Rapid quantification of fatty acids in plant oils and biological samples by LC-MS.

Analysis of fatty acids (FA) in food and biological samples such as blood is indispensable in modern life sciences. We developed a rapid, sensitive and comprehensive method for the quantification of 41 saturated and unsaturated fatty acids by means of LC-MS. Optimized chromatographic separation of isobaric analytes was carried out on a C8 reversed phase analytical column (100 × 2.1 mm, 2.6 µm core-shell particle) with a total run time of 15 min with back pressure lower than 300 bar. On an old triple quadrupole instrument (3200, AB Sciex), pseudo selected reaction monitoring mode was used for quantification of the poorly fragmenting FA, yielding limits of detection of 5-100 nM. Sample preparation was carried out by removal of phospholipids and triglycerides by solid-phase extraction (non-esterified fatty acids in oils) or saponification in iso-propanol (fatty acyls). This is not only a rapid strategy for quantification of fatty acyls, but allows the direct combination with the LC-MS-based analysis of fatty acid oxidation products (eicosanoids and other oxylipins) from the same sample. The concentrations of fatty acyls determined by means of LC-MS were consistent with those from GC-FID analysis demonstrating the accuracy of the developed method. Moreover, the method shows high precisions with a low intra-day (≤ 10% for almost all fatty acids in plasma and ≤ 15% in oils) and inter-day as well as inter-operator variability (< 20%). The method was successfully applied on human plasma and edible oils. The possibility to quantify non-esterified fatty acids in samples containing an excess of triacylglycerols and phospholipids is a major strength of the described approach allowing to gain new insights in the composition of biological samples.

Large multiresidue analysis of pesticides in edible vegetable oils by using efficient solid-phase extraction sorbents based on quick, easy, cheap, effective, rugged and safe methodology followed by gas chromatography-tandem mass spectrometry.

The aim of this research was to adapt the QuEChERS method for routine pesticide multiresidue analysis in edible vegetable oil samples using gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). Several clean-up approaches were tested: (a) D-SPE with Enhanced Matrix Removal-Lipid (EMR-Lipid™); (b) D-SPE with PSA; (c) D-SPE with Z-Sep; (d) SPE with Z-Sep. Clean-up methods were evaluated in terms of fat removal from the extracts, recoveries and extraction precision for 213 pesticides in different matrices (soybean, sunflower and extra-virgin olive oil). The QuEChERS protocol with EMR-Lipid d-SPE provided the best reduction of co-extracted matrix compounds with the highest number of pesticides exhibiting mean recoveries in the 70-120% range, and the lowest relative standard deviations values (4% on average). A simple and rapid (only 5min) freeze-out step with dry ice (CO2 at -76°C) prior to d-SPE clean-up ensured much better removal of co-extracted matrix compounds in compliance of the necessity in routine analysis. Procedural Standard Calibration was established in order to compensate for recovery losses of certain pesticides and possible matrix effects. Limits of quantification were 10µgkg(-1) for the majority of the pesticides. The modified methodology was applied for the analysis of different 17 oil samples. Fourteen pesticides were detected with values lower than MRLs and their concentration ranged between 10.2 and 156.0µgkg(-1).

Cost-effective imprinting combining macromolecular crowding and a dummy template for the fast purification of punicalagin from pomegranate husk extract.

The combination of molecular crowding and virtual imprinting was employed to develop a cost-effective method to prepare molecularly imprinted polymers. By using linear polymer polystyrene as a macromolecular crowding agent, an imprinted polymer recognizable to punicalagin had been successfully synthesized with punicalin as the dummy template. The resulting punicalin-imprinted polymer presented a remarkable selectivity to punicalagin with an imprinting factor of 3.17 even at extremely low consumption of the template (template/monomer ratio of 1:782). In contrast, the imprinted polymer synthesized without crowding agent, did not show any imprinting effect at so low template amount. The imprinted polymers made by combination of molecular crowding and virtual imprinting can be utilized for the fast separation of punicalagin from pomegranate husk extract after optimizing the protocol of solid-phase extraction with the recovery of 85.3 ± 1.2%.

Exploitation of FTA cartridges for the sampling, long-term storage, and DNA-based analyses of plant-parasitic nematodes.

The use of DNA-based analyses in molecular plant nematology research has dramatically increased over recent decades. Therefore, the development and adaptation of simple, robust, and cost-effective DNA purification procedures are required to address these contemporary challenges. The solid-phase-based approach developed by Flinders Technology Associates (FTA) has been shown to be a powerful technology for the preparation of DNA from different biological materials, including blood, saliva, plant tissues, and various human and plant microbial pathogens. In this work, we demonstrate, for the first time, that this FTA-based technology is a valuable, low-cost, and time-saving approach for the sampling, long-term archiving, and molecular analysis of plant-parasitic nematodes. Despite the complex structure and anatomical organization of the multicellular bodies of nematodes, we report the successful and reliable DNA-based analysis of nematode high-copy and low-copy genes using the FTA technology. This was achieved by applying nematodes to the FTA cards either in the form of a suspension of individuals, as intact or pestle-crushed nematodes, or by the direct mechanical printing of nematode-infested plant tissues. We further demonstrate that the FTA method is also suitable for the so-called "one-nematode-assay", in which the target DNA is typically analyzed from a single individual nematode. More surprisingly, a time-course experiment showed that nematode DNA can be detected specifically in the FTA-captured samples many years after initial sampling occurs. Collectively, our data clearly demonstrate the applicability and the robustness of this FTA-based approach for molecular research and diagnostics concerning phytonematodes; this research includes economically important species such as the stem nematode (Ditylenchus dipsaci), the sugar beet nematode (Heterodera schachtii), and the Northern root-knot nematode (Meloidogyne hapla).

Pipette tip solid-phase extraction and ultra-performance liquid chromatography/mass spectrometry based rapid analysis of picrosides from Picrorhiza scrophulariiflora.

Pipette tip solid-phase extraction (PT-SPE) is a technique popular in sample preparation of biological fluids and protein hydrolysates. In this study, we developed a microtechnic using a pipette tip packed with C18 as sorbent for extraction and purification of bioactive compounds, picroside-I, II and III, in crude herbal extracts from Picrorhiza scrophulariiflora (P. scrophulariiflora). Compared to conventional SPE, PT-SPE is fast, easy to operate, and the tools are very accessible (pipette tip and tube, without expensive SPE set-up). Moreover, it is also cost-effective because significant amount of sorbent and solvents can be saved. The eluate was analyzed by ultra-performance liquid chromatography and tandem mass spectrometry (UPLC-MS/MS). Afterwards, the method was fully validated and the results demonstrated that the PT-SPE-UPLC-MS/MS method is an excellent technique for analysis of the herbal medicine. Finally, this PT-SPE-UPLC-MS/MS strategy was successfully applied to analyze the crude extracts from P. scrophulariiflora samples within 10min (2min for PT-SPE and 8min for UPLC), 3.5mL solvents (including water, 0.3mL for PT-SPE and 3.2mL for UPLC), and 2mg C18 sorbent for each sample. We believe this method to be very practical and, in particular, to be suitable for widespread herbal medicine analysis.

Dispersive solid-phase extraction cleanup combined with accelerated solvent extraction for the determination of carbamate pesticide residues in Radix Glycyrrhizae samples by UPLC-MS-MS.

Dispersive solid-phase extraction (DSPE) cleanup combined with accelerated solvent extraction (ASE) is described here as a new approach for the extraction of carbamate pesticides in Radix Glycyrrhizae samples prior to UPLC-MS-MS. In the DSPE-ASE method, 15 carbamate pesticides were extracted from Radix Glycyrrhizae samples with acetonitrile by the ASE method at 60 °C with a 5 min heating time and two static cycles. Cleanup of a 1 mL aliquot of the extract by the DSPE method used 20 mg PSA (primary secondary amine), 50 mg Al(2)O(3)-N, and 20 mg GCB (graphitized carbon black) (as cleanup sorbents) under the determined optimum conditions. The linearity of the method was in the range of 10 to 200 ng/mL with correlation coefficients (r(2)) of more than 0.996. The limits of detection were approximately 0.2 to 5.0 µg/kg. The method was successfully used for the analysis of target pesticides in Radix Glycyrrhizae samples. The recoveries of the carbamate pesticides at the spiking levels of 50, 100, and 200 µg/kg ranged from 79.7% to 99.3% with relative standard deviations lower than 10%. This multi-residue analytical method allows for a rapid, efficient, sensitive and reliable determination of target pesticides in Radix Glycyrrhizae and other medicinal herbs.