Antibacterial and antioxidant double-layered nanofibrous mat promotes wound healing in diabetic rats.

Diabetic wounds are problematic to heal owing to microbial infections as well as decreased proliferation and high concentrations of reactive oxygen species. In this study, a double-layered nanofibrous mat containing grape seed extract (GSE) and silver sulfadiazine (SSD) was fabricated. A synthetic biodegradable polymer, e.g., polycaprolactone (PCL), and a natural material (i.e., collagen) were employed as wound dressing substances. The results showed that GSE possesses antioxidant activity which can be helpful in reducing free radicals. The platform exhibited antibacterial activity against gram-positive and -negative bacteria. The double-layered nanofibrous mat containing GSE and SSD not only was not toxic but also amplified the cell proliferation compared to a pure mat, showing the effect of plant extract. After induction of a round wound, the animals were divided into three groups, namely (1) normal group (receiving + GSE/-GSE nanofiber), (2) diabetic group (receiving + GSE/-GSE nanofiber), and (3) control group (receiving gauze). In vivo evaluation demonstrated no significant differences in the healing process of normal rats. Surprisingly, fully repaired skin was observed on day 14 in the double-layered nanofibrous mat containing GSE in the normal and diabetic groups whereas the wound of diabetic rats treated with pure mat was not completely healed. The macroscopic and microscopic results after 14 days showed the following order in wound repair: Normal/ + GES > Diabetic/ + GSE > Normal/-GES > Diabetic/-GSE > control (with gauze) (p < 0.05). Accordingly, the double-layered nanofibrous mat containing GSE and SSD used in the present study could be considered as a suitable wound dressing in order to shorten healing time and prevent infection during the wound healing process.

Antifungal features and properties of chitosan/sandalwood oil Pickering emulsion coating stabilized by appropriate cellulose nanofiber dosage for fresh fruit application.

A novel composite edible coating film was developed from 0.8% chitosan (CS) and 0.5% sandalwood oil (SEO). Cellulose nanofibers (CNFs) were used as a stabilizer agent of oil-in-water Pickering emulsion. We found four typical groups of CNF level-dependent emulsion stabilization, including (1) unstable emulsion in the absence of CNFs; (2) unstable emulsion (0.006-0.21% CNFs); (3) stable emulsion (0.24-0.31% CNFs); and (4) regular emulsion with the addition of surfactant. Confocal laser scanning microscopy was performed to reveal the characteristics of droplet diameter and morphology. Antifungal tests against Botrytis cinerea and Penicillium digitatum, between emulsion coating stabilized with CNFs (CS-SEOpick) and CS or CS-SEO was tested. The effective concentration of CNFs (0.24%) may improve the performance of CS coating and maintain CS-SEO antifungal activity synergistically confirmed with a series of assays (in vitro, in vivo, and membrane integrity changes). The incorporation of CNFs contributed to improve the functional properties of CS and SEO-loaded CS including light transmission at UV and visible light wavelengths and tensile strength. Atomic force microscopy and scanning electron microscopy were employed to characterize the biocompatibility of each coating film formulation. Emulsion-CNF stabilized coating may have potential applications for active coating for fresh fruit commodities.

Prospects of Polymeric Nanofibers Loaded with Essential Oils for Biomedical and Food-Packaging Applications.

Essential oils prevent superbug formation, which is mainly caused by the continuous use of synthetic drugs. This is a significant threat to health, the environment, and food safety. Plant extracts in the form of essential oils are good enough to destroy pests and fight bacterial infections in animals and humans. In this review article, different essential oils containing polymeric nanofibers fabricated by electrospinning are reviewed. These nanofibers containing essential oils have shown applications in biomedical applications and as food-packaging materials. This approach of delivering essential oils in nanoformulations has attracted considerable attention in the scientific community due to its low price, a considerable ratio of surface area to volume, versatility, and high yield. It is observed that the resulting nanofibers possess antimicrobial, anti-inflammatory, and antioxidant properties. Therefore, they can reduce the use of toxic synthetic drugs that are utilized in the cosmetics, medicine, and food industries. These nanofibers increase barrier properties against light, oxygen, and heat, thereby protecting and preserving the food from oxidative damage. Moreover, the nanofibers discussed are introduced with naturally derived chemical compounds in a controlled manner, which simultaneously prevents their degradation. The nanofibers loaded with different essential oils demonstrate an ability to increase the shelf-life of various food products while using them as active packaging materials.

Nonsolvent-induced phase separation of poly(3-hydroxybutyrate) and poly(hydroxybutyrate-co-hydroxyvalerate) blend as a facile platform to fabricate versatile nanofiber gels: Aero-, hydro-, and oleogels.

We demonstrated a strategy to prepare different types of 3-D nanofibrous polymeric gels, including hydro-, aero-, and oleogels by nonsolvent-induced phase separation (NIPS). NIPS-derived gel monoliths of poly(3-hydroxybutyrate) (PHB) and poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) blends were converted into hydrogels and aerogels by solvent exchange and freeze-drying, respectively. The high hydrophobicity and porosity of the nanofibrous PHB/PHBV aerogels enabled them to absorb various oils and swell to 20-30 times their own weight. The pseudo-second-order model was successfully used to describe the oil absorption behavior, and the obtained absorption rate constant increased with increasing PHBV content. The oil-swollen aerogels were highly elastic, thereby indicating that NIPS-derived aerogels are an excellent template for the fabrication of oleogels. With an increase in the PHBV ratio, the gels exhibited reduced modulus and collapse strength but increased collapse strain, thereby revealing higher ductility by compression. The rapid separation and re-binding of the liquid phase entrapped in the nanofiber network resulted in the unique thixotropic properties of the hydro- and oleogels. Indomethacin, a hydrophobic model drug, was successfully incorporated into injectable self-healing oleogels containing soybean oil and aerogels. These gels exhibited excellent cytocompatibility, and a better sustained drug release was observed for the oleogels compared to the aerogels.

Novel alginate-cellulose nanofiber-poly(vinyl alcohol) hydrogels for carrying and delivering nitrogen, phosphorus and potassium chemicals.

Novel nanocomposite hydrogels were successfully prepared by blending and crosslinking sodium alginate (SA), poly(vinyl alcohol) (PVA) and cellulose nanofibers (CNFs) in the presence of a fertilizer formulation containing nitrogen (N), phosphorus (P) and potassium (K). The hydrogels had a macroporous flexible core and a microporous semi- interpenetrating polymer network (IPN) shell. The crystalline nature of the NPK chemicals was retained in the hydrogel nanocomposite network. Furthermore, the SA/CNF/PVA-based hydrogels showed a higher water-retention capacity in both deionized water and mixed soil. The swelling behavior in various physiological pH, salt and alkali solutions exhibited good sensitivity. The NPK release from SA/CNF/NPK and SA/CNF/PVA/NPK hydrogels was controlled by Fickian diffusion in both water and soil based on the Korsmeyer-Peppas release kinetics model (n < 0.5). Therefore, the prepared hydrogels have the potential for applications in drought-prone and/or fertilizer-loss regions for future development of precision agriculture and horticulture.

Electrospun fibers based on botanical, seaweed, microbial, and animal sourced biomacromolecules and their multidimensional applications.

This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.

Alkaline treatment combined with enzymatic hydrolysis for efficient cellulose nanofibrils production.

Cellulose nanofibrils were efficiently produced from eucalyptus fibers using a combined NaOH and enzymatic treatment followed by a pilot scale grinding process. The structural changes of fibers were assessed after NaOH treatments at 5, 10 and 15 wt% concentrations. A progressive shift from a cellulose I to a cellulose II crystalline structure was observed with X-ray diffraction (XRD) and nuclear magnetic resonance (NMR). The further enzymatic hydrolysis was improved for the NaOH treated samples. The increase of crystallinity indices due to enzymatic hydrolysis was of + 4.7 %, + 3.5 %, and +10.3 % for samples treated with NaOH 5, 10 and 15 wt% respectively, and DP values were drastically reduced to 340, 190 and 166 respectively. A morphological analysis underlined an optimum with the combination of NaOH 10 wt% and enzymatic hydrolysis. This treatment followed by the grinding process resulted in CNF with a rigid structure, with diameters ranging from 10 to 20 nm and lengths between 150 and 350 nm. A multi-scale analysis enabled to study the impact of this combined treatment on CNF properties and energy consumption. A decrease in mechanical properties of nanopapers was observed for the combined treatment and NaOH treatment alone compared to enzymatic hydrolysis alone, with Young's modulus of 8.94, 4.84 and 11.21 GPa respectively. However, optical properties were improved, with transmittance values of 42.2, 15.4 and 7.1 % respectively. This new pretreatment can therefore lead to CNF with tunable properties depending on the application, with possible industrialization thanks to the reduction of energy needs.

Carbohydrate-based films containing pH-sensitive red barberry anthocyanins: Application as biodegradable smart food packaging materials.

A novel pH-sensitive colorimetric film was prepared based on immobilizing red barberry anthocyanins (RBAs) within composite chitin nanofiber (CNF) and methylcellulose (MC) matrices. The incorporation of CNFs and RBAs improved their mechanical properties, moisture resistance, and UV-vis screening properties. Moreover, the RBAs could be used as colorimetric indicators to detect food spoilage because they are sensitive to changes in pH and ammonia gas production. The RBA-halochromic indicator changed from reddish/crimson → pink → yellow with increasing pH, and from pink → yellow with increasing ammonia vapor concentration. Furthermore, the smart films possessed good antioxidant and antimicrobial activity owing to the presence of the RBAs and CNFs. Finally, the validity of the indicator to monitor the freshness/spoilage of a model food (fish) was demonstrated. Overall, this study shows that active/smart films can be assembled from food grade ingredients that can protect and monitor the freshness of products, like meat and fish.

3-D macro/microporous-nanofibrous bacterial cellulose scaffolds seeded with BMP-2 preconditioned mesenchymal stem cells exhibit remarkable potential for bone tissue engineering.

Bone repair using BMP-2 is a promising therapeutic approach in clinical practices, however, high dosages required to be effective pose issues of cost and safety. The present study explores the potential of low dose BMP-2 treatment via tissue engineering approach, which amalgamates 3-D macro/microporous-nanofibrous bacterial cellulose (mNBC) scaffolds and low dose BMP-2 primed murine mesenchymal stem cells (C3H10T1/2 cells). Initial studies on cell-scaffold interaction using unprimed C3H10T1/2 cells confirmed that scaffolds provided a propitious environment for cell adhesion, growth, and infiltration, owing to its ECM-mimicking nano-micro-macro architecture. Osteogenic studies were conducted by preconditioning the cells with 50 ng/mL BMP-2 for 15 min, followed by culturing on mNBC scaffolds for up to three weeks. The results showed an early onset and significantly enhanced bone matrix secretion and maturation in the scaffolds seeded with BMP-2 primed cells compared to the unprimed ones. Moreover, mNBC scaffolds alone were able to facilitate the mineralization of cells to some extent. These findings suggest that, with the aid of 'osteoinduction' from low dose BMP-2 priming of stem cells and 'osteoconduction' from nano-macro/micro topography of mNBC scaffolds, a cost-effective bone tissue engineering strategy can be designed for quick and excellent in vivo osseointegration.

Microfibrillated cellulose from Argania spinosa shells as sustainable solid particles for O/W Pickering emulsions.

Microfibrillated cellulose (MFC) from Argan (Argania spinosa) shells was prepared by chemical purification of cellulose, then mechanical disintegration via high pressure homogenization was performed to isolate fibrils of cellulose. Chemical characterization of raw argan shell (AS-R), purified cellulose (AS-C), and argan shell MFC (AS-MFC) included FT-IR, XRD and NMR. Morphological characterization of AS-MFC was assessed using TEM. Next, the use of AS-MFC as oil-in-water (O/W) emulsions stabilizer was investigated. The particle concentration was observed to affect the long-term stability of the emulsions; high concentrations (0.5-1 % w/w) of AS-MFC resulted in emulsions that were thermodynamically stable during 15 days of storage, which was demonstrated by the droplet's size evolution. The suitable oil concentration for a maximum volume of emulsion using 1 % w/w AS-MFC was demonstrated. The results show that AS-MFC is able to stabilize 70 % w/w MCT oil without visual phase separation. Finally, CLSM shows the adsorption of AS-MFC at the oil-water interface and the formation of a 3D network surrounding oil droplets, confirming Pickering emulsion formation and stabilization.

Biotin Functionalized Self-Assembled Peptide Nanofiber as an Adjuvant for Immunomodulatory Response.

Biotinylated peptide amphiphile (Biotin-PA) nanofibers, are designed as a noncovalent binding location for antigens, which are adjuvants to enhance, accelerate, and prolong the immune response triggered by antigens. Presenting antigens on synthetic Biotin-PA nanofibers generated a higher immune response than the free antigens delivered with a cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODN) (TLR9 agonist) adjuvant. Antigen attached Biotin-PA nanofibers trigger splenocytes to produce high levels of cytokines (IFN-γ, IL-12, TNF-α, and IL-6) and to exhibit a superior cross-presentation of the antigen. Both Biotin-PA nanofibers and CpG ODN induce a Th-1-biased IgG subclass response; however, delivering the antigen with Biotin-PA nanofibers induce significantly greater production of total IgG and subclasses of IgG compared to delivering the antigen with CpG ODN. Contrary to CpG ODN, Biotin-PA nanofibers also enhance antigen-specific splenocyte proliferation and increase the proportion of the antigen-specific CD8(+) T cells. Given their biodegradability and biocompatibility, Biotin-PA nanofibers have a significant potential in immunoengineering applications as a biomaterial for the delivery of a diverse set of antigens derived from intracellular pathogens, emerging viral diseases such as COVID-19, or cancer cells to induce humoral and cellular immune responses against the antigens.

Bio-based electrospun mats composed of aligned and nonaligned fibers from cellulose nanocrystals, castor oil, and recycled PET.

Cellulose nanocrystals (CNCs), castor oil (CO), and recycled poly(ethylene terephthalate) (rPET), were used to add value to renewable raw materials and to a recycled polymer produced worldwide, producing mats composed of fibers on the nano- and submicrometric (ultrathin) scales through a sustainable process. Bio-based electrospun mats composed of aligned (rotary collector) and nonaligned (static collector) nanofibers/ultrathin fibers were produced from the electrospinning of solutions prepared from rPET (mixed with CO, CNCs, or CNCs/CO). The contact angle results showed that the CNC mat surfaces composed of nonaligned fibers were hydrophilic, and in contrast, these surfaces were hydrophobic when composed of aligned fibers. Among the mats composed of nonaligned fibers, PET/CO/CNC exhibited storage and Young's moduli approximately eleven and ten times, respectively, better than those of neat rPET. The PET/CO/CNC mat showed both modulus and tensile strength values higher than those of PET/CNC, when characterized in the preferential direction of fiber alignment. Electrospun mats were obtained from environmentally sound raw materials with diversified properties, which were modulated by the type of collector used, as well as whether CO and CNC were mixed with rPET, and have the potential for use in applications such as membrane separation processes and biomedical applications.

Fabrication of nanofiltration membrane based on non-biofouling PVP/lecithin nanofibers reinforced with microcrystalline cellulose via needle and needle-less electrospinning techniques.

In this work, polyvinylpyrrolidone nanofibers were electrospun incorporated with lecithin, zero-charge natural segment, as non-biofouling nanofiltration membrane with tunable porous structures. Optimum conditions were studied to obtain nano-pore size capable of nano-scaled objects reduction using needle and needleless electrospinning apparatuses. Fiber diameters were in proportional relationship with PVP concentrations to range from 1.2 um to 34 nm at 10 to 5% wt/v PVP respectively. Microcrystalline cellulose (MCC) was added and PVP fibers were photo-crosslinked to enhance the mechanical strength. Mechanical properties of electrospun fibers were enforced up to 279% in the presence of microcrystalline cellulose while increased by 125% when exposed to photo-crosslinking for 8 h by UV-light radiation. UV-crosslinking has significantly improved the hydrophobicity of the final mat to report contact angle bigger than 90° at 16 h. Protein adhesion test was conducted to indicate the capability of the electrospun membrane to bypass the blood-plasma products. Zero protein adhesion was recorded by adding only 2% wt/v of lecithin.

Novel Clove Essential Oil Nanoemulgel Tailored by Taguchi's Model and Scaffold-Based Nanofibers: Phytopharmaceuticals with Promising Potential as Cyclooxygenase-2 Inhibitors in External Inflammation.

PURPOSE: Clove essential oil is a phytochemical possessing a vast array of biological activities. Nevertheless, fabricating nano topical delivery systems targeted to augment the anti-inflammatory activity of the oil has not been investigated so far. Accordingly, in this study, controlled release nanoparticulate systems, namely nanoemulgel and nanofibers (NFs), of the oil were developed to achieve such goal. METHODS: The nanoemulsion was incorporated in the hydrogel matrix of mixed biopolymers - chitosan, guar gum and gum acacia - to formulate nanoemulsion-based nanoemulgel. Taguchi's model was adopted to evaluate the effect of independently controlled parameters, namely, the concentration of chitosan (X1), guar gum (X2), and gum acacia (X3) on different dependently measured parameters. Additionally, the nanoemulsion-based NFs were prepared by the electrospinning technique using polyvinyl alcohol (PVA) polymer. Extensive in vitro, ex vivo and in vivo evaluations of the aforementioned formulae were conducted. RESULTS: Both Fourier transform-infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) established the complete dispersion of the nanoemulsion in the polymeric matrices of the prepared nanoemulgel and NFs. The ex vivo skin permeation data of clove essential oil from the prepared formulations showed that NFs can sustain its penetration through the skin comparably with nanoemulgel. Topical treatment with NFs (once application) and nanoemulgel (twice application) evoked a marvelous in vivo anti-inflammatory activity against croton oil-induced mouse skin inflammation model when compared with pure clove essential oil along with relatively higher efficacy of medicated NFs than that of medicated nanoemulgel. Such prominent anti-inflammatory activity was affirmed by histopathological and immunohistochemical examinations. CONCLUSION: These results indicated that nanoemulsion-based nanoemulgel and nanoemulsion-based NFs could be introduced to the phytomedicine field as promising topical delivery systems for effective treatment of inflammatory diseases instead of nonsteroidal anti-inflammatory drugs that possess adverse effects.

In situ melt electrospun polycaprolactone/Fe3O4 nanofibers for magnetic hyperthermia.

Magnetic fibrous membrane used to generate heat under the alternating magnetic field (AMF) has attracted wide attention due to their application in magnetic hyperthermia. However, there is not magnetic fibrous membrane prepared by melt electrospinning (e-spinning) which is a solvent-free, bio-friendly technology. In this work, polycaprolactone (PCL)/Fe3O4 fiber membrane was prepared by melt e-spinning and using homemade self-powered portable melt e-spinning apparatus. The hand-held melt e-spinning apparatus has a weight of about 450 g and a precise size of 24 cm in length, 6 cm in thickness and 13 cm in height, which is more portable for widely using in the medical field. The PCL/Fe3O4 composite fibers with diameters of 4-17 µm, are very uniform. In addition, the magnetic composite fiber membrane has excellent heating efficiency and thermal cycling characteristics. The results indicated that self-powered portable melt e-spinning apparatus and PCL/Fe3O4 fiber membrane may provide an attractive way for hyperthermia therapy.

Sesamol incorporated cellulose acetate-zein composite nanofiber membrane: An efficient strategy to accelerate diabetic wound healing.

Recently, the function of nanofiber membranes prepared from electrospinning in accelerating wound healing has attracted wide attention. In this study, novel nanofiber membranes consisted of cellulose acetate (CA) and zein were fabricated to provide efficient delivery vehicles for sesamol, and then the effect of sesamol-loaded composite nanofiber membranes on the wound healing of diabetic mice was studied. It was found the critical concentration of CA was between 15% and 25% (w/v), and the most suitable concentration of stabilizing fibers was 22.5%. When the CA/zein ratio was 12:8, the fiber obtained small diameter and uniform distribution, stable intermolecular structure, low infiltration speed and high stability in water. The composite nanofiber membrane with high-dose sesamol (5% of total polymer concentration, w/w) promoted formation of myofibroblasts by enhancing TGF-ß signaling pathway transduction, and promoted keratinocyte growth by inhibiting chronic inflammation in wounds, thus enhancing wound healing in diabetic mice. This study can further broaden the application range of sesamol, CA and zein, and provide reference for the design and development of new wound dressings in the future.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties.

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Electrospun oral formulations for combined photo-chemotherapy of colon cancer.

In this work, we report new formulations for the combined photo-chemotherapy of colon cancer. Fibers were fabricated via coaxial-electrospinning with the intent of targeting delivery of the anti-cancer drug carmofur (CAR) and the photosensitizer rose bengal (RB) selectively to the colon site. The fibers comprised a hydroxypropyl methylcellulose (HPMC) core loaded with the active ingredients, and a pH-sensitive Eudragit L100-55 shell. The fibers were found to be homogeneous and cylindrical and have visible core-shell structures. X-ray diffraction and differential scanning calorimetry demonstrated that both CAR and RB were present in the fibers in the amorphous physical form. In vitro drug release studies showed that the fibers have the potential to selectively deliver drugs to the colon, with only 10-15 % release noted in the acidic conditions of the stomach but sustained release at pH 7.4. Cytotoxicity studies were undertaken on human dermal fibroblast (HDF) and colon cancer (Caco-2) cells, and the influence of light on cell death was also explored. The fibers loaded with CAR alone showed obvious toxicity to both cell lines, with and without the application of light. The RB-loaded fibers led to high viability (ca. 80% for both cell types) in the absence of light, but much greater toxicity was noted (30-50%) with light. The same trends were observed with the formulation containing both CAR and RB, but with lower viabilities. The RB and RB/CAR loaded systems show clear selectivity for cancerous over non-cancerous cells. Finally, mucoadhesion studies revealed there were strong adhesive forces between the rat colonic mucosa and the fibers after they had passed through an acidic environment. Such electrospun fibers thus could have potential in the development of oral therapies for colon cancer.

Photothermal transforming agent and chemotherapeutic co-loaded electrospun nanofibers for tumor treatment.

Background: Photothermal and chemotherapy treatment has been frequently studied for cancer therapy; however, chemotherapy is equally toxic to both normal and cancer cells. The clinical application value of most kinds of photothermal transforming agents remains limited, due to their poor degradation and minimal accumulation in tumors. Materials and methods: We reported the synthesis of photothermal transforming agents (MoS2) and chemotherapeutic (doxorubicin, DOX) co-loaded electrospun nanofibers using blend electrospinning for the treatment of postoperative tumor recurrence. Results: Under the irradiation of an 808 nm laser, the as-prepared chitosan/polyvinyl alcohol/MoS2/DOX nanofibers showed an admirable photothermal conversion capability with a photothermal conversion efficiency of 23.2%. These composite nanofibers are in vitro and in vivo biocompatible. In addition, they could control the sustained release of DOX and the generated heat can sensitize the chemotherapeutic efficacy of DOX via enhancing its release rate. Their chemo-/photothermal combined therapy efficiency was systematically studied in vitro and in vivo. Instead of circulating with the body fluid, MoS2 was trapped by the nanofibrous matrix in the tumor and so its tumor-killing ability was not compromised, thus rendering this composite nanofiber a promising alternative for future clinical translation within biomedical application fields. Conclusion: Chitosan/polyvinyl alcohol/MoS2/DOX nanofibers showed an excellent photothermal conversion capability with a photothermal conversion efficiency of 23.2% and can completely inhibit the postoperative tumor reoccurrence.

Directed self-assembly of herbal small molecules into sustained release hydrogels for treating neural inflammation.

Self-assembling natural drug hydrogels formed without structural modification and able to act as carriers are of interest for biomedical applications. A lack of knowledge about natural drug gels limits there current application. Here, we report on rhein, a herbal natural product, which is directly self-assembled into hydrogels through noncovalent interactions. This hydrogel shows excellent stability, sustained release and reversible stimuli-responses. The hydrogel consists of a three-dimensional nanofiber network that prevents premature degradation. Moreover, it easily enters cells and binds to toll-like receptor 4. This enables rhein hydrogels to significantly dephosphorylate IκBα, inhibiting the nuclear translocation of p65 at the NFκB signalling pathway in lipopolysaccharide-induced BV2 microglia. Subsequently, rhein hydrogels alleviate neuroinflammation with a long-lasting effect and little cytotoxicity compared to the equivalent free-drug in vitro. This study highlights a direct self-assembly hydrogel from natural small molecule as a promising neuroinflammatory therapy.