Antibacterial and self-healing sepiolite-based hybrid hydrogel for hemostasis and wound healing.

The process of wound healing necessitates a specific environment, thus prompting extensive research into the utilization of hydrogels for this purpose. While numerous hydrogel structures have been investigated, the discovery of a self-healing hydrogel possessing favorable biocompatibility, exceptional mechanical properties, and effective hemostatic and antibacterial performance remains uncommon. In this work, a polyvinyl alcohol (PVA) hybrid hydrogel was meticulously designed through a simple reaction, wherein CuxO anchored sepiolite was incorporated into the hydrogel. The results indicate that introduction of sepiolite greatly improves the toughness, self-healing and adhesion properties of the PVA hydrogels. CuxO nanoparticles endow the hydrogels with excellent antibacterial performance towards Staphylococcus aureus and Escherichia coli. The application of hybrid hydrogels for fast hemostasis and wound healing are verified in vitro and in vivo with rat experiments. This work thereby demonstrates an effective strategy for designing biodegradable hemostatic and wound healing materials.

Efficient removal of phosphorus and nitrogen from aquatic environment using sepiolite-MgO nanocomposites: preparation, characterization, removal performance, and mechanism.

Excessive phosphorus will lead to eutrophication in aquatic environment; the efficient removal of phosphorus is crucial for wastewater engineering and surface water management. This study aimed to fabricate a nanorod-like sepiolite-supported MgO (S-MgO) nanocomposite with high specific surface area for efficient phosphate removal using a facile microwave-assisted method and calcining processes. The impact of solution pH, adsorbent dosage, contact time, initial phosphate concentrations, Ca2+ addition, and N/P ratio on the phosphate removal was extensively examined by the batch experiments. The findings demonstrated that the S-MgO nanocomposite exhibited effective removal performance for low-level phosphate (0 ~ 2.0 mM) within the pH range of 3.0 ~ 10.0. Additionally, the nanocomposite can synchronously remove phosphate and ammonium in high-level nutrient conditions (> 2.0 mM), with the maximum removal capacities of 188.49 mg P/g and 89.78 mg N/g. Quantitative and qualitative analyses confirmed the successful harvesting of struvite in effluent with high-phosphate concentrations, with the mechanisms involved attributed to a synergistic combination of sorption and struvite crystallization. Due to its proficient phosphate removal efficiency, cost-effectiveness, and substantial removal capacity, the developed S-MgO nanocomposite exhibits promising potential for application in phosphorus removal from aquatic environments.

Sustainable removal of uranium from acidic wastewater using various mineral raw materials.

Various types of plutonic and volcanic rocks and their alteration products from Greece (serpentinite, magnesite and andesite), have been used for sustainable removal of Uranium (U) from the acidic drainage of Kirki mine, as well as for the pH increase of the polluted solutions. In this light, this study aims at the further understanding and improvement of the ecofriendly reuse of sterile, natural raw materials (including those remaining through industrial processing and engineering testing of aggregate rocks), for remediation of acid mine drainage. The selected rocks constitute such residues of sterile materials were used as filters in experimental continuous flow devices in the form of batch-type columns, in order to investigate acidic remediation properties with special focus on U removal. The initial pH of the wastewater was 2.90 and increased after seven (7) days of experimental application and more specifically from the fourth day onwards. Uranium removal became quantitatively significant once pH reached the value of 5.09. The volcanic rocks appeared to be more effective for U removal than the plutonic ones because of microtextural differences. However, optimum U removal was mainly achieved by serpentinite: while the raw materials rich in Mg strongly reacted and remediated the pH of the drainage water waste. Furthermore, the increase of pH values due to the presence of mineral raw materials, provided increased oxidation potential which deactivated the toxic load of metals, particularly U. Consequently, batch-type serpentinite reaction with the tailing fluid caused a drop in U concentration from an initial value of 254 ppb to the one of 8 ppb, which corresponds to 97% of removal. Andesite presented the second best reactant for experimental remediation, especially when it was mixed with magnetically separated mineral fractions. Despite the fact that the proposed methodology is currently at a relatively low Technology Readiness Level (TRL), it carries the potential to become an extremely effective and low-cost alternative to conventional environmental restoration technologies.

Calcareous Materials Effectively Reduce the Accumulation of Cd in Potatoes in Acidic Cadmium-Contaminated Farmland Soils in Mining Areas.

The in situ chemical immobilization method reduces the activity of heavy metals in soil by adding chemical amendments. It is widely used in farmland soil with moderate and mild heavy metal pollution due to its high efficiency and economy. However, the effects of different materials depend heavily on environmental factors such as soil texture, properties, and pollution levels. Under the influence of lead-zinc ore smelting and soil acidification, Cd is enriched and highly activated in the soils of northwestern Guizhou, China. Potato is an important economic crop in this region, and its absorption of Cd depends on the availability of Cd in the soil and the distribution of Cd within the plant. In this study, pot experiments were used to compare the effects of lime (LM), apatite (AP), calcite (CA), sepiolite (SP), bentonite (BN), and biochar (BC) on Cd accumulation in potatoes. The results showed that the application of LM (0.4%), AP (1.4%), and CA (0.4%) had a positive effect on soil pH and cations, and that they effectively reduced the availability of Cd in the soil. In contrast, the application of SP, BN, and BC had no significant effect on the soil properties and Cd availability. LM, AP, and CA treatment strongly reduced Cd accumulation in the potato tubers by controlling the total 'flux' of Cd into the potato plants. In contrast, the application of SP and BN promoted the migration of Cd from the root to the shoot, while the effect of BC varied by potato genotype. Overall, calcareous materials (LM, CA, and AP) were more applicable in the remediation of Cd-contaminated soils in the study area.

Sepiolite as an effective supplement for low-protein diets with the constant energy-protein ratio in broilers.

The present study aimed to examine the influence of sepiolite on growth performance, meat quality, intestinal health, some blood parameters, and digestibility of nutrients in broilers fed low-protein diets with the constant energy-protein ratio. A total of 252, daily male broiler chicks were allocated to four treatment groups further divided into 9 replicates each containing 7 chicks. Low-protein diets having a constant energy-protein ratio were formulated by lowering protein and energy levels of the control group diet by 5%. Sepiolite was used at the level of 1% in the diets. After 42 days of trial, total feed consumption, total body weight gain, total feed conversion ratio, and carcass yield were not influenced by reducing protein, sepiolite supplementation, and interaction between low-protein-low-energy diet and sepiolite. Reducing protein in the diets led to reducing the digestibility of nutrients, increasing ileal viscosity, decreasing villus height, villus surface area in duodenum and jejunum, and increasing abdominal fat and ether extract, cooking losses, total oxidant status, and oxidative status index in breast meat. Sepiolite supplementation to low-protein diets increased crude protein digestibility, reduced viscosity, increased villus height/crypt depth values and reduced cooking losses, and increased water holding capacity in breast meat. Blood serum biochemical parameters and minerals were not affected by sepiolite supplementation to low-protein diets. Therefore, it is concluded that sepiolite can be added as a beneficial supplement in broiler diets as well as in low-protein diets with a constant energy-protein ratio.

Comparison of litter quality, performance, and some welfare parameters of broilers reared on the sepiolite-supplemented paper waste sludge.

Waste management is the protection of the environment and the health of the population. Paper waste sludge is produced during paper production and sepiolite is a natural clay mineral. The aim of the study was to investigate the usability of sepiolite-added paper waste sludge as a bedding material in the broiler production. Two hundred eighty-eight 1-day old male broiler chicks were divided into the 6 bedding material groups (wood shavings (control), paper waste sludge, sepiolite, mix of 25% paper waste sludge and 75% sepiolite, mix of 50% paper waste sludge and 50% sepiolite, and mix of 75% paper waste sludge and 25% sepiolite) with 6 replicate pens per group. Litter quality, performance, and some welfare parameters of broilers were assessed during the 6 weeks' period. Body weight at 42 days of age and body weight gain from 0 to 42 days of broilers reared on the wood shavings and mix of 50% paper waste sludge and 50% sepiolite were found higher than those of the sepiolite and paper waste sludge groups. Feed consumption and feed to gain ratio from 0 to 42 days, yields of carcass and carcass parts, percentages of organs and abdominal fat, IgG, percentage of bursa Fabricius, burns of foot pad and breast, litter pH and meat properties of broilers reared on the wood shavings, paper waste sludge, and sepiolite litter groups were not found to be statistically different. Litter moisture was found higher in the paper waste sludge group than that in the sepiolite group at the 42 days of rearing. As a conclusion, usage of mix of 50% paper waste sludge and 50% sepiolite as a litter does not have any negative effects on performance, welfare, and litter quality. This result is important in terms of utilizing a waste product.

Silver-sepiolite (Ag-Sep) hybrid reinforced active gelatin/date waste extract (DSWE) blend composite films for food packaging application.

In this study, date syrup waste extract (DSWE) (15 wt%) and different content of silver doped sepiolite hybrid (Ag-Sep, 0.25-3 wt%) were incorporated into gelatin matrix to develop a series of active composite packaging films. Incorporating 2 wt% of Ag-Sep increased the modulus of blend film by 98% compared to unmodified gelatin/DSWE blend film. The active gelatin composite film exhibited superior active compounds migration to aqueous food simulants. Besides, Ag-Sep provided a tortuous pathway to the composite film, resulting in high 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical inhibition efficiency (91%) and slow-release kinetics of active compounds to the food simulant. The Ag-Sep hybrid was improved the antimicrobial property of the gelatin/DSWE blend film against both gram-negative and gram-positive microbes. Thus, this study demonstrated that the Ag-Sep hybrid exhibits significant properties in the active gelatin composite films, implying that this hybrid could be an effective additive for various active packaging films.

Development and characterization of PVA-starch incorporated with coconut shell extract and sepiolite clay as an antioxidant film for active food packaging applications.

An active antioxidant film was fabricated by using polyvinyl alcohol (PVA) and corn starch (ST) and incorporated with and 3, 5, 10, and 20% (v/v) coconut shell extract (CSE) and sepiolite clay (SP) for the first time. The microstructure and physical properties of prepared films were characterized and examined. The addition of sepiolite clay to PVA improved the elongation break 15.57 to 69.24%, and water vapor permeability increased with the addition of CSE. In addition to CSE to films, the antioxidant activity properties of the films were enhanced up to 80%. Further, increasing the amount of CSE slightly affected the color of the active films. The thermal properties of films were enhanced with the addition of CSE and SP. The dispersion of SP in the PVA matrix was affected by an increase in CSE concentration in the PVA matrix. Remarkably, PVA-ST film-based sachets successfully improved the oxidative stability of packaged soybean oil. Our results suggest PVA-ST film containing CSE and sepiolite clay can be utilized as a novel antioxidant packaging material in the food processing industry.

A chitosan-based composite for adsorption of uranyl ions; mechanism, isothems, kinetics and thermodynamics.

The present paper describes a green and cost-effective approach to investigate chitosan-sepiolite (Ch-Sep) composite as an adsorbent for removal of UO22+ ions in aqueous solution. The Ch-Sep composite was prepared as a beads using with two cross-linking agents: tripolyphosphate (TPP) and epichlorohydrin (ECH). Their adsorption properties for the removal of UO22+ ions in aqueous solution by batch experimental conditions were studied. The adsorptive removal processes of UO22+ ions from aqueous solution were evaluated by Langmuir, Freundlich and Dubinin-Radushkevich isotherm models, and was found to be perfectly fit to the Langmuir model (R2 = 0.971). The maximum adsorption capacity was 0.220 mol kg-1 at 25 °C from Langmuir isotherm model. Adsorption energy was 12.1 kJ mol-1 indicating that the adsorption process was chemical. The adsorption kinetics followed the pseudo second order and intra particle diffusion models. The thermodynamics parameters of UO22+ ions removal from aqueous solution was confirmed spontaneous, endothermic and possible at higher temperatures behavior of adsorption process. The adsorption mechanism of UO22+ ions onto Ch-Sep composite beads was investigated by FT-IR and SEM analysis. These findings revealed the effectiveness and potential of the newly synthesized Ch-Sep composite beads for the removal of UO22+ ions.

Treatment of environmental contamination using sepiolite: current approaches and future potential.

To evaluate the potential of sepiolite-based materials to resolve environmental pollution problems, a study is needed which looks at the whole life cycle of material application, including the residual value of material classified as waste from the exploitation of sepiolite deposits in the region or from its processing and purification. This would also maximize value from the exploitation process and provide new potential for local waste management. We review the geographical distribution of sepiolite, its application in the treatment of potentially toxic elements in soil and across the wider landscape, an assessment of modification and compositional variation of sepiolite-based applications within site remediation and wastewater treatment. The potential of sepiolite-based technologies is widespread and a number of processes utilize sepiolite-derived materials. Along with its intrinsic characteristics, both the long-term durability and the cost-effectiveness of the application need to be considered, making it possible to design ready-to-use products with good market acceptance. From a critical analysis of the literature, the most frequently associated terms associated with sepiolite powder are the use of lime and bentonite, while fly ash ranked in the top ten of the most frequently used material with sepiolite. These add improved performance for the inclusion as a soil or wastewater treatment options, alone or applied in combination with other treatment methods. This approach needs an integrated assessment to establish economic viability and environmental performance. Applications are not commonly evaluated from a cost-benefit perspective, in particular in relation to case studies within geographical regions hosting primary sepiolite deposits and wastes that have the potential for beneficial reuse.

Alginate bionanocomposite films containing sepiolite modified with polyphenols from myrtle berries extract.

Alginate nanocomposite films incorporating sepiolite (Sep) modified with myrtle berries extract (MBE) rich in polyphenols were prepared by solution casting method. The effects of different extract concentrations on the film properties were determined by measuring physicochemical, mechanical and antioxidant properties of the films. Fourier transform infrared (FTIR) spectra indicated that strong interactions between the polyphenols present in the MBE and sepiolite were involved in the films. The results suggested that incorporation of Sep-MBE hybrids into the films improved elongation at break, tensile strength, water vapor and UV barrier properties compared to the control film. The antioxidant activity of the films was significantly improved and raised with increasing content of MBE. The release kinetics results of MBE polyphenols from the active films into alcoholic food simulant indicated that the addition of Sep-MBE hybrids to alginate film is able to slow the release of MBE polyphenols. This study revealed the benefits of incorporation of Sep-MBE hybrids into the alginate films and their potential application as active packaging films or coating material.

Use of calcined sepiolite in removing phosphate from water and returning phosphate to soil as phosphorus fertilizer.

We investigated the application of cheap but efficient sepiolite for the removal of phosphate and the use of phosphate-adsorbed sepiolite for rice cultivation. Sepiolite was calcined under different temperatures to improve its phosphate adsorption capacity; the sepiolite calcined at 950 °C (950-SPL) was found to have highest adsorption capacity. As the calcination temperature increased, the amount of Ca eluted from sepiolite also increased, resulting in the formation of Ca-P precipitates. Phosphate adsorption on 950-SPL reached equilibrium within 12 h. Both the Langmuir and Freudlich models were not well-fitted to the equilibrium adsorption model because phosphate at initial concentration was fully removed by 950-SPL. The maximum adsorption capacity of 950-SPL with respect to phosphate was 172.34 mg/g. The phosphate adsorption of 950-SPL was endothermic and spontaneous. Phosphate adsorption at pH 3 was two times higher than at pH 11. The presence of bicarbonate significantly influenced the decrease of phosphate by 950-SPL. A breakthrough of column packed with 950-SPL/sand was not observed during >200 h. The phosphate fraction in 950-SPL was mainly composed of apatite-P and residual fraction. A toxicity test using Daphnia magna showed that the toxic units of 950-SPL corresponded to no acute toxicity. Tiller number, shoot height, shoot dry weight and total dry weight were significantly higher in P-adsorbed 950-SPL application than control. It can be concluded that calcined sepiolite can be effective in the removal of phosphate and that the sepiolite after phosphate adsorption can be used as a P fertilizer in soil.

Adsorption of Cd and Pb in contaminated gleysol by composite treatment of sepiolite, organic manure and lime in field and batch experiments.

Contamination of arable land with trace metals is a global environmental issue which has serious consequences on human health and food security. Present study evaluates the adsorption of cadmium (Cd) and lead (Pb) by using different quantities of composite of sepiolite, organic manure and lime (SOL) at field and laboratory scale (batch experiments). Characterization of SOL by SEM, EDS and FTIR spectroscopy revealed the presence of elemental and functional groups (hydroxyl, C⋯H and -COOH groups) on its surface. The field experiment was performed in a paddy field of gleysol having moderate contamination of Cd and Pb (0.64 mg kg-1 and 53.44 mg kg-1). Here, different rates of SOL (0.25, 0.5, 1, 1.5 and 2% w/w) were applied by growing low and high Cd accumulator rice cultivars. Application of SOL at 2% w/w showed considerable efficiency to increase soil pH (up to 19%) and to reduce available Cd (42-66%) and Pb (22-55%) as compared to the control. Moreover, its application reduced metal contents in roots, shoots and grains of rice by 31%, 36% and 72% (for Cd) and 41%, 81% and 84% (for Pb), respectively in low accumulator cultivar. Further, the batch sorption experiment was performed to evaluate the adsorption capacity of SOL in a wide range of contamination. Obtained sorption data was better fitted to the Langmuir equation. Our results highlight the strong efficiency of composite treatment for an enhanced in-situ metal immobilization under field and lab conditions. Further, applied treatments greatly reduced the metal contents in rice grains. In a nut shell, application of SOL in a contaminated gleysol should be considered for soil remediation and safe food production.

Hierarchical porous Mg2SiO4-CoFe2O4 nanomagnetic scaffold for bone cancer therapy and regeneration: Surface modification and in vitro studies.

3D multifunctional bone scaffolds have recently attracted more attention in bone tissue engineering because of addressing critical issues like bone cancer and inflammation beside bone regeneration. In this study, a 3D bone scaffold is fabricated from Mg2SiO4-CoFe2O4 nanocomposite which is synthesized via a two-step synthesis strategy and then the scaffold's surface is modified with poly-3-hydroxybutyrate (P3HB)-ordered mesoporous magnesium silicate (OMMS) composite to improve its physicochemical and biological properties. The Mg2SiO4-CoFe2O4 scaffold is fabricated through polymer sponge technique and the scaffold exhibits an interconnected porous structure in the range of 100-600 µm. The scaffold is then coated with OMMS/P3HB composite via dip coating and the physical, chemical, and biological-related properties of OMMS/P3HB composite-coated scaffold are assessed and compared to the non-coated and P3HB-coated scaffolds in vitro. It is found that, on the one hand, P3HB increases the cell attachment, proliferation, and compressive strength of the scaffold, but on the other hand, it weakens the bioactivity kinetic. Addition of OMMS to the coating composition is accompanied with significant increase in bioactivity kinetic. Besides, OMMS/P3HB composite-coated scaffold exhibits higher drug loading capacity and more controlled release manner up to 240 h than the other samples because of OMMS which has a high surface area and ordered mesoporous structure suitable for controlled release applications. The overall results indicate that OMMS/P3HB coating on Mg2SiO4-CoFe2O4 scaffold leads to a great improvement in bioactivity, drug delivery potential, compressive strength, cell viability, and proliferation. Moreover, OMMS/P3HB composite-coated scaffold has heat generation capability for hyperthermia-based bone cancer therapy and so it is suggested as a multifunctional scaffold with great potentials for bone cancer therapy and regeneration.

Sepiolite Clay Attenuates the Development of Hypercholesterolemia and Obesity in Mice Fed a High-Fat High-Cholesterol Diet.

Obesity reduces the quality of life and life expectancy, whereas nonoperative interventions have shown poor results so far. Statins effectively combat hypercholesterolemia but are not well tolerated at high doses, raising the need for coprescription with cholesterol sorbents and/or absorption inhibitors. Montmorillonite (MMT) clay was found to attenuate hypercholesterolemia and obesity by reducing cholesterol and fat absorption. However, acicular clay-like sepiolite may offer better results due to its more substantial adsorption of nonpolar molecules. We herein aimed at (1) assessing in vitro the capacity of sepiolite to adsorb edible oil and cholesterol compared with that of MMT and (2) assessing in vivo the effect of continuous feeding on a high-fat high-cholesterol diet (HFD) (53.6% w/w fat and 0.2% cholesterol) supplemented with 5% (w/w) edible sepiolite, on diet-induced obesity rate, hypercholesterolemia, and hyperlipidemia. Fourier transform infrared spectroscopy showed in vitro that sepiolite adsorption of olive oil and cholesterol was five to eight times greater than that of MMT clay. Sepiolite supplementation to HFD fed to mature mice for 12.5 weeks resulted in lower total blood cholesterol and triacylglycerol levels and attenuated body weight gain, by reducing fat gain. Sepiolite supplementation did not affect energy intake but increased fecal extraction of sterols and lipids, without notable side effects. These results demonstrate that supplementing a HFD with sepiolite attenuates gastrointestinal absorption of dietary lipids and sterols, thus mitigating obesity, hyperlipidemia, and hypercholesterolemia. Further exploration of the efficacy, mechanism of action, and safety of sepiolite as a food supplement for combating the metabolic syndrome is needed.

Effect of fiber source and particle size on chick performance and nutrient utilization.

The addition of fiber in chick feeds is known to dilute nutrients; as a result, this may reduce nutrient digestibility and performance. However, recent studies suggest that moderate inclusion of insoluble fibers (2 to 3%) may stimulate gizzard development, which could result in better nutrient utilization and chick growth. The previous fiber sources evaluated were subject to wide fluctuation in their nutritional and chemical composition due to variation in processing. Miscanthus giganteus is a C4 grass purposefully grown for its fiber content which has a consistent fiber composition compared to food process residues. The objectives of this study were to determine the effect of dietary fiber source and particle size on day-old chick performance and nutrient digestibility. Day-old chicks (8 chicks per cage, 5 cages per treatment) were fed diets containing 3% of either sepiolite (SEP), cellulose (CEL), coarse beet pulp (BP), fine BP, coarse Miscanthus grass (MG), and fine MG. At the end of days 7, 14, and 21, chicks and experimental diets were weighed to compute average daily gain and feed intake. In addition, excreta from the previous 48 h of each data capture point was collected to determine nutrient digestibility. In general, chicks fed diets containing fiber consumed more feed, gained more weight, and had better feed conversion rate than birds fed the SEP diet. Particle size of the fiber had no effect on chick performance; however, nutrient utilization was higher (P < 0.05) for chicks fed coarse fiber particles compared to these fed fine fiber particles. Birds fed diets containing MG performed similar to chicks fed CEL (P > 0.05), but digestibility coefficients of birds fed BP diets were generally higher than chicks fed MG diets. In conclusion, chicks performed better with fiber in their diet and MG was comparable to CEL.

Toxicity of high uranium doses in broilers and protection with mineral adsorbents.

The aim of this study was to determine the uranium distribution and histopathological changes in broiler organs (kidney, liver, and brain) and muscle after 7 days of contamination with high doses of uranyl nitrate hexahydrate (UN), and the protective efficiency of three different mineral adsorbents (organobentonite, organozeolite, and sepiolite). During the 7 days, the UN administration was 50 mg per day, and administration of adsorbents was 2 g per day immediately after UN. In control group where broilers received only UN, histopathological changes such as necrosis of intestinal villi, oedema, vacuolisation and abruption of epithelial cells in renal tubules, oedema and vacuolisation of the cytoplasm of hepatocytes, and dystrophic changes in the neurons of the medulla oblongata were observed. In contrast, when the adsorbents organobentonite, organozeolite, and sepiolite were administered, no histopathological changes were observed in liver and brain. The investigated adsorbents showed the highest protective effects in liver (80-92%), compared to the kidney (77-86%), brain (37-64%), and meat (31-63%).

Nanostructured magnetic Mg2SiO4-CoFe2O4 composite scaffold with multiple capabilities for bone tissue regeneration.

Multifunctional magnetic 3D scaffolds are recently of particular interest because of their applications in hyperthermia-based therapy and localized drug delivery beside of their basic properties to be applied in bone tissue regeneration. In the current study, a magnetic nanocomposite is designed and synthesized through a two-step synthesis strategy in which CoFe2O4 nanoparticles are prepared via sol-gel combustion method and then they are coated through sol-gel method with Mg2SiO4. The characterization relates to the nanocomposite shows that Mg2SiO4-CoFe2O4 is successfully synthesized and it has a core-shell structure. Then, 3D scaffolds are fabricated through polymer sponge technique from the nanocomposite. Physiochemical and biological properties of the scaffolds are assessed in vitro amongst which bioactivity, biodegradability, mechanical properties, hyperthermia capability, controlled release potential, antibacterial activity, cell compatibility and attachment can be mentioned. The results demonstrate that the scaffolds have high porous structure with interconnected porosity and desirable mechanical properties close to cancellous bone. The magnetic scaffold is biodegradable and bioactive and exhibits controlled release of rifampin as an antibiotic drug up to 96 h. Moreover, in the exposure of different magnetic fields it has potential to produce heat for different kinds of hyperthermia-based therapies. The antibacterial activity of drug-loaded scaffold is assessed against S. aureus bacteria. The results suggest that Mg2SiO4-CoFe2O4 nanocomposite scaffold with multiple capabilities has a great potential to be applied in the case of large bone defects which are caused by tumors to not only eradicate remained cancerous tissues, but also prevent infection after surgery and regenerate bone defect.

Comparison of slaughter yields and some meat quality parameters in broilers reared on sepiolite-supplemented wood shavings and rice hulls.

Many bedding materials have been tested in broiler industry for their suitability. However, little knowledge is available regarding the usage of different bedding materials supplemented with sepiolite and their effects on animal performance and final product quality. For this purpose, a total of 288 day-old male broiler chicks were randomly allocated into two types of bedding materials (wood shavings and rice hulls). Each bedding material group was divided into 3 sub-groups: control with 0% sepiolite, 25%-sepiolite group, and 50%-sepiolite group. Each sub-group was placed in 6 pens with 8 chicks per pen. The effects of bedding materials and sepiolite additions on slaughter yields and some meat quality parameters in broilers were evaluated. Slaughter parameters including hot carcass yield and relative weights of thigh and breast meat, heart, liver, gizzard and bursa Fabricius in broilers were not affected by bedding materials and sepiolite additions (P > 0.05). Also, no significant differences were observed among experimental groups for cooking loss and nutritional profile of breast and thigh meat of broilers (P > 0.05). The freshly measured pH0 of breast and thigh meats was significantly affected by the bedding material and was higher for wood shavings group (P < 0.01). Breast and thigh meats of broilers reared on rice hulls were lighter (P < 0.01), less red, and less yellow in color than those reared on wood shavings, whereas no effect of sepiolite additions was observed on the color of both meat cuts. No substantial effect of bedding material and sepiolite additions was observed on white stripping; however, their occurrence rate found was very high for meat of broilers reared on rice hulls than those reared on wood shavings (P > 0.05). In conclusion, broilers reared on either wood shavings or rice hulls with or without sepiolite additions did not show any negative effects on slaughter yields and meat quality parameters. Furthermore, sepiolite can be an option as a bedding material for broiler industry, but further research with thorough economic analysis is required.

Modulating Hypoxia via Nanomaterials Chemistry for Efficient Treatment of Solid Tumors.

The common existence of hypoxia in solid tumors has been heavily researched because it renders tumors more resistant to most standard therapeutic methods, such as radiotherapy (RT), chemotherapy, and photodynamic therapy (PDT), and is associated with a more malignant phenotype and poor survival in patients with tumors. The development of hypoxia modulation methods for advanced therapeutic activity is therefore of great interest but remains a considerable challenge. Since the significant development of nanotechnology and nanomedicine, functionalized nanomaterials can be exploited as adjuvant "drugs" for these oxygen-dependent standard therapies or as hypoxia initiators for advanced new therapies to solid tumors. In this Account, we summarize our recent studies on the design and synthesis of nanomaterials with a set of desired chemistry benefits achievable by modulating hypoxia, suggesting a valid therapeutic option for tumors. The investigated strategies can be categorized into three groups: The first strategy is based on countering hypoxia. Considering that O2 deficiency is the major obstacle for the oxygen-dependent therapies, we initially developed methods to supply O2 by taking advantage of the hypoxia-responsive properties of nano-MnO2 or nanomaterials' photothermal effects for increased intratumoral blood flow. The second approach is to disregard hypoxia. Possible benefits of nanoagents include reducing/eliminating reliance on O2 or making O2 replacements as adjuvants to standard therapies. To this end, we investigated a nano-upconversion/scintillator with the capacity toup-/down-convert near-infrared light (NIR)/X-ray to luminescence in the ultraviolet/visible region fortype-I PDT with minimized oxygen-tension dependency or developed Fe-based nanomaterials for chemodynamic therapy (CDT) without external energy and oxygen participation for efficient free radical killing of deep tumors. The third strategy involves exploiting hypoxia. The unique biological characteristics of hypoxia are exploited to activate nanoagents for new therapies. To address the discrepancy between the nanoagents' demand and supply within the hypoxia region, a smart "molecule-nano" medicine that stays small-molecule-like in the bloodstream and turns into self-assembled nanovesicles after entry into the hypoxia region was constructed for hypoxia-adaptive photothermal therapy (PTT). In addition to traditional anti-angiogenesis therapy, we prepared Mg2Si nanoparticles by a special self-propagating high-temperature synthesis approach. These nanoparticles can directly remove the intratumoral oxygen via the oxidation reactions of Mg2Si and later efficiently block the rapid reoxygenation via tumor blood vessels by the resultant SiO2 microsheets for cancer starvation therapy. Taken together, these findings indicate that nanomaterials will assume a valuable role for anticancer exploration based on either their properties to make up oxygen deficiency or the use of hypoxia for therapeutic applications.