The gold protocol: A combined treatment approach for neck rejuvenation with calcium hydroxyapatite, botulinum toxin, and hyaluronic acid in the same session.

BACKGROUND: The signs of aging seem to be more visible on the neck compared to other locations, especially if a patient has already gone through facial rejuvenation procedures. Treatment of the aging neck imposes a challenge to the clinician, since one single approach is usually not enough to achieve the desired result, requiring multiple injections and sessions, which apart from being painful for the patients, is time-consuming for the clinician. AIM: To describe the use of calcium hydroxyapatite, incobotulinum toxin type A and Cohesive poly-densified matrix hyaluronic acid diluted in the same syringe and injected in the same session for neck rejuvenation. PATIENTS AND METHODS: Fifteen women, older than 18 years, with cervical skin flaccidity grade 1-4 in a previously validated 5-point rating scale (Dermatologic Surg, 2016; 42, S94), who sought neck rejuvenation were injected in this pilot study with a single session with a combined hybrid mixture of calcium hydroxyapatite, incobotulinum toxin type A, and Cohesive poly-densified matrix hyaluronic acid and followed up for 90-180 days. RESULTS: At the 4-month post injection evaluation, 93.3% of the patients presented at least 1-grade improvement in the 5-point scale as evaluated by the investigator. No serious adverse events were reported, being most mild and transient in nature. CONCLUSION: CaHA, incoBonTA, and CPM-HA have complementary mechanisms of action and may be injected from the same syringe in the same session, boosting the final outcome, with high patient satisfaction, and ease of process for both patients and clinicians.

Preparation of mesoporous silica/hydroxyapatite loaded quercetin nanoparticles and research on its antibacterial properties.

In this study, amino-functionalized mesoporous silica/hydroxyapatite nanoparticles (MSNS/HAP) with the property of acid dissociation have been prepared as a traditional Chinese medicine monomer carriers to improve the drug loading rate and antibacterial properties of antimicrobial quercetin (QUE) in vitro. The experimental results confirm that the drug loading rate of MSNs/HAP is 28.94 %, which is about 3.6 times higher than that of aminated mesoporous sililca nanoparticles (MSNs). The drug release of QUE on MSNs/HAP is pH-sensitive in phosphate buffered saline (pH=4.0-7.4). The above fabricated traditional Chinese medicine monomer modified nanocomposites (QUE@MSNs/HAP) displays concentration-dependent inhibitory effect, which shows better antibacterial effect than free QUE. The minimum inhibitory concentration for two tested bacteria, Staphylococcus aureus (S.aureus) and Escherichia coli (E.coli), is 256 mg·L -1. In summary, QUE@MSNs/HAP have successfully prepared, which not only improves the bio-availability of QUE, but also has acid-sensitive drug release properties. Compared with free QUE, its antibacterial performance significantly enhances, which provides a theoretical basis for the application of Chinese medicine molecules in bacterial treatment.

Development and application of hydroxyapatite-based scaffolds for bone tissue regeneration: A systematic literature review.

Hydroxyapatite [HA, Ca10(PO4)6(OH)2], with its robust biocompatibility and bioactivity, has found extensive utility in bone grafting, replacement therapies, and supplemental medical materials. HA is highly regarded for its osteoconductive properties because it boasts hydrophilicity, nontoxicity, non-allergenicity, and non-mutagenicity. Nevertheless, HA's intrinsic mechanical weakness has spurred efforts to enhance its properties. This enhancement is achieved through ion incorporation, with elements such as magnesium, zinc, lithium, strontium, boron, and others being integrated into the HA structure. In the domain of orthopedics, HA-based scaffolds have emerged as a solution for addressing prevalent issues like bone deformities and defects stemming from congenital anomalies, injuries, trauma, infections, or tumors. The fabrication of three-dimensional scaffolds (3D scaffolds) has enabled advancements in bone regeneration and replacement, with a focus on practical applications such as repairing calvarial, skull, and femoral defects. In vitro and in vivo assessments have substantiated the effectiveness of 3D scaffolds for bone defect repair, regeneration, and tissue engineering. Beyond bone-related applications, scaffolds demonstrate versatility in enhancing cartilage healing and serving as bioimplants. The wide array of scaffold applications underscores their ongoing potential for further development in the realm of medical science.

Enhancing osteoblast proliferation and bone regeneration by poly (amino acid)/selenium-doped hydroxyapatite.

Among various biomaterials employed for bone repair, composites with good biocompatibility and osteogenic ability had received increasing attention from biomedical applications. In this study, we doped selenium (Se) into hydroxyapatite (Se-HA) by the precipitation method, and prepared different amounts of Se-HA-loaded poly (amino acid)/Se-HA (PAA/Se-HA) composites (0, 10 wt%, 20 wt%, 30 wt%) byin-situmelting polycondensation. The physical and chemical properties of PAA/Se-HA composites were characterized by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and their mechanical properties. XRD and FT-IR results showed that PAA/Se-HA composites contained characteristic peaks of PAA and Se-HA with amide linkage and HA structures. DSC and TGA results specified the PAA/Se-HA30 composite crystallization, melting, and maximum weight loss temperatures at 203.33 °C, 162.54 °C, and 468.92 °C, respectively, which implied good thermal stability. SEM results showed that Se-HA was uniformly dispersed in PAA. The mechanical properties of PAA/Se-HA30 composites included bending, compressive, and yield strengths at 83.07 ± 0.57, 106.56 ± 0.46, and 99.17 ± 1.11 MPa, respectively. The cellular responses of PAA/Se-HA compositesin vitrowere studied using bone marrow mesenchymal stem cells (BMSCs) by cell counting kit-8 assay, and results showed that PAA/Se-HA30 composites significantly promoted the proliferation of BMSCs at the concentration of 2 mg ml-1. The alkaline phosphatase activity (ALP) and alizarin red staining results showed that the introduction of Se-HA into PAA enhanced ALP activity and formation of calcium nodule. Western blotting and Real-time polymerase chain reaction results showed that the introduction of Se-HA into PAA could promoted the expression of osteogenic-related proteins and mRNA (integrin-binding sialoprotein, osteopontin, runt-related transcription factor 2 and Osterix) in BMSCs. A muscle defect at the back and a bone defect at the femoral condyle of New Zealand white rabbits were introduced for evaluating the enhancement of bone regeneration of PAA and PAA/Se-HA30 composites. The implantation of muscle tissue revealed good biocompatibility of PAA and PAA/Se-HA30 composites. The implantation of bone defect showed that PAA/Se-HA30 composites enhanced bone formation at the defect site (8 weeks), exhibiting good bone conductivity. Therefore, the PAA-based composite was a promising candidate material for bone tissue regeneration.

A Structured Approach for Treating Calcium Hydroxylapatite Focal Accumulations.

BACKGROUND: Radiesse, a widely utilized calcium hydroxylapatite (CaHA) dermal filler, has shown effectiveness in soft tissue augmentation and regeneration. As with all dermal fillers, the potential for nodules may arise. Understanding the pathogenesis of these nodules and exploring effective treatment methodologies are crucial for optimizing patient outcomes. OBJECTIVES: A literature search was carried out to identify published literature documenting reversal of CaHA nodules. After identification, a consensus panel developed a structured approach, denoted by levels, for applying such reversal methods. METHODS: This concise review presents an algorithmic approach to addressing CaHA focal accumulations (noninflammatory nodules) based on invasiveness, cost, and potential risks based on published literature. RESULTS: Level 0 involves no intervention, relying on natural degradation for asymptomatic nodules. Level 1 interventions utilize mechanical dispersion techniques, including massage and in situ dispersion, which have demonstrated high success rates, cost effectiveness, and minimal invasiveness. Level 2 introduces alternative modalities such as pharmacological treatments with 5-fluorouracil and corticosteroids, lasers, and experimental approaches. Level 3 represents last-resort options, including calcium-chelating agents, manual removal, and surgical excision. CONCLUSIONS: The article offers a structured approach to managing CaHA focal accumulations.

High efficiency adsorption of uranium by magnesia-silica-fluoride co-doped hydroxyapatite.

Hydroxyapatite has a high affinity to uranium, and element doping can effectively improve its adsorption performance. In this study, magnesia-silica-fluoride co-doped hydroxyapatite composite was prepared by hydrothermal method, and the effect of single-phase and multiphase doping on the structure and properties of the composites was investigated. The results showed that the specific surface area of Mg-Si-F-nHA composites increased by 63.01% after doping. Comparing with nHA, U(VI) adsorption capacity of Si-nHA, Mg-Si-nHA and Mg-Si-F-nHA composites increased by 13.01%, 17.39% and 22.03%, respectively. The adsorption capacity of Mg-Si-F-nHA composite reached 1286.76 mg/g. Adsorbent dosage and pH obviously affected U(VI) adsorption, and the experimental data can be fitted well by PSO and Sips models. The physicochemical characterization before and after adsorption suggested that complexation, ion exchange and precipitation participated in uranium adsorption. In conclusion, different elements doping can effectively improve the uranium adsorption properties of hydroxyapatite composites.

Bionic Bilayer Scaffold for Synchronous Hyperthermia Therapy of Orthotopic Osteosarcoma and Osteochondral Regeneration.

Large osseous void, postsurgical neoplastic recurrence, and slow bone-cartilage repair rate raise an imperative need to develop functional scaffold in clinical osteosarcoma treatment. Herein, a bionic bilayer scaffold constituting croconaine dye-polyethylene glycol@sodium alginate hydrogel and poly(l-lactide)/hydroxyapatite polymer matrix is fabricated to simultaneously achieve a highly efficient killing of osteosarcoma and an accelerated osteochondral regeneration. First, biomimetic osteochondral structure along with adequate interfacial interaction of the bilayer scaffold provide a structural reinforcement for transverse osseointegration and osteochondral regeneration, as evidenced by upregulated specific expressions of collagen type-I, osteopontin, and runt-related transcription factor 2. Meanwhile, thermal ablation of the synthesized nanoparticles and mitochondrial dysfunction caused by continuously released hydroxyapatite induce residual tumor necrosis synergistically. To validate the capabilities of inhibiting tumor growth and promoting osteochondral regeneration of our proposed scaffold, a novel orthotopic osteosarcoma model simulating clinical treatment scenarios of bone tumors is established on rats. Based on amounts of in vitro and in vivo results, an effective killing of osteosarcoma and a suitable osteal-microenvironment modulation of such bionic bilayer composite scaffold are achieved, which provides insightful implications for photonic hyperthermia therapy against osteosarcoma and following osseous tissue regeneration.

Risedronate-functionalized manganese-hydroxyapatite amorphous particles: A potent adjuvant for subunit vaccines and cancer immunotherapy.

The cGAS-STING pathway and the Mevalonate Pathway are druggable targets for vaccine adjuvant discovery. Manganese (Mn) and bisphosphonates are known to exert adjuvant effects by targeting these two pathways, respectively. This study found the synergistic potential of the two pathways in enhancing immune response. Risedronate (Ris) significantly amplified the Mn adjuvant early antibody response by 166-fold and fortified its cellular immunity. However, direct combination of Mn2+ and Ris resulted in increased adjuvant toxicity (40% mouse mortality). By the combination of doping property of hydroxyapatite (HA) and its high affinity for Ris, we designed Ris-functionalized Mn-HA micro-nanoparticles as an organic-inorganic hybrid adjuvant, named MnHARis. MnHARis alleviated adjuvant toxicity (100% vs. 60% survival rate) and exhibited good long-term stability. When formulated with the varicella-zoster virus glycoprotein E (gE) antigen, MnHARis triggered a 274.3-fold increase in IgG titers and a 61.3-fold surge in neutralization titers while maintaining a better long-term humoral immunity compared to the aluminum adjuvant. Its efficacy spanned other antigens, including ovalbumin, HPV18 VLP, and SARS-CoV-2 spike protein. Notably, the cellular immunity elicited by the group of gE + MnHARis was comparable to the renowned Shingrix®. Moreover, intratumoral co-administration with an anti-trophoblast cell surface antigen 2 nanobody revealed synergistic antitumor capabilities. These findings underscore the potential of MnHARis as a potent adjuvant for augmenting vaccine immune responses and improving cancer immunotherapy outcomes.

Sandwich hydrogel to realize cartilage-mimetic structures and performances from polyvinyl alcohol, chitosan and sodium hyaluronate.

Developing artificial substitutes that mimic the structures and performances of natural cartilage is of great importance. However, it is challenging to integrate the high strength, excellent biocompatibility, low coefficient of friction, long-term wear resistance, outstanding swelling resistance, and osseointegration potential into one material. Herein, a sandwich hydrogel with cartilage-mimetic structures and performances was prepared to achieve this goal. The precursor hydrogel was obtained by freezing-thawing the mixture of poly vinyl alcohol, chitosan and deionized water three cycles, accompanied by soaking in sodium hyaluronate solution. The top of the precursor hydrogel was hydrophobically modified with lauroyl chloride and then loaded with lecithin, while the bottom was mineralized with hydroxyapatite. Due to the multiple linkages (crystalline domains, hydrogen bonds, and ionic interactions), the compressive stress was 71 MPa. Owing to the synergy of the hydrophobic modification and lecithin, the coefficient of friction was 0.01. Additionally, no wear trace was observed after 50,000 wear cycles. Remarkably, hydroxyapatite enabled the hydrogel osseointegration potential. The swelling ratio of the hydrogel was 0.06 g/g after soaking in simulated synovial fluid for 7 days. Since raw materials were non-toxic, the cell viability was 100 %. All of the above merits make it an ideal material for cartilage replacement.

The potential for synthesized invasive plant biochar with hydroxyapatite to mitigate allelopathy of Solidago canadensis.

Few studies tried to explore the mitigation effect and underlying mechanisms of biochar and their complex for negative allelopathy from invasive plants, which may provide a new way in the invasive plant management. Herein, an invasive plant (Solidago canadensis)-derived biochar (IBC) and its composite with hydroxyapatite (HAP/IBC) were synthesized by high temperature pyrolysis, and characterized by scanning electron microscopy, energy dispersion spectrometer, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Then, both the batch adsorption and pot experiments were conducted to compare the removal effects of kaempferol-3-O-ß-D-glucoside (C21 H20 O11 , kaempf), an allelochemical from S. canadensis, on IBC and HAP/IBC, respectively. HAP/IBC showed a stronger affinity for kaempf than IBC due to its higher specific surface area, more functional groups (P-O, P-O-P, PO4 3- ), stronger crystallization [Ca3 (PO4 )2 ]. The maximum kaempf adsorption capacity on HAP/IBC was six times higher than on IBC (10.482 mg/g > 1.709 mg/g) via π-π interactions, functional groups, and metal complexation. The kaempf adsorption process could be fitted best by both pseudo-second-order kinetic and Langmuir isotherm models. Furthermore, HAP/IBC addition into soils could enhance and even recover the germination rate and/or seedling growth of tomato inhibited by negative allelopathy from the invasive S. canadensis. These results indicate that the composite of HAP/IBC could more effectively mitigate the allelopathy from S. canadensis than IBC, which may be a potential efficient approach to control the invasive plant and improve invaded soils.

Synthesis of Pectin and Eggshell Biowaste-Mediated Nano-hydroxyapatite (nHAp), Their Physicochemical Characterizations, and Use as Antibacterial Material.

The current study reports the synthesis of sustainable nano-hydroxyapatite (nHAp) using a wet chemical precipitation approach. The materials used in the green synthesis of nHAp were obtained from environmental biowastes such as HAp from eggshells and pectin from banana peels. The physicochemical characterization of obtained nHAp was carried out using different techniques. For instance, X-ray diffractometer (XRD) and FTIR spectroscopy were used to study the crystallinity and synthesis of nHAp respectively. In addition, the morphology and elemental composition of nHAP were studied using FESEM equipped with EDX. HRTEM showed the internal structure of nHAP and calculated its grain size which was 64 nm. Furthermore, the prepared nHAp was explored for its antibacterial and antibiofilm activity which has received less attention previously. The obtained results showed the potential of pectin-bound nHAp as an antibacterial agent for various biomedical and healthcare applications.

Porous scaffold hydroxyapatite from sand lobster shells (Panulirus homarus) using polyethylene oxide/chitosan as polymeric porogen for bone tissue engineering.

The hydroxyapatite (HAp; Ca10 (PO4 )6 (OH)2 )) has good biocompatibility, bioactivity, and osteoconductivity as a bone implant because the main inorganic mineral of human bone is HAp. The use of scaffold HAp from biogenic resources that contain high calcium and polymer as a pore forming agent to support bone growth is a longstanding area of interest. In this study, porous scaffolds based on HAp were synthesized from sand lobster (SL; Panulirus homarus) shells as a source of calcium using the porogen leaching method with polyethylene oxide (PEO) and chitosan (Chs) as polymeric porogen. The present study aims to synthesize HAp derived from SL shells and evaluate the effect variations of PEO on the physicochemical properties of the scaffold and cytotoxicity in cell viability assay. Briefly, the SL shell powder was calcinated with temperature variations of 600°C, 800°C, and 1000°C for 6 h. Based on the characterization, it was shown that 1000°C was the optimum calcination temperature for SL shells to synthesize HAp using the precipitation method. The characterization results of HAp using energy dispersive x-ray (EDX) revealed that the molar ratio of Ca/P was 1.67. The Fourier transform infrared (FTIR) and x-ray diffractometer (XRD) spectral patterns indicated that HAp had been successfully synthesized with minor ß-tricalcium phosphate (ß-TCP), a calcium phosphate with high biocompatibility. Porous scaffolds were synthesized by varying the concentration of PEO at 0, 5, 10, and 15 wt %. Physicochemical analysis revealed that a higher concentration of PEO affected decreased crystallinity and compressive strength, but on the other hand, the porosity and pore sizes increased. Based on the physicochemical analysis, the synthesized porous scaffold showed that HAp/PEO/Chs 15 wt % had the most potential as a scaffold for biomedical applications. MTT Assay, after 24 h incubation, revealed that the scaffold was safe for use at low concentrations on the MC3T3E1 osteoblast cells, with a percentage of cell viability of 83.23 ± 3.18% at 23.4375 µg/mL. Although the cell viability decreased at higher concentrations, the HAp/PEO/Chs 15 wt % scaffold was cytocompatible with the cells. Thus, in the present study, HAp/PEO/Chs 15 wt % was the best scaffold based on pore structure, chemical composition, mechanical and crystalographic properties and cell viability.

Gypsum-Related Impact on Antibiotic-Loaded Composite Based on Highly Porous Hydroxyapatite-Advantages and Disadvantages.

Highly porous hydroxyapatite is sometimes considered toxic and useless as a biomaterial for bone tissue regeneration because of the high adsorption of calcium and phosphate ions from cell culture media. This negatively affects the osteoblast's growth in such ion-deprived media and suggests "false cytotoxicity" of tested hydroxyapatite. In our recent study, we showed that a small addition of calcium sulfate dihydrate (CSD) may compensate for this adsorption without a negative effect on other properties of hydroxyapatite-based biomaterials. This study was designed to verify whether such CSD-supplemented biomaterials may serve as antibiotic carriers. FTIR, roughness, mechanical strength analysis, drug release, hemocompatibility, cytotoxicity against human osteoblasts, and antibacterial activity were evaluated to characterize tested biomaterials. The results showed that the addition of 1.75% gypsum and gentamicin caused short-term calcium ion compensation in media incubated with the composite. The combination of both additives also increased antibacterial activity against bacteria representative of bone infections without affecting osteoblast proliferation, hemocompatibility, and mechanical parameters. Thus, gypsum and antibiotic supplementation may provide advanced functionality for bone-regeneration materials based on hydroxyapatite of a high surface area and increasingly high Ca2+ sorption capacity.

Hydroxyapatite fortified mango mousse: Formulation, characterization, and sensory data evaluation using fuzzy logic.

In this experimental study, hydroxyapatite (HAp), as a valuable calcium source, was extracted from discarded goat bone; raw and nano-biogenic powders were prepared through calcination and ultra-sonication. Resultant powders were characterized by using various spectroscopy techniques. As per the findings of atomic absorption spectroscopy, raw and nano-biogenic powders depicted 1439.7 ± 0.12 and 3194.8 ± 0.07 ppm calcium content, respectively. The range of particle size of nano-biogenic and raw powders was 47-139 and 183 nm, respectively. X-ray diffraction (XRD) confirmed crystalline behavior whereas laser-induced breakdown spectroscopy (LIBS)-derived Ca/P-ratio endorsed excellence in nano-biogenic 1.76 against 1.63 in raw powder. In vitro bioavailability of calcium in raw and nano-biogenic powder was ∼36% and ∼39%, respectively. Next, the powders were further used to develop calcium-fortified mango mousse with varied formulations. A maximum overrun of 23.31% was found in the case of "Raw-A," whereas a maximum viscosity of 8489.98 mPa s was found in the case of "Nano-A." Sensory data of mango mousse were obtained by fuzzy logic method, and PCA ranked the Nano-B and Nano-A samples the best in terms of overall acceptability. Meanwhile, the consumer responses toward product likeness and/or dislikeness were recorded by the hedonic scale that endorsed Nano-A and Nano-B formulations as the most preferred samples. PRACTICAL APPLICATION: The revolution in the eating habits of consumers from traditional foods to fast food imposes the development of new products having good nutritional values. Different waste biogenic food sources can provide an acceptable powdered form of ingredients for the development of novel food products. In this regard, the development of novel food products using calcium supplements has gained space in the food industry.

Effectiveness of plant-mediated synthesis of hydroxyapatite nano-particles impregnated in Pistachio oleogum resin on mineral contents of human teeth. An in-situ single-blind controlled study.

OBJECTIVES: This study aimed to synthesize and characterize an environmentally friendly nanohydroxyapatite (n-HA) and evaluate its impact on enamel mineral content when incorporated into a Pistachio oleo gum resin (Saqqez) bio-chewing gum for in-situ models. We compared the effects of this green nano-hydroxyapatite (G n-HA) with those of a commercially available synthetic nano-hydroxyapatite (S n-HA). METHODS: Various analytical techniques were employed including XRD, FESEM, FT-IR, EDX/SEM and TGA/DTA to characterize the crystallinity, size and composition of the G n-HA powder. Three chewing gum groups were formulated: (1) Saqqez gum containing 10% wt G n-HA, (2) Saqqez gum containing 10% wt S n-HA, and (3) pure Saqqez gum. In order to evaluate the impact of these chewing gums on enamel, intraoral appliances were fabricated, each containing six enamel specimens. Participants were instructed to chew the gums while wearing these appliances. The calcium (Ca+2) and phosphorus (P) levels in enamel specimens, both with and without exposure to an acid challenge, were quantified using EDX/SEM. FE-SEM was employed to capture the microstructure of the enamel surface. In terms of the statistical analysis, one-way ANOVA and Tukey's post hoc tests were utilized to compare the data, where the significance level (α) was set at 0.05. RESULTS: The characterization tests confirmed the successful synthesis of G n-HA. Furthermore, EDX/SEM analysis of the enamel specimens from the intraoral appliance revealed significant variations in calcium (Ca+2) content among the enamel specimens (P = 0.000). The S n-HA group, in particular, exhibited the highest Ca+2 content, while the pure Saqqez group displayed the lowest. Nonetheless, there was no statistically significant differences in phosphorus (P) content observed among the three groups (P = 0.27). CONCLUSIONS: Saqqez gum can be considered a wholesome natural chewing gum that serves, as a carrier for delivering remineralization agents to the tooth surfaces. This was evident in the groups containing n-HA, exhibiting elevated Ca+2 levels. It's noteworthy that G n-HA demonstrated less efficacy in enamel remineralization compared to S n-HA.

Biomimetic synthesis of polydopamine-graphene oxide/hydroxyapatite for efficient and fast uranium(VI) capture from aqueous solution.

A novel and efficient mesoporous nano-absorbent for U(VI) removal was developed through an environment-friendly route by inducing the biomimetic mineralization of hydroxyapatite (HAP) on the bioinspired surface of polydopamine-graphene oxide (PDA-GO). PDA-GO/HAP exhibited the greatly rapid and efficient U(VI) removal within 2 min, and much higher U(VI) adsorption capacity of 433.07 mg·g-1 than that of GO and PDA-GO. The enhanced adsorption capacity was mainly attributed to the synergistic effect of O-H, -C=N-, and PO43- functional groups and the incorporation of uranyl ions by the formation of a new phase (chernikovite, H2(UO2)2(PO4)2·8H2O). The adsorption process of U(VI) fitted well with pseudo-second-order kinetic and Langmuir isotherm model. Moreover, PDA-GO/HAP showed a high U(VI) adsorption capacity in a broad range of pH values and owned good thermal stability. PDA-GO/HAP with various excellent properties made it a greatly promising adsorbent for extracting uranium. Our work developed a good strategy for constructing fast and efficient uranium-adsorptive biomimetic materials.

Study of nano-hydroxyapatite tagged alkaline protease isolated from Himalayan sub-alpine Forest soil bacteria and role in recalcitrant feather waste degradation.

Purified calcium serine metalloprotease from Stenotrophomonas maltophilia strain SMPB12 exhibits highest enzyme activity at pH 9 and temperature range between 15 °C-25 °C. Enzyme supplemented with 40 µM Ca-Hap-NP (NP-protease) showed maximum elevated activity of 17.29 µmole/min/ml (1.9-fold of original protease activity). The thermostability of the enzyme was maintained for 1 h at 60 °C over an alkaline pH range 7.5-10, as compared to the NP untreated enzyme whose activity was of 8.97 µmole/min/ml. A significant loss of activity with EDTA (1.05 µmole/min/ml, 11.75 %), PMSF (0.93 µmole/min/ml, 10.46 %) and Hg2+ (3.81 µmole/min/ml, 42.49 %) was also observed. Kinetics study of NP-protease showed maximum decreases in Km (28.11 %) from 0.28 mM (NP untreated enzyme) to 0.22 mM (NP-protease) along with maximum increase in Vmax (42.88 %) from 1.25 µmole/min/ml to 1.79 µmole/min/ml at varying temperatures. The enhanced activity of NP-protease was able to efficiently degrade recalcitrant solid wastes like feather to produce value-added products like amino acids and helps in declogging recalcitrant solid wastes. The nano-enabled protease may be utilized in a smaller amount for degrading in bulk recalcitrant solid proteinaceous waste at 15 °C temperature as declogging agents providing an eco-friendly efficient process.

Tunable Stress Relaxing Biomimetic Matrices: Hyaluronan/Hydroxyapatite Hybridization Mediates Assembly of Collagen Fibrils.

The alluring correlations of cellular behaviors with viscoelastic extracellular matrices have driven increasing endeavors directed toward the understanding of mechanical cues on cell growth and differentiation via preparing biomimetic scaffolds/gels with viscoelastic controllability. Indeed, systematic investigations, especially into calcium phosphate-containing biomimetics, are relatively rare. Here, oxidized hyaluronic acid/hydroxyapatite hybrids (OHAHs) were synthesized by hyaluronan-mediated biomimetic mineralization with confined ion diffusion and subsequent oxidization treatment. The collagen self-assembly was applied to fabricate tunable stress relaxing fibrillar matrices in the presence of OHAHs in which the incorporated hyaluronic acid with aldehyde groups acted to improve the component compatibility as well as to supplement the molecular interactions with the occurrence of a Schiff-base reaction. With the addition of varying OHAH contents, the self-assembly behavior of collagen was altered, and the obtained collagen-hybrid (CH) matrices presented a heterogeneous fibrillar structure interspersed with OHAHs, characterized by large fibrillar bundles coexisting with small fibrils. The OHAHs improved the hydrogel stability of pure collagen, and according to rheological and nanoindentation measurements, CH matrices also exhibited tunable stress relaxation rates, following an OHAH concentration-dependent fashion. The proliferation and spreading of MC3T3-E1 cells cultured onto such CH matrices were further found to increase with the stress relaxing rate of the matrices. The present study showed that the introduction of hydroxyapatite incorporated with active hyaluronic acid during collagen reconstitution was a simple and effective strategy to realize the preparation of tunable stress relaxing biomimetic matrices potentially used for further appraising the regulation of mechanical cues on cell behaviors.

Optimizing Skin Regenerative Response to Calcium Hydroxylapatite Microspheres Via Poly-Micronutrient Priming.

Regenerative aesthetics aims to restore the structure and function of aging skin. Two products, Radiesse (CaHA) and NCTF 135 HA (micronutrient mesotherapy) have been established as minimally invasive treatments that restore the structure and function of various skin components. It has been anecdotally observed by the authors, however, that some patients respond suboptimally to regenerative treatments without a clear indication as to why. It was hypothesized that micronutrient deficiencies in some patients may contribute to their lack of responsiveness and that a concurrent delivery of amino acids and co-enzymes may create a nutritional reservoir necessary for optimal protein synthesis. Noting that CaHA is known to drive the regeneration of extracellular matrix proteins, the aim of this case series was to investigate if “priming” the skin with NCTF 135 HA could lead to enhanced clinical effects of CaHA. The combination treatment resulted in improvements in panfacial aesthetics, skin laxity, wrinkle severity, skin luminosity, hyperpigmentation, and in skin and subcutis thicknesses in 100% of patients following a single treatment. This study is the first to introduce skin priming via diluting a regenerative biostimulator treatment with an amino acid-based diluent.  Citation: Theodorakopoulou  E, McCarthy A, Perico V, et al. Optimizing skin regenerative response to calcium hydroxylapatite microspheres via poly-micronutrient priming. J Drugs Dermatol. 2023;22(9):925-934. doi:10.36849/JDD.7405.

Selenium- and/or copper-substituted hydroxyapatite: A bioceramic substrate for biomedical applications.

Atomic substitution or doping of a bioceramic material hydroxyapatite (HA) with specific ions is an appealing approach for improving its biocompatibility and activity, as well as imparting antibacterial properties. In this study, selenium- and/or copper-substituted hydroxyapatite powders were synthesized by an aqueous precipitation method and using the freeze-drying technique. The molar concentrations of constituents were calculated based on the proposed mechanism whereby selenium (Se4+) ions partially substitute phosphorus (P5+) sites, and copper (Cu2+) ions partially substitute (Ca2+) sites in the HA lattice. Dried precipitated samples were characterized using Inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FTIR) and Field-emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX). Accordingly, substitution of Se4+ and/or Cu2+ ions took place in the crystal lattice of HA without the formation of any impurities. The presence of sulphur (S2-) ions in the hydroxyapatite was detected by ICP-OES in all samples with copper substituted in the lattice. The cytotoxicity of the powders on osteoblastic (MC3T3-E1) cells was evaluated in vitro. Selenium substituted hydroxyapatite (SeHA), at the concentration (200 µg/mL), demonstrated higher populations of the live cells than that of control (cells without powders), suggesting that selenium may stimulate the proliferation of these cells. In addition, the copper substituted hydroxyapatite (CuHA) and the selenium and copper substituted hydroxyapatite (SeCuHA) at the concentrations (200 and 300 µg/mL) and (200 µg/mL), respectively demonstrated better results than the unsubstituted HA. Antimicrobial activity was assessed using a well-diffusion method against Streptococcus mutans and Candida albicans, and superior results has obtained with SeCuHA samples. Presented findings imply that selenium and/or copper substituted modified hydroxyapatite nanoparticles, may be an attractive antimicrobial and cytocompatible substrate to be considered for use in a range of translational applications.