ABSTRACT
Bamboos are perennial, arborescent, monocarpic and industrially important non-timber plants. They are important for various purposes, such as carbon sequestration, biodiversity support, construction, and food and fiber production. However, traditional vegetative propagation is insufficient for bamboo multiplication. Moreover, little is known about the mechanism of gold nanoparticles (AuNPs) in vitro proliferation and regulation of physiological and biochemical properties. In this study, we investigated the impacts of citrate and cetyltrimethylammonium bromide (CTAB) coated AuNPs on in vitro proliferation, photosynthetic pigment content and antioxidant potential of Dendrocalamus asper (Schult. and Schult. F.) Backer ex K. Heyne. Various morpho-physiological and biochemical parameters were differentially affected along the citrate- and CTAB-coated AuNPs concentration gradients (200-600 µM). In vitro shoot proliferation, photosynthetic pigment content and antioxidant activities were higher in D. asper grown on Murashige and Skoog medium supplemented with 2 mg·L-1 benzyladenine and 400 µM citrate-coated AuNPs than in those grown on Murashige and Skoog medium supplemented with 600 µM CTAB- coated AuNPs. Identification of genes regulating in vitro D. asper proliferation will help understand the molecular regulation of AuNPs-mediated elicitation for modulating various physiological and biochemical activities during micropropagation. Gene Ontology enrichment analysis and Kyoto Encyclopedia of Genes and Genomes pathway analyses identified differentially expressed genes associated with in vitro modulation of AuNPs-regulated biological processes and molecular functions. The findings of this study provide new insight into AuNPs-mediated elicitation of in vitro mass scale bamboo propagation.
Subject(s)
Gold , Metal Nanoparticles , Antioxidants/pharmacology , Cetrimonium , Gene Expression Profiling , Citrates , Citric Acid , Dietary SupplementsABSTRACT
Use of natural polymer in the development of Drug Delivery Systems (DDS) has greatly increased in recent past because of their biocompatible, non-allergic and biodegradable nature. Natural polymers are usually hydrophilic supports, so in order to be a carrier of a hydrophobic drug their nature needs to be changed. Each developed system behaves differently towards different drugs in terms of loading and sustained release of the drug as well. In the present work we report differential binding of piperine & curcumin with cetyltrimethylammonium bromide (CTAB) modified cellulose, alginate and pectin. Difference in interaction between the piperine and curcumin with supports has been visualized using in-vitro as well as in-silico studies. Initial results obtained after in-silico studies have been validated via time dependent anti-trypsin, serum protein binding, anti-cathepsin, anti-oxidant, and anti-α-amylase activities. FT-IR, SEM, fluorescence and Particle size have been used to characterize the piperine loaded on CTAB-modified polymeric supports.
Subject(s)
Curcumin , Curcumin/pharmacology , Curcumin/chemistry , Cetrimonium , Alginates/chemistry , Pectins , Spectroscopy, Fourier Transform Infrared , Cellulose/chemistry , Polymers/chemistry , Drug Carriers/chemistryABSTRACT
The study of many membrane enzymes in an aqueous medium is difficult due to the loss of their catalytic activity, which makes it necessary to use membrane-like systems, such as reverse micelles of surfactants in nonpolar organic solvents. However, it should be taken into account that the micelles are a simplified model of natural membranes, since membranes contain many different components, a significant part of which are phospholipids. In this work, we studied impact of the main phospholipids, phosphatidylcholine (PC) and phosphatidylethanolamine (PE), on activity of the membrane enzymes using galactonolactone oxidase from Trypanosoma cruzi (TcGAL) and L-galactono-1,4-lactone dehydrogenase from Arabidopsis thaliana (AtGALDH) as examples. Effect of the structure (and charge) of the micelle-forming surfactant itself on the activity of both enzymes has been studied using an anionic surfactant (AOT), a neutral surfactant (Brij-96), and a mixture of cationic and anionic surfactants (CTAB and AOT) as examples. The pronounced effect of addition of PC and PE lipids on the activity of AtGALDH and TcGAL has been detected, which manifests as increase in catalytic activity and significant change in the activity profile. This can be explained by formation of the tetrameric form of enzymes and/or protein-lipid complexes. By varying composition and structure of the micelle-forming surfactants (AOT, CTAB, and Brij-96) it has been possible to change catalytic properties of the enzyme due to effect of the surfactant on the micelle size, lipid mobility, charge, and rigidity of the matrix itself.
Subject(s)
Arabidopsis , Oxidoreductases Acting on CH-CH Group Donors , Plant Oils , Polyethylene Glycols , Sugar Acids , Trypanosoma cruzi , Oxidoreductases , Micelles , Cetrimonium , Lactones , Surface-Active Agents/pharmacology , Surface-Active Agents/chemistry , LipidsABSTRACT
The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate's high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45-50 mgNO3-/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.
Subject(s)
Chitosan , Drinking Water , Nanotubes, Carbon , Water Pollutants, Chemical , Water Purification , Adsorption , Animals , Cetrimonium , Fertilizers , Humans , Manure , Minerals , Nitrates , Nitrogen , Nitrogen Oxides , Tea , Water Purification/methods , Water ResourcesABSTRACT
Various reported methods are devoted to nitrate removal from water over the years. However, recently researchers are focusing on developing the materials that offer bio-based, non-toxic, inexpensive and yet an efficient solution for water treatment. In this study, removal of nitrates from water was carried out using oil tea shells (OTS) as a biosorbent. OTS powder was impregnated with ZnCl2 and biochar was prepared which was further treated with Cetyltrimethylammonium bromide (CTAB), a cationic surfactant. Both the Langmuir and the Freundlich models were satisfied by the nitrate adsorption of OTS biochar. The adsorption capacity was measured at 15.6 mg/g when the circumstances were at their best. The pseudo-second-order model provided an accurate description of the kinetic data that were collected from batch trials. The adsorption yield goes up when by usage of more adsorbent, but it goes down when adsorption start with a higher concentration of nitrate. The strong basis of analytical equipments were used to characterize the OTS biosorbent. According to the findings of the research, surface-modified OTS biochar is an effective material for the removal of nitrate from aqueous solutions. This means that it has the potential to be utilized in water treatment as an adsorbent that is both inexpensive and kind to the natural environment. Removal of heavy metals and other organic pollutants, both from groundwater and wastewater using OTS biochar seems like a promising and interesting area of study.
Subject(s)
Metals, Heavy , Water Pollutants, Chemical , Adsorption , Cetrimonium , Charcoal , Hydrogen-Ion Concentration , Kinetics , Nitrates , Nitrogen Oxides , Powders , Surface-Active Agents , Tea , Wastewater , Water Pollutants, Chemical/analysisABSTRACT
Little is known about the interactions among phagocytes and antifungal agents and the antifungal immunomodulatory activities on Candida species biofilms. Here, inhibition of C. albicans biofilms and the interactions among biofilms and phagocytes alone or in combination with essential oils, biological, and chemical agents, or fluconazole were investigated. Biofilm formation by a panel of 28 C. albicans clinical isolates from hospitalized patients, birds, and cattle was tested. The anti-biofilm activities of cinnamon and clove oils, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and Enterococcus faecalis cell-free supernatant (CFS) in comparison with fluconazole were investigated using crystal violet and XTT reduction assays, expression of hypha-specific and hyphal regulator genes, and scanning electron microscopy (SEM) analysis. Of the tested C. albicans isolates, 15 of 28 (53.6%) were biofilm producers. Cinnamon followed by E. faecalis-CFS, SDS, and CTAB was the most effective inhibitors of planktonic C. albicans and biofilms. Fluconazole was an ineffective inhibitor of C. albicans biofilms. Sessile minimal inhibitory concentration (SMIC50) of cinnamon, SDS, CTAB, and E. faecalis-CFS downregulated the hypha-specific and regulator genes, albeit to various extents, when compared with untreated biofilms (P < 0.001). SEM analysis revealed disruption and deformity of three-dimensional structures in cinnamon oil-treated biofilms. C. albicans sessile cells within biofilm were less susceptible to phagocytosis than planktonic cells. The additive effects of phagocytes and the tested antifungals enabled phagocytes to engulf C. albicans cells rapidly in cinnamon, E. faecalis-CFS, or SDS-treated biofilms. No differences in anti-Candida or anti-biofilm eradication activities were detected among the tested isolates. Our findings reinforce the substantial anti-biofilm activity of cinnamon oil, SDS, and E. faecalis-CFS and provide new avenues for the development of novel anti-biofilm immunotherapies or antifungals that could be used prior to or during the management of cases with biofilm-associated infections.
Subject(s)
Candidiasis , Oils, Volatile , Animals , Antifungal Agents/pharmacology , Biofilms , Candida , Candida albicans , Candidiasis/microbiology , Cattle , Cetrimonium/pharmacology , Fluconazole/pharmacology , Microbial Sensitivity Tests , Oils, Volatile/pharmacology , PhagocytesABSTRACT
A simple, selective, and accurate electrochemical chiral sensor based on molecularly imprinted polymer (MIP) has been developed for sensitive and selective detection of esomeprazole (ESOM). For this purpose, the porous MIP sensor was prepared using tetraethyl orthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) in the presence of ß-cyclodextrin (ß-CD) as a chiral recognizing element on a glassy carbon electrode (GCE). The changes in the MIP-layer related to removal and rebinding of the target ESOM were performed via differential pulse voltammetry (DPV) and cyclic voltammetry (CV) by using [Fe(CN)6]3-/4- as the redox probe. The structures of the developed sensor surface were characterized by using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Electrochemical impedance spectroscopy (EIS) was also utilized for a complementary electrochemical characterization. The calibration curve was obtained in the range 1.0 × 10-14-2.0 × 10-13 M with a limit of detection (LOD) of 1.9 × 10-15 M. The developed method has improved the accessibility of binding sites by producing the porous material via hydrolysis/condensation reaction of TEOS in presence of CTAB. The selectivity tests of the developed SiO2-ß-CD@MIP/GCE sensor indicated a high specificity towards ESOM compared with structurally related competitor molecules such as R-omeprazole (R-OM), R-lansoprazole, and S-lansoprazole. The developed sensor was successfully used to determine ESOM in tablets and commercial human serum samples with satisfactory recoveries (100.25 to 100.60%) and precision (RSD 0.46 to 0.66%).
Subject(s)
Molecular Imprinting , Carbon , Cetrimonium , Electrochemical Techniques/methods , Esomeprazole , Humans , Silicon Dioxide , StereoisomerismABSTRACT
The CuO-ZnO-Carbon (CZC) nanocomposites (NCs) were synthesized via a green method at 300 and 400 °C calcinated temperatures, using waste marigold (Tagetes spp.) flower petal extract as a reducing agent and carbon source. A novel green strategy for the synthesis of highly effective CZC NCs was developed which showed better adsorption of toxic Cr(VI) and Congo red (CR) dye compared to unsupported carbon NCs. In this strategy, fine powder of petals as carbon source were passed with the flower liquid extract during the filtration process, which supported the metal oxides nanorods(NRs)/nanoparticles(NPs) on the surface. Furthermore, the surface of the synthesized NCs was modified by Cetyl Trimethyl Ammonium Bromide (CTAB) cationic surfactant to increase surface functionality, surface area, and positive charge density of NCs. Additionally, the adsorption performance of Cr(VI) and CR dye improved from acidic pH to neutral pH after surfactant modification of NCs compared to unmodified NCs. The characterization techniques such as Powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) surface area analysis, Point of zero charge (pHpzc), Field Emission Scanning Electron Microscopy (FE-SEM), Transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) were performed to examine physio-chemical properties of NCs and CTAB modified NCs. The FTIR and BET analysis confirmed that CTAB modified NCs showed excellent functionality and more than 49% and ~67% greater surface area than CZC-300 and CZC-400, respectively, which prepared at 300 and 400 °C temperature. XRD analysis confirmed that NCs were highly crystalline and no phase change after surfactant modification. The FE-SEM and TEM analysis confirmed the pentagonal NRs and spherical NPs of ZnO and CuO, respectively, were formed on the carbon surface. After CTAB modification, no change in the surface morphology of NCs was observed. Thus, comparative study of NCs and CTAB modified NCs was done for Cr(VI) and CR dye adsorption by varying batch conditions, such as initial pH, contact time, temperature, and initial concentration of Cr(VI)/CR dye. The equilibrium time and concentration data were fitted with non-linear forms of kinetic and isotherm models, respectively. CTAB modified CZC-300 NCs showed excellent adsorption capacity for both pollutants up to pH 6 compared to CZC-300 and CZC-400 NCs. Additionally, the maximum adsorption capacity of CTAB modified NCs for Cr(VI) and CR dye were 201.56 and 331.36 mg/g, respectively, at pH 2 and 30 °C and increased with increasing temperature. The effect of co-existing anions on adsorption capacity of both NCs for Cr(VI) and CR dye adsorption was investigated. The regeneration and reusability experiments of both NCs were also performed.
Subject(s)
Nanocomposites , Tagetes , Water Pollutants, Chemical , Zinc Oxide , Adsorption , Cetrimonium , Chromium/analysis , Congo Red , Copper , Flowers/chemistry , Hydrogen-Ion Concentration , Kinetics , Plant Extracts , Spectroscopy, Fourier Transform Infrared , Water Pollutants, Chemical/analysisABSTRACT
Quercus infectoria (nutgall) has been reported to possess antimicrobial activities against a wide range of pathogens. Nevertheless, the biofilm removal effect of nutgall extract has not been widely investigated. In this study, we therefore evaluated the effect of nutgall extract in combination with cetrimonium bromide (CTAB) against preformed biofilm of Salmonella Typhimurium on polypropylene (PP) and stainless steel (SS) coupons in comparison with other sanitizers. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of nutgall extract and surfactants (CTAB and sodium dodecyl sulfate; SDS) were assessed. CTAB showed a more efficient antimicrobial activity than SDS and was selected to use in combination with nutgall extract for removing biofilm. To determine the biofilm removal efficacy, the PP and SS coupons were individually submerged in 2x MBC of nutgall extract (256 mg/ml) + 2x MBC of CTAB (2.5 mg/ml), nutgall extract alone (256 mg/ml), CTAB alone (2.5 mg/ml), distilled water, and 100 ppm sodium hypochlorite for 5, 15, and 30 min. The remaining sessile cells in biofilm were determined. Overall, the greatest biofilm removal efficacy was observed with nutgall extract + CTAB; the biofilm removal efficacy of sanitizers tended to increase with the exposure time. The SEM analysis demonstrated that S. Typhimurium biofilm on PP and SS coupons after exposure to nutgall extract + CTAB for 30 min displayed morphological alterations with wrinkles. This study suggests nutgall extract + CTAB may be an alternative to commonly used sanitizers to remove biofilm from food contact surfaces in the food industry and household.
Subject(s)
Biofilms/drug effects , Cetrimonium/pharmacology , Plant Extracts/pharmacology , Salmonella typhimurium/drug effects , Sodium Dodecyl Sulfate/pharmacology , Colony Count, Microbial , Decontamination/methods , Food Microbiology , Microbial Sensitivity Tests , Plant Tumors , Polypropylenes , Quercus/chemistry , Stainless Steel , Surface-Active Agents/pharmacologyABSTRACT
α-Gels are often used as base materials for cosmetics and hair conditioners. α-Gel-based commercial products typically contain many types of additives, such as polymers, electrolytes, oily components, and other surfactants, in addition to the three basic components. However, few systematic studies have been conducted on the effect of such additives on α-gels. In this study, we chose surfactant as an example to initiate the effect of such additives on the structure and rheological properties of α-gel samples formulated using cetyl alcohol (C16OH) and cetyltrimethylammonium chloride (CTAC). Optical microscopy analysis demonstrated that the size of the vesicles in the α-gel samples in this study was decreased via the addition of hydrogenated soybean lecithin (HSL) and penta(oxyethylene) cetyl ether (C16EO5), a nonionic surfactant, to them. Rheological measurements revealed that at high C16OH/CTAC ratios, the viscosity and yield stress of the α-gel samples decreased owing to the addition of surfactants to them. Conversely, at low C16OH/CTAC ratios, the opposite tendency was observed. Small-angle X-ray scattering analysis indicated that for the α-gel samples with high C16OH/CTAC ratios, the addition of HSL or C16EO5 to them decreased the interlayer spacing of their lamellar bilayer stack, which led to the changes in the rheological properties of the α-gel samples.
Subject(s)
Fatty Alcohols/chemistry , Lecithins/chemistry , Surface-Active Agents/chemistry , Cations , Cetrimonium/chemistry , Cosmetics , Gels , ViscosityABSTRACT
Low bioavailability and poor water solubility have limited the utilization of curcumin in conventional dosing methods. As an alternative, microemulsions as drug carrier can improve curcumin delivery. A cetyltrimethylammonium bromide-nanocrystalline cellulose (CTAB-NCC)-based microemulsion was developed and its potential use as a topical delivery method for curcumin was investigated. The effect of microemulsion's particle size and its microstructure as well as the presence of the CTAB-NCC nanoparticle on the topical delivery of curcumin was studied. In vitro permeation studies showed higher penetration rate of curcumin from the oil-in-water type-microemulsions. The skin permeation profile of curcumin followed Higuchi release kinetics. Furthermore, use of the (CTAB-NCC)-based microemulsion enhanced curcumin accumulation in the skin and these system showed non cytotoxicity effect on L929 cell line. These results showed the potential of (CTAB-NCC)-based microemulsions as controlled-release topical systems for the delivery of curcumin and potentially other lipophilic drugs.
Subject(s)
Administration, Topical , Cellulose/chemistry , Cetrimonium/chemistry , Curcuma/chemistry , Curcumin/administration & dosage , Drug Carriers/chemistry , Emulsions/chemistry , Nanoparticles/chemistry , Plant Extracts/administration & dosage , Animals , Biological Availability , Cell Line , Curcuma/metabolism , Curcumin/metabolism , Drug Liberation , Female , Kinetics , Male , Mice , Nanoparticles/metabolism , Particle Size , Permeability , Plant Extracts/metabolism , Rats , Rats, Sprague-Dawley , Skin/drug effects , Skin/metabolism , SolubilityABSTRACT
This work reports the fabrication of magnetite (Fe3O4) nanoparticles (NPs) coated with various biocompatible surfactants such as glutamic acid (GA), citric acid (CA), polyethylene glycol (PEG), polyvinylpyrrolidine (PVP), ethylene diamine (EDA) and cetyl-trimethyl ammonium bromide (CTAB) via co-precipitation method and their comparative inductive heating ability for hyperthermia (HT) applications. X-ray and electron diffraction analyses validated the formation of well crystallined inverse spinel structured Fe3O4 NPs (crystallite size of ~ 8-10 nm). Magnetic studies confirmed the superparamagnetic (SPM) behaviour for all the NPs with substantial magnetisation (63-68 emu/g) and enhanced magnetic susceptibility is attributed to the greater number of occupations of Fe2+ ions in the lattice as revealed by X-ray photoelectron spectroscopy (XPS). Moreover, distinctive heating response (specific absorption rate, SAR from 130 to 44 W/g) of NPs with similar size and magnetisation is observed. The present study was successful in establishing a direct correlation between relaxation time (~ 9.42-15.92 ns) and heating efficiency of each surface functionalised NPs. Moreover, heat dissipated in different surface grafted NPs is found to be dependent on magnetic susceptibility, magnetic anisotropy and magnetic relaxation time. These results open very promising avenues to design surface functionalised magnetite NPs for effective HT applications.
Subject(s)
Hyperthermia, Induced/methods , Magnetite Nanoparticles/chemistry , Surface-Active Agents/chemistry , Calorimetry , Cetrimonium/chemistry , Chemical Precipitation , Citric Acid/chemistry , Glutamic Acid/chemistry , Humans , Hyperthermia, Induced/instrumentation , Magnetic Phenomena , Magnetite Nanoparticles/therapeutic use , Male , Photoelectron Spectroscopy , Polyethylene Glycols/chemistry , Prostatic Neoplasms/therapy , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
Graphene oxide (GO) has been proved with favorable affinity to U(VI), while some drawbacks such as poor dispersity and low adsorption performance limit its application. Herein, cetyltrimethylammonium bromide (CTAB) modified graphene oxide (MGO) composites were successfully fabricated, characterized and compared with graphene oxide (GO) in the sequestration of U(VI) in aqueous solutions. The results showed that maximum adsorption rate of MGO (99.21%) was obviously higher than that of GO (66.51%) under the same initial condition. Simultaneous introduction of C-H and NO coupled with the enhanced dispersity of GO after modification were mainly responsible for the updated performance verified with multiple characterization techniques. Based on the results of kinetics and isotherms investigations, the experimental data were best described by Pseudo-first-order kinetic model and Redlich-Peterson isotherm model. The results of ΔH, ΔS and ΔG show that adsorptive behaviors of uranyl ion on MGO are endothermic and spontaneous. The study provides a feasible alternative to the chemical modification of GO and enhancing the performance towards uranyl ion removal from solution.
Subject(s)
Graphite/chemistry , Uranium/chemistry , Water Pollutants, Chemical/chemistry , Adsorption , Cetrimonium/chemistry , Hydrogen-Ion Concentration , Ions , Kinetics , Microscopy, Electron, Scanning , Models, Chemical , Spectroscopy, Fourier Transform Infrared , Time Factors , Uranium/isolation & purification , Water , Water Pollutants, Chemical/isolation & purification , Water Pollutants, Radioactive/chemistry , Water Pollutants, Radioactive/isolation & purification , X-Ray DiffractionABSTRACT
In today's world, nanotechnology is reaching practically every ground and entering the human lifestyle by becoming a part of it. Thus, it is vital to check the cytotoxic and genotoxic effects of nanosubstances on plants, as they are the base constituent of ecosystem. The present work deals with the toxicity evaluation of metallosurfactant derived palladium oxide nanoparticles towards Allium sativum (Garlic cloves). The nanoparticles were prepared using microemulsion quenching method (a softer approach) using palladium metallosurfactants as precursors. The three ligands used were cetyltrimethylammonium chloride (CTAC), dodecylamine (DDA) and hexadecylamine (HEXA). Further, their characterization was done using TEM, Size Distribution curve, FESEM, EDS, XRD and Zeta potential. Garlic (Allium sativum) cloves were used to investigate the cytotoxicity and genotoxicity of fabricated PdO NPs. To check the cytotoxicity, optical microscopy was employed and for the genotoxic assessment, different parameters such as chromosomal aberrations in the mitosis, circular dichroism, and gel electrophoresis were utilized. From mitosis study, chromosomes aberrations were confirmed such as chromosomes stickiness, breakage, C-Mitosis, delay in anaphase, spindle fibre abnormality, laggard, vagrant and condensed chromosomes. Morphology of A. sativum clove, rooting and shooting pattern in the presence of PdO nanosuspension was observed. From all the experiments, it was concluded that all the three PdO nanosuspension are toxic in nature to both the cells and to genome, although, bishexadecyltrimethyl ammonium palladium tetrachloride (PdCTAC) Ns was found to be the most cytotoxic and genotoxic. Gel electrophoresis also confirmed the complete degradation of DNA in the presence of PdCTAC Ns.
Subject(s)
Chromosome Aberrations , DNA Damage/drug effects , Garlic/drug effects , Nanoparticles/toxicity , Palladium/toxicity , Amines/chemistry , Cetrimonium/chemistry , Circular Dichroism , Hydrocarbons/chemistry , Ligands , Microscopy, Electron, Transmission , Mitosis/drug effects , Mutagenicity Tests , Nanoparticles/chemistry , Palladium/chemistry , Particle Size , Plant Roots/drug effects , Plant Shoots/drug effectsABSTRACT
Herein the authors present the synthesis of surface functionalised mesoporous alumina (MeAl) for textural characterisation by a simplified sol-gel method obtained by using hexadecyltrimethylammonium bromide as a template. Etoricoxib (ETOX) was used as a model drug for the study. Alumina supported mesoporous material containing drug was characterised using instrumental technique namely Brunauer-Emmett-Teller surface area, Fourier transform-infrared, differential scanning calorimetry, transmission electron microscopy, X-ray diffraction, and field emission scanning electron microscopy. Diffusion study using a dialysis bag method used to check the release pattern of ETOX-loaded-MeAl. Results of characterisation study revealed the successful surface functionalisation of the drug on nanocomposite. The IC50 value obtained from cell viability study demonstrated the non-toxic behaviour of synthesised drug-loaded mesoporous alumina up to the tested concentration range. The present work has demonstrated that synthesised MeAl showed excellent stability with an expanded surface area suitable for carrier material for drug delivery system.
Subject(s)
Aluminum Oxide/chemical synthesis , Cetrimonium/chemistry , Chemistry, Pharmaceutical/methods , Drug Carriers/chemical synthesis , Nanotechnology/methods , Aluminum Oxide/chemistry , Dose-Response Relationship, Drug , Drug Carriers/chemistry , Drug Carriers/pharmacokinetics , Drug Compounding/methods , Drug Delivery Systems/methods , Drug Liberation , Etoricoxib/administration & dosage , Etoricoxib/pharmacokinetics , Materials Testing , Microscopy, Electron, Scanning , Phase Transition , Porosity , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
Dendrimers exhibit unique interactions with cell membranes, arising from their nanometric size and high surface area. To a great extent, these interactions define their biological activity and can be reported in situ by spin-labelling techniques. Schiff-base carbosilane ruthenium (II) metallodendrimers are promising antitumor agents with a mechanism of action yet to explore. In order to study their in situ interactions with model cell membranes occurring at a molecular level, namely cetyltrimethylammonium bromide micelles (CTAB) and lecithin liposomes (LEC), electron paramagnetic resonance (EPR) was selected. Both a spin probe, 4-(N,N-dimethyl-N-dodecyl)ammonium-2,2,6,6-tetramethylpiperidine-1-oxyl bromide (CAT12), able to enter the model membranes, and a spin label, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) covalently attached at newly synthesized heterofunctional dendrimers, were used to provide complementary information on the dendrimer-membrane interactions. The computer-aided EPR analysis demonstrated a good agreement between the results obtained for the spin probe and spin label experiments. Both points of view suggested the partial insertion of the dendrimer surface groups into the surfactant aggregates, mainly CTAB micelles, and the occurrence of both polar and hydrophobic interactions, while dendrimer-LEC interactions involved more polar interactions between surface groups. We found out that subtle changes in the dendrimer structure greatly modified their interacting abilities and, subsequently, their anticancer activity.
Subject(s)
Cell Membrane/chemistry , Dendrimers/chemistry , Organometallic Compounds/chemistry , Ruthenium/chemistry , Silanes/chemistry , Spin Labels , Cetrimonium/chemistry , Electron Spin Resonance Spectroscopy , Hydrophobic and Hydrophilic Interactions , Lecithins/chemistry , Liposomes/chemistry , Micelles , Models, Molecular , Surface PropertiesABSTRACT
Walnut shell biomass was used for the extraction of juglone by water as a solvent at room temperature. Upon addition of AgNO3 to a dye solution, prefect transparent pale brown color develops within the reaction time. UV-visible spectroscopy revealed the appearance of surface plasmon absorption (SRP) peak at 410â¯nm for spherical silver nanoparticles (AgNPs). Transmission electron microscopy suggested the formation of spherical and truncated triangular nano-plate geometry of AgNPs with average diameter 25â¯nm. Juglone-surfactant interactions (micellization and incorporation) have been studied spectrophotometrically by using cationic cetyltrimethylammonium bromide (CTAB). The presence of CTAB has significant impacts on size, shape and the size distribution of AgNPs. The nucleation, growth, and adsorption processes depend on the [CTAB]. It also catalyzes the Ag+ ions reduction by juglone with a rate enhancement of ca. 100-fold. Activation parameters (activation energy, enthalpy of activation and entropy of activation) were evaluated to the synthesis of silver nano-disks. Antioxidant activity of juglone was accessed by the scavenging effect on DPPH radical. Silver nanoparticles was also used as quencher to determine their interaction with bovine serum albumin (BSA). The quenching constant were found to be 1.4â¯×â¯103â¯M-1â¯Lâ¯s-1 and 4.8â¯×â¯103â¯M-1â¯Lâ¯s-1 for two BSA concentrations.
Subject(s)
Juglans/chemistry , Metal Nanoparticles/chemistry , Plant Extracts/chemistry , Serum Albumin, Bovine/chemistry , Silver/chemistry , Animals , Antioxidants/chemistry , Cattle , Cetrimonium/chemistry , Green Chemistry Technology , Juglans/metabolism , Metal Nanoparticles/toxicity , Microscopy, Electron, Transmission , Protein Binding , Serum Albumin, Bovine/metabolism , SpectrophotometryABSTRACT
In this research, a simple, rapid, and efficient air assisted - vesicle based microextraction (AAVME) approach was developed for the extraction of phenolic compounds and their analysis in different Melissa officinalis L. samples. The extraction method is based injection an aqueous mixture of CTAB and 5-methyl salicylic acid, into the hydroalcoholic plant extract in a conical test tube to form a cloudy solution. Suction and dispersion were then applied to accelerate the dispersion process. After centrifugation, the sediment phase was removed and injected into HPLC system. The optimized extraction conditions were as 450⯵L of a mixture of CTAB and 5-methyl salicylic acid (3:5â¯mol ratios), 10.0â¯mL sample solution at pH 8.0 and 30 suction-dispersion cycles. Under these extraction conditions, the proposed method was able to provide a good linearity (R2 ≥â¯0.9994) within the range of 0.5-2500.0â¯ngâ¯mL-1, low detection limits (0.1-0.5â¯ngâ¯mL-1), good extraction replicability (relative standard deviations below 3.5%, nâ¯=â¯7), and enrichment factors of 97-118. Finally, the developed method was successfully used for determining the mentioned analytes in Melissa officinalis samples. Recoveries for all compounds in real samples were between 82.5% and 91.8.
Subject(s)
Chemical Fractionation/methods , Melissa/chemistry , Phenols/analysis , Air , Cetrimonium/chemistry , Green Chemistry Technology , Phenols/chemistry , Phytochemicals/analysis , Plant Extracts/chemistry , Plant Leaves/chemistry , Plant Stems/chemistry , Salicylates/chemistryABSTRACT
This work introduces a new fibrous system for synergistic cancer therapy. The system consists of poly(d,l-lactic-co-glycolic acid) (PLGA) fibers with a core encapsulating an anticancer drug and a shell entrapping gold nanorods (AuNRs) as a photothermal agent. On exposure to NIR light, the photothermal agent generates heat to raise the local temperature of the fibers. If the temperature is above a glass transition (Tg) of the polymer, the polymer chains will be mobile, increasing free volume in size within the shell. As a result, a rapid release of the drug can be achieved. When NIR light is turned off, the release will stop with inactivity of the photothermal agent, followed by freezing the segmental motion of the polymer chains. The on-off switching of NIR light in a time-controllable manner allows a repeated and accurate release of the drug, leading to the significant enhancement of anticancer activity in combination with the hyperthermia effect arising from the photothermal agent.
Subject(s)
Antibiotics, Antineoplastic/pharmacology , Delayed-Action Preparations , Doxorubicin/pharmacology , Drug Delivery Systems/methods , Metal Nanoparticles/chemistry , Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , Antibiotics, Antineoplastic/chemistry , Cell Death/drug effects , Cell Line, Tumor , Cetrimonium/chemistry , Doxorubicin/chemistry , Drug Compounding/methods , Drug Liberation , Electrochemical Techniques , Epithelial Cells/drug effects , Epithelial Cells/metabolism , Epithelial Cells/pathology , Epithelial Cells/radiation effects , Female , Gold/chemistry , Humans , Hyperthermia, Induced/methods , Infrared Rays , Kinetics , Low-Level Light Therapy/methods , Metal Nanoparticles/ultrastructure , Nanotubes/chemistry , Nanotubes/ultrastructureABSTRACT
Phosphorus is one of the main limiting and strong influencing factors of eutrophication, and phosphorus controlling in lake is of great significance for eutrophication. To do this, sediment materials were taken from Dianchi Lake, a typically eutrophic lake, and modified by hexadecyltrimethylammonium bromide (CTAB) and ZnSO4 to remove phosphorus and inhibit alkaline phosphatase activity (APA). Results indicated that phosphorus removal efficiencies of sediments modified by CTAB (S-CTAB), ZnSO4 (S-Zn), and oxidized sediments (OS) were higher than that of the raw sediment (RS). Ability to absorb phosphorus varied, following the order S-Zn>S-CTAB>OS>RS. Sorption was influenced by ionic strength, with the former decreasing with the increase of the latter. Freundlich model well described the sorption isotherm, with an R2 ranging from 0.9168 to 0.9958. Furthermore, compared with the raw sediments, the maximum phosphorus sorption capacities of S-Zn and S-CTAB increased by 12.2% and 124.5%, respectively. Results of desorption studies suggest that the desorption rate of S-Zn was from 3.88 to 13.76%, lower than that of other sediment materials. APA was inhibited by S-CTAB and S-Zn at the same time, with inhibition rates from 29.6% and 61.0% when the concentrations of S-CTAB and S-Zn were 10 nmol L-1 and 0.2 nmol L-1, respectively. This study provides new insights into phosphorus removal and phosphatase activity inhibition in water treatment.