Epsilon-poly-l-lysine microneedle patch loaded with amorphous doxycycline nanoparticles for synergistic treatment of skin infection.

The development of antibiotic-loaded microneedles has been hindered for years by limited excipient options, restricted drug-loading space, poor microneedle formability, and short-term drug retention. Therefore, this study proposes a dissolving microneedle fabricated from the host-defense peptide ε-poly-l-lysine (EPL) as an antibacterial adjuvant system for delivering antibiotics. EPL serves not only as a major matrix material for the microneedle tips, but also as a broad-spectrum antibacterial agent that facilitates the intracellular accumulation of the antibiotic doxycycline (DOX) by increasing bacterial cell membrane permeability. Furthermore, the formation of physically crosslinked networks of EPL affords microneedle tips with improved formability, good mechanical properties, and amorphous nanoparticles (approximately 7.2 nm) of encapsulated DOX. As a result, a high total loading content of both antimicrobials up to 2319.1 µg/patch is achieved for efficient transdermal drug delivery. In a Pseudomonas aeruginosa-induced deep cutaneous infection model, the EPL microneedles demonstrates potent and long-term effects by synergistically enhancing antibiotic activities and prolonging drug retention in infected lesions, resulting in remarkable therapeutic efficacy with 99.91 % (3.04 log) reduction in skin bacterial burden after a single administration. Overall, our study highlights the distinct advantages of EPL microneedles and their potential in clinical antibacterial practice when loaded with amorphous DOX nanoparticles.

Novel Hydrogel Adjuvant of Chinese Medicine External Preparations for Accelerated Healing of Deep Soft Tissue Injuries.

Traditional Chinese medicine external prescriptions have displayed excellent clinical effects for treating deep soft tissue injuries. However, the effects cannot be fully utilized due to the limitations of their dosage forms and usage methods. It is still a challenge to develop a satisfactory adjuvant of traditional Chinese medicine external prescriptions. Herein, a hydrogel adjuvant was prepared based on gallic acid coupled ε-poly-l-lysine and partially oxidized hyaluronic acid. The resulting adjuvant shows great physicochemical properties, low hemolysis rate (still much less than 5% at 5 mg/mL), excellent antibacterial ability (about 95% at 2 mg/mL), strong antioxidant ability (1.687 ± 0.085 mmol FeSO4/(g hydrogel) at 1 mg/mL), as well as outstanding biocompatibility. A clinically used Chinese medicine external preparation was selected as an example to investigate the effectiveness of the adjuvant in treating deep soft tissue injuries. The results show that the prescription can be evenly dispersed in the adjuvant. Moreover, the introduction of the prescription has not significantly changed these advanced properties of the adjuvant. Importantly, the hydrogel adjuvant significantly improves the effectiveness of the prescription in treating deep soft tissue injuries. This work offers an alternative approach to the development of a new-type adjuvant of Chinese medicine external preparations and also provides a new strategy for the combination of traditional Chinese medicine and hydrogel to treat clinical diseases.

Crosslinked Layered Surfaces of Heparin and Poly(L-Lysine) Enhance Mesenchymal Stromal Cell Behavior in the Presence of Soluble Interferon Gamma.

Human mesenchymal stromal cells (hMSCs) are multipotent cells that have been proposed for the treatment of immune-mediated diseases. Culturing hMSCs on tissue culture plastic reduces their therapeutic potential in part due to the lack of extracellular matrix components. The aim of this study is to evaluate multilayers of heparin and poly(L-lysine) (HEP/PLL) as a bioactive surface for hMSCs stimulated with soluble interferon gamma (IFN-γ). Multilayers were formed, via layer-by-layer assembly, with HEP as the final layer and supplemented with IFN-γ in the culture medium. Multilayer construction and chemistry were confirmed using Azure A staining, quartz crystal microbalance, and X-ray photoelectron spectroscopy. hMSCs adhesion, viability, and differentiation, were assessed. Results showed that (HEP/PLL) multilayer coatings were poorly adhesive for hMSCs. However, performing chemical crosslinking using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide significantly enhanced hMSCs adhesion and viability. The immunosuppressive properties of hMSCs cultured on crosslinked (HEP/PLL) multilayers were confirmed by measuring indoleamine 2,3-dioxygenase activity. Lastly, hMSCs cultured on crosslinked (HEP/PLL) multilayers in the presence of soluble IFN- γ successfully differentiated towards the osteogenic and adipogenic lineages as confirmed by Alizarin red, and oil-red O staining, as well as alkaline phosphatase activity. This study suggests that crosslinked (HEP/PLL) films can modulate hMSCs response to soluble factors, which may improve hMSCs-based therapies aimed at treating several immune diseases.

Dual-Grafting of Microcrystalline Cellulose by Tea Polyphenols and Cationic ε-Polylysine to Tailor a Structured Antimicrobial Soy-Based Emulsion for 3D Printing.

An imperative processing way to produce 3D printed structures with enhanced multifunctional properties is printing inks in the form of a gel-like colloidal emulsion. The surface-modified microcrystalline cellulose (MCC) is an excipient of outstanding merit as a particulate emulsifier to manufacture a stable Pickering emulsion gel. The tuning of the MCC structure by cationic antimicrobial compounds, such as ε-polylysine (ε-PL), can offer a surface activity with an antimicrobial effect. However, the MCC/ε-PL lacks the appropriate emulsifying ability due to the development of electrostatic complexes. To overcome this challenge, (i) a surface-active MCC conjugate was synthesized by a sustainable dual-grafting technique (ii) to produce a highly stable therapeutic soy-based Pickering emulsion gel (iii) for potential application in 3D printing. In this regard, the tea polyphenols were initially introduced into MCC by the free-radical grafting method to decrease the charge density of anionic MCC. Then, the antioxidative MCC-g-tea polyphenols were reacted by ε-PL to produce a dual-grafted therapeutic MCC conjugate (micro-biosurfactant), stabilizing the soy-based emulsion system. The results indicated that the dual-grafted micro-biosurfactant formed a viscoelastic and thixotropic soy-based emulsion gel with reduced droplet size and long-term stability. Besides, there was an improvement in the interfacial adsorption features of soy-protein particles after micro-biosurfactant incorporation, where the interfacial pressure and surface dilatational viscoelastic moduli were enhanced. Consequently, it was revealed that the therapeutic Pickering emulsion gel was more suitable to manufacture a well-defined 3D architecture with high resolution and retained permanent deformation after unloading (i.e., a recoverable matrix). This work established that the modification of the MCC backbone by tea polyphenols and ε-PL advances its bioactive properties and emulsifying performance, which finally obtains a soy-based 3D printed structure with noteworthy mechanical strength.

Poly-L-Lysine-Lactobionic Acid-Capped Selenium Nanoparticles for Liver-Targeted Gene Delivery.

Liver cancer is currently regarded as the second leading cause of cancer-related mortality globally and is the sixth most diagnosed malignancy. Selenium nanoparticles (SeNPs) have attracted favorable attention as nanocarriers for gene therapy, as they possess beneficial antioxidant and anticancer properties. This study aimed to design, functionalize and characterize SeNPs to efficiently bind, protect and deliver pCMV-Luc DNA to hepatocellular carcinoma (HepG2) cells. The SeNPs were synthesized by ascorbic acid reduction and functionalized with poly-L-lysine (PLL) to stabilize and confer positive charges to the nanoparticles. The SeNPs were further decorated with lactobionic acid (LA) to target the asialoglycoprotein receptors abundantly expressed on the surface of the hepatocytes. All SeNPs were spherical, in the nanoscale range (<130 nm) and were capable of successfully binding, compacting and protecting the pDNA against nuclease degradation. The functionalized SeNP nanocomplexes exhibited minimal cytotoxicity (<30%) with enhanced transfection efficiency in the cell lines tested. Furthermore, the targeted SeNP (LA-PLL-SeNP) nanocomplex showed significant (* p < 0.05, ** p < 0.01, **** p < 0.0001) transgene expression in the HepG2 cells compared to the receptor-negative embryonic kidney (HEK293) cells, confirming receptor-mediated endocytosis. Overall, these functionalized SeNPs exhibit favorable features of suitable gene nanocarriers for the treatment of liver cancer.

Utility of carboxylated poly L-lysine for the liquid storage of bottlenose dolphin semen.

Assisted reproduction techniques are required to maintain a genetically diverse captive population of bottlenose dolphins. These techniques include semen preservation, and liquid storage has been proposed as a suitable alternative to cryopreservation, but the optimum conditions, in terms of temperature, duration, and media, have yet to be fully established. The aim of this study, therefore, was to determine the optimum temperature for the liquid storage of dolphin semen during a 14-day period and the usefulness of carboxylated poly-L-lysine (CPLL) as an additive to the semen extender used for the liquid storage. The semen was collected from a mature male dolphin housed at the Kagoshima Aquarium, Japan, transferred into a Beltsville (BF5F) extender, and analyzed for motility and characteristics after five-fold dilution. The optimum temperature was determined by evaluating sperm viability after liquid storage at 4, 17, or 36 °C, and the usefulness of CPLL was evaluated at concentrations of 0%, 0.5%, 1.0%, 2.0%, and 3.0% (v/v) at the optimum temperature. Sperm stored at 4 â„ƒ had a greater motility maintenance compared with samples stored at 17 or 36 â„ƒ. The most efficacious storage regimen at various time points occurred when there was addition of CPLL at 1.0% (v/v) in terms of sperm motility and other relevant determinations, with this storage approach having greater efficacy that samples stored without CPLL. The most efficacious processes for preserving bottlenose dolphin sperm functions is storage at 4 °C and with there being semen extender supplementation of 1% CPLL.

Sequential Application of Calcium Phosphate and ε-Polylysine Show Antibacterial and Dentin Tubule Occluding Effects In Vitro.

In this study, ε-polylysine and calcium phosphate precipitation (CPP) methods were employed to induce antibacterial effects and dentin tubule occlusion. Antibacterial effects of ε-polylysine were evaluated with broth dilution assay against P. gingivalis. CPP solution from MCPM, DCPD, and TTCP was prepared. Four concentrations of ε-polylysine(ε-PL) solutions (0.125%, 0.25%, 0.5%, 1%) were prepared. Dentin discs were prepared from recently extracted human third molars. Dentin discs were incubated with P. gingivalis (ATCC 33277) bacterial suspension (ca. 105 bacteria) containing Brain Heart Infusion medium supplemented with 0.1 g/mL Vitamin K, 0.5 mg/mL hemin, 0.4 g/mL L-cysteine in anaerobic jars (37 °C) for 7 days to allow for biofilm formation. P. g-infected dentin specimens were randomly divided into four groups: CPP + 0.125% ε-PL, CPP + 0.25% ε-PL, CPP + 0.5% ε-PL, CPP + 1% ε-PL. On each dentin specimen, CPP solution was applied followed by polylysine solution with microbrush and immersed in artificial saliva. Precipitate formation, antibacterial effects, and occlusion of dentinal tubules were characterized in vitro over up to 72 h using scanning electron microscopy. ε-PL showed 34.97% to 61.19% growth inhibition levels against P. gingivalis (P. g) after 24 h of incubation. On P. g-infected dentin specimens, DCPD + 0.25% ε-PL, and DCPD + 0.5% ε-PL groups showed complete bacterial inhibition and 78.6% and 98.1% dentin tubule occlusion, respectively (p < 0.001). The longitudinal analysis on fractured dentin samples in DCPD and TTCP groups revealed deeply penetrated hydroxyapatite-like crystal formations in dentinal tubules after 72 h of incubation in artificial saliva.

Enhancement of Antibacterial and Mechanical Properties of Photocurable ε-Poly-l-lysine Hydrogels by Tannic Acid Treatment.

In this study, a photocurable hydrogel based on an ε-poly-l-lysine (EPL) composite was fabricated by a grafting reaction using glycidyl methacrylate and then complexed with tannic acid (TA) to improve the mechanical stability and antibacterial performance of the EPL hydrogels. UV-visible spectrophotometry, nuclear magnetic resonance, and Fourier transform infrared spectroscopy were introduced to characterize the chemical construction. The obtained EPLMA hydrogel was immersed into TA solution to induce the forming of the H-bond between EPL and TA, resulting in double networks in the composite hydrogel (EPLMA-TA). Due to the additional hydrogen-bond interaction between TA and EPLMA, the mechanical properties of hydrogels were improved and supported cell growth and proliferation. In addition, the antibacterial properties and antioxidant activities of the EPLMA-TA hydrogels were greatly enhanced due to the addition of TA. All the findings indicate that the EPLMA-TA hydrogels with multiple properties show great potential for biomedicine applications.

Transplantation of encapsulated human Leydig-like cells: A novel option for the treatment of testosterone deficiency.

Previous studies have demonstrated that the transplantation of alginate-poly-ʟ-lysine-alginate (APA)-encapsulated rat Leydig cells (LCs) provides a promising approach for treating testosterone deficiency (TD). Nevertheless, LCs have a limited capacity to proliferate, limiting the efficacy of LC transplantation therapy. Here, we established an efficient differentiation system to obtain functional Leydig-like cells (LLCs) from human stem Leydig cells (hSLCs). Then we injected APA-encapsulated LLCs into the abdominal cavities of castrated mice without an immunosuppressor. The APA-encapsulated cells survived and partially restored testosterone production for 90 days in vivo. More importantly, the transplantation of encapsulated LLCs ameliorated the symptoms of TD, such as fat accumulation, muscle atrophy and adipocyte accumulation in bone marrow. Overall, these results suggest that the transplantation of encapsulated LLCs is a promising new method for testosterone supplementation with potential clinical applications in TD.

Covalent Organic Framework Embedded with Magnetic Nanoparticles for MRI and Chemo-Thermotherapy.

Nanoscale imine-linked covalent organic frameworks (nCOFs) were first loaded with the anticancer drug Doxorubicin (Dox), coated with magnetic iron oxide nanoparticles (γ-Fe2O3 NPs), and stabilized with a shell of poly(l-lysine) cationic polymer (PLL) for simultaneous synergistic thermo-chemotherapy treatment and MRI imaging. The pH responsivity of the resulting nanoagents (γ-SD/PLL) allowed the release of the drug selectively within the acidic microenvironment of late endosomes and lysosomes of cancer cells (pH 5.4) and not in physiological conditions (pH 7.4). γ-SD/PLL could efficiently generate high heat (48 °C) upon exposure to an alternating magnetic field due to the nCOF porous structure that facilitates the heat conduction, making γ-SD/PLL excellent heat mediators in an aqueous solution. The drug-loaded magnetic nCOF composites were cytotoxic due to the synergistic toxicity of Dox and the effects of hyperthermia in vitro on glioblastoma U251-MG cells and in vivo on zebrafish embryos, but they were not significantly toxic to noncancerous cells (HEK293). To the best of our knowledge, this is the first report of multimodal MRI probe and chemo-thermotherapeutic magnetic nCOF composites.

Finely tuned Prussian blue-based nanoparticles and their application in disease treatment.

The Prussian blue (PB) based nanostructure is a mixed-valence coordination network with excellent biosafety, remarkable photothermal effect and multiple enzyme-mimicking behaviours. Compared with other nanomaterials, PB-based nanoparticles (NPs) exhibit several unparalleled advantages in biomedical applications. This review begins with the chemical composition and physicochemical properties of PB-based NPs. The tuning strategies of PB-based NPs and their biomedical properties are systemically demonstrated. Afterwards, the biomedical applications of PB-based NPs are comprehensively recounted, mainly focusing on treatment of tumors, bacterial infection and inflammatory diseases. Finally, the challenges and future prospects of PB-based NPs and their application in disease treatment are discussed.

Complexation of Injectable Biphasic Calcium Phosphate with Phosphoserine-Presenting Dendrons with Enhanced Osteoregenerative Properties.

Injectable biphasic calcium phosphates have been proposed as a solution in the treatment of a range of clinical applications including as fillers in the augmentation of osteoporotic bone. To date, various biodegradable natural or synthetic organics have been used as a polymer component of bone materials to increase their cohesiveness. Herein, a novel bone material was developed combining osteoconductive biphasic calcium phosphate (BCP) nanoparticles with phosphoserine-tethered generation 3 poly(epsilon-lysine) dendron (G3-K PS), a class of hyperbranched peptides previously shown to induce biomineralization and stem cell osteogenic differentiation. Strontium was also incorporated into the BCP nanocrystals (SrBCP) to prevent bone resorption. Within 24 h, an antiwashout behavior was observed in G3-K PS-integrated pure BCP group (BCPG3). Moreover, both in vitro tests by relevant cell phenotypes and an in vivo tissue regeneration study by an osteoporotic animal bone implantation showed that the integration of G3-K PS would downregulate Cxcl9 gene and protein expressions, thus enhancing bone regeneration measured as bone mineral density, new bone volume ratio, and trabecular microarchitectural parameters. However, no synergistic effect was found when Sr was incorporated into the BCPG3 bone pastes. Notably, results indicated a concomitant reduction of bone regeneration potential assessed as reduced Runx2 and PINP expression when bone resorptive RANKL and CTX-I levels were reduced by Sr supplementation. Altogether, the results suggest the potential of injectable BCPG3 bone materials in the treatment of osteoporotic bone defects.

Increasing the Sensitivity of Electrochemical DNA Detection by a Micropillar-Structured Biosensing Surface.

The available active surface area and the density of probes immobilized on this surface are responsible for achieving high specificity and sensitivity in electrochemical biosensors that detect biologically relevant molecules, including DNA. Here, we report the design of gold-coated, silicon micropillar-structured electrodes functionalized with modified poly-l-lysine (PLL) as an adhesion layer to concomitantly assess the increase in sensitivity with the increase of the electrochemical area and control over the probe density. By systematically reducing the center-to-center distance between the pillars (pitch), denser micropillar arrays were formed at the electrode, resulting in a larger sensing area. Azido-modified peptide nucleic acid (PNA) probes were click-reacted onto the electrode interface, exploiting PLL with appended oligo(ethylene glycol) (OEG) and dibenzocyclooctyne (DBCO) moieties (PLL-OEG-DBCO) for antifouling and probe binding properties, respectively. The selective electrochemical sandwich assay formation, composed of consecutive hybridization steps of the target complementary DNA (cDNA) and reporter DNA modified with the electroactive ferrocene functionality (rDNA-Fc), was monitored by quartz crystal microbalance. The DNA detection performance of micropillared electrodes with different pitches was evaluated by quantifying the cyclic voltammetric response of the surface-confined rDNA-Fc. By decrease of the pitch of the pillar array, the area of the electrode was enhanced by up to a factor 10.6. A comparison of the electrochemical data with the geometrical area of the pillared electrodes confirmed the validity of the increased sensitivity of the DNA detection by the design of the micropillar array.

Actin Cytoskeleton-Disrupting and Magnetic Field-Responsive Multivalent Supramolecular Assemblies for Efficient Cancer Therapy.

Actin cytoskeleton disruption is a promising and intriguing anticancer strategy, but their efficiency is frequently compromised by severe side effects of the actin cytoskeleton-disrupting agents. In this study, we constructed the biocompatible actin cytoskeleton-targeting multivalent supramolecular assemblies that specifically target and disrupt the tumor actin cytoskeleton for cancer therapy. The assemblies were composed of ß-cyclodextrin-grafted hyaluronic acid (HACD) and iron oxide magnetic nanoparticles (MNPs) grafted by an actin-binding peptide (ABP) and adamantane (Ada)-modified polylysine. Owing to the multivalent binding between cyclodextrin and Ada, HACD, and peptide-grafted MNPs (MNP-ABP-Ada) could self-assemble to form MNP-ABP-Ada⊂HACD nanofibers in a geomagnetism-dependent manner. Furthermore, the presence of ABP rendered the assemblies to efficiently target the actin cytoskeleton. Interestingly, with the acid of a low-frequency alternating magnetic field (200 Hz), the actin cytoskeleton-targeting nanofibers could induce severe actin disruption, leading to a remarkable cell cycle arrest and drastic cell death of tumor cells both in vitro and in vivo, but showed no obvious toxicity to normal cells. The actin cytoskeleton-targeting/disrupting supramolecular assembly implies an excellent strategy for realizing efficient cancer therapy.

A method for the separation of TiO2 nanoparticles from Water through encapsulation with lecithin liposomes followed by adsorption onto poly(L-lysine) coated glass surfaces.

Increasing use of nanomaterials in the consumer and pharmaceutical industries has led to emerging contamination by released nanoparticles in wastewater and drinking water, causing major concerns for public health. Titanium dioxide (TiO2) nanoparticles are one of the major nanoparticles of growing concern with a strong need for efficient removal. In this work, removal of TiO2 nanoparticles from water was investigated by first coating with polydopamine (PDA) and then encapsulating within lecithin liposomes for adsorption onto poly-l-lysine (PLL) coated glass surfaces. The PLL coating was confirmed using atomic force microscopy, with a thickness of 30 nm. An average percent removal of 58% with a standard deviation of 18% was obtained for concentrations ranging from 5 mg/L to 125 mg/L following capture experiments. This method provides a promising solution to alleviate the potential health hazard caused by TiO2 nanoparticles. It is minimally affected by such water quality variables as alkalinity, ionic strength and humic acid. No coagulation, flocculation and sedimentation stages are necessary.

Triggered RNAi Therapy Using Metal Inorganic Nanovectors.

The administration of small interfering RNA (siRNA) is a very interesting therapeutic option to treat genetic diseases such as Alzheimer's or some types of cancer, but its effective delivery still remains a challenge. Herein, Au nanorod (GNR)-based platforms functionalized with polyelectrolyte layers were developed and analyzed as potential siRNA nanocarriers. The polymeric layers were successfully assembled on the particle surfaces by means of the layer-by-layer assembly technique through the alternating deposition of oppositely charged poly(styrene)sulfonate, PSS, poly(lysine), PLL, and siRNA biopolymers, with a final hyaluronic acid layer in order to provide the nanoconstructs with a potential targeting ability as well as colloidal stability in physiological medium. Once the hybrid nanocarriers were obtained, the cargo release, their colloidal stability in physiological-relevant media, cytotoxicity, cellular internalization and uptake, and knockdown activity were studied. The present hybrid particles release the genetic material inside cells by means of a protease-assisted and/or a light-triggered release mechanism in order to control the delivery of the oligonucleotides on demand. In addition, the hybrid nanovectors were observed to be nontoxic to cells and could efficiently deliver the genetic material in the cell cytoplasms. The GNR-based nanocarriers proposed here can provide a suitable environment to load and protect a sufficient amount of the genetic material to allow an efficient and sustained knockdown gene expression for long (up to 93% for 72 h), thanks to the slow degradation of PLL, without the observation of adverse side toxic effects. It was also found that the silencing activity was enhanced with the number of siRNA layers assembled in the nanoplatforms.

Photoacoustic-imaging-guided therapy of functionalized melanin nanoparticles: combination of photothermal ablation and gene therapy against laryngeal squamous cell carcinoma.

Multimodality therapy under imaging-guidance is significant to improve the accuracy of cancer treatment. In this study, a photoacoustic imaging (PAI)-guided anticancer strategy based on poly-l-lysine functionalized melanin nanoparticles (MNP-PLL) was developed to treat laryngeal squamous cell carcinoma (LSCC). As a promising alternative to traditional therapies for LSCC, MNP-PLL/miRNA nanoparticles were combined with photothermal ablation against primary tumors and miR-145-5p mediated gene therapy for depleting the metastatic potential of tumor cells. Furthermore, taking advantage of the photoacoustic properties of melanin, PAI guided therapy could optimize the time point of NIR irradiation to maximize the efficacy of photothermal therapy (PTT). The in vitro and in vivo results proved that the combined treatments displayed the most significant tumor suppression compared with monotherapy. By integrating thermo-gene therapies into a theranostic nanoplatform, the MNP-PLL/miR-145-5p nanoparticles significantly suppressed the LSCC progression, indicating their great potential use for cancer therapy.

Rational Design of IR820- and Ce6-Based Versatile Micelle for Single NIR Laser-Induced Imaging and Dual-Modal Phototherapy.

Phototherapy as a promising cancer diagnostic and therapeutic strategy has aroused extensive attention. However, single-wavelength near-infrared (NIR) light-triggered combinational treatment of photothermal therapy (PTT) and photodynamic therapy (PDT) is still a great challenge. Herein, a multifunctional micelle activated by a single-wavelength laser for simultaneous PTT and PDT as well as fluorescence imaging is developed. Briefly, new indocyanine green (IR820) is conjugated to d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) via the linker 6-aminocaproic acid, and then, chlorin e6 (Ce6) is encapsulated into the micelles formed by TPGS-IR820 conjugates to fabricate TPGS-IR820/Ce6 micelles. As the well-designed TPGS-IR820 conjugate shares a similar peak absorption wavelength with Ce6, this micelle can be applied with a single NIR laser (660 nm). The stable micelles exhibit excellent photothermal conversion efficiency in vitro and in vivo as well as high singlet oxygen generation capacity in tumor cells. After efficient cellular internalization, the as-prepared micelles display outstanding anticancer activity upon single NIR laser irradiation in vitro and in vivo. Furthermore, TPGS-IR820/Ce6 micelles show negligible systemic toxicity. The highly safe and effective TPGS-IR820/Ce6 micelles can offer an innovative strategy to construct single NIR light-induced PTT and PDT combined phototherapy nanoplatforms via suitable modification of organic phototherapeutic agents.

Control of Probe Density at DNA Biosensor Surfaces Using Poly(l-lysine) with Appended Reactive Groups.

Biosensors and materials for biomedical applications generally require chemical functionalization to bestow their surfaces with desired properties, such as specific molecular recognition and antifouling properties. The use of modified poly(l-lysine) (PLL) polymers with appended oligo(ethylene glycol) (OEG) and thiol-reactive maleimide (Mal) moieties (PLL-OEG-Mal) offers control over the presentation of functional groups. These reactive groups can readily be conjugated to, for example, probes for DNA detection. Here we demonstrate the reliable conjugation of thiol-functionalized peptide nucleic acid (PNA) probes onto predeposited layers of PLL-OEG-Mal and the control over their surface density in the preceding synthetic step of the PLL modification with Mal groups. By monitoring the quartz crystal microbalance (QCM) frequency shifts of the binding of complementary DNA versus the density of Mal moieties grafted to the PLL, a linear relationship between probe density and PLL grafting density was found. Cyclic voltammetry experiments using Methylene Blue-functionalized DNA were performed to establish the absolute probe density values at the biosensor surfaces. These data provided a density of 1.2 × 1012 probes per cm2 per % of grafted Mal, thus confirming the validity of the density control in the synthetic PLL modification step without the need of further surface characterization.

Polymer coated gold-ferric oxide superparamagnetic nanoparticles for theranostic applications.

BACKGROUND: Engineered inorganic nanoparticles (NPs) are essential components in the development of nanotechnologies. For applications in nanomedicine, particles need to be functionalized to ensure a good dispersibility in biological fluids. In many cases however, functionalization is not sufficient: the particles become either coated by a corona of serum proteins or precipitate out of the solvent. We show that by changing the coating of magnetic iron oxide NPs using poly-L-lysine (PLL) polymer the colloidal stability of the dispersion is improved in aqueous solutions including water, phosphate buffered saline (PBS), PBS with 10% fetal bovine serum (FBS) and cell culture medium, and the internalization of the NPs toward living mammalian cells is profoundly affected. METHODS: A multifunctional magnetic NP is designed to perform a near-infrared (NIR)-responsive remote control photothermal ablation for the treatment of breast cancer. In contrast to the previously reported studies of gold (Au) magnetic (Fe3O4) core-shell NPs, a Janus-like nanostructure is synthesized with Fe3O4 NPs decorated with Au resulting in an approximate size of 60 nm mean diameter. The surface of trisoctahedral Au-Fe3O4 NPs was coated with a positively charged polymer, PLL to deliver the NPs inside cells. The PLL-Au-Fe3O4 NPs were characterized by transmission electron microscopy (TEM), XRD, FT-IR and dynamic light scattering (DLS). The unique properties of both Au surface plasmon resonance and superparamagnetic moment result in a multimodal platform for use as a nanothermal ablator and also as a magnetic resonance imaging (MRI) contrast agent, respectively. Taking advantage of the photothermal therapy, PLL-Au-Fe3O4 NPs were incubated with BT-474 and MDA-MB-231 breast cancer cells, investigated for the cytotoxicity and intracellular uptake, and remotely triggered by a NIR laser of ~ 808 nm (1 W/cm2 for 10 min). RESULTS: The PLL coating increased the colloidal stability and robustness of Au-Fe3O4 NPs (PLL-Au-Fe3O4) in biological media including cell culture medium, PBS and PBS with 10% fetal bovine serum. It is revealed that no significant (< 10%) cytotoxicity was induced by PLL-Au-Fe3O4 NPs itself in BT-474 and MDA-MB-231 cells at concentrations up to 100 µg/ml. Brightfield microscopy, fluorescence microscopy and TEM showed significant uptake of PLL-Au-Fe3O4 NPs by BT-474 and MDA-MB-231 cells. The cells exhibited 40 and 60% inhibition in BT-474 and MDA-MB-231 cell growth, respectively following the internalized NPs were triggered by a photothermal laser using 100 µg/ml PLL-Au-Fe3O4 NPs. The control cells treated with NPs but without laser showed < 10% cell death compared to no laser treatment control CONCLUSION: Combined together, the results demonstrate a new polymer gold superparamagnetic nanostructure that integrates both diagnostics function and photothermal ablation of tumors into a single multimodal nanoplatform exhibiting a significant cancer cell death.