Epsilon-poly-l-lysine microneedle patch loaded with amorphous doxycycline nanoparticles for synergistic treatment of skin infection.

The development of antibiotic-loaded microneedles has been hindered for years by limited excipient options, restricted drug-loading space, poor microneedle formability, and short-term drug retention. Therefore, this study proposes a dissolving microneedle fabricated from the host-defense peptide ε-poly-l-lysine (EPL) as an antibacterial adjuvant system for delivering antibiotics. EPL serves not only as a major matrix material for the microneedle tips, but also as a broad-spectrum antibacterial agent that facilitates the intracellular accumulation of the antibiotic doxycycline (DOX) by increasing bacterial cell membrane permeability. Furthermore, the formation of physically crosslinked networks of EPL affords microneedle tips with improved formability, good mechanical properties, and amorphous nanoparticles (approximately 7.2 nm) of encapsulated DOX. As a result, a high total loading content of both antimicrobials up to 2319.1 µg/patch is achieved for efficient transdermal drug delivery. In a Pseudomonas aeruginosa-induced deep cutaneous infection model, the EPL microneedles demonstrates potent and long-term effects by synergistically enhancing antibiotic activities and prolonging drug retention in infected lesions, resulting in remarkable therapeutic efficacy with 99.91 % (3.04 log) reduction in skin bacterial burden after a single administration. Overall, our study highlights the distinct advantages of EPL microneedles and their potential in clinical antibacterial practice when loaded with amorphous DOX nanoparticles.

Biological Profile of Two Gentiana lutea L. Metabolites Using Computational Approaches and In Vitro Tests.

Natural products have been the main source of bioactive molecules for centuries. We tested the biological profile of two metabolites extracted from Gentiana lutea L. by means of computational techniques and in vitro assays. The two molecules (loganic acid and gentiopicroside) were tested in silico using an innovative technique, named Inverse Virtual Screening (IVS), to highlight putative partners among a panel of proteins involved in inflammation and cancer events. A positive binding with cyclooxygenase-2 (COX-2), alpha-1-antichymotrypsin, and alpha-1-acid glycoprotein emerged from the computational experiments and the outcomes from the promising interaction with COX-2 were confirmed by Western blot, highlighting the reliability of IVS in the field of the natural products.

Biomaterial-Based Nanocomposite for Osteogenic Repurposing of Doxycycline.

BACKGROUND: Besides its antimicrobial action, doxycycline (DX) has lately been repurposed as a small-molecule drug for osteogenic purposes. However, osteogenic DX application is impeded by its dose-dependent cytotoxicity. Further, high-dose DX impairs cell differentiation and mineralization. PURPOSE: Integrating DX into a biomaterial-based delivery system that can control its release would not only ameliorate its cytotoxic actions but also augment its osteogenic activity. In this work, we managed to engineer novel composite DX-hydroxyapatite-polycaprolactone nanoparticles (DX/HAp/PCL) to modify DX osteogenic potential. METHODS: Employing a 23-factorial design, we first optimized HApN for surface-area attributes to maximize DX loading. Composite DX/HAp/PCL were then realized using a simple emulsification technique, characterized using various in vitro methods, and evaluated for in vitro osteogenesis. RESULTS: The developed HApN exhibited a favorable crystalline structure, Ca:P elemental ratio (1.67), mesoporous nature, and large surface area. DX/HAp/PCL achieved the highest reported entrapment efficiency (94.77%±1.23%) of DX in PCL-based particles. The developed composite system achieved controlled release of the water-soluble DX over 24 days. Moreover, the novel composite nanosystem managed to significantly ameliorate DX cytotoxicity on bone-marrow stem cells, as well as enhance its overall proliferation potential. Alkaline phosphatase and mineralization assays revealed superior osteodifferentiation potential of the composite system. Quantification of gene expression demonstrated that while DX solution was able to drive bone-marrow stem cells down the osteogenic lineage into immature osteoblasts after 10-day culture, the innovative composite system allowed maturation of osteodifferentiated cells. To the best of our knowledge, this is the first work to elaborate the impact of DX on the expression of osteogenic genes: RUNX2, OSP, and BSP. Further, the osteogenicity of a DX-loaded particulate-delivery system has not been previously investigated. CONCLUSION: Our findings indicate that repurposing low-dose DX in complementary biomaterial-based nanosystems can offer a prominent osteogenic candidate for bone-regeneration purposes.

In silico Potential of Approved Antimalarial Drugs for Repurposing Against COVID-19.

Although the coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is wreaking havoc and resulting in mortality and morbidity across the planet, novel treatments are urgently needed. Drug repurposing offers an innovative approach in this context. We report here new findings on the in silico potential of several antimalarial drugs for repurposing against COVID-19. We conducted analyses by docking the compounds against two SARS-CoV-2-specific targets: (1) the receptor binding domain spike protein and (2) the main protease of the virus (MPro) using the Schrödinger software. Importantly, the docking analysis revealed that doxycycline (DOX) showed the most effective binding to the spike protein of SARS-CoV-2, whereas halofantrine and mefloquine bound effectively with the main protease among the antimalarial drugs evaluated in the present study. The in silico approach reported here suggested that DOX could potentially be a good candidate for repurposing for COVID-19. In contrast, to decipher the actual potential of DOX and halofantrine against COVID-19, further in vitro and in vivo studies are called for. Drug repurposing warrants consideration as a viable research and innovation avenue as planetary health efforts to fight the COVID-19 continue.

A controllable local drug delivery system based on porous fibers for synergistic treatment of melanoma and promoting wound healing.

A dual function system that inhibits tumor growth while promoting wound healing is very necessary for melanoma treatment since tumor killing and skin healing are two complementary and influential processes. Herein, a controllable local drug delivery system based on porous fiber membranes incorporated with CuS nanoparticles is designed for chemo-photothermal synergistic melanoma therapy and promoting wound healing. The porous structure on the fiber surface significantly increases the drug loading capacity of the membrane and the photothermal effect of incorporated CuS nanoparticles is used to control the drug release rate. Benefitting from the chemo-photothermal synergistic therapy, the composite membrane can effectively kill melanoma cells in vitro and inhibit tumor growth in vivo. Furthermore, the membrane can also significantly promote the cutaneous wound healing by providing mechanical support and releasing copper ions. Thus, this work provides new ideas for the development of multifunctional local treatment and postoperative care systems.

Formulation and Evaluation of Novel Thiolated Intra Pocket Periodontal Composite Membrane of Doxycycline.

Localized intra-pocket, retentive, biodegradable, prolonged release thiolated membrane can provide an improved therapeutic efficacy of doxycycline at the site of action with evading off target side effects. To this end, thiolated chitosan-hyaluronic acid composite polymeric complex next-generation of the periodontal membrane was manufactured by solvent casting method. FTIR spectroscopic analysis displayed successful immobilization of thiol groups on the manufactured thiolated periodontal membrane. Moreover, XRD, DSC, AFM and TGA of the membrane confirmed the compatibility of ingredients and modifications in surface chemistry. The thiolated periodontal film was also investigated in terms of thickness, weight uniformity, water-uptake capacity, drug content, pH, entrapment efficiency, lysozymal degradation and release patterns. Also, mucoadhesion profile was explored on gingival mucosa. The immobilized thiol groups on thiolated chitosan and thiolated hyaluronate were found to be 168 ± 11 µM/g (mean ± SD, n = 3) and 189 ± 8 µM/g (mean ± SD, n = 3) respectively. Swelling capacity of the thiolated periodontal membrane was significantly ∼2-fold higher (p < 0.05) as compared to unmodified membrane. The obtained thiolated membrane depicted 3 -old higher mucoadhesive features as compared to the un-modified membrane. In vitro release kinetics indicated approximately more than 80% prolonged release within 7 days. Mechanical strength of the Thiolated bandage was also significantly ∼2-fold higher (p < 0.05) as compared to unmodified membrane. Ex-vivo retention study revealed enhanced retention of thiolated membrane as compared to unmodified membrane. In-vitro antimicrobial studies demonstrated that thiolated membrane could efficiently kill Porphyromonas gingivalis cells as compared to the native membrane. Moreover, ex-vivo biodegradation results indicated that 90% of the thiolated membrane was biodegradable in 28 days. Based on these findings, thiolated next-generation of the periodontal membrane seems to be promising for periodontitis therapy.

Hollow mesoporous carbon nanospheres for imaging-guided light-activated synergistic thermo-chemotherapy.

Carbon-based light-activated materials can absorb optical energy to generate photoacoustic (PA) signals for imaging or transduce optical photons to thermal energy, which holds great promise for biomedical applications. Herein, we synthesize hollow and mesoporous carbon nanospheres (HMCNs) with uniform size on a large scale. The properties of hollow cavity and mesoporous structures make the HMCNs achieve high drug loading (480 mg DOX per g HMCNs). The present intense near infrared (NIR) absorbance achieves excellent photoacoustic imaging ability and photothermal conversion efficacy (32.0%). More interestingly, the encapsulated drugs can have a triggered release under NIR irradiation. The investigations in vitro and in vivo demonstrate that HMCNs have excellent biocompatibility, and accumulate in tumors by the enhanced permeability and retention (EPR) effect. Moreover, under NIR irradiation, in vivo evaluation shows that HMCNs can perform strong PA imaging, and induce great tumor inhibition by the combination of chemotherapy and PTT under the guidance of photoacoustic imaging. The present study provides new insight for design of novel biocompatible light-activated carbons for cancer nanotheranostics.

Improved reactive nanoparticles to treat dentin hypersensitivity.

The aim of this study was to evaluate the effectiveness of different nanoparticles-based solutions for dentin permeability reduction and to determine the viscoelastic performance of cervical dentin after their application. Four experimental nanoparticle solutions based on zinc, calcium or doxycycline-loaded polymeric nanoparticles (NPs) were applied on citric acid etched dentin, to facilitate the occlusion and the reduction of the fluid flow at the dentinal tubules. After 24 h and 7 d of storage, cervical dentin was evaluated for fluid filtration. Field emission scanning electron microscopy, energy dispersive analysis, AFM and Nano-DMA analysis were also performed. Complex, storage, loss modulus and tan delta (δ) were assessed. Doxycycline-loaded NPs impaired tubule occlusion and fluid flow reduction trough dentin. Tubules were 100% occluded in dentin treated with calcium-loaded NPs or zinc-loaded NPs, analyzed at 7 d. Dentin treated with both zinc-NPs and calcium-NPs attained the highest reduction of dentinal fluid flow. Moreover, when treating dentin with zinc-NPs, complex modulus values attained at intertubular and peritubular dentin were higher than those obtained after applying calcium-NPs. Zinc-NPs are then supposed to fasten active dentin remodeling, with increased maturity and high mechanical properties. Zinc-based nanoparticles are then proposed for effective dentin remineralization and tubular occlusion. Further research to finally prove for clinical benefits in patients with dentin hypersensitivity using Zn-doped nanoparticles is encouraged. STATEMENT OF SIGNIFICANCE: Erosion from acids provokes dentin hypersensitivity (DH) which presents with intense pain of short duration. Open dentinal tubules and demineralization favor DH. Nanogels based on Ca-nanoparticles and Zn-nanoparticles produced an efficient reduction of fluid flow. Dentinal tubules were filled by precipitation of induced calcium-phosphate deposits. When treating dentin with Zn-nanoparticles, complex modulus values attained at intertubular and peritubular dentin were higher than those obtained after applying Ca-nanoparticles. Zn-nanoparticles are then supposed to fasten active dentin remodeling, with increased maturity and high mechanical properties. Zinc-based nanogels are, therefore, proposed for effective dentin remineralization and tubular occlusion. Further research to finally prove for clinical benefits in patients with dentin hypersensitivity using Zn-doped nanogels is encouraged.

A novel flow injection spectrophotometric method using plant extracts as green reagent for the determination of doxycycline.

A novel flow injection spectrophotometric method was developed for the determination of doxycycline in pharmaceutical preparations using iron(III) contained in extracts from plants. The assay was based on the complex formed between doxycycline and iron(III) characterized by an absorption maximum at 435nm. The calibration graphs obtained over the doxycycline concentration range 5-250µgmL-1 gave correlation coefficients of 0.9979, 0.9987 and 0.9987 with the three green reagents prepared from Senna alata (L.) Roxb. (S. alata), Polygonum hydropiper L. (P. hydropiper) or Diplazium esculentum (Retz.) Sw. (D. esculentum), respectively. The relative standard deviations of the repeatability was <2.00%. The percentage recoveries were in the range of 98.27-101.03%. Doxycycline contents obtained by this new method and by the reference methods reported in literature were in agreement at 95% confidence level with the paired t-test. The sample throughput was 36h-1 for each green reagent.

Nanoparticulate delivery of agents for induced elastogenesis in three-dimensional collagenous matrices.

The degradation of elastic matrix in the infrarenal aortic wall is a critical parameter underlying the formation and progression of abdominal aortic aneurysms. It is mediated by the chronic overexpression of matrix metalloprotease (MMP)-2 and MMP-9, leading to a progressive loss of elasticity and weakening of the aortic wall. Delivery of therapeutic agents to inhibit MMPs, while concurrently coaxing cell-based regenerative repair of the elastic matrix represents a potential strategy for slowing or arresting abdominal aortic aneurysm growth. Previous studies have demonstrated elastogenic induction of healthy and aneurysmal aortic smooth muscle cells and inhibition of MMPs, following exogenous delivery of elastogenic factors such as transforming growth factor (TGF)-ß1, as well as MMP-inhibitors such as doxycycline (DOX) in two-dimensional culture. Based on these findings, and others that demonstrated elastogenic benefits of nanoparticulate delivery of these agents in two-dimensional culture, poly(lactide-co-glycolide) nanoparticles were developed for localized, controlled and sustained delivery of DOX and TGF-ß1 to human aortic smooth muscle cells within a three-dimensional gels of type I collagen, which closely simulate the arterial tissue microenvironment. DOX and TGF-ß1 released from these nanoparticles influenced elastogenic outcomes positively within the collagen constructs over 21 days of culture, which were comparable to that induced by exogenous supplementation of DOX and TGF-ß1 within the culture medium. However, this was accomplished at doses ~20-fold lower than the exogenous dosages of the agents, illustrating that their localized, controlled and sustained delivery from nanoparticles embedded within a three-dimensional scaffold is an efficient strategy for directed elastogenesis. Copyright © 2014 John Wiley & Sons, Ltd.

Cu7 S4 Nanosuperlattices with Greatly Enhanced Photothermal Efficiency.

According to the simulation, the self-assembly of Cu7 S4 nanocrystals would enhance the photothermal conversion efficiency (PCE) because of the localized surface plasmon resonance effects, which is highly desirable for photothermal therapy (PTT). A new strategy to synthesize Cu7 S4 nanosuperlattices with greatly enhanced PCE up to 65.7% under irradiation of 808 nm near infrared light is reported here. By tuning the surface properties of Cu7 S4 nanocrystals during the synthesis via thermolysis of a new single precursor, dispersed nanoparticles (NPs), rod-like alignments, and nanosuperlattices are obtained, respectively. To explore their PTT applications, these hydrophobic nanostructures are transferred into water by coating with home-made amphiphilic polymer while maintaining their original structures. Under identical conditions, the PCE are 48.62% and 56.32% for dispersed NPs and rod-like alignments, respectively. As expected, when the nanoparticles are self-assembled into nanosuperlattices, the PCE is greatly enhanced up to 65.7%. This strong PCE, along with their excellent photothermal stability and good biocompatibility, renders these nanosuperlattices good candidates as PTT agents. In vitro photothermal ablation performances have undoubtedly proved the excellent PCE of our Cu7 S4 nanosuperlattices. This research offers a versatile and effective solution to get PTT agents with high photothermal efficiency.

In-situ forming composite implants for periodontitis treatment: How the formulation determines system performance.

Periodontitis is the primary cause of tooth loss in adults and a very wide-spread disease. Recently, composite implants, based on a drug release rate controlling polymer and an adhesive polymer, have been proposed for an efficient local drug treatment. However, the processes involved in implant formation and the control of drug release in these composite systems are complex and the relationships between the systems' composition and the implants' performance are yet unclear. In this study, advanced characterization techniques (e.g., electron paramagnetic resonance, EPR) were applied to better understand the in-situ forming implants based on: (i) different types of poly(lactic-co-glycolic acid) (PLGA) as drug release rate controlling polymers; (ii) hydroxypropyl methylcellulose (HPMC) as adhesive polymer; and (iii) doxycycline or metronidazole as drugs. Interestingly, HPMC addition to shorter chain PLGA slightly slows down drug release, whereas in the case of longer chain PLGA the release rate substantially increases. This opposite impact on drug release was rather surprising, since the only difference in the formulations was the polymer molecular weight of the PLGA. Based on the physico-chemical analyses, the underlying mechanisms could be explained as follows: since longer chain PLGA is more hydrophobic than shorter chain PLGA, the addition of HPMC leads to a much more pronounced facilitation of water penetration into the system (as evidenced by EPR). This and the higher polymer lipophilicity result in more rapid PLGA precipitation and a more porous inner implant structure. Consequently, drug release is accelerated. In contrast, water penetration into formulations based on shorter chain PLGA is rather similar in the presence and absence of HPMC and the resulting implants are much less porous than those based on longer chain PLGA.

In vitro and in vivo evaluation of doxycycline-chondroitin sulfate/PCLmicrospheres for intraarticular treatment of osteoarthritis.

Osteoarthritis (OA) is a degenerative joint disease, which has no complete treatment with medication yet. Intraarticular hyaluronan (HA) injection can decrease pain and modify the natural course of OA. This study was designed to provide long term delivery of an MMP (matrix-metalloproteinase) inhibitor agent-doxycycline, together with matrix regenerative agent-chondroitin sulfate for treating OA which progress with matrix degenerations. Doxycycline (D) and doxycycline-chondroitin sulfate (D-CS) loaded poly-ɛ-caprolactone (PCL) microspheres (MS) were prepared as intraarticular delivery systems. Bio-effectiveness of developed microspheres was first evaluated with three-dimensional in vitro model of OA where both MS showed significant reduction in MMP-13 levels compared to untreated OA-chondrocytes at 15 and 24 days. Significant decrease was observed in GAG release into the media for both D MS and D-CS MS treated groups at 15 and 24 days. Second, the microspheres were injected to rabbit knee in hyaluronan (HA) to evaluate the effectiveness of the treatment. Radiographic scores of D MS and D-CS MS groups improved after 8 weeks when compared to OA group. Mankin-Pitzker histological scores similarly showed improvement with D MS and D-CSMS groups when compared to OA group. Ex vivo hardness tests of cartilages demonstrated superior hardness values with both doses of D-CSMS compared to OA group. D MS showed promising improvement of OA in histology results. Although, both MS groups had similar effects on cells in the in vitro model, D-CSMS had a positive contribution on all in vivo treatment outcomes and showed potential as a new strategy for treatment when applied to OA knee joints.

Interferon-stimulated gene 15 (ISG15) and ISG15-linked proteins can associate with members of the selective autophagic process, histone deacetylase 6 (HDAC6) and SQSTM1/p62.

The ubiquitin-like interferon (IFN)-stimulated gene 15 (ISG15) and its specific E1, E2, and E3 enzymes are transcriptionally induced by type I IFNs. ISG15 conjugates newly synthesized proteins. ISG15 linkage to proteins appears to be an important downstream IFN signaling event that discriminates cellular and pathogenic proteins synthesized during IFN stimulation from existing proteins. This eliminates potentially pathogenic proteins as the cell attempts to return to normal homeostasis after IFN "stressed" conditions. However, the molecular events that occur in this process are not well known. Here, we show that the C-terminal LRLRGG of ISG15 interacts with the binder of ubiquitin zinc finger (BUZ) domain of histone deacetylase 6 (HDAC6). Because HDAC6 is involved in the autophagic clearance of ubiquitinated aggregates during which SQSTM1/p62 plays a major role as a cargo adapter, we also were able to confirm that p62 binds to ISG15 protein and its conjugated proteins upon forced expression. Both HDAC6 and p62 co-localized with ISG15 in an insoluble fraction of the cytosol, and this co-localization was magnified by the proteasome inhibitor MG132. In addition, ISG15 was degraded via the lysosome. Overexpression of ISG15, which leads to an increased conjugation level of the cellular proteome, enhanced autophagic degradation independently of IFN signaling transduction. These results thus indicate that ISG15 conjugation marks proteins for interaction with HDAC6 and p62 upon forced stressful conditions likely as a step toward autophagic clearance.

A cellular system for quantitation of vitamin K cycle activity: structure-activity effects on vitamin K antagonism by warfarin metabolites.

Warfarin and other 4-hydroxycoumarins inhibit vitamin K epoxide reductase (VKOR) by depleting reduced vitamin K that is required for posttranslational modification of vitamin K-dependent clotting factors. In vitro prediction of the in vivo potency of vitamin K antagonists is complicated by the complex multicomponent nature of the vitamin K cycle. Here we describe a sensitive assay that enables quantitative analysis of γ-glutamyl carboxylation and its antagonism in live cells. We engineered a human embryonic kidney (HEK) 293-derived cell line (HEK 293-C3) to express a chimeric protein (F9CH) comprising the Gla domain of factor IX fused to the transmembrane and cytoplasmic regions of proline-rich Gla protein 2. Maximal γ-glutamyl carboxylation of F9CH required vitamin K supplementation, and was dose-dependently inhibited by racemic warfarin at a physiologically relevant concentration. Cellular γ-glutamyl carboxylation also exhibited differential VKOR inhibition by warfarin enantiomers (S > R) consistent with their in vivo potencies. We further analyzed the structure-activity relationship for inhibition of γ-glutamyl carboxylation by warfarin metabolites, observing tolerance to phenolic substitution at the C-5 and especially C-6, but not C-7 or C-8, positions on the 4-hydroxycoumarin nucleus. After correction for in vivo concentration and protein binding, 10-hydroxywarfarin and warfarin alcohols were predicted to be the most potent inhibitory metabolites in vivo.

Population pharmacokinetics of doxycycline in the tears and plasma of northern elephant seals (Mirounga angustirostris) following oral drug administration.

OBJECTIVE: To assess tear and plasma concentrations of doxycycline following oral administration to northern elephant seals (Mirounga angustirostris). DESIGN: Pharmacokinetic study. ANIMALS: 18 juvenile northern elephant seals without signs of ocular disease. PROCEDURES: Study seals were receiving no medications other than a multivitamin and were free from signs of ocular disease as assessed by an ophthalmic examination. Doxycycline (10 or 20 mg/kg [4.5 or 9.1 mg/lb]) was administered orally every 24 hours for 4 days. Tear and plasma samples were collected at fixed time points, and doxycycline concentration was assessed by means of liquid chromatography-tandem mass spectrometry. Concentration-time data were calculated via noncompartmental analysis. RESULTS: Following administration of doxycycline (10 mg/kg/d, PO), maximum plasma doxycycline concentration was 2.2 µg/mL at 6.1 hours on day 1 and was 1.5 µg/mL at 4.0 hours on day 4. Administration of doxycycline (20 mg/kg/d, PO) produced a maximum plasma doxycycline concentration of 2.4 µg/mL at 2.3 hours on day 1 and 1.9 µg/mL at 5.8 hours on day 4. Doxycycline elimination half-life on day 4 in animals receiving doxycycline at a dosage of 10 or 20 mg/kg/d was 6.7 or 5.6 hours, respectively. Mean plasma-to-tear doxycycline concentration ratios over all days were not significantly different between the low-dose (9.85) and high-dose (9.83) groups. For both groups, doxycycline was detectable in tears for at least 6 days following cessation of dosing. CONCLUSIONS AND CLINICAL RELEVANCE: Oral administration of doxycycline at the doses tested in the present study resulted in concentrations in the plasma and tears of northern elephant seals likely to be clinically effective for treatment of selected cases of systemic infectious disease, bacterial ulcerative keratitis, and ocular surface inflammation. This route of administration should be considered for treatment of corneal disease in northern elephant seals and possibly other related pinniped species.

MTAD in endodontics: an update review.

The major objective in endodontic therapy is to achieve complete chemomechanical debridement of the entire root canal system. This can be accomplished with biomechanical instrumentation and chemical irrigation. Various endodontic irrigants, such as sodium hypochlorite, chlorhexidene, and iodine potassium iodide, are available, each having its own advantages with some limitations. MTAD, a new endodontic irrigant, has been introduced to fulfill these limitations. MTAD is a mixture of doxycycline, citric acid, and a detergent (Tween 80). Since its introduction, it is a material that has been researched extensively for its properties. This article presents a review on the numerous properties of MTAD, such as antimicrobial activity, smear layer- and pulp-dissolving capability, effect on dentin and adhesion, and biocompatibility.

Effect of tetracyclines on the dynamics of formation and destructuration of beta2-microglobulin amyloid fibrils.

The discovery of methods suitable for the conversion in vitro of native proteins into amyloid fibrils has shed light on the molecular basis of amyloidosis and has provided fundamental tools for drug discovery. We have studied the capacity of a small library of tetracycline analogues to modulate the formation or destructuration of ß2-microglobulin fibrils. The inhibition of fibrillogenesis of the wild type protein was first established in the presence of 20% trifluoroethanol and confirmed under a more physiologic environment including heparin and collagen. The latter conditions were also used to study the highly amyloidogenic variant, P32G. The NMR analysis showed that doxycycline inhibits ß2-microglobulin self-association and stabilizes the native-like species through fast exchange interactions involving specific regions of the protein. Cell viability assays demonstrated that the drug abolishes the natural cytotoxic activity of soluble ß2-microglobulin, further strengthening a possible in vivo therapeutic exploitation of this drug. Doxycycline can disassemble preformed fibrils, but the IC(50) is 5-fold higher than that necessary for the inhibition of fibrillogenesis. Fibril destructuration is a dynamic and time-dependent process characterized by the early formation of cytotoxic protein aggregates that, in a few hours, convert into non-toxic insoluble material. The efficacy of doxycycline as a drug against dialysis-related amyloidosis would benefit from the ability of the drug to accumulate just in the skeletal system where amyloid is formed. In these tissues, the doxycycline concentration reaches values several folds higher than those resulting in inhibition of amyloidogenesis and amyloid destructuration in vitro.

Click-chemistry-derived tetracycline-amino acid conjugates exhibiting exceptional potency and exclusive recognition of the reverse tet repressor.

A click-chemistry-based synthesis of biologically active doxycycline-amino acid conjugates is described. Starting from 9-aminodoxycycline derivatives and complementary functionalized amino acids, ligation was accomplished by copper(I)-catalyzed azide-alkyne [3+2] cycloaddition (CuAAC). The final products were tested in a variety of TetR and revTetR systems, and the C-terminally linked phenylalanine conjugate 12 c exhibited high selectivity for revTetR over TetR. Besides the unique property of the specific effector 12 c to effectively differentiate TetR and its reverse phenotype, the test compound proved to be almost devoid of any antibacterial activity; this will be highly beneficial for future applications to control gene expression in bacterial systems.

Formulation and evaluation of PLA and PLGA in situ implants containing secnidazole and/or doxycycline for treatment of periodontitis.

The purpose of this study is to formulate in situ implants containing doxycycline hydrochloride and/or secnidazole that could be used in the treatment of periodontitis by direct periodontal intrapocket administration. Biodegradable polymers [poly (lactide) (PLA) and poly (lactide-co-glycolide) (PLGA)], each polymer in two concentrations 25%w/w, 35%w/w were used to formulate the in situ implants. The rheological behavior, in vitro drug release and the antimicrobial activity of the prepared implants were evaluated. Increasing the concentration of each polymer increases the viscosity and decreases the percent of the drugs released after 24 h. PLA implants showed a slower drugs release rate than PLGA implants in which the implants composed of 25% PLGA showed the fastest drugs release. The in vitro drug release and antimicrobial activity results were compared with results of Atridox. Results revealed that the pharmaceutical formulation based on 25% PLGA containing secnidazole and doxycycline hydrochloride has promising activity in treating periodontitis in comparison with Atridox.