A universal dual-mode hydrogel array based on phage-DNA probe for simultaneous rapid screening and precisely quantitative detection of Escherichia coli O157:H7 in foods by the fluorescent/microfluidic chip electrophoresis methods.

Rapid and specific detection of virulent bacterial strains is a great challenge for food safety regarding large amounts of contaminated samples. Herein, a dual-mode hydrogel array biosensor was constructed to simultaneously rapidly screen and precisely quantitatively detect virulent Escherichia coli O157:H7 (E. coli O157:H7) based on a novel DNA-modified phage probe. First, E. coli O157:H7 was incubated with alginate to form the E. coli O157:H7/hydrogel premix complex. Subsequently, hydrogel formation by cross-linking upon the addition of calcium ions and phages for E. coli O157:H7 modified with a DNA primer (phage-DNA) was added to the alginate hydrogel. The DNA on the complex could trigger rolling circle amplification (RCA) to form a phage probe containing a long-chain DNA skeleton (phage@RCA-DNA). The RCA-DNA was then hybridized with the complementary DNA (cDNA) to form double-stranded DNA fragments (phage@RCA-dsDNA), which could be stained by the SYBR Green dye to emit visual green fluorescence (FL) and determined by a smartphone for rapid screening. Meanwhile, the unreacted cDNA in the supernatant could be quantitatively detected by microfluidic chip electrophoresis (MCE). The signal decrement was also proportional to the bacterial concentration. The detection limit values of E. coli O157:H7 were 50 CFU mL-1 by the FL signal and 6 CFU mL-1 by the MCE signal. The two results could be mutually corrected to decrease the false-positive results. This assay was also employed to detect virulent Salmonella Typhimurium (S. Typhimurium) using the corresponding S. Typhimurium phage@RCA-DNA probe. All these results demonstrated that the universal bioassay was suitable for simultaneous rapid screening and precisely quantitative detection of virulent bacterial strains.

Recent advances in DNA-based probes for photoacoustic imaging.

Photoacoustic imaging(PAI) is a widely developing imaging modality that has seen tremendous evolvement in the last decade. PAI has gained the upper hand in the imaging field as it takes advantage of optical absorption and ultrasound detection that imparts higher resolution, rich contrast and elevated penetration depth. Unlike other imaging techniques, PAI does not use ionising radiation and is a better, cost-effective and healthier alternative to other imaging techniques. It offers greater specificity than conventional ultrasound imaging with the ability to detect haemoglobin, lipids, water and other light-absorbing chromophores. These properties of PAI have led to its extended applications in the biomedical field in the treatment of diseases such as cancer. This paper reviews how DNA probes have been used in PAI, the various techniques by which it has been modified, and their role in the process. We also focus on different nanocomposites containing DNA having PAI and photothermal therapy(PTT) properties for detection, diagnosis and therapy, its constituents and the role of DNA in it.

Development of an electrochemical DNA-based biosensor for the detection of the cardiovascular pharmacogenetic-altering SNP CYP2C9*3.

Cardiovascular diseases are among the major causes of mortality and morbidity. Warfarin is often prescribed for these disorders, an anticoagulant with inter and intra-dosage variability dose required to achieve the target international normalized ratio. Warfarin presents a narrow therapeutic index, and due to its variability, it can often be associated with the risk of hemorrhage, or in other patients, thromboembolism. Single-nucleotide polymorphisms are included in the causes that contribute to this variability. The Cytochrome P450 (CYP) 2C9*3 genetic polymorphism modifies its enzymatic activity, and hence warfarin's plasmatic concentration. Thus, the need for a selective, rapid, low-cost, and real-time detection device is crucial before prescribing warfarin. In this work, a disposable electrochemical DNA-based biosensor capable of detecting CYP2C9*3 polymorphism was developed. By analyzing genomic databases, two specific 78 base pairs DNA probes; one with the wild-type adenine (Target-A) and another with the cytosine (Target-C) single-nucleotide genetic variation were designed. The biosensor implied the immobilization on screen-printed gold electrodes of a self-assembled monolayer composed by mercaptohexanol and a linear CYP2C9*3 DNA-capture probe. To improve the selectivity and avoid secondary structures a sandwich format of the CYP2C9*3 allele was designed using complementary fluorescein isothiocyanate-labeled signaling DNA probe and enzymatic amplification of the electrochemical signal. Chronoamperometric measurements were performed at a range of 0.015-1.00 nM for both DNA targets achieving limit of detection of 42 p.m. The developed DNA-based biosensor was able to discriminate between the two synthetic target DNA targets, as well as the targeted denatured genomic DNA, extracted from volunteers genotyped as non-variant homozygous (A/A) and heterozygous (A/C) of the CYP2C9*3 polymorphism.

Contractile Hairpin DNA-Mediated Dual-Mode Strategy for Simultaneous Quantification of Lactoferrin and Iron Ion by Surface-Enhanced Raman Scattering and Fluorescence Analysis.

DNA-mediated self-assembly technology with good sensitivity and affinity ability has been rapidly developed in the field of probe sensing. The efficient and accurate quantification of lactoferrin (Lac) and iron ions (Fe3+) in human serum and milk samples by the probe sensing method can provide useful clues for human health and early diagnosis of anemia. In this paper, contractile hairpin DNA-mediated dual-mode probes of Fe3O4/Ag-ZIF8/graphitic quantum dot (Fe3O4/Ag-ZIF8/GQD) NPs were prepared to realize the simultaneous quantification of Lac by surface-enhanced Raman scattering (SERS) and Fe3+ by fluorescence (FL). In the presence of targets, these dual-mode probes would be triggered by the recognition of aptamer and release GQDs to produce FL response. Meanwhile, the complementary DNA began to shrink and form a new hairpin structure on the surface of Fe3O4/Ag, which produced hot spots and generated a good SERS response. Thus, the proposed dual-mode analytical strategy possessed excellent selectivity, sensitivity, and accuracy due to the dual-mode switchable signals from "off" to "on" in SERS mode and from "on" to "off" in FL mode. Under the optimized conditions, a good linear range was obtained in the range of 0.5-100.0 µg/L for Lac and 0.01-5.0 µmol/L for Fe3+ and with detection limits of 0.14 µg/L and 3.8 nmol/L, respectively. Finally, the contractile hairpin DNA-mediated SERS-FL dual-mode probes were successfully applied in the simultaneous quantification of iron ion and Lac in human serum and milk samples.

Detection of Matrix Metalloproteinase-1 in Human Saliva Based on a Pregnancy Test Strip Platform.

Matrix metalloproteinase (MMP) is closely correlated with tumorigenesis and progression. Establishing a low-cost, simple, rapid, and sensitive method for its detection is highly desired for the broad-spectrum screening of oral cancer. Herein, we combine the MMP-specific cleavage ability with magnetic separation technology and a commercial test strip to construct a sensitive biosensor to detect MMP-1 conveniently for the first time. The method involves two DNA probes, peptide-DNA1 and hCG-DNA2, where DNA1 and DNA2 are complementary sequences, and the peptide labeled with biotin can bind streptavidin-modified magnetic nanoparticles stably. The human chorionic gonadotropin (hCG) is the target of the pregnancy test strip. The cleavage reaction mediated by MMP-1 releases peptide-DNA1 and the hybridized hCG-DNA2 into the solution, and the hCG probe in the solution can develop color on the test strip for the determination of MMP-1 after magnetic separation. This method utilizes the high specificity of MMP-1's proteolytic cleavage and the high sensitivity of the test strip to the target probe, achieving a sensitive detection of MMP-1 with a visual detection limit of 65.5 pg/mL. The method shows better anti-interference and sensitivity than the enzyme-linked immunosorbent assay in the application of a biological sample matrix, suggesting its great potential for clinical diagnosis, especially for broad-spectrum oral cancer screening.

Sensitive Imaging of Cellular RNA via Cascaded Proximity-Induced Fluorogenic Reactions.

Owing to its important biological functions, RNA has become a promising molecular biomarker of various diseases. With a dynamic change in its expression level and a relatively low amount within the complicated biological matrix, signal amplification detection based on DNA probes has been put forward, which is helpful for early diagnosis and prognostic prediction. However, conventional methods are confined to cell lysates or dead cells and are not only time-consuming in sample preparation but also inaccessible to the spatial-temporal information of target RNAs. To achieve live-cell imaging of specific RNAs, both the detection sensitivity and intracellular delivery issues should be addressed. Herein, a new cascaded fluorogenic system based on the combination of hybridization chain reactions (HCRs) and proximity-induced bioorthogonal chemistry is developed, in which a bioorthogonal reaction pair (a tetrazine-quenched dye and its complementary dienophile) is brought into spatial proximity upon target RNA triggering the HCR to turn on and amplify the fluorescence in one step, sensitively indicating the cellular distribution of RNA with minimal false positive results caused by unspecific degradation. Facilitated by a biodegradable carrier based on black phosphorus with high loading capacity and excellent biocompatibility, the resulting imaging platform allows wash-free tracking of target RNAs inside living cells.

pH-responsive DNA hydrogels with ratiometric fluorescence for accurate detection of miRNA-21.

DNA hydrogels are powerful candidates for stable and sensitive detection of disease-related nucleic acids. However, the ability to accurately detect is the cornerstone of disease diagnosis. To improve the accuracy of DNA hydrogels for detecting targets, we herein reported the design of pH-responsive DNA hydrogels with ratiometric fluorescence. The DNA hydrogels were prepared from the pH-sensitive ZnO-NH2 and CO-Y-DNA probe assembled by the three complementary strands. With the use of miRNA-21 as the model analyte, the DNA hydrogels were applied to fluorescence ratio detection. Under acidic conditions, the ZnO-NH2 was decomposed, thereby releasing the CO-Y-DNA probe. Target miRNA-21 hybridized to the CO-Y-DNA probe, causing the change of fluorescence ratio between TAMRA and Cy5 that both modified in the CO-Y-DNA probe. The developed DNA hydrogels exhibited high accuracy and sensitivity with a low detection limit to 83 pM. In addition, the DNA hydrogels showed long-term stability against DNase I and GSH.

Endogenous MicroRNA Accurate Diagnostics to Guide Photothermal Therapy.

Developing an intelligent theranostic nanoplatform with satisfied diagnostic accuracy and therapeutic efficiency holds great promise for personalized nanomedicine. Herein, we constructed a smart nanodevice for the accurate diagnosis of endogenous cancer microRNA (miRNA) biomarkers and efficient photothermal therapy (PTT). The nanodevice was composed of polydopamine (PDA)-functionalized CuS nanosheets (CuS@PDA NSs) and three elaborate DNA hairpin probes (TDHPs). The CuS@PDA NSs acted as efficient delivery vehicles and photothermal agents. They provided a large surface area available for an efficient and facile loading of TDHPs and a high-fluorescence (FL) quenching performance to achieve an ultralow background signal. The intracellular miRNA triggered TDHPs to assemble into three-arm branched junction structures for a strong fluorescence recovery as output signals to discriminate cancer cells from normal cells with an excellent sensitivity. The CuS@PAD NSs showed a good photothermal conversion efficiency in the near-infrared II (NIR II) region to mediate a good photothermal performance to kill cancer cells. A remarkable antitumor therapeutic effect was achieved in vivo. This work integrated highly sensitive detection to endogenous cancer biomarkers and valid therapeutic potency to tumor-bearing mice, indicating its promising biomedical applications.

An electrochemiluminescence biosensor for cadmium ion based on target-induced strand displacement amplification and magnetic Fe3O4-GO nanosheets.

Taking advantage of an exquisite hairpin DNA for strand displacement amplification (SDA) and the magnetic Fe3O4-graphene oxide nanosheets (MGN) as the carrier, an immobilization-free ECL biosensor was constructed for ultra-trace detection of Cd2+. Firstly, the ECL probe Ru (phen)32+ easily diffuses in the solution and reaches the electrode surface to induce strong ECL signal. This is because the pre-designed hairpin DNA is constrained by MGN in the absence of Cd2+. The presence of Cd2+ releases cDNA by binding to its corresponding aptamer, leading to removal of hairpin DNA away from the surface of MGN. In this case, SDA amplification was evoked and generated numerous dsDNA which further trapped Ru (phen)32+ in its groove. It is difficult for the embedded ECL probe to touch the electrode surface to generate ECL signal. Therefore, the concentration of Cd2+ was monitored according to the attenuation of ECL signal. This method showed high sensitivity to Cd2+ with a detection limit of 1.1 × 10-4 ppb. Moreover, it not only avoids many condition optimizations required in the conventional SDA method, but also circumvent the modification and immobilization of DNA probe. This sensor is further applied in the detection of Cd2+ in the sample of traditional Chinese medicine.

A Dual-Color Tyr-FISH Method for Visualizing Genes/Markers on Plant Chromosomes to Create Integrated Genetic and Cytogenetic Maps.

In situ imaging of molecular markers on a physical chromosome is an indispensable tool for refining genetic maps and validation genome assembly at the chromosomal level. Despite the tremendous progress in genome sequencing, the plant genome assembly at the chromosome level remains a challenge. Recently developed optical and Hi-C mapping are aimed at assistance in genome assembly. For high confidence in the genome assembly at chromosome level, more independent approaches are required. The present study is aimed at refining an ultrasensitive Tyr-FISH technique and developing a reliable and simple method of in situ mapping of a short unique DNA sequences on plant chromosomes. We have carefully analyzed the critical steps of the Tyr-FISH to find out the reasons behind the flaws of this technique. The accurate visualization of markers/genes appeared to be significantly dependent on the means of chromosome slide preparation, probe design and labeling, and high stringency washing. Appropriate adjustment of these steps allowed us to detect a short DNA sequence of 1.6 Kb with a frequency of 51.6%. Based on our results, we developed a more reliable and simple protocol for dual-color Tyr-FISH visualization of unique short DNA sequences on plant chromosomes. This new protocol can allow for more accurate determination of the physical distance between markers and can be applied for faster integration of genetic and cytogenetic maps.

High-Fidelity and Simultaneous Sensing of Endogenous Mutant and Wild p53 Proteins for Precise Cancer Diagnosis and Drug Screening.

The simultaneous sensing of endogenous wild and mutant proteins plays a critical role in disease diagnosis and drug screening, and this remains a major current challenge. Here, we present a new and highly specific target-triggered dual proximity ligation assay (dPLA) strategy for sensitive and simultaneous sensing of wild and mutant p53 proteins from cancer cells. Two proximity DNA probes bind the target protein to form the primer/circular DNA template complexes with two nicks in the presence of the hairpin and ssDNA connector sequences via the strand displacement reaction. Only when the two nicks are simultaneously ligated can the rolling circle amplification be triggered with high fidelity for yielding substantially enhanced fluorescence. By encoding the hairpin sequence, two distinct fluorescence signals can be generated for simultaneous detection of the wild and mutant p53 proteins. Importantly, our method significantly reduces the possibility of nonspecific ligation reactions by using two ligation nicks, which minimizes the background noise. With this dPLA method, the regulation transition of intracellular mutant p53 to wild p53 proteins upon anticancer drug treatment has also been demonstrated, highlighting its usefulness for potential early disease diagnosis and drug screening with high fidelity.

Simultaneous identification of Fritillariae cirrhosae bulbus and its common adulterants in one reaction by multiplex ligation-dependent probe amplification and high-resolution melting curve assay.

Fritillariae cirrhosae bulbus, a well-known and precious medicinal and edible herb in China, causes remarkable effects on swelling and relieving cough, with fewer side effects than other congeneric medicine. It has been subject to various cheaper congeneric adulteration because of its high price and limited production. In this paper, a rapid, high throughput, sensitive and efficient technique was described for simultaneous identification of F. cirrhosae bulbus and its common adulterants by employing multiplex ligation-dependent probe amplification coupled with high-resolution melting (MLPA-HRM) curve assay in their internal transcribed spacer 1 (ITS1) regions. This assay was highly sensitive with a detection limit of 0.19 ng genomic DNA, and highly specific with no cross-reaction with common adulterants. Mixed sample analysis showed as low as 10% adulteration can be detected from F. cirrhosae bulbus in one MLPA-HRM reaction. Overall, the method described in this paper is well suited for detecting adulteration in F. cirrhosae bulbus.

MnO2 nanosheet-mediated target-binding-induced FRET strategy for multiplexed microRNAs detection and imaging in living cells.

In the regulatory network, miRNAs play a regulatory role in a cooperative or antagonistic manner. Simultaneous accurate detection and imaging of multiplexed miRNAs in living cells are of great significance for miRNA-associated biological research and disease diagnosis and treatment. Herein, a MnO2 nanosheet-mediated target-binding-induced fluorescence resonance energy transfer (FRET) strategy was developed for detection and imaging of multiplexed miRNAs in living cells. Two pairs of DNA probes (P1-AF 488/P1'-Cy3 and P2-AF 488/P2'-AF 594) contained the complementary sequence to target miRNAs (miRNA-373 and miRNA-96) and labelled with different fluorescence dyes were designed. They were adsorbed onto MnO2 nanosheets by physisorption to form DNA/MnO2 nanocomposite probes. When the DNA/MnO2 nanocomposite probes were taken up by cells, the MnO2 nanosheets were reduced by intracellular glutathione, accompanying the release of DNA probe pairs. Then the DNA probe pairs specifically recognized and combined with miRNA-373 and miRNA-96 to form stable duplexes, respectively, bringing labelled fluorophores into close proximity to occur FRET. Based on this, the simultaneous imaging of miRNA-373 and miRNA-96 in MDA-MB-231 and L02 cells was successfully implemented. The results displayed a higher expression level of target miRNAs in MDA-MB-231 cells compared to L02 cells. The changes in expression levels of miRNA-96 induced by anti-miRNA-96 or mimics in MDA-MB-231 cells could also be monitored. In addition, the ratiometric detections of multiplexed miRNAs were achieved by utilizing the DNA probe pairs. The proposed strategy provides an alternative method for simultaneous accurate detection and imaging of multiplexed miRNAs and has potential application in biomedical applications.

Cytomolecular analysis of mutants, breeding lines, and varieties of camelina (Camelina sativa L. Crantz).

Camelina sativa L. Crantz (Brassicaceae family), known as camelina, has gained new attention as a re-emerging oil seed crop. With a unique seed oil profile, with the majority of the fatty acids consisting of linolenic (C18:3), oleic (C18:1), linoleic (C18:2), and eicosenoic (C20:1), camelina oil is reported to be useful as a food oil and biofuel. However, there are still many unknown factors about the structure and genetic variability of this crop. Chromosomal localization of ribosomal DNA was performed using fluorescence in situ hybridization (FISH) with 5S rDNA and 25S rDNA sequences as molecular probes on mitotic chromosomes of enzymatically digested root-tip meristematic cells. Here, we present for the first time a comparative analysis of selected genotypes (cultivars, breeding lines and mutants) of C. sativa with the use of cytogenetic techniques. The main aim of the study was to determine the intraspecific and interspecific polymorphisms in the structure of chromosomes of selected accessions using conserved 5S and 25S rDNA repetitive sequences as molecular probes. The results were compared with C. microcarpa (closely related to C. sativa) rDNA gene loci distribution. The presence of minor rDNA sites was discussed and compared with other Brassicaceae species. In addition, demonstration karyograms of C. sativa and C. microcarpa mapped with rDNA probes were prepared based on the cv. "Przybrodzka" and GE2011-02 genotype, respectively. The use of 5S and 25S rDNA probes provided an insight on the genome structure of C. sativa at the cytogenetic level and can help to understand the genome organization of this crop. The putative role of cytogenetic markers in phylogenetic analyses of camelina was discussed, as well.

Insights into the effects of acetate on the community structure of Candidatus Accumulibacter in biological phosphorus removal system using DNA stable-isotope probing (DNA-SIP).

Sodium acetate has been most commonly used as the external carbon source to achieve successful performance of full-scale enhanced biological phosphorus removal (EBPR) processes, but its microbial mechanism for the improvement of phosphorus removal performance was still unclear. DNA based stable-isotope probing (DNA-SIP) is able to discriminate the metabolic activity of different microbes for specific substrates, thus it was applied to explore the different effects of sodium acetate on the community structure of Candidatus Accumulibacter (hereafter called Accumulibacter) and Candidatus Competibacter (hereafter called Competibacter) in a modified University of Cape Town (MUCT) process treating the real domestic sewage. Results showed that acetate addition significantly improved the abundance of Accumulibacter and Competibacter in MUCT. Accumulibacter clade IID exhibited the highest proportion in all clades before and after acetate supplementation but the proportion decreased from 95.4 % on day 23-66.3% on day 95. Contrarily, the proportion of clade IIF increased from 0.9% to 24%. DNA-SIP incubation found that the ratio of Accumulibacter in the heavy fractions to the total quantities increased faster than that of Competibacter, which successfully revealed the acetate assimilating precedence of Accumulibacter over Competibacter. Besides, the ratios of Accumulibacter clade IIF in heavy fraction increased by 22.3 %, exhibited a higher metabolic activity than other clades. Adequate acetate accomplied with high temperature possibly promoted the preferential proliferation of clade ⅡF, which provided a way to enrich clade IIF. This is the first study that successfully applied DNA-SIP to discriminate the acetate metabolic activity of Accumulibacter and Competibacter, and Accumulibacter clades.

An electrochemical DNA biosensor fabricated from graphene decorated with graphitic nanospheres.

Graphene decorated with graphitic nanospheres functionalized with pyrene butyric acid (PBA) is used for the first time to fabricate a DNA biosensor. The electrode was formed by attaching a DNA probe onto PBA, which had been stacked onto a graphene material decorated with graphene nanospheres (GNSs). The nanomaterial was drop-coated onto a carbon screen-printed electrode (SPE) to create the GNS-PBA modified electrode (GNS-PBA/SPE). A simple method was used to produce GNS by annealing graphene oxide (GO) solution at high temperature. Field emission scanning electron micrographs confirmed the presence of a spherical shape of GNS with a diameter range of 40-80 nm. A stable and uniform PBA-modified GNS (GNS-PBA) was obtained with a facile ultrasonication step. Thus allowing aminated DNA probes of genetically modified (GM) soybean to be attached to the nanomaterials to form the DNA biosensor. The GNS-PBA/SPE exhibited excellent electrical conductivity via cyclic voltammetry (CV) and differential pulse voltammetry (DPV) tests using potassium ferricyanide (K3[Fe(CN)6]) as the electroactive probe. By employing an anthraquinone monosulfonic acid (AQMS) redox intercalator as the DNA hybridization indicator, the biosensor response was evaluated using the DPV electrochemical method. A good linear relationship between AQMS oxidation peak current and target DNA concentrations from 1.0 × 10-16 to 1.0 × 10-8 M with a limit of detection (LOD) of less than 1.0 × 10-16 M was obtained. Selectivity experiments revealed that the voltammetric GM DNA biosensor could discriminate complementary sequences of GM soybean from non-complementary sequences and hence good recoveries were obtained for real GM soybean sample analysis. The main advantage of using GNS is an improvement of the DNA biosensor analytical performance.

Nanostructuring Synergetic Base-Stacking Effect: An Enhanced Versatile Sandwich Sensor Enables Ultrasensitive Detection of MicroRNAs in Blood.

MicroRNA (MiRNA)-based noninvasive diagnostics are hampered by the challenge in the quantification of circulating miRNAs using a general strategy. Here, we present a base-stacking effect-mediated ultrasensitive electrochemical miRNA sensor (BSee-miR) with a universal sandwich configuration. In the BSee-miR, a short DNA probe (10 nucleotides) self-assembled on a gold electrode surface could effectively capture the target miRNA synergizing with another sequence based on coaxial sandwich base-stacking, which rivals the fully complementary strength. Importantly, such a sandwich structure is flexible to incorporate signal amplification strategies (e.g., biotin-avidin) that are usually difficult to achieve in short sequence detection. Using this design, the BSee-miR achieves a broad dynamic range with a detection limit down to 7.5 fM. Furthermore, we found a high-curvature nanostructuring synergetic base-stacking effect that could improve the sensitivity of the BSee-miR by two orders of magnitude (79.3 aM). Our BSee-miR also has a single-base resolution to discriminate the highly homologous miRNAs. More importantly, this approach is universal and has been used to probe target miRNAs varying in sequences and secondary structures. Our ultrasensitive sensor could detect miRNA in cell lysates and human blood and distinguish cancer patients from normal individuals, promising a versatile tool to measure clinically relevant miRNAs for tumor diagnostics.

Calcium-cation-doped polydopamine-modified 2D black phosphorus nanosheets as a robust platform for sensitive and specific biomolecule sensing.

Many polymer decorated/modified 2D nanomaterials have been developed as enhanced drug delivery systems and photothermal theranostic nanoagents. However, few reports describe the use of these novel nanomaterials as nanoplatforms for biomolecule sensing. Herein, we used calcium-cation-doped polydopamine-modified (PDA-modified) 2D black phosphorus (BP) nanosheets (BP@PDA) as a sensing nanoplatform for the detection of nucleic acids and proteins in complex biological samples. Fluorescent-dye-labeled single-strand DNA aptamer/probes are adsorbed by the Ca2+-doped BP@PDA mediated by calcium-cation coordination. The PDA coating enhances the stability of the inner BP, provides binding sites to DNA nucleobases, and quenches fluorescence. Without any chemical conjugation, this sensing nanoplatform selectively and specifically detects protein (human thrombin, linear range: 10-25 nM, detection limit: 0.02 nM), single-strand DNA (linear range: 1-10 nM, detection limit: 0.52 nM) in 1% serum diluted samples, and senses intracellular mRNAs (C-myc, and actin) in living cells. The nanoplatform exhibits the advantages of both the 2D nanomaterial (BP) and the coating polymer (PDA), naturally enters living cells unaided by transfection agents, resists enzymatic lysis and shows high biocompatibility. This nanoplatform design contributes towards future biomolecule analytical method development based on polymer decorated/modified 2D nanomaterials.

DNA-templated copper nanoparticles as signalling probe for electrochemical determination of microRNA-222.

An ultrasensitive electrochemical biosensor is described for the determination of microRNAs. It is based on the use of DNA-templated copper nanoparticles (Cu NPs) as signalling probe. MicroRNA-222 was selected as the model analyte. The probe was obtained from two different oligonucleotides (containing complementary bases) via hybridization chain reaction to form long DNA concatemers as template. The Cu NPs were formed by reaction of ascorbate with copper sulfate. The biosensor was fabricated as follows: (a) Capture probe (cDNA) with a thiolated group was immobilized on reduced graphene oxide modified with gold nanoparticles (rGO/Au NPs), (b) materials was placed on a glassy carbon electrode (GCE); (c) the modified electrode (cDNA/rGO/Au NPs/GCE) was sequentially hybridized with microRNA-222 and signal probe; this results in the formation of a sandwich structure of cDNA-microRNA-signal probe on surface of the modified electrode. Differential pulse voltammetry was employed to record the electrochemical response of biosensor in pH 6.0 solution. As a result, a sensitive oxidation current with a peak potential at 0.10 V (vs. SCE) was obtained corresponding to Cu NPs. The experimental conditions were optimized. Under optimal conditions, the biosensor exhibited wide linear response range (0.5 fM to 70 nM) and low limit of detection (0.03 fM; at S/N = 3). The assay possesses high selectivity and can discriminate analyte microRNA from single-base mismatched microRNA. Graphical abstractA sensitive electrochemical biosensor is described for the determination of microRNA-222 by using a dsDNA-templated Cu NPs as signalling probe. (A) represents the preparation of signal probe, and (B) represents the fabrication of electrochemical microRNA sensor.

A Multicolor Fluorescence Nanoprobe Platform Using Two-Dimensional Metal Organic Framework Nanosheets and Double Stirring Bar Assisted Target Replacement for Multiple Bioanalytical Applications.

Multicolor fluorescence probes can show fluorescence of different colors when detecting different targets, and the excellent feature can create a highly differentiated multicolor sensing platform. However, most of the previously reported multicolor luminescent materials usually suffer from high toxicity and photobleaching, complex preparation procedures, and poor water solubility, which may not be conducive to bioanalytical applications. Two-dimensional metal organic frameworks (2D MOFs), which have large specific surface areas with long-range fluorescence quenching coupled with biomolecular recognition events, have encouraged innovation in biomolecular probing. Here, we propose a 2D-MOF-based multicolor fluorescent aptamer nanoprobe using a double stirring bar assisted target replacement system for enzyme-free signal amplification. It utilizes the interaction between 2D MOFs and DNA molecules to detect multiple antibiotics quickly, sensitively, and selectively. Since 2D MOFs have excellent quenching efficiency for luminescence of fluorescent-dye-labeled single-strand DNA (ssDNA), the background fluorescence can be largely reduced and the signal-to-noise ratio can be improved. When the adsorbed ssDNA formed double helix double-stranded DNA with its complementary ssDNA, its fluorescence can be almost fully recovered. The assay was tested by detecting chloramphenicol (CAP), oxytocin (OTC), and kanamycin (KANA) in biological samples. The developed aptasensor was sufficiently sensitive to detect the antibiotic residues as low as 1.5 pM CAP, 2.4 pM OTC, and 1 pM KANA (S/N = 3). It has been preliminarily used for multicolor imaging of three different antibiotics in fish tissue slices with satisfactory results.