Preparation and preliminary quality evaluation of aspirin/L-glutamate compound pellets.

L-glutamate is an important component of protein. It can prevent gastrointestinal damage caused by NSAIDs. We constructed two-phase enteric-coated granules of aspirin and L-glutamate compound by extrusion spheronization method and fluidized bed coating. The subliminal effective dose of L-glutamate is 100 mg/kg tested by model of gastric ulcer of rats induced by aspirin and drug administration. HPLC-UV and UV-Vis methods were adopted to determine content and cumulative release of aspirin and L-glutamate as quality analysis method indexes. The prescription and process optimization were carried out with yield, sphericity and dissolution. The two-phase compound granules have good sphericity of 0.93 ± 0.05 (aspirin pellets) and 0.94 ± 0.02 (L-glutamate pellets), content of salicylic acid (0.24 ± 0.03)%, dissolution of aspirin (2.36 ± 0.11)%. Quality evaluation and preliminary stability meet the commercial requirements. The stored environment of compound preparation should be sealed in a cool and dark place.

Critical Tools in Tableting Research: Using Compaction Simulator and Quality by Design (QbD) to Evaluate Lubricants' Effect in Direct Compressible Formulation.

As commonly known, the product development stage is quite complex, requires intensive knowledge, and is time-consuming. The selection of the excipients with the proper functionality and their corresponding levels is critical to drug product performance. The objective of this study was to apply quality by design (QbD) principles for formulation development and to define the desired product quality profile (QTPP) and critical quality attributes (CQA) of a product. QbD is a risk- and science-based holistic approach for upgraded pharmaceutical development. In this study, Ibuprofen DC 85W was used as a model drug, Cellactose® 80 along with MicroceLac® 100 as a filler, and magnesium stearate, stearic acid, and sodium stearyl fumarate as lubricants. By applying different formulation parameters to the filler and lubricants, the QbD approach furthers the understanding of the effect of critical formulation and process parameters on CQAs and the contribution to the overall quality of the drug product. An experimental design study was conducted to determine the changes of the obtained outputs of the formulations, which were evaluated using the Modde Pro 12.1 statistical computer program that enables optimization by modeling complex relationships. The results of the optimum formulation revealed that MicroceLac® 100 was the superior filler, while magnesium stearate at 1% was the optimum lubricant. A design space that indicates the safety operation limits for the process and formulation variables was also created. This study enriches the understanding of the effect of excipients in formulation and assists in enhancing formulation design using experimental design and mathematical modeling methods in the frame of the QbD approach.

A review about industrialization of Chinese materia medica decoction pieces.

Chinese materia medica decoction pieces (CMMDPs), one of the three pillars of the Chinese materia medica industry, are a key link in the Chinese materia medica industrial chain. Industrialization is the only way for the modernization of CMMDPs. This review mainly summarizes the characteristics, history, current situation and prospect of CMMDPs industry, providing a new reference for promoting the flourishing development of the industrialization of CMMDPs and for serving massive health industry. The literature was collected from databases including Web of Science, PubMed, Elsevier and CNKI (Chinese). CMMDPs industry has the characteristics of regionalism, resource dependency, customer diversity and low industrial concentration. Deeply processed products include traditional Chinese medicine (TCM) formula granules, small-packed decoction pieces, ultrafine decoction pieces, puffed decoction pieces, compressed decoction pieces and instant decoction pieces. Integration of treatment and processing at the place of origin is emerging. However, there is still room for improvement, for example, the manufacturing technologies of CMMDPs industry need to be continually improved. The management of CMMDPs' normalized production also needs to be strengthened. The quality of CMMDPs should be strengthened supervision and it should establish the objective and feasible quality evaluation system for CMMDPs. At present, China has attached unprecedented importance to the development of TCM, and issued a number of supporting policies, sparing no effort to support its development.

An oligosaccharide-marker approach to quantify specific polysaccharides in herbal formula by LC-qTOF-MS: Danggui Buxue Tang, a case study.

Polysaccharides have broad bioactivities and are major components of water decoction of herb formulae. However, the quality control of polysaccharides remains a challenge. Oligosaccharide-fragment approach has been considered in elucidating chemical structures of polysaccharides, but never been used for quantitation. Using reference chemicals and a real sample Danggui Buxue Tang (DBT) in this study, an oligosaccharide-marker approach was established to quantify specific polysaccharides. Firstly, linear relationships between parent polysaccharides and hydrolysis-produced daughter oligosaccharides were verified using reference polysaccharides. Then in case of DBT, two fluorescence-labeled oligosaccharides with high specificity to individual parent polysaccharides were selected as markers. They were easily isolated and identified. Their potential in quantification of parent polysaccharides were satisfactorily validated in terms of linearity (r≥0.99), repeatability (RSD ≤ 8.4 %), and spike recovery (≥80 %). This method could be a promising approach for quality assessment of polysaccharides in herbal formulae.

Changes in Manufacturing Processes of Biologic Therapies Can Alter the Immunogenicity Profile of the Product.

Manufacturing process changes may alter the characteristics of a protein therapeutic. In 2009, somatropin (version 1.0), a recombinant human growth hormone therapeutic, underwent a manufacturing update (version 1.1). The immunogenicity of somatropin version 1.1 as a daily subcutaneous injection was evaluated in 2014 in a prospective, open-label, single-arm clinical study of treatment-naive pediatric patients with idiopathic human growth hormone deficiency for 1 year. The primary end point was the proportion of patients who developed antidrug antibodies (ADAs) after treatment. Eighty-two patients were enrolled. The mean (SD) treatment duration was 347 (53) days. The incidence of ADAs was 3.7%. No neutralizing antibodies were observed in the three patients with ADA-positive samples. Two patients (2.6%) had growth attenuation, but they were not ADA positive. The manufacturing changes for somatropin version 1.1 resulted in a similar safety and efficacy profile compared with somatropin version 1.0 and a different immunogenicity profile with a lower incidence of ADAs.

Effects of Dissolution Medium pH and Simulated Gastrointestinal Contraction on Drug Release From Nifedipine Extended-Release Tablets.

In contrast to nifedipine matrix-based extended-release dosage forms, the osmotic pump drug delivery systems have a zero-order drug release independent of external variables such as pH, agitation rate, and dissolution media. The objective of this study focuses on the in vitro evaluation of the mechanical properties of osmotic pump and polymer matrix-based formulations in dissolution media, and the potential impacts that media pH and simulated gastrointestinal contraction have on drug release. Two strengths of osmotic pump product A and polymer matrix-based product B were used in this study. An in-house system was developed with the capability of applying mechanical compression and monitoring mechanical properties of sample during dissolution testing. A United States Pharmacopeia or an in-house apparatus was used for dissolution testing under various conditions. Compared to the product A, the mechanical properties of the product B change significantly at various pHs and mechanical compressions. The results suggest that polymer matrix-based products bear a risk of formulation-related interactions with the gastrointestinal tract during in vivo drug dissolution, especially in the case of concomitant pH and gastric contractile changes. Modified dissolution testing devices may help formulation scientists in product development and provide regulatory agencies with an additional metric for quality assurance of drug products.

Risk-Based Comparability Assessment for Monoclonal Antibodies During Drug Development: A Clinical Pharmacology Perspective.

Due to complexities in the structure, function, and manufacturing process of antibody-based therapeutic proteins, comparability assessment for supporting manufacturing changes can sometimes be a challenging task. Regulatory guidance recommends a hierarchical risk-based approach, starting with Chemistry, Manufacturing, and Controls (CMC) analytical characterizations, followed by non-clinical and/or clinical studies to ensure that any potential changes in quality attributes have no adverse impact on efficacy and safety of the product. This review focuses on the changes in quality attributes which may potentially affect the pharmacokinetics (PK), pharmacodynamics (PD), and immunogenicity of a monoclonal antibody (mAb) product, and provides general guidelines in designing non-clinical and clinical PK/PD studies to help support comparability assessments. A decision tree for comparability assessment is proposed depending on the nature of the changes in quality attributes, the potential impact of such changes, and the timing of the manufacturing change relative to the development process. Ideally, the optimization of manufacturing process should take place in the early stage of drug development (i.e., preclinical to phase 2a) as more stringent comparability criteria would have to be met if manufacturing changes occur in the late stage of drug development (i.e., phase 2b and after), and consequently, major changes in manufacturing process should be avoided during confirmatory phase 3 studies and post-approval of drug products.

Applying risk management to analytical methods for the desorbing process of ginkgo diterpene lactone meglumine injection.

Analysis errors can occur in the desorbing process of ginkgo diterpene lactone meglumine injection (GDMI) by a conventional analysis method, due to several factors, such as easily crystallized samples, solvent volatility, time-consuming sample pre-processing, fixed method, and offline analysis. Based on risk management, near-infrared (NIR) and mid-infrared (MIR) spectroscopy techniques were introduced to solve the above problems with the advantage of timely analysis and non-destructive nature towards samples. The objective of the present study was to identify the feasibility of using NIR or MIR spectroscopy techniques to increase the analysis accuracy of samples from the desorbing process of GDMI. Quantitative models of NIR and MIR were established based on partial least square method and the performances were calculated. Compared to NIR model, MIR model showed greater accuracy and applicability for the analysis of the GDMI desorbing solutions. The relative errors of the concentrations of Ginkgolide A (GA) and Ginkgolide B (GB) were 2.40% and 2.89%, respectively, which were less than 5.00%. The research demonstrated the potential of the MIR spectroscopy technique for the rapid and non-destructive quantitative analysis of the concentrations of GA and GB.

Control Strategies for Drug Product Continuous Direct Compression-State of Control, Product Collection Strategies, and Startup/Shutdown Operations for the Production of Clinical Trial Materials and Commercial Products.

Continuous manufacturing (CM) has emerged in the pharmaceutical industry as a paradigm shift with significant advantages related to cost, efficiency, flexibility, and higher assurance of quality. The inherent differences from batch processes justify examining the CM control strategy more holistically. This article describes the current thinking for the control and implementation of CM, using the example of a direct compression process and taking into consideration the ICH Q10 definition of "state of control" and process validation requirements. Statistical process control using control charts, sources of variation, process capability, and process performance is explained as a useful concept that can help assess the impact of variation within a batch and indicates if a process is in state of control. The potential for time-variant nature of startup and shutdown with CM is discussed to assure product quality while minimizing waste as well as different options for detection and isolation of non-conforming materials due to process upsets. While different levels of control are possible with CM, an appropriate balance between process control and end product testing is needed depending on the level of process understanding at the different stages of development from the production of clinical supplies through commercialization.

A new approach to the rapid separation of isomeric compounds in a Silybum marianum extract using UHPLC core-shell column with F5 stationary phase.

In this paper, a new ultra-high performance liquid chromatography (UHPLC) method using a core-shell column with a pentafluorophenyl stationary phase for separation of seven active compounds of a Silybum marianum extract was developed and validated. Silymarin, an extract of Silybum marianum, is known for its abilities to protect the liver from toxic substances, hepatitis therapy, and anti-tumour activity. Silymarin is currently being widely used in commercial preparations and herbal teas. Separation of seven compounds contained in the Silybum marianum extract (taxifolin, silychristin, silydianin, silybin A, silybin B, isosilybin A, isosilybin B) and other substances occurring in real samples was performed on the Kinetex 1.7µ F5 100A (150×2.1mm), 1.7µm particle size core-shell column, with a mobile phase methanol/100mM phosphate buffer pH 2.0 according to the gradient program. A mobile phase 0.35mLmin-1 flow rate and 50°C temperature was used for the separation. The detection wavelength was set at 288nm. Under optimal chromatographic conditions, good linearity with a correlation coefficient of R2 >0.999 for all compounds was achieved. The available commercial samples of herbal teas and food supplements were extracted with methanol using an ultrasonic bath. After dilution with water and centrifugation, a 2µL sample of the filtered supernatant was directly injected into the UHPLC system. The use of a pentafluorophenyl stationary phase with methanol as the organic component of the mobile phase showed new ways to effectively separate isomeric compounds in herbal extracts, which could not be done with the conventional C18 stationary phase.

Development, validation, and application of ELISA for detection of anti-HD105 antibodies in pre-clinical safety evaluation using monkeys.

Unwanted immunogenicity of protein therapeutics can result in severe side effects and should be assessed in animals before applying the treatment to humans. Monkeys are the most relevant choice for pre-clinical toxicity testing of antibody-based therapeutics. To assess the immunogenicity of HD105, a novel antibody therapeutic that targets both vascular endothelial growth factor and Delta-like-ligand 4, a bridging enzyme-linked immunosorbent assay was developed as an anti-drug antibody (ADA) assay and validated for use in pre-clinical studies using non-human primates. This method was found to have suitable assay sensitivity, intra- and inter-assay precision, confirmation, drug tolerance, recovery, and sample stability for measuring ADA in monkey serum samples. The results showed that ADA elevation occurred following repeated doses of HD105, and that ADA production was negatively associated with serum HD105 concentration. These results suggest that intravenous administration of HD105 induces production of ADA in monkeys and that the detection of ADA may be negatively influenced by free HD105 in serum.

New aspects of developing a dry powder inhalation formulation applying the quality-by-design approach.

The current work outlines the application of an up-to-date and regulatory-based pharmaceutical quality management method, applied as a new development concept in the process of formulating dry powder inhalation systems (DPIs). According to the Quality by Design (QbD) methodology and Risk Assessment (RA) thinking, a mannitol based co-spray dried formula was produced as a model dosage form with meloxicam as the model active agent. The concept and the elements of the QbD approach (regarding its systemic, scientific, risk-based, holistic, and proactive nature with defined steps for pharmaceutical development), as well as the experimental drug formulation (including the technological parameters assessed and the methods and processes applied) are described in the current paper. Findings of the QbD based theoretical prediction and the results of the experimental development are compared and presented. Characteristics of the developed end-product were in correlation with the predictions, and all data were confirmed by the relevant results of the in vitro investigations. These results support the importance of using the QbD approach in new drug formulation, and prove its good usability in the early development process of DPIs. This innovative formulation technology and product appear to have a great potential in pulmonary drug delivery.

Influence of herbal combinations on the extraction efficiencies of chemical compounds from Cinnamomum cassia, Paeonia lactiflora, and Glycyrrhiza uralensis, the herbal components of Gyeji-tang, evaluated by HPLC method.

During decoction process, the ingredients of herbal formula interact with each other, such that therapeutic properties and chemical extraction characteristics are altered. The crude drugs, Cinnamomum cassia (CC), Paeonia lactiflora (PL), and Glycyrrhiza uralensis (GU), are the main herbal constituents of Gyeji-tang, a traditional herbal formula. To evaluate the chemical interaction between CC, PL, and GU during the course of decoction, quantification of 16 marker compounds in the herbal decoction, performed using a Box-Behnken experimental design, was carried out by HPLC-diode array detection using validated method. Correlations between the amounts of marker compounds from CC, PL, and GU were assessed by multiple regression analysis. The results obtained showed that amounts of single herb marker compounds significantly changed (usually decreased) by decoction in the presence of other herbs and that these changes depended on the chemical natures of the markers and the herbal medicines present. Results also demonstrated that the extraction efficiencies of marker compounds increased when the proportion of the herb containing them was increased and decreased in proportion to amounts of herbs added. In conclusion, chemical interactions between compositional herbal medicines may occur when herbs are co-decocted. This study provides insight of understanding the herbal interactions in herbal formulae.

[Near infrared spectroscopy based process trajectory technology and its application in monitoring and controlling of traditional Chinese medicine manufacturing process].

In this paper, the principle of NIRS (near infrared spectroscopy)-based process trajectory technology was introduced.The main steps of the technique include:① in-line collection of the processes spectra of different technics; ② unfolding of the 3-D process spectra;③ determination of the process trajectories and their normal limits;④ monitoring of the new batches with the established MSPC (multivariate statistical process control) models.Applications of the technology in the chemical and biological medicines were reviewed briefly. By a comprehensive introduction of our feasibility research on the monitoring of traditional Chinese medicine technical process using NIRS-based multivariate process trajectories, several important problems of the practical applications which need urgent solutions are proposed, and also the application prospect of the NIRS-based process trajectory technology is fully discussed and put forward in the end.

[Development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry].

To elucidate the key issues in the development and innovation of traditional Chinese medicine processing discipline and Chinese herbal pieces industry Chinese herbal pieces industry. According to the author's accumulated experience over years and demand of the development of the Chinese herbal pieces industry, the key issues in the development and innovation on the Chinese herbal pieces industry were summarized. According to the author, the traditional Chinese medicine processing discipline shall focus on a application basis research. The development of this discipline should be closely related to the development of Chinese herbal pieces. The traditional Chinese medicine processing discipline can be improved and its results can be transformed only if this discipline were correlated with the Chinese herbal pieces industry, matched with the development of the Chinese herbal pieces industry, and solved the problems in the development on the Chinese herbal pieces industry. The development of traditional Chinese medicine processing discipline and the Chinese herbal pieces industry also requires scientific researchers to make constant innovations, realize the specialty of the researches, and innovate based on inheritance.

A validated LC/UV method for the determination of four adulterating drugs in herbal slimming capsules.

A simple LC/UV method for the simultaneous identification and quantification of Fluoxetine, Tiratricol, Benfluorex and Pseudoephedrine in slimming formulation is proposed. The method demonstrated effective in the analyses of herbal mixtures marketed in Italy as slimming capsules. Sixteen different herbal mixtures, selected among the most frequently compounded in Italian pharmacies, were tested as matrices. HPLC analyses were performed in a gradient mode on a C18 stationary phase The method was validated for accuracy, precision, linearity and selectivity. The limits of detection (LOD) were 3.4 µg/mL for Pseudoephedrine, 1.1 µg/mL for Triac, 0.9 µg/mL for Fluoxetine, and 0.8 µg/mL for Benfluorex. Repeatability and intermediate precision, expressed as percent of relative standard deviation, ranged from 3 to 7 and from 7 to 12, respectively. Given these limits, the developed method is proposed for the simple and cost effective screening of herbal products illegally adulterated with these four drugs known to enhance slimming effects.

Comparison of three development approaches for Stationary Phase Optimised Selectivity Liquid Chromatography based screening methods Part I: A heterogeneous group of molecules (slimming agents in food supplements).

Three approaches for the development of a screening method to detect adulterated dietary supplement, based on Stationary Phase Optimised Selectivity Liquid Chromatography were compared for their easiness/speed of development and the performance of the optimal method obtained. This comparison was performed for a heterogeneous group of molecules, i.e. slimming agents (Part I) and a group of structural analogues, i.e. PDE-5 inhibitors (Part II). The first approach makes use of primary runs at one isocratic level, the second of primary runs in gradient mode and the third of primary runs at three isocratic levels to calculate the optimal combination of segments of stationary phases. In each approach the selection of the stationary phase was followed by a gradient optimisation. For the slimming agents, the heterogeneous group of molecules, the method obtained with the first approach was selected as optimal, based on the speed of development and the performance of the method. The method shows a good separation of the compounds, allowing the screening to be performed with diode array detection, and is fully compatible with mass spectrometry. The method was validated for its selectivity following the guidelines as described for the screening of pesticide residues and residues of veterinary medicines in food.

[Formula Optimization in Renshen Jianxin Capsule Based on Uniform Design and Anti-myocardial Ischemia Effect].

OBJECTIVE: To realize quadratic formula optimization of Renshen Jianxin Capsule (RJC) by screening Chinese herbs with major anti-myocardial ischemia effect in RJC and optimize their optimal dosages. METHODS: By following "uniform design-pharmacodynamic experiment-mathematical modeling-formula optimization", authors employed U10(10(8)) uniform design in the experiment. Eight Chinese herbs contained in RJC were taken as observatory factors. Electrocardiograph (ECG) changes of myocardial ischemia induced by isoproterenol were taken as pharmacodynamic indices. The mathematical model between herbal factors and pharmacodynamic indices was established using stepwise regression analysis to screen Chinese herbs with major anti-myocardial ischemia effect. Their optimal dosages were optimized using the grid algorithm. RESULTS: The regression equation was y =1. 7889 -0. 3247 Ginseng xSalvia Miltiorrhiza -0. 0663 Astragalus membranaceus xOriental Waterplantain tuber. Forecasting factors included were Ginseng, Salvia Miltiorrhiza, Astragalus membranaceus, and Oriental Waterplantain tuber. The optimal formula dosage calculated by the grid algorithm was Ginseng 1. 62 g, Astragalus membranaceus 4. 62 g, Salvia Miltiorrhiza 2. 43 g, and Oriental Waterplantain tuber 1. 66 g. CONCLUSION: Uniform design combined with stepwise regression analysis and grid algorithm were able to realize quadratic formula optimization of RJC.

[Effect of Jianpi Yangzheng Xiaozheng Recipe on Apoptosis and Autophagy of Subcutaneous Transplanted Tumor in Nude Mice: an Experimental Study on Mechanism].

OBJECTIVE: To observe the effect of Jianpi Yangzheng Xiaozheng Recipe (JYXR) on the tumor inhibition rate of subcutaneous transplanted tumor gastric cancer cell line MGC-803 in BALB/c nude mice, and to study its molecular mechanism of apoptosis and autophagy. METHODS: Gastric cancer cell line MGC-803 was subcutaneously inoculated to nude mice for preparing transplanted gastric cancer models. Totally 32 BALB/c nude mice were randomly divided into 4 groups according to random digit table, i.e., the negative control group, the positive control group, the high dose JYXR group, the low dose JYXR group, 8 in each group. Normal saline was administered to mice in the negative control group by gastrogavage. 5-fluorouracil (5-Fu) at 2. 5 mg/kg was administered to mice in the positive control group by gastrogavage. JYXR at 85 and 43 g/kg was administered to mice in the high dose JYXR group and the low dose JYXR group by gastrogavage, once per day for 10 successive days. The effect of JYXR on the tumor inhibition rate of subcutaneous transplanted tumor was observed. Effects of JYXR on gene expression levels of Bax, Bcl-2, Fas, Cyclin D1, Cyclin D2, and Cyclin D3 in transplanted tumor were observed by real-time PCR. Effects of JYXR on protein expression levels of Procaspase-3, Procaspase-8, Procaspase-9, cleaved-PARP, Beclin-1, and LC3B were detected using Western blot. RESULTS: (1) Compared with the negative control group, the tumor weight was obviously reduced in the rest three groups (P <0. 05). The tumor weight was higher in the high dose JYXR group and the low dose JYXR group than in the positive control group (P <0. 05). (2) Results of RT-PCR indicated that, compared with the negative control group, expression levels of Bax were up-regulated, but expression levels of Bcl-2, Cyclin D1, Cyclin D2, and Cyclin D3 were down-regulated in the positive control group and JYXR groups (P <0. 05). The expression level of Fas was up-regulated in the positive control group and the high dose JYXR group (P <0. 05). Compared with the positive control group, expression levels of Fas, and Bax were all down-regulated, but expression levels of Bcl-2, Cyclin D2, and Cyclin D3 were all up-regulated in the high dose JYXR group and the low dose JYXR group (all P <0. 05). The expression level of Cyclin D1 was down-regulated in the high dose JYXR group, but it was up-regulated in the low dose JYXR group ( both P <0. 05). (3) Results of Western blot showed, compared with the negative control group, expression levels of Procaspase-3, Procaspase-8, and Procaspase-9 were down-regulated, but expression levels of cleaved-PARP, Beclin-1, and LC3B II were up-regulated in the high dose JYXR group and the low dose JYXR group (all P <0.05). Compared with the negative control group, expression levels of Procaspase-3, Procaspase-8, Procaspase-9, and LC3B II were down-regulated, but expression levels of cleaved-PARP, Beclin-1, and LC3B I were up-regulated in the positive control group (all P <0. 05). CONCLUSIONS: JYXR showed significant inhibition on subcutaneous transplanted tumor gastric cancer cell line MGC-803 in BALB/c nude mice. Its mechanism might be associated with activating apoptosis and autophagy correlated factors.