ABSTRACT
For some food applications, it is desirable to control the flavor release profiles of volatile flavor compounds. In this study, the effects of crosslinking method and protein composition on the flavor release properties of emulsion-filled protein hydrogels were explored, using peppermint essential oil as a model volatile compound. Emulsion-filled protein gels with different properties were prepared using different crosslinking methods and gelatin concentrations. Flavor release from the emulsion gels was then monitored using an electronic nose, gas chromatography-mass spectrometry (GC-MS), and sensory evaluation. Enzyme-crosslinked gels had greater hardness and storage modulus than heat-crosslinked ones. The hardness and storage modulus of the gels increased with increasing gelatin concentration. For similar gel compositions, flavor release and sensory perception were faster from the heat-crosslinked gels than the enzyme-crosslinked ones. For the same crosslinking method, flavor release and perception decreased with increasing gelatin concentration, which was attributed to retardation of flavor diffusion through the hydrogel matrix. Overall, this study shows that the release of hydrophobic aromatic substances can be modulated by controlling the composition and crosslinking of protein hydrogels, which may be useful for certain food applications.
Subject(s)
Emulsions , Flavoring Agents , Gas Chromatography-Mass Spectrometry , Mentha piperita , Plant Oils , Mentha piperita/chemistry , Emulsions/chemistry , Humans , Plant Oils/chemistry , Flavoring Agents/chemistry , Gelatin/chemistry , Cross-Linking Reagents/chemistry , Taste , Hydrogels/chemistry , Electronic Nose , Male , Female , AdultABSTRACT
Wound healing is a dynamic and complex biological process, and traditional biological excipients cannot meet the needs of the wound healing process, and there is an urgent need for a biological dressing with multifunctionality and the ability to participate in all stages of wound healing. This study developed tea polyphenol (TP) incorporated multifunctional hydrogel based on oxidized Bletilla striata polysaccharide (OBSP) and adipic acid dihydrazide modified gelatin (Gel-ADH) with antimicrobial, antioxidant hemostatic, and anti-inflammatory properties to promote wound healing. The composite OBSP, Gel-ADH, TP (OBGTP) hydrogels prepared by double crosslinking between OBSP, TP and Gel-ADH via Schiff base bonding and hydrogen bonding had good rheological and swelling properties. The introduction of TP provided the composite hydrogel with excellent antioxidant antibacterial activities against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coil). In the rat liver hemorrhage model and skin injury model, the OBGTP composite hydrogel had significant (p < 0.001) hemostatic ability, and had the ability to accelerate collagen deposition, reduce the expression of inflammatory factors, and promote rapid wound healing. In addition, OBGTP hydrogels had adhesive properties and good biocompatibility. In conclusion, OBGTP multifunctional composite hydrogels have great potential for wound healing applications.
Subject(s)
Hemostatics , Orchidaceae , Animals , Rats , Gelatin , Hydrogels , Antioxidants/pharmacology , Staphylococcus aureus , Wound Healing , Anti-Bacterial Agents/pharmacology , Escherichia coli , Polyphenols/pharmacology , TeaABSTRACT
Three-dimensional liver bioprinting is an emerging technology in the field of regenerative medicine that aids in the creation of functional tissue constructs that can be used as transplantable organ substitutes. During transplantation, the bioprinted donor liver must be protected from the oxidative stress environment created by various factors during the transplantation procedure, as well as from drug-induced damage from medications taken as part of the post-surgery medication regimen following the procedure. In this study, Silymarin, a flavonoid with the hepatoprotective properties were introduced into the GelMA bioink formulation to protect the bioprinted liver against hepatotoxicity. The concentration of silymarin to be added in GelMA was optimised, bioink properties were evaluated, and HepG2 cells were used to bioprint liver tissue. Carbon tetrachloride (CCl4) was used to induce hepatotoxicity in bioprinted liver, and the effect of this chemical on the metabolic activities of HepG2 cells was studied. The results showed that Silymarin helps with albumin synthesis and shields liver tissue from the damaging effects of CCl4. According to gene expression analysis, CCl4 treatment increased TNF-α and the antioxidant enzyme SOD expression in HepG2 cells while the presence of silymarin protected the bioprinted construct from CCl4-induced damage. Thus, the outcomes demonstrate that the addition of silymarin in GelMA formulation protects liver function in toxic environments.
Subject(s)
Acrylamides , Chemical and Drug Induced Liver Injury , Liver Transplantation , Silymarin , Humans , Silymarin/metabolism , Silymarin/pharmacology , Carbon Tetrachloride , Gelatin , Plant Extracts/chemistry , Living Donors , Liver , Antioxidants/metabolism , Chemical and Drug Induced Liver Injury/metabolismABSTRACT
Percutaneous thermotherapy, a minimally invasive operational procedure, is employed in the ablation of deep tumor lesions by means of target-delivering heat. Conventional thermal ablation methods, such as radiofrequency or microwave ablation, to a certain extent, are subjected to extended ablation time as well as biosafety risks of unwanted overheating. Given its effectiveness and safety, percutaneous thermotherapy gains a fresh perspective, thanks to magnetic hyperthermia. In this respect, an injectable- and magnetic-hydrogel-construct-based thermal ablation agent is likely to be a candidate for the aforementioned clinical translation. Adopting a simple and environment-friendly strategy, a magnetic colloidal hydrogel injection is introduced by a binary system comprising super-paramagnetic Fe3O4 nanoparticles and gelatin nanoparticles. The colloidal hydrogel constructs, unlike conventional bulk hydrogel, can be easily extruded through a percutaneous needle and then self-heal in a reversible manner owing to the unique electrostatic cross-linking. The introduction of magnetic building blocks is exhibited with a rapid magnetothermal response to an alternating magnetic field. Such hydrogel injection is capable of generating heat without limitation of deep penetration. The materials achieve outstanding therapeutic results in mouse and rabbit models. These findings constitute a new class of locoregional interventional thermal therapies with minimal collateral damages.
Subject(s)
Carcinoma, Hepatocellular , Colloids , Hydrogels , Liver Neoplasms , Animals , Rabbits , Mice , Hydrogels/chemistry , Liver Neoplasms/therapy , Liver Neoplasms/pathology , Carcinoma, Hepatocellular/therapy , Carcinoma, Hepatocellular/pathology , Colloids/chemistry , Gelatin/chemistry , Humans , Magnetite Nanoparticles/chemistry , Magnetite Nanoparticles/therapeutic use , Hyperthermia, Induced/methods , Cell Line, Tumor , Injections , Magnetic Iron Oxide Nanoparticles/chemistryABSTRACT
Background: Menopause is typically accompanied by significant systemic and oral manifestations, including hormonal changes and increased susceptibility to periodontal disease, which may involve inflammatory biomarkers like aspartate aminotransferase (AST) and osteocalcin in gingival crevicular fluid (GCF). The study is aimed at evaluating the effectiveness of regular inoculation of polyunsaturated fatty acids (PUFAs) as an adjunctive treatment for menopausal women's periodontitis. Methods: Twenty elderly women with chronic periodontitis were split evenly into two groups by random assignment. Patients in group II (the research group) were given soft gelatin capsules containing PUFAs to be consumed directly once daily for 12 months, as opposed to group I (the control group), who received soft gelatin capsules containing some olive oil (placebo). Scaling and root planning (SRP) were used to address periodontal disease in all cases. Results: At baseline, six and twelve months after treatment, clinical indicators and AST and osteocalcin amounts in the GCF were noted. By the conclusion of the research period, all observed clinical measurements had changed significantly and improved. In addition, there had been a significant decrease in AST levels and a nonsignificant decrease in osteocalcin levels in group II compared to group I. Conclusions: Menopausal women with periodontitis who take omega-3 fatty acid supplements in addition to SRP have better oral health. Significant improvements in clinical indicators and a notable decrease in AST levels within the GCF were observed. However, further research with larger cohorts and extended duration is needed to validate these findings and explain potential mechanisms. This trial is registered with NCT06254118.
Subject(s)
Chronic Periodontitis , Gelatin , Humans , Female , Aged , Osteocalcin , Chronic Periodontitis/therapy , Menopause , Double-Blind Method , Gingival Crevicular FluidABSTRACT
AIM: To optimise, and characterise gelatine nanoparticles (GNPs) encapsulating plant extracts and evaluate the glucose-lowering potential. METHODS: GNPs encapsulating plant extracts were prepared by desolvation method followed by adsorption. The GNPs were characterised by loading efficiency, loading capacity, particle size, zeta potential, SEM and FTIR. The glucose-lowering activity of GNPs was determined using oral glucose tolerance test in high-fat diet fed streptozotocin-induced Wistar rats. RESULTS: Loading efficiency and capacity, particle mean diameter, and zeta potential of optimised GNPs 72.45 ± 13.03% w/w, 53.05 ± 26.16% w/w, 517 ± 48 nm and (-)23.43 ± 9.96 mV respectively. GNPs encapsulating aqueous extracts of C. grandis, S. auriculata, and ethanol 70% v/v extracts of M. koenigii showed glucose-lowering activity by 17.62%, 11.96% and 13.73% (p < 0.05) compared to the non-encapsulated extracts. FTIR analysis confirmed the encapsulation of phytoconstituents into GNPs. SEM imaging showed spherical GNPs (174 ± 46 nm). CONCLUSION: GNPs encapsulating plant extracts show promising potential to be developed as nanonutraceuticals against diabetes.
Subject(s)
Diabetes Mellitus, Type 2 , Metal Nanoparticles , Rats , Animals , Diabetes Mellitus, Type 2/drug therapy , Rats, Wistar , Plants, Edible , Gelatin , Glucose , Plant Extracts/pharmacologyABSTRACT
Plant essential oils possess broad-spectral antimicrobial property, but the applications are impeded by their insolubility in water, extreme volatility, and strong irritation. Nanoparticle-stabilized emulsion (Pickering emulsion) gels are colloidal systems with ability to accommodate two immiscible phases in one system. The thick adsorption nanoparticle layers and the cross-linked networks in continuous phase could provide protective barriers for antibacterial oil and achieve on-demand controlled release. An emulsion hydrogel templated from gelatin nanoparticle-stabilized emulsion is one-pot constructed by conducting a tunable cross-linking process between oxidized dextran (Odex) and amikacin in the continuous phase and concomitantly trapping tea tree essential oil (TO) droplets in the three-dimensional network. The resulted emulsion hydrogel presents tunable gelation time, adequate mechanical strength, fascinating injectability, and self-healing capability. It is pH-responsiveness and presents controlled release of amikacin and TO, exhibiting a long-term bacteriostasis of 144 h. The emulsion hydrogel facilitates the outstanding wound healing efficiency in 14 days (95.2 ± 0.8 % of wound closure), accompanied with enhanced collagen deposition and angiogenic activities. The incorporation of TO into emulsion hydrogel system reduced its irritation and improved its biosafety, showing potential application in bacteria inhibition even as implants in vivo.
Subject(s)
Amikacin , Nanoparticles , Amikacin/pharmacology , Gelatin , Dextrans , Hydrogels , Emulsions , Delayed-Action Preparations/pharmacology , Drug Liberation , Anti-Bacterial Agents/pharmacology , Wound HealingABSTRACT
In this study, dialdehyde carboxymethyl cellulose (DCMC, 10 wt% based on gelatin) and varying contents of coffee leaf extract (CLE, 1, 3, 5 and 7 wt% based on gelatin) were incorporated into gelatin (GEL) matrix to develop multifunctional food packaging films. DCMC acted as a physical reinforcing filler through crosslinking with GEL matrix by Schiff-base reaction, CLE served as an active filler to confer film functional properties. The micro-morphology, micro-structure, physicochemical and functional properties of the GEL/DCMC/CLE composite film were investigated. The results demonstrated that mechanical, barrier properties and thermal stability of films were significantly improved by incorporation of CLE. Compared with pure GEL film, the GEL/DCMC/5%CLE film exhibited excellent UV light blocking while kept enough transparency, the best mechanical property, water resistance, water vapor and oxygen barrier, as well as thermal stability. GEL/DCMC/5%CLE film also possessed strong antioxidant activity and some antibacterial activity against E. coli and S. aureus. Packaging application testing demonstrated that the resultant GEL/DCMC/5%CLE film effectively delayed the lipid oxidation of walnut oil and preserved the postharvest freshness of fresh walnut kernels under ambient conditions.
Subject(s)
Carboxymethylcellulose Sodium , Food Packaging , Carboxymethylcellulose Sodium/chemistry , Gelatin/chemistry , Escherichia coli , Staphylococcus aureus , Plant Extracts/pharmacologyABSTRACT
Infected wound management is a great challenge to healthcare, especially in emergencies such as accidents or battlefields. Hydrogels as wound dressings can replace or supplement traditional wound treatment strategies, such as bandages or sutures. It is significant to develop novel hydrogel-based wound dressings with simple operation, inexpensive, easy debridement, effective antibacterial, biocompatibility, etc. Here, we designed a novel gelatin-based hydrogel wound dressing Gel-TA-Fe3+. The hydrogels used tannic-modified gelatin as the main body and Fe3+ as the crosslinking agent to achieve a controllable rapid sol-gel transition. The hydrogels exhibited tough mechanical properties, excellent antibacterial ability, biocompatibility and an acceptable temperature response to near-infrared light (NIR). Moreover, the hydrogels could promote the healing process of MRSA-infected skin wound in rats. This multifunctional hydrogel was thought to have potential for emergency treatment of bacterial infected wound.
Subject(s)
Methicillin-Resistant Staphylococcus aureus , Wound Infection , Animals , Rats , Gelatin/pharmacology , Wound Healing , Dietary Supplements , Anti-Bacterial Agents/pharmacology , Hydrogels/pharmacology , Wound Infection/drug therapyABSTRACT
The periosteum, a vascularized tissue membrane, is essential in bone regeneration following fractures and bone loss due to some other reasons, yet there exist several research gaps concerning its regeneration. These gaps encompass reduced cellular proliferation and bioactivity, potential toxicity, heightened stiffness of scaffold materials, unfavorable porosity, expensive materials and procedures, and suboptimal survivability or inappropriate degradation rates of the implanted materials. This research used an interdisciplinary approach by forming a new material fabricated through electrospinning for the proposed application as a layer-by-layer tissue-engineered periosteum (TEP). TEP comprises poly(ε-caprolactone) (PCL), PCL/gelatin/magnesium-doped zinc oxide (vascular layer), and gelatin/bioactive glass/COD liver oil (osteoconductive layer). These materials were selected for their diverse properties, when integrated into the scaffold formation, successfully mimic the characteristics of native periosteum. Scanning electron microscopy (SEM) was employed to confirm the trilayer structure of the scaffold and determine the average fiber diameter. In-vitro degradation and swelling studies demonstrated a uniform degradation rate that matches the typical recovery time of periosteum. The scaffold exhibited excellent mechanical properties comparable to natural periosteum. Furthermore, the sustained release kinetics of COD liver oil were observed in the trilayer scaffold. Cell culture results indicated that the three-dimensional topography of the scaffold promoted cell growth, proliferation, and attachment, confirming its non-toxicity, biocompatibility, and bioactivity. This study suggests that the fabricated scaffold holds promise as a potential artificial periosteum for treating periostitis and bone fractures.
Subject(s)
Gelatin , Tissue Scaffolds , Tissue Scaffolds/chemistry , Gelatin/chemistry , Periosteum , Biomimetics , Cod Liver Oil , Polyesters/chemistry , Tissue Engineering/methodsABSTRACT
The purpose of this paper is to develop a cancer cell membrane biomimetic nanodrug delivery system (NDDS) to achieve an enhanced chemo-photothermal synergistic antitumor effect. The biomimetic NDDSs are composed of mitoxantrone (MIT)-loaded gelatin nanoparticles and IR820-encapsulated 4T1 cancer cell membrane-derived vesicles. The biomimetic NDDS displayed excellent stability and photothermal conversion efficiency. Compared to naked nanoparticles, the cell membrane-coated nanoparticles improved 4T1 cell uptake through homologous targeting and effectively reduced internalization of macrophages. In vivo photothermal imaging results further showed that the NDDS could be enriched at the tumor site for 48 h and could raise the temperature of the tumor area to 60 °C within 5 min under 808 nm laser irradiation. Finally, NDDS successfully inhibited primary tumor growth (over 89% inhibition) and significantly inhibited lung metastasis. This study may provide a new strategy for personalized chemotherapy-photothermal combination therapy of metastatic breast cancer using tumor cell membranes from cancer patients as drug carriers.
Subject(s)
Breast Neoplasms , Nanoparticles , Humans , Female , Breast Neoplasms/drug therapy , Mitoxantrone/therapeutic use , Gelatin , Photothermal Therapy , Biomimetics , Phototherapy/methods , Cell MembraneABSTRACT
The rising packaging industry together with global demand for sustainable production has increased the interest in developing biodegradable packaging materials. The aim of the study was to develop edible films based on pectin, gelatin, and hydroxypropyl methylcellulose and evaluate their applicability as biodegradable packaging materials for gilthead seabream fillets. Mechanical properties, water barriers, wettability of the films through contact angle measurement, optical, and UV-Vis barrier properties were evaluated for food packaging applications. The effective blend of polysaccharide and protein film-forming solutions was confirmed by the produced films with excellent optical properties, acceptable mechanical properties and adequate barriers to water vapor. The contact angle for pectin based and gelatin based films were higher than 90° indicating the hydrophobic films, while HPMC based films had contact angle lower than 90°. The produced films were tested as alternative and environmentally friendly packaging materials for gilthead seabream fillets during refrigerated storage. All tested packaging conditions resulted in similar shelf-life in packed gilthead seabream fillets (i.e. 7-8 days at 2 °C). The results showed that the developed films may reduce the use of conventional petroleum-based food packaging materials without affecting the shelf-life of fish.
Subject(s)
Edible Films , Sea Bream , Animals , Gelatin/chemistry , Food Packaging/methods , Polysaccharides , PectinsABSTRACT
This study explores the sustainable utilization of wastes from a papaya plant (papaya peels (PP), papaya seeds (PS), leaf-stem (PL)) and dried green tea residues (GTR) for the synthesis of bioplastics. The dried GTR were individually blended with each papaya waste extract and then boiled in water to get three composite papaya plant waste-green tea supernatants. Potato starch and gelatin-based functional films were prepared by integrating each with the composite papaya waste-green tea supernatant liquid. This work introduces a dissolved organic matter (DOM) study to the field of bioplastics, with the goal of identifying the organic components and macromolecules inherent in the PW supernatants. When compared with the films prepared solely from papaya waste (PW) supernatants, PW-GTR composite supernatant films prevent UV light transmission with superior antioxidant and mechanical properties. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction spectroscopy (XRD), and atomic force microscopy (AFM) were utilized to characterize the starch and gelatin PW-GTR films. Owing to the exceptional antioxidant, UV barrier, and remarkable biodegradable properties of the starch/PW/GTR and gelatin/PW/GTR composite films, make them ideal for use in food packaging applications.
Subject(s)
Carica , Food Packaging , Food Packaging/methods , Gelatin/chemistry , Antioxidants/chemistry , Tea/chemistry , Starch/chemistry , Spectroscopy, Fourier Transform InfraredABSTRACT
In patients with diabetic wounds, wound healing is impaired due to the presence of persistent oxidative stress, an altered inflammatory response, and impaired angiogenesis and epithelization. Salvianolic acid B (SAB), which is derived from the Chinese medicinal plant Salvia miltiorrhiza, has been found to exhibit antioxidant, anti-inflammatory, and proangiogenic effects. Previous studies have used 3D bioprinting technology incorporating sodium alginate (SA) and gelatin (Gel) as basic biomaterials to successfully produce artificial skin. In the current study, 3D bioprinting technology was used to incorporate SAB into SA-Gel to form a novel SAB-SA-Gel composite porous scaffold. The morphological characteristics, physicochemical characteristics, biocompatibility, and SAB release profile of the SAB-SA-Gel scaffolds were evaluated in vitro. In addition, the antioxidant, anti-inflammatory, and proangiogenic abilities of the SAB-SA-Gel scaffolds were evaluated in cells and in a rat model. Analysis demonstrated that 1.0 wt% (the percentage of SAB in the total weight of the solution containing SA and Gel) SAB-SA-Gel scaffolds had strong antioxidant, anti-inflammatory, and proangiogenic properties both in cells and in the rat model. The 1.0% SAB-SA-Gel scaffold reduced the expression of tumor necrosis factor-α, interleukin-6, and interluekin-1ß and increased the expression of transforming growth factor-ß. In addition, this scaffold removed excessive reactive oxygen species by increasing the expression of superoxide dismutase, thereby protecting fibroblasts from injury. The scaffold increased the expression of vascular endothelial growth factor and platelet/endothelial cell adhesion molecule-1, accelerated granulation tissue regeneration and collagen deposition, and promoted wound healing. These findings suggest that this innovative scaffold may have promise as a simple and efficient approach to managing diabetic wound repair.
Subject(s)
Benzofurans , Bioprinting , Depsides , Diabetes Mellitus , Humans , Rats , Animals , Gelatin/pharmacology , Antioxidants/pharmacology , Alginates/chemistry , Tissue Scaffolds/chemistry , Vascular Endothelial Growth Factor A/pharmacology , Wound Healing , Anti-Inflammatory Agents/pharmacologyABSTRACT
Novel antioxidant and antibacterial composite films were fabricated by incorporating pomegranate peel extract (PPE) into gelatin and carboxymethyl cellulose matrices. Increasing PPE concentration significantly (p < 0.05) altered physical properties and improved UV (decrease in light transmission 87.30 % to 9.89 % at 400 nm) and water resistance, while FTIR and molecular docking results revealed hydrogen bonding between PPE and film matrix. PPE incorporation enhanced antioxidant activity up to 84.15 ± 0.12 % and also restricted gram-positive and gram-negative bacterial growth by 72.4 % and 65.9 % respectively after 24 h, measured by antimicrobial absorption assays. For beef packaging applications at refrigeration temperatures, PPE films were most effective at extending shelf-life up to 3 days, as evidenced by reduced total viable counts, total volatile basic nitrogen, weight loss, and pH changes compared to control films. Therefore, these antioxidant and antibacterial films have potential applications in food packaging to protect against mechanical stress, light exposure, microbial spoilage, and oxidative free radicals.
Subject(s)
Edible Films , Pomegranate , Animals , Cattle , Anti-Bacterial Agents/chemistry , Antioxidants/chemistry , Pomegranate/chemistry , Gelatin/chemistry , Carboxymethylcellulose Sodium/metabolism , Molecular Docking Simulation , Food Packaging/methods , Plant Extracts/chemistryABSTRACT
Bone is a mineralized tissue with the intrinsic capacity for constant remodeling. Rapid prototyping techniques, using biomaterials that mimic the bone native matrix, have been used to develop osteoinductive and osteogenic personalized 3D structures, which can be further combined with drug delivery and phototherapy. Herein, a Fab@Home 3D Plotter printer was used to promote the layer-by-layer deposition of a composite mixture of gelatin, chitosan, tricalcium phosphate, and reduced graphene oxide (rGO). The phototherapeutic potential of the new NIR-responsive 3D_rGO scaffolds was assessed by comparing scaffolds with different rGO concentrations (1, 2, and 4 mg/mL). The data obtained show that the rGO incorporation confers to the scaffolds the capacity to interact with NIR light and induce a hyperthermy effect, with a maximum temperature increase of 16.7 °C after under NIR irradiation (10 min). Also, the increase in the rGO content improved the hydrophilicity and mechanical resistance of the scaffolds, particularly in the 3D_rGO4. Furthermore, the rGO could confer an NIR-triggered antibacterial effect to the 3D scaffolds, without compromising the osteoblasts' proliferation and viability. In general, the obtained data support the development of 3D_rGO for being applied as temporary scaffolds supporting the new bone tissue formation and avoiding the establishment of bacterial infections.
Subject(s)
Calcium Phosphates , Chitosan , Graphite , Tissue Scaffolds/chemistry , Chitosan/chemistry , Gelatin/chemistry , Bone Regeneration , Graphite/pharmacology , Graphite/chemistry , Tissue Engineering/methodsABSTRACT
There are no Food and Drug Administration-approved drugs for treating noise-induced hearing loss (NIHL), reflecting the absence of clear specific therapeutic targets and effective delivery strategies. Noise trauma is demonstrated results in nicotinamide adenine dinucleotide (NAD+) downregulation and mitochondrial dysfunction in cochlear hair cells (HCs) and spiral ganglion neurons (SGNs) in mice, and NAD+ boosted by nicotinamide (NAM) supplementation maintains cochlear mitochondrial homeostasis and prevents neuroexcitatory toxic injury in vitro and ex vivo, also significantly ameliorated NIHL in vivo. To tackle the limited drug delivery efficiency due to sophisticated anatomical barriers and unique clearance pathway in ear, personalized NAM-encapsulated porous gelatin methacryloyl (PGMA@NAM) are developed based on anatomy topography of murine temporal bone by micro-computed tomography and reconstruction of round window (RW) niche, realizing hydrogel in situ implantation completely, NAM sustained-release and long-term auditory preservation in mice. This study strongly supports personalized PGMA@NAM as NIHL protection drug with effective inner ear delivery, providing new inspiration for drug-based treatment of NIHL.
Subject(s)
Gelatin , Hearing Loss, Noise-Induced , Methacrylates , Mice , Animals , Hearing Loss, Noise-Induced/drug therapy , Hearing Loss, Noise-Induced/prevention & control , Niacinamide/therapeutic use , NAD , Delayed-Action Preparations/therapeutic use , Porosity , X-Ray MicrotomographyABSTRACT
Gastric cancer is the fifth most frequently diagnosed malignant neoplasm and the third leading cause of cancer-related mortality. Nevertheless, the therapeutic efficacy of conventional surgical and chemotherapeutic interventions in clinical practice is often unsatisfactory. Curcumin (Cur) has shown promise as a therapeutic agent in prior studies. However, its progress in this context has been impeded by challenges including low solubility, instability in aqueous environments, and rapid metabolism. In this study, we develop methacrylate fish gelatin (FGMA) hydrogel microparticles (FGMPs@Cur) encapsulating Cur via microfluidic electrospray technology for postoperative comprehensive treatment of gastric cancer. Comprehensive characterizations and analyses were conducted to assess the cytotoxicity against gastric cancer cells and potential tissue reparative effects of FGMPs@Cur. In vitro experiments revealed that FGMPs@Cur exhibited a remarkable cytotoxic effect on nearly 80 % of gastric cancer cells while maintaining at least 95 % viability of normal cells in cell compatibility tests. In vivo results demonstrated that FGMPs@Cur significantly reduced tumor volume to 47 % of the control group, and notable tissue regeneration was observed at the surgical site. These properties indicated that such a hydrogel microparticle system is a promising candidate for postoperative gastric cancer treatment in practical application.
Subject(s)
Curcumin , Nanoparticles , Stomach Neoplasms , Animals , Curcumin/pharmacology , Gelatin , Stomach Neoplasms/drug therapy , Microfluidics , Hydrogels , Cell Line, TumorABSTRACT
Recently, there has been an accelerating interest in novel biocompatible wound dressings made of nano-sized materials, especially nanofibers. Electrospun nanofibers provide high surface area and mimic the extracellular matrix which enhances biocompatibility. Besides, nanofibrous structures have high active ingredient loading capacity as a result of their high surface-to-volume ratio and porosity. In the present study, curcumin-loaded poly(ω-pentadecalactone-co-δ-valerolactone)/gelatin (PDL-VL/Gel) nanofibrous membranes were fabricated to be used for healing skin wounds. Poly(ω-pentadecalactone-co-δ-valerolactone) copolymer has been enzymatically synthesized in previous studies, thus it improves the originality of the membrane. It was aimed to obtain a synergetic effect and increase the novelty of the work by blending synthetic and natural polymers. Moreover, it was preferred to provide antibacterial activity by the incorporation of a herbal ingredient (curcumin) as a natural alternative to commercial antibiotics. Varied amounts of curcumin (5-25 %, w:v) were electrospun together with PDL-VL/Gel (equal volume ratio) polymer blend (fiber diameters ranged between 554 and 1074 nm) and several characterizations (morphological and molecular structure, wettability characteristics, and thermal behavior) were applied to examine the curcumin incorporation. Afterwards, in vitro curcumin release studies were carried out and mathematical modeling was applied to release data to clarify the transport mechanism. Curcumin release profiles comprised of an initial burst release in the first hour followed by a sustained release through 24 h. Based on the antibacterial activity test results, 15 % curcumin loading ratio was found to be sufficient for the treatment of skin wounds infected by Gram-negative (E. coli) and Gram-positive (S. aureus and B. subtilis) bacteria. Additionally, nanofibrous membranes did not lead to cytotoxicity, and curcumin content further enhanced the viability of fibroblasts. Thus, the presented antibacterial nanofibrous membrane is suggested to be applied for the treatment of wound infections and accelerating the healing process.
Subject(s)
Curcumin , Nanofibers , Nanofibers/chemistry , Gelatin/chemistry , Staphylococcus aureus , Curcumin/pharmacology , Curcumin/chemistry , Escherichia coli , Anti-Bacterial Agents/chemistryABSTRACT
Petroleum-based plastics are useful but they pose a great threat to the environment and human health. It is highly desirable yet challenging to develop sustainable structural materials with excellent mechanical and optical properties for plastic replacement. Here, we report a simple and efficient method to manufacture high-performance all-biobased structural materials from cellulosic wood skeleton (WS) and gelatin via oxidation and densification. Specifically, gelatin was grafted to the oxidized cellulose wood skeletons (DAWS) and then physically crosslinked via Tannic acid (TA), resulting in a significant enhancement of the material properties. Notably, only a mild pressure was applied during the drying process to form a densified TA/Gelatin/transparent wood film(TWF). The developed TA/Gelatin/TWF (thickness:100 ± 12 µm) exhibited a desirable combination of high strength (â¼154.59 MPa), light transmittance (86.2 % at 600 nm), low haze (16.7 %), high water stability (wet strength: â¼130.13 MPa) and ultraviolet blocking efficacy which surpass most of the petroleum-based plastics. In addition, due to the all bio-based origins (wood and gelatin), TA/Gelatin/TWF are easily biodegradable under natural conditions, leading to less impact on the environment. These findings would hold promises for exploring high-quality all bio-based wood composites as eco-friendly alternatives to substitute plastics with wide applications, e.g. anti-counterfeiting, UV protection, and flexible electricals.