ABSTRACT
It is generally accepted that mineral deficiencies, including magnesium and calcium, are widespread globally. Dietary supplementation may be an effective approach to combat such deficiencies. However, challenges associated with limited mineral solubility in the digestive system can impede effective dissolution and hinder absorption, leading to deficiency, and undesirable gastrointestinal disturbances including diarrhoea. Seawater is considered to be a rich source of bioactive magnesium, calcium, and 72 other trace minerals. In this study, we examine two different marine-derived multimineral products as potential dietary supplements. Aquamin-Mg, sourced from seawater is rich in magnesium (12%), and Aquamin F, a seaweed-derived multimineral is rich in calcium (32%). Both products also contain a diverse array of over 72 minerals, characteristic of their oceanic origin. Our study comprises two experiments. The first experiment evaluates and compares the solubility of Aquamin-Mg, commercially available magnesium bisglycinate, and Pure Magnesium Bisglycinate (PrizMAG) during in vitro digestion using the INFOGEST method. Results demonstrate that Aquamin-Mg exhibits superior solubility than the other magnesium sources during the gastric and intestinal phases, particularly when administered alongside food materials. The second experiment is a randomized, double-blind, placebo-controlled study in a small cohort of healthy older aged adults to assess the tolerability of a combined Aquamin-Mg/Aquamin-F supplement over a 12-week period. The findings indicate that this combination supplement is well-tolerated, with no significant adverse events reported, emphasizing its potential as a means of addressing mineral deficiencies.
Subject(s)
Calcium , Dietary Supplements , Magnesium , Humans , Magnesium/chemistry , Dietary Supplements/analysis , Calcium/chemistry , Calcium/metabolism , Female , Male , Aged , Double-Blind Method , Solubility , Seawater/chemistry , Digestion , Middle Aged , Biological Availability , Seaweed/chemistry , Adult , MineralsABSTRACT
To improve the retention and slow-release abilities of nitrogen (N) and phosphorus (P), an 82 %-purity struvite fertilizer (MAP-BC) was synthesized using magnesium-modified biochar and a solution with a 2:1 concentration ratio of NH4+ to PO43- at a pH of 8. Batch microscopic characterizations and soil column leaching experiments were conducted to study the retention and slow-release mechanisms and desorption kinetics of MAP-BC. The slow-release mechanism revealed that the dissolution rate of high-purity struvite was the dominant factor of NP slow release. The re-adsorption of NH4+ and PO43- by biochar and unconsumed MgO prolonged slow release. Mg2+ ionized by MgO could react with PO43- released from struvite to form Mg3(PO4)2. The internal biochar exhibited electrostatic attraction and pore restriction towards NH4+, while magnesium modification and nutrient loading formed a physical antioxidant barrier that ensured long-term release. The water diffusion experiment showed a higher cumulative release rate for PO43- compared to NH4+, whereas in soil column leaching, the trend was reversed, suggesting that soil's competitive adsorption facilitated the desorption of NH4+ from MAP-BC. During soil leaching, cumulative release rates of NH4+ and PO43- from chemical fertilizers were 3.55-3.62 times faster than those from MAP-BC. The dynamic test data for NH4+ and PO43- in MAP-BC fitted the Ritger-Peppas model best, predicting release periods of 163 days and 166 days, respectively. The leaching performances showed that MAP-BC reduced leaching solution volume by 5.58 % and significantly increased soil large aggregates content larger than 0.25 mm by 24.25 %. The soil nutrients retention and pH regulation by MAP-BC reduced leaching concentrations of NP. Furthermore, MAP-BC significantly enhanced plant growth, and it is more suitable as a NP source for long-term crops. Therefore, MAP-BC is expected to function as a long-term and slow-release fertilizer with the potential to minimize NP nutrient loss and replace part of quick-acting fertilizer.
Subject(s)
Fertilizers , Magnesium , Struvite/chemistry , Magnesium/chemistry , Fertilizers/analysis , Magnesium Oxide , Phosphorus/chemistry , Charcoal/chemistry , Soil/chemistry , Nitrogen/analysisABSTRACT
Magnesium (Mg) alloys have attracted attention as biodegradable metals, but the details of their corrosion behavior under biological environment have not been elucidated. Previous studies have suggested that diffusion through blood flow may influence Mg corrosion. Therefore, to understand the degradation behaviors of Mg, we analyzed insoluble salt precipitation associated with Mg corrosion in model tissue with different diffusion rates. A pure Mg specimen was immersed into a model tissue prepared with cell culture medium supplemented by a thickener at a different concentration (0.2%-0.5%) to form the gel. Micro-focus x-ray computed tomography of the gel was performed to observe gas cavity formation around the specimen. The insoluble salt layer formed on the specimen surface were analyzed by scanning electron microscopy with energy-dispersive x-ray spectroscopy, and Raman spectroscopy. As results, gas cavity formation was observed for all specimens. At day 7, the gas cavity volume was the highest at 0.5% thickener gel followed by 0.3% thickener gel. The insoluble salts were classified into three types based on their morphology; plate-like, granular-like, and crater-like salts. The crater-like salts were observed to cover 16.8 ± 3.9% of the specimen surface immersed in the 0.5% thickener gel, at the specimen area contacted to the gas cavity. The crater-like salts were composed by Mg hydroxide and carbonate from the deepest to the top layer. In plate-like or granular-like salts, Mg carbonate was formed in the deepest layer, but phosphates and carbonates, mainly containing calcium not Mg, were formed on the surface layer. In conclusion, the increase in the thickener concentration increased the gas cavity volume contacting to the specimen surface, resulting in the increase in precipitation of Mg hydroxide and carbonate, composing crater-like salts. Mg hydroxide and carbonate precipitation suggests the local increase in OH-concentration, which may be attributed to the decrease in diffusion rate.
Subject(s)
Magnesium , Salts , Corrosion , Magnesium/chemistry , Carbonates , Hydroxides , Alloys/chemistryABSTRACT
Magnetic magnesium (Mg)-loaded Chinese herbal medicine residues (MM-TCMRs) were fabricated to simultaneously remove and recover phosphate and ammonium from wastewater. The MM-TCMRs exhibited larger specific surfaces and rougher structures with massive spherical particles than those of original residues. They could be separated by adjusting the magnetic field. The phosphate and ammonium adsorption by MM-TCMRs were matched with the pseudo-second-order model, while the Langmuir model yielded the maximum adsorption capacities of 635.35 and 615.57 mg g-1, respectively. Struvite precipitation on the MM-TCMRs surface was the primary removal mechanism with electrostatic attraction, ligand exchange, intra-particle diffusion, and ion exchange also involved. The recyclability of MM-TCMRs confirmed their good structural stability. More importantly, the nutrient-loaded MM-TCMRs enhanced alfalfa growth and improved soil fertility in planting experiments. Collectively, the MM-TCMRs are promising candidates for nutrient removal and recovery from wastewater.
Subject(s)
Ammonium Compounds , Drugs, Chinese Herbal , Animals , Swine , Phosphates/chemistry , Wastewater , Magnesium/chemistry , Struvite , Adsorption , Magnetic PhenomenaABSTRACT
Objective: Garlic can help humans ensure healthy lives and promote well-being for all at all ages by sufficient zinc and magnesium intake.Method: Serpentine treated it by microwaving and sintering to enhance its crystallinity as well as its magnesium and zinc ion release rates. Furthermore, an enriched garlic enzyme extract had an approximately 8-fold increase in alliinase activity. Results: Strong bonding was observed for the microwaved and sintered powders, but also facilitated zinc ion reactions and reduced lattice defects. Accordingly, used for the garlic growth and enzyme experiments.Conclusions: (1) The sintered powder excellent magnesium and zinc ion release capability. (2) The enriched garlic enzymes had high alliinase activity, likely increasing the health benefits of the garlic.
Subject(s)
Garlic , Magnesium , Zinc , Garlic/chemistry , Zinc/chemistry , Zinc/pharmacology , Zinc/administration & dosage , Magnesium/chemistry , Magnesium/pharmacology , Humans , Carbon-Sulfur Lyases/metabolism , PowdersABSTRACT
The utilization of guided tissue regeneration membranes is a significant approach for enhancing bone tissue growth in areas with bone defects. Biodegradable magnesium alloys are increasingly being used as guided tissue regeneration membranes due to their outstanding osteogenic properties. However, the degradation rates of magnesium alloy bone implants documented in the literature tend to be rapid. Moreover, many studies focus only on the initial 3-month period post-implantation, limiting their applicability and impeding clinical adoption. Furthermore, scant attention has been given to the interplay between the degradation of magnesium alloy implants and the adjacent tissues. To address these gaps, this study employs a well-studied magnesium-aluminum (Mg-Al) alloy membrane with a slow degradation rate. This membrane is implanted into rat skull bone defects and monitored over an extended period of up to 48 weeks. Observations are conducted at various intervals (2, 4, 8, 12, 24, and 48 weeks) following the implantation. Assessment of degradation behavior and tissue regeneration response is carried out using histological sections, micro-CT scans, and scanning electron microscopy (SEM). The findings reveal that the magnesium alloy membranes demonstrate remarkable biocompatibility and osteogenic capability over the entire observation duration. Specifically, the Mg-Al alloy membranes sustain their structural integrity for 8 weeks. Notably, their osteogenic ability is further enhanced as a corrosion product layer forms during the later stages of implantation. Additionally, our in vitro experiments employing extracts from the magnesium alloy display a significant osteogenic effect, accompanied by a notable increase in the expression of osteogenic-related genes. Collectively, these results strongly indicate the substantial potential of Mg-Al alloy membranes in the context of guided tissue regeneration.
Subject(s)
Alloys , Magnesium , Rats , Animals , Alloys/pharmacology , Alloys/chemistry , Magnesium/pharmacology , Magnesium/chemistry , Aluminum/pharmacology , Bone Regeneration , OsteogenesisABSTRACT
Medicinal plants play a vital role in herbal medical field and allopathic medicine field industry. Chemical and spectroscopic studies of Taraxacum officinale, Hyoscyamus niger, Ajuga bracteosa, Elaeagnus angustifolia, Camellia sinensis, and Berberis lyceum are conducted in this paper by using a 532-nm Nd:YAG laser in an open air environment. These medicinal plant's leaves, roots, seed, and flowers are used to treat a range of diseases by the locals. It is crucial to be able to distinguish between beneficial and detrimental metal elements in these plants. We demonstrated how various elements are categorized and how roots, leaves, seeds and flowers of same plants differ from each other on the basis of elemental analysis. Furthermore, for classification purpose, different classification models, partial least square discriminant analysis (PLS-DA), k-nearest neighbors (kNN), and principal component analysis (PCA) are used. We found silicon (Si), aluminum (Al), iron (Fe), copper (Cu), calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), manganese (Mn), phosphorous (P), and vanadium (V) in all of the medicinal plant samples with a molecular form of carbon and nitrogen band. We detected Ca, Mg, Si, and P as primary components in all of the plant samples, as well as V, Fe, Mn, Al, and Ti as essential medicinal metals, and additional trace elements like Si, Sr, and Al. The result's findings show that the PLS-DA classification model with single normal variate (SNV) preprocessing method is the most effective classification model for different types of plant samples. The average correct classification rate obtained for PLS-DA with SNV is 95%. Moreover, laser-induced breakdown spectroscopy (LIBS) was successfully employed to perform rapid, sensitive, and quantitative trace element analysis on medicinal herbs and plant samples.
Subject(s)
Lasers, Solid-State , Plants, Medicinal , Trace Elements , Plants, Medicinal/chemistry , Chemometrics , Spectrum Analysis/methods , Trace Elements/analysis , Magnesium/analysis , Magnesium/chemistry , Calcium/analysis , SodiumABSTRACT
Struvite precipitation is a well-known technology to recover and upcycle phosphorus from municipal wastewater as a slow-release fertiliser. However, the economic and environmental costs of struvite precipitation are constrained by using technical-grade reagents as a magnesium source. This research evaluates the feasibility of using a low-grade magnesium oxide (LG-MgO) by-product from the calcination of magnesite as a magnesium source to precipitate struvite from anaerobic digestion supernatants in wastewater treatment plants. Three distinct LG-MgOs were used in this research to capture the inherent variability of this by-product. The MgO content of the LG-MgOs varied from 42 % to 56 %, which governed the reactivity of the by-product. Experimental results showed that dosing LG-MgO at P:Mg molar ratio close to stoichiometry (i.e. 1:1 and 1:2) favoured struvite precipitation, whereas higher molar ratios (i.e. 1:4, 1:6 and 1:8) favoured calcium phosphate precipitation due to the higher calcium concentration and pH. At a P:Mg molar ratio of 1:1 and 1:2, the percentage of phosphate precipitated was 53-72 % and 89-97 %, respectively, depending on the LG-MgO reactivity. A final experiment was performed to examine the composition and morphology of the precipitate obtained under the most favourable conditions, which showed that (i) struvite was the mineral phase with the highest peaks intensity and (ii) struvite was present in two different shapes: hopper and polyhedral. Overall, this research has demonstrated that LG-MgO is an efficient source of magnesium for struvite precipitation, which fits the circular economy principles by valorising an industrial by-product, reducing the pressure on natural resources, and developing a more sustainable technology for phosphorus recovery.
Subject(s)
Magnesium Oxide , Water Purification , Struvite/chemistry , Magnesium Oxide/chemistry , Magnesium/chemistry , Magnesium Compounds/chemistry , Anaerobiosis , Phosphates/chemistry , Phosphorus/chemistry , Chemical Precipitation , Waste Disposal, Fluid/methodsABSTRACT
The ever-growing contamination of surface water due to various catchment activities poses threats and stress to downstream water treatment entities. Specifically, the presence of ammonia, microbial contaminants, organic matter, and heavy metals has been an issue of paramount concern to water treatment entities since stringent regulatory frameworks require these pollutants to be removed prior to water consumption. Herein, a hybrid approach that integrates struvite crystallization (precipitation) and breakpoint chlorination (stripping) for the removal of ammonia from aqueous solution was evaluated. To fulfil the goals of this study, batch experimental studies were pursued through the adoption of the well-known one-factor-at-a-time (AFAAT) method, specifically the effects of time, concentration/dosage, and mixing speed. The fate of chemical species was underpinned using the state-of-the-art analytical instruments and accredited standard methods. Cryptocrystalline magnesium oxide nanoparticles (MgO-NPs) were used as the magnesium source while the high-test hypochlorite (HTH) was used as the source of chlorine. From the experimental results, the optimum conditions were observed to be, i.e., Stage 1 - struvite synthesis, 110 mg/L of Mg and P dosage (concentration), 150 rpm of mixing speed, 60 min of contact time, and lastly, 120 min of sedimentation while optimum condition for the breakpoint chlorination (Stage 2) were 30 min of mixing and 8:1 Cl2:NH3 weight ratio. Specifically, in Stage 1, i.e., MgO-NPs, the pH increased from 6.7 to ≥9.6, while the turbidity was reduced from 9.1 to ≤1.3 NTU. Mn removal efficacy attained ≥97.70% (reduced from 174 µg/L to 4 µg/L) and Fe attained ≥96.64% (reduced from 11 mg/L to 0.37 mg/L). Elevated pH also led to the deactivation of bacteria. In Stage 2, i.e. breakpoint chlorination, the product water was further polished by eliminating residual ammonia and TPC at 8:1 Cl2-NH3 weight ratio. Interestingly, ammonia was reduced from 6.51 to 2.1 mg/L in Stage 1 (67.74% removal) and then from 2.1 to 0.002 mg/L post breakpoint chlorination (99.96% removal), i.e., stage 2. Overall, synergistic and complementary effects of integrating struvite synthesis and breakpoint chlorination hold great promise for the removal of ammonia from aqueous solutions thus confirming that this technology could potentially be used to curtail the effects of ammonia in the receiving environments and drinking water.
Subject(s)
Ammonia , Water Pollutants, Chemical , Struvite/chemistry , Ammonia/chemistry , Halogenation , Magnesium Oxide , Magnesium/chemistry , Phosphates/chemistry , Water Pollutants, Chemical/chemistryABSTRACT
Diminishing phosphorus resources worldwide requires developing new technologies to recover phosphorus (P) from wastewaters. A lab-scale electrolytic reactor with a magnesium anode was investigated to remove NH4+ and PO43- from synthetic wastewater by producing struvite. The effects of mixing speed, pH, and applied current on struvite yield, NH4+, and PO43- removal efficiencies were first evaluated using a factorial design. Then, the two most significant parameters were further optimized using Central Composite Design (CCD) coupled with Response Surface Methodology (RSM). The struvite was characterized by SEM, XRD, and FT-IR. A 5.7-fold increase in struvite yield was achieved by increasing the applied current from 0.1 to 0.5 A. The three regression equations generated by the CCD/RSM design with applied current and mixing speed as the two independent parameters were highly correlated with the response variables (struvite yield, NH4+ and PO43- removal efficiencies). The desirability analysis showed the best operating condition: current, 0.5 A and mixing speed, 414 rpm, for the reactor system, under which the optimal struvite yield and NH4+ and PO43- removal efficiencies were 4.75 g/L, 93.0%, and 58.4%, respectively. The SEM, XRD, and FT-IR analyses confirmed the high purity and quality of the struvite produced by the electrolytic reactor system.
Subject(s)
Magnesium , Wastewater , Struvite/chemistry , Magnesium/chemistry , Spectroscopy, Fourier Transform Infrared , Phosphorus/chemistry , Electrodes , Phosphates/chemistryABSTRACT
Nesquehonite is a magnesium carbonate mineral relevant to carbon sequestration envisioned for carbon capture and storage of CO2 . Its chemical formula remains controversial today, assigned as either a hydrated magnesium carbonate [MgCO3 â 3H2 O], or a hydroxy- hydrated- magnesium bicarbonate [Mg(HCO3 )OH â 2H2 O]. The resolution of this controversy is central to understanding this material's thermodynamic, phase, and chemical behavior. In an NMR crystallography study, using rotational-echo double-resonance 13 C{1 H} (REDOR), 13 C-1 H distances are determined with precision, and the combination of 13 C static NMR lineshapes and density functional theory (DFT) calculations are used to model different H atomic coordinates. [MgCO3 â 3H2 O] is found to be accurate, and evidence from neutron powder diffraction bolsters these assignments. Refined H positions can help understand how H-bonding stabilizes this structure against dehydration to MgCO3 . More broadly, these results illustrate the power of NMR crystallography as a technique for resolving questions where X-ray diffraction is inconclusive.
Subject(s)
Magnesium , Neutron Diffraction , Magnesium/chemistry , Crystallography , Minerals/chemistry , Crystallography, X-RayABSTRACT
RNA polymerase II (Pol II) incorporates complementary ribonucleotides into the growing RNA chain one at a time via the nucleotide addition cycle. The nucleotide addition cycle, however, is prone to misincorporation of noncomplementary nucleotides. Thus, to ensure transcriptional fidelity, Pol II backtracks and then cleaves the misincorporated nucleotides. These two reverse reactions, nucleotide addition and cleavage, are catalyzed in the same active site of Pol II, which is different from DNA polymerases or other endonucleases. Recently, substantial progress has been made to understand how Pol II effectively performs its dual role in the same active site. Our review highlights these recent studies and provides an overall model of the catalytic mechanisms of Pol II. In particular, RNA extension follows the two-metal-ion mechanism, and several Pol II residues play important roles to facilitate the catalysis. In sharp contrast, the cleavage reaction is independent of any Pol II residues. Interestingly, Pol II relies on its residues to recognize the misincorporated nucleotides during the backtracking process, prior to cleavage. In this way, Pol II efficiently compartmentalizes its two distinct catalytic functions using the same active site. Lastly, we also discuss a new perspective on the potential third Mg2+ in the nucleotide addition and intrinsic cleavage reactions.
Subject(s)
Nucleotides , RNA Polymerase II , Catalysis , Catalytic Domain , Nucleotides/chemistry , RNA , RNA Polymerase II/metabolism , Magnesium/chemistryABSTRACT
Phosphorus recovery from digestate is considered a challenge because the possible discharge can lead to eutrophication. This study focuses on phosphorus recovery as struvite from the liquid fraction of swine manure digestate at a high total solids concentration, by using a lab-scale crystallizer operated in continuous mode (7 L·d-1). A by-product of salt production (seawater bittern, SWB) was assessed as Mg source for the formation of struvite instead of a chemical dosage (MgCl2) within a circular economy approach. Different Mg/P (1.8:1; 2:1; 3:1) ratios and different TS contents (TS 3.5 and 4.5 %) were studied. The maximum P recovery of 85 % and N recovery of 52 % was obtained at 4.5 % of TS and Mg/P ratio of 2:1, corresponding to an overall P and N recovery on the raw digestate of 70 % and 46 %, respectively. The presence of struvite was confirmed by X-ray diffraction (XRD) and scanning electron microscopy (SEM-EDS). Dried samples were then used as fertilizer in agronomic pot tests using Brassica rapa chinensis. Struvite obtained, showed comparable fertilizing properties in comparison with conventional fertilizers in terms of P (Mineral 5.6 ± 0.4; Poultry 5.7 ± 0.2; Struvite 5.9 ± 0.1 g kg-1), N and total biomass content such as chlorophylls ratio. The growth tests confirmed the possible use of struvite recovered as competitive alternative to conventional chemical phosphate fertilizers. The results showed that it can be possible to promote sustainable P recovery from high solids digestates by the combination of crystallizer reactor and Mg-salt byproducts.
Subject(s)
Magnesium , Phosphorus , Swine , Animals , Phosphorus/chemistry , Struvite/chemistry , Magnesium/chemistry , Fertilizers , Seawater/chemistryABSTRACT
Phosphorus recovery is indispensable due to the rapid depletion of its natural reserves and excessive utility in agriculture. Though human urine has high nutrient content including phosphate, nitrogen and potassium; direct use as a fertilizer is restricted due to hygienic, environmental, social and ethical issues. To overcome these limitations, the nutrients are precipitated by the external addition of magnesium (Mg) to form a slow-releasing fertilizer called struvite. The present study aims to maximize phosphate recovery through optimizing struvite production by an emerging electrocoagulation technique. A maximum of 95% phosphate recovery was achieved using inter-electrode distance of 0.5 cm, 2 A current from undiluted urine using Mg-Mg electrodes in a reaction time of 30 min. Further, kinetic modeling of phosphate recovery through electrocoagulation was conducted to comprehend the intended mechanism through the order of kinetics. The results revealed that the data best correlated with first-order kinetics with a correlation coefficient of 0.95. Electrocoagulation improved the supernatant quality by reducing the ion concentrations other than phosphate (30-50%), salinity (40-45%), and microbial population (99%). Qualitative assessment of the precipitate through sophisticated analysis further confirmed the presence of struvite crystals.
Subject(s)
Fertilizers , Phosphates , Humans , Phosphates/chemistry , Struvite/chemistry , Fertilizers/analysis , Kinetics , Phosphorus/analysis , Magnesium/chemistry , Electrocoagulation , Urine/chemistryABSTRACT
The phase width of the copper hydroxycarbonate malachite, Cu2CO3(OH)2, upon substitution with magnesium has been studied in detail. In extension of a previous study on amorphous precursors, the introduction of a hydrothermal aging step allowed the retrieval of crystalline hydroxycarbonate samples with up to 37 atom % Mg (metal content) that are suitable candidates as precursors to Cu/MgO catalysts for CO hydrogenation. Simultaneous refinements of X-ray powder diffraction and pair distribution function (PDF) data as well as complementary spectroscopic insight (X-ray absorption and infrared spectroscopy) revealed that samples with up to 18 atom % Mg are phase-pure magnesian malachites but the magnesium content can be increased beyond this threshold when mcguinnessite (CuMgCO3(OH)2) is accepted as a side phase. In a complementary study, a continuous increase of the magnesium fraction was found during aging and the corresponding structural evolution was studied by means of PDF. These findings add significant insight into the aging chemistry of crystalline Cu,Mg hydroxycarbonates. Furthermore, both phase-pure magnesian malachite and mcguinnessite-containing samples with up to 37 atom % Mg have been examined by thermogravimetry, X-ray powder diffraction, and N2 physisorption and were found to be promising candidates for use as precursors for the preparation of Cu/MgO catalysts.
Subject(s)
Copper , Organometallic Compounds , Copper/chemistry , Magnesium/chemistry , X-Ray Diffraction , Magnesium Oxide , Spectrophotometry, InfraredABSTRACT
Developing sustainable materials for recovering and recycling nutrients from wastewater is critically needed for nutrients such as phosphorus that have a diminishing supply. Struvite crystallization is emerging as a promising strategy for phosphorus recovery which can be enhanced with seeding through microalgal biochar. The main bottleneck of using microalgae is its high harvesting cost. In this study, an integrated electrocoagulation-flotation (ECF) process is used to recover and at the same time modify the algal surface with magnesium anode and inert carbon cathode. Harvesting efficiency of 98% was achieved with 40.78 mA cm-2, 0.5 cm inter-electrode distance and energy consumption of 4.03 kWh kg-1 in 15 min. The harvested microalgae were pyrolyzed to obtain a yield of 52.90% Mg-laden microalgal biochar. Simultaneously, surface impregnation of 28% magnesium was attained as confirmed by Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Phosphorus recovery and struvite yield of 93.70% and 2.66 g L-1, respectively, were obtained from dosing 1.50 g L-1 Mg-laden microalgal biochar. Comparison of physicochemical characteristics of residual supernatant after microalgal harvesting and struvite recovery showed that the combined use of both the residuals can serve as a sustainable growth medium for microalgae. The overall operating cost of the integrated process was found to be 2.48 USD kg-1 with a total energy consumption of 10.76 kWh kg-1, which was found to be lower than conventional harvesting unit processes such as centrifugation and filtration. This novel approach can help attaining a circular bioeconomy by encompassing nutrient recovery and waste management in an integrated process.
Subject(s)
Microalgae , Charcoal , Crystallization , Electrocoagulation , Magnesium/chemistry , Phosphorus , Struvite/chemistryABSTRACT
Recovery of phosphorus from wastewater through struvite crystallization is one of the most attractive methods. However, the cost of chemical consumption makes this technology is unattractive to some extent. In this work, highly active serpentine was prepared by one-step mechanical activation and then used to recover phosphate as struvite from the black water containing 132.8 mg/L phosphorus and 3144 mg/L ammonia nitrogen. The results indicated that the prepared active serpentine can release magnesium ions and hydroxide ions simultaneously into an aqueous solution and is an ideal raw material for struvite crystallization. The factors for phosphorus recovery in this process mainly include mechanical activation intensity, serpentine dosage, and contact time. For the actual black water, a high recovery rate of phosphorus (>98%) is achieved by using active serpentine as the magnesium and alkali source for struvite precipitation. The recovery product was identified as struvite with a median particle size of 32.96 µm. It was confirmed that the mechanical activation damaged the crystal structure of the raw serpentine, improving the activity of Mg2+ and OH-. The undissolved Si-containing particles act as crystal seeds, accelerating the struvite crystallization process. Furthermore, a pilot-scale test was conducted with a rural public toilet in Xiong'an New District, Hebei Province. The results showed that an acceptable phosphorus recovery (98%) could be achieved using active serpentine. Additionally, it was demonstrated that the serpentine process to recover phosphate as struvite reduced the cost by 54.4% in compared with an ordinary chemical process. The active serpentine is a promising dual source of magnesium and alkali for the phosphorus recovery by the struvite method. It has a potential prospect for the large-scale application in phosphorus recovery and struvite fertilizer production.
Subject(s)
Magnesium , Phosphorus , Crystallization , Magnesium/chemistry , Magnesium Compounds/chemistry , Phosphates/chemistry , Phosphorus/chemistry , Struvite/chemistry , Wastewater/chemistry , WaterABSTRACT
Struvite (MgNH4PO4·6H2O) crystallization is a promising method of phosphorus recovery from wastewater. As for digestive livestock wastewater, the extensive residues of antibiotics could induce struvite recovery to spread antibiotic resistance and thereafter pose ecological risks to the environment. In this study, struvite crystals with different morphologies were produced from synthetic swine wastewater, and tetracyclines (TCs) adsorbing capacities were investigated. The important factors, including the existence of Mg2+ ions and initial TCs concentration, were examined. The predominant adsorption between TCs and struvite crystals was electrostatic interaction, with the maximum capacity at doxycycline (DXC) 876.5 µg/Kg, oxytetracycline (OTC) 1946.7 µg/Kg and tetracycline (TC) 2376.2 µg/Kg, respectively. Well-faceted struvite crystallites possessed high adsorption capacities than those of dendritic crystallite, due to higher Mg intensities on the crystallite surface. The increment of phosphorus concentration could trigger the transformation of struvite morphology from needle to dendritic shapes with X-shape as an intermediate stage, which would reduce Mg density in specific crystallite facets and therefore limit TCs adsorption onto struvite crystals. The existence of Mg2+ ion would inhibit TCs deprotonation and thereafter improve TCs adsorption onto struvite crystals. Further investigation revealed that continuously elevating initial TCs concentration would promote the formation of 1:2 transferring to 1:1 TCs-Mg chelates, which would result in a fluctuation following a drastic augment of TCs adsorption capacity.
Subject(s)
Tetracyclines , Wastewater , Animals , Anti-Bacterial Agents , Crystallization/methods , Ions , Magnesium/chemistry , Phosphates/chemistry , Phosphorus/chemistry , Struvite/chemistry , Swine , Tetracyclines/analysis , Wastewater/chemistryABSTRACT
Accurate knowledge of RNA hybridization is essential for understanding RNA structure and function. Here we mechanically unzip and rezip a 2-kbp RNA hairpin and derive the 10 nearest-neighbor base pair (NNBP) RNA free energies in sodium and magnesium with 0.1 kcal/mol precision using optical tweezers. Notably, force-distance curves (FDCs) exhibit strong irreversible effects with hysteresis and several intermediates, precluding the extraction of the NNBP energies with currently available methods. The combination of a suitable RNA synthesis with a tailored pulling protocol allowed us to obtain the fully reversible FDCs necessary to derive the NNBP energies. We demonstrate the equivalence of sodium and magnesium free-energy salt corrections at the level of individual NNBP. To characterize the irreversibility of the unzipping-rezipping process, we introduce a barrier energy landscape of the stem-loop structures forming along the complementary strands, which compete against the formation of the native hairpin. This landscape correlates with the hysteresis observed along the FDCs. RNA sequence analysis shows that base stacking and base pairing stabilize the stem-loops that kinetically trap the long-lived intermediates observed in the FDC. Stem-loops formation appears as a general mechanism to explain a wide range of behaviors observed in RNA folding.
Subject(s)
Nucleic Acid Conformation , RNA Folding , Biomechanical Phenomena , Magnesium/chemistry , RNA/chemistry , Sodium/chemistry , ThermodynamicsABSTRACT
BACKGROUND: The pH adjustment of acidic red soils with lime materials is beneficial for the reduction of phosphorus (P) fixation. However, the reasons for varying levels of P activation after adding different lime materials have not been fully investigated. Therefore, this study examined changes in soil labile P and P forms after phosphate application to calcium carbonate (CaCO3 ) and dolomite amended red soil during a 120-day incubation period. Also change of P sorption properties in the amended soil samples from day 120 were examined through a sorption-desorption experiment. RESULTS: The increase of soil H2 O-P and NaHCO3 -P in the CaCO3 and dolomite amended soil treatments was mainly ascribed to the decline of the NaOH-P. However, when compared with the control treatment after 120 days, soil Olsen-P significantly increased by 34% and 66% in the CaCO3 and dolomite treatments. The Hedley P fractionation results demonstrated that the CaCO3 application caused a notable increase of HCl-P (stable Ca-P), which was 88.4% higher than that in the dolomite treatment. However, the formation of stable P was strongly suppressed in the dolomite treatment due to the presence of magnesium (Mg), which was identified by the negative relationship between M3-Mg and HCl-P. In line with these findings, P sorption-desorption work showed weaker P binding energy in the dolomite treatment relative to the CaCO3 treatment. CONCLUSION: In terms of increasing P availability in red soil, this study suggests that dolomite should be used to substitute CaCO3 in order to reduce the soil P fixation. © 2021 Society of Chemical Industry.