examined in male and female rats with persistent inflammatory pain to determine whether individual phytocannabinoids could be a viable treatment for men and women with chronic inflammatory pain. Additionally, sex differences in the immune response to an adjuvant and to THC and CBD are characterized to provide preliminary insight into immune-related effects of cannabinoid-based therapy for pain.

Selective Extraction of Cannabinoid Compounds from Cannabis Seed Using Pressurized Hot Water Extraction.

Phytochemicals of Cannabis sativa mainly for the use in the different industries are that of delta-9-tetrahydrocannabinol (THC) and cannabidiol (CBD). Pressurized hot water extraction (PHWE) is seen as an efficient, fast, green extraction technique for the removal of polar and semi-polar compounds from plant materials. The PHWE technique was applied to extract cannabinoid compounds from Cannabis sativa seed. Response surface methodology was used to investigate the influence of extraction time (5-60 min), extraction temperature (50-200 °C) and collector vessel temperature (25-200 °C) on the recovery of delta-9-tetrahydrocannabinol (THC), cannabinol (CBN), cannabidiol (CBD), cannabichromene (CBG) and cannabigerol (CBC) from Cannabis sativa seed by PHWE. The identification and semi quantification of cannabinoid compounds were determined using GCXGC-TOFMS. The results obtained from different extractions show that the amount of THC and CBN was drastically decreasing in the liquid extract when the temperature rose from 140 to 160 °C in the extraction cell and the collector's vessel. The optimal conditions to extract more CBD, CBC, and CBG than THC and CBN were set at 150 °C, 160 °C and 45 min as extraction temperature, the temperature at collector vessel, and the extraction time, respectively. At this condition, the predicted and experimental ratio of THCt (THC + CBN)/CBDt (CBD + CBC+ CBG) was found to be 0.17 and 0.18, respectively. Therefore, PHWE can be seen as an alternative to the classic extraction approach as the efficiency is higher and it is environmentally friendly.

Identification and quantification of cannabinol as a biomarker for local hemp retting in an ancient sedimentary record by HPTLC-ESI-MS.

Cannabis products have been used in various fields of everyday life for many centuries, and applications in folk medicine and textile production have been well-known for many centuries. For traditional textile production, hemp fibers were extracted from the stems by water retting in stagnant or slow-moving waters. During this procedure, parts of the plant material' among them phytocannabinoids' are released into the water. Cannabinol (CBN) is an important degradation product of the predominant phytocannabinoids found in Cannabis species. Thus, it is an excellent indicator for present as well as ancient hemp water retting. In this study, we developed and validated a simple and fast method for the determination of CBN in sediment samples using high-performance thin-layer chromatography (HPTLC) combined with electrospray ionization mass spectrometry (ESI-MS), thereby testing different extraction and cleanup procedures' as well as various sorbents and solvents for planar chromatography. This method shows a satisfactory overall analytical performance with an average recovery rate of 73%. Our protocol enabled qualitative and quantitative analyses of CBN in samples of a bottom sediment core' having been obtained from a small lake in Northern India, where intense local retting of hemp was suggested in the past. The analyses showed a maximum CBN content in pollen zone 4 covering a depth range of 262-209 cm, dating from approximately 480 BCE to 1050 CE. These findings correlate with existing records of Cannabis-type pollen. Thus, the method we propose is a helpful tool to track ancient hemp retting activities. Graphical Abstract.