Effect of pectin on the crystallization of strontium substituted HA for bone reconstruction application.

The biomacropolymers of bone extracellular matrix (ECM) guide the growth of hydroxyapatite (HA) with various ionic substitutions. Pectin, a plant polysaccharide with chemical similarities to ECM, was investigated for its potential to promote the crystallization of strontium-substituted HA (SH). The influence of pectin (0.5 and 1.0 wt%) on the in situ mineralization of SH (10 and 30 mol% calcium substitution with strontium) was studied. The preferential affinity of pectin to strontium over calcium favoured the incorporation of strontium in apatite, decreased crystal size (18.85-26.22 nm) and retained more pectin residues (8-16%). The residual pectin strongly interacted with small SH particles, resulting in high microhardness (0.43-0.85 GPa) and high surface charge (-32.1 to -30.3 mV), while weak interaction with large HA particles resulted in low microhardness (0.15-0.25 GPa) and low surface charge (-35.4 to -34.6 mV). The in vitro cellular study using human osteoblast-like MG-63 cells demonstrated that inorganic size and material crystallinity play a vital role in regulating osteogenesis. The study suggests that the synchronization of low pectin concentration (0.5 wt%) and high strontium substitution in HA (30 mol%) offers the desired microhardness and in vitro osteogenic properties to emulate natural bone.

Fabrication of strontium carbonate-based composite bioceramics as potential bone regenerative biomaterials.

Strontium carbonate (SrC) bioceramics are proposed as potential biomaterials to efficaciously repair the bone defects. However, the development of SrC bioceramics is restricted by their intrinsic low mechanical strength. In this study, SrC-based composite bioceramics (SrC-SrP) were fabricated by incorporating strontium-containing phosphate glass (SrP). The results indicated that aside from the main crystalline phase SrC, new compounds were generated in the SrC-SrP bioceramics. Incorporating 10 wt% SrP promoted densification, thus dramatically improving compressive strength of SrC-SrP bioceramics. The SrC-SrP bioceramics facilitated apatite precipitation on their surface, and sustainedly released strontium, phosphorus and sodium ions. Compared with the well-known ß-tricalcium phosphate bioceramics, the SrC-SrP bioceramics with certain amounts of SrP enhanced proliferation, alkaline phosphatase activity and osteogenesis-related gene expressions of mouse bone mesenchymal stem cells. The SrC-SrP bioceramics with appropriate constituent can serve as novel bone regenerative biomaterials.

Narrow-Band Red-Emitting Phosphors with High Color Purity, Trifling Thermal and Concentration Quenching for Hybrid White LEDs and Li3Y3BaSr(MoO4)8:Sm3+, Eu3+-Based Deep-Red LEDs for Plant Growth Applications.

Trivalent europium-based monochromatic red light-emitting phosphors are an essential component to realize high-performance smart lighting devices; however, the concentration and thermal quenching restrict their usage. Here, we report a series of efficient Eu3+-substituted Li3Y3BaSr(MoO4)8 red-emitting phosphors based on a stratified scheelite structure with negligible concentration and thermal quenching. All of the host and phosphor compositions crystallize in monoclinic crystal structure (space group C2/c). All of the phosphor compositions produce narrow-band red emission (FWHM ∼6 nm), which is highly apparent to the human eyes, and lead to exceptional chromatic saturation of the red spectral window. Concurrently, detailed investigations were carried out to comprehend the concentration and thermal quenching mechanism. Absolute quantum yields as high as 88.5% were obtained for Li3Y0.3Eu2.7BaSr(MoO4)8 phosphor with virtuous thermal stability (at 400 K, retaining 87% of its emission intensity). The light-emitting diodes were constructed by coupling Li3BaSrY0.3Eu2.7(MoO4)8 red phosphor with a near-UV LED chip (395 nm) operated at 20 mA forward bias, and the hybrid white LED (an organic yellow dye + red Li3Y3BaSr(MoO4)8:Eu3+ phosphor integrated with an NUV LED chip) showed a low CCT (6645 K), high CRI (83) values, and CIE values of x = 0.303; y = 0.368, which indicated that the synthesized phosphors can be a suitable red component for white LEDs. In addition, we have systematically investigated the Sm3+ and Sm3+, Eu3+ activation in Li3Y3BaSr(MoO4)8 to display the latent use of the system in plant growth applications and establish that the phosphor exhibits orange red emission with an intense deep-red emission (645 nm (4G5/2 → 6H9/2)). The phytochrome (Pr) absorption spectrum well matched the fabricated deep-red LED (by integrating a NUV LED + Li3Y3BaSr(MoO4)8:Sm3+ and Eu3+ phosphor) spectral lines.

Synthesis, Characterization, Antibacterial Properties, and In Vitro Studies of Selenium and Strontium Co-Substituted Hydroxyapatite.

In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO32-) in HA, strontium (Sr2+) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell-material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.

Insight into chitosan/mesoporous silica nanocomposites as eco-friendly adsorbent for enhanced retention of U (VI) and Sr (II) from aqueous solutions and real water.

The chitosan chains were integrated with MCM-48 mesoporous silica in an eco-friendly composite (CH/MCM-48) of enhanced adsorption capacity. The prepared CH/MCM-48 composite was applied in systematic retention of U (VI) as well as Sr (II) ions from water as the commonly detected radioactive pollutants. It displayed promising retention capacities of 261.3 mg/g and 328.6 mg/g for U (VI) and Sr (II) considering the equilibrium time interval that was identified after 420 min. The composite showed the kinetic behavior of the Pseudo-First order model and the isotherm properties of the Langmuir assumption. The thermodynamic assessment of the reactions validated the retention of both U (VI) and Sr (II) ions by spontaneous, favorable, and exothermic reactions. Based on the theoretical values of entropy (-5.94 kJ mol-1 (U (VI)) and -2.93 kJ mol-1 (Sr (II))), Gibbs free energy (less than 20 kJ mol-1), and Gaussian energy (5.77 kJ mol-1 (U (VI)) and 4.56 kJ mol-1 (Sr (II))) the uptake processes are related to physical adsorption reactions. The CH/MCM-48 composite is of significant recyclability and showed considerable affinities for the studied radioactive ions even in the presence of other metal ions (Cd (II), Pb (II), Zn (II), and Co (II)).

Nanofibrous scaffolds ofϵ-polycaprolactone containing Sr/Se-hydroxyapatite/graphene oxide for tissue engineering applications.

For wound healing applications, a scaffold of biocompatible/porous networks is crucial to support cell proliferation and spreading. Therefore,ϵ-polycaprolactone (PCL) nanofibrous scaffolds containing co-dopants of strontium/selenium in hydroxyapatite (HAP) were modified with different contributions of graphene oxide (GO) via the laser ablation technique. The obtained compositions were investigated using XRD, TEM and FESEM. It was evident that fiber diameters were in the range of 0.15-0.30µm and 0.35-0.83µm at the lowest and highest concentration of GO respectively, while the maximum height of the roughness progressed to 393 nm. The toughness behavior was promoted from 5.77 ± 0.21 to 9.16 ± 0.29 MJ m-3upon GO from the lowest to the highest contribution, while the maximum strain at break reached 148.1% ± 0.49% at the highest concentration of GO. The cell viability indicated that the fibrous scaffold was biocompatible. The investigation of the HFB4 cell attachments towards the fibrous compositions showed that with the increase of GO, cells tended to grow intensively through the scaffolds. Furthermore, the proliferation of cells was observed to be rooted in the porous structure and spreading on the surface of the scaffold. This progression of cells with an increase in GO content may provide a simple strategy not only to enhance the mechanical properties, but also to manipulate a nanofibrous scaffold with proper behaviors for biomedical applications.

Complexation of Injectable Biphasic Calcium Phosphate with Phosphoserine-Presenting Dendrons with Enhanced Osteoregenerative Properties.

Injectable biphasic calcium phosphates have been proposed as a solution in the treatment of a range of clinical applications including as fillers in the augmentation of osteoporotic bone. To date, various biodegradable natural or synthetic organics have been used as a polymer component of bone materials to increase their cohesiveness. Herein, a novel bone material was developed combining osteoconductive biphasic calcium phosphate (BCP) nanoparticles with phosphoserine-tethered generation 3 poly(epsilon-lysine) dendron (G3-K PS), a class of hyperbranched peptides previously shown to induce biomineralization and stem cell osteogenic differentiation. Strontium was also incorporated into the BCP nanocrystals (SrBCP) to prevent bone resorption. Within 24 h, an antiwashout behavior was observed in G3-K PS-integrated pure BCP group (BCPG3). Moreover, both in vitro tests by relevant cell phenotypes and an in vivo tissue regeneration study by an osteoporotic animal bone implantation showed that the integration of G3-K PS would downregulate Cxcl9 gene and protein expressions, thus enhancing bone regeneration measured as bone mineral density, new bone volume ratio, and trabecular microarchitectural parameters. However, no synergistic effect was found when Sr was incorporated into the BCPG3 bone pastes. Notably, results indicated a concomitant reduction of bone regeneration potential assessed as reduced Runx2 and PINP expression when bone resorptive RANKL and CTX-I levels were reduced by Sr supplementation. Altogether, the results suggest the potential of injectable BCPG3 bone materials in the treatment of osteoporotic bone defects.

Zero-concentration quenching: a novel Eu3+ based red phosphor with non-layered crystal structure for white LEDs and NaSrY(MoO4)3:Sm3+ based deep-red LEDs for plant growth.

Oxide based highly efficient narrow band red emitting phosphors are still a bottleneck in white LED applications. Trivalent europium ion based phosphors could be a better choice, however their weak oscillator strength restricts their use in white light emitting diodes (LEDs). Herein, we report a novel red emitting NaSrEu(MoO4)3 (NSEuM) phosphor with zero concentration quenching (non-layered crystal structure). The phosphors (NaSrY1-xEux(MoO4)3, x = 0.1-1, in increments of 0.1) were synthesized through a traditional solid-state reaction and their phase formations were analyzed by powder X-ray diffraction (PXRD) followed by Rietveld refinement. Under 395 nm excitation, all the phosphors showed sharp emission at 616 nm (full width at half maximum, FWHM ∼4-5 nm) owing to the 5D0→7F2 electric dipole transition of the Eu3+ ion. A concentration dependent photoluminescence (PL) study revealed that there is no concentration quenching of the systems, leading to them having superior emission characteristics over those of commercial red phosphors as well as a reported Eu3+ phosphor with a layered structure. The color purity of the synthesized phosphor was observed to be 96.32% and it shows excellent thermal stability at 423 K, retaining 64.6% of the emission intensity of its initial room temperature. The NSEuM phosphor shows a high absolute quantum yield of 79.7%. Besides this, a red LED (near UV (NUV) LED chip with the NaSrEu(MoO4)3 phosphor) as well as a hybrid white LED (NUV LED chip with an organic yellow dye + red NSEuM phosphor) were fabricated and their optical properties were studied. After the inclusion of the red phosphor in the hybrid white LED, the color rendering index (CRI)/correlated color temperature (CCT) were improved significantly (60/9333 K vs. 79/6004 K, respectively). In addition, to show the potential use of the system in plant growth application, we systematically investigated the Sm3+ activation in NaSrY(MoO4)3 and found that the phosphor shows orange red emission with an intense deep red emission (645 nm (4G5/2→6H9/2)). We fabricated a hybrid red/deep red LED by integrating a NUV LED with a mixed Sm3+ and Eu3+ phosphor and the spectral lines were well matched with the phytochrome (Pr) absorption spectrum. The presently investigated phosphor showed potential in a white LED as well as a deep red/orange-red LED for plant growth.

In vitro effects of the co-release of icariin and strontium from bioactive glass submicron spheres on the reduced osteogenic potential of rat osteoporotic bone marrow mesenchymal stem cells.

Osteoporosis is a metabolic disease that affects bone tissue and is highly associated with bone fractures. Typical osteoporosis fracture treatments, such as bisphosphonates and hormone replacement, present important challenges because of their low bioavailability on the site of action. Options to overcome this issue are systems for the local release of therapeutic agents such as bioactive glasses containing therapeutic molecules and ions. These agents are released during the dissolution process, combining the drugs and ion therapeutic effects for osteoporosis treatment. Among the therapeutic agents that can be applied for bone repair are strontium (Sr) ion and phytopharmaceutical icariin, which have shown potential to promote healthy bone marrow stem cells osteogenic differentiation, increase bone formation and prevent bone loss. Submicron Sr-containing bioactive glass mesoporous spheres with sustained ion release capacity were obtained. Icariin was successfully incorporated into the particles, and the glass composition influenced the icariin incorporation efficiency and release rates. In this work, for the first time, Sr and icariin were incorporated into bioactive glass submicron mesoporous spheres and the in vitro effects of the therapeutic agents release were evaluated on the reduced osteogenic potential of rat osteoporotic bone marrow mesenchymal stem cells, and results showed an improvement on the reduced differentiation potential.

Development of long-persistent photoluminescent epoxy resin immobilized with europium (II)-doped strontium aluminate.

A facile approach for possible industrial production of long-persistent phosphorescence, continuing to emitting light for a long time period, smart cobbles were developed toward photoluminescent hard surfaces. The inorganic strontium aluminium oxide pigment doped with rare earth elements was added to a synthetic organic epoxy in the presence of polyamine as a hardener to make a phosphor-loaded viscous fluid that can then be hardened in a few minutes. The transparency of the solid cobbles can be accomplished easily using homogeneous dispersion of the phosphor in the epoxy resin fluid before the addition of a hardener to avoid pigment aggregation. This pigment-epoxy formula can be easily applied industrially onto flagstones surfaces under ambient conditions. The photoluminescent cobblestones demonstrated an optimum excitation wavelength at 366 nm and an emission band at 521 nm with a long-persistent phosphorescence cobble surface. The development of a translucent white colour under normal daylight, bright green under ultraviolet (UV) irradiation, bright white colour after 30 sec in the dark, and phosphorescent green colour after 75 min in the dark was indicated using Commission Internationale de l'Eclairage (CIE) Laboratory coloration measurements. The luminescent hard composite cobble exhibited a highly durable and reversible long-persistent phosphorescence light. Photoluminescence, morphological, and hardness properties as well as the elemental composition of the prepared cobbles were explored.

Antibacterial, angiogenic, and osteogenic activities of Ca, P, Co, F, and Sr compound doped titania coatings with different Sr content.

Titanium implants are often combined with microporous titania coatings simultaneously doped with various elements to enhance their antibacterial, angiogenic and osteogenic activities. To evaluate how Sr doping levels affect properties of titania coatings simultaneously doped with Ca, P, Co and F (TiCPCF coatings), we prepared coatings with Sr contents equal to 6, 11 and 18 wt% (TiCPCF-S6, TiCPCF-S11 and TiCPCF-S18, respectively) using micro-arc oxidation of titanium. Sr presence in TiCPCF coatings did not affect their phase compositions, microstructure, surface wettability, roughness, and adhesion to titanium. Antibacterial, angio- and osteo-genic activities of all the coatings were evaluated. Sr incorporation improved mesenchymal stem cell proliferation, osteogenic differentiation and implant osseointegration. TiCPCF-S11 showed the most optimum Sr content judging by its enhanced osteogenic activity. While Sr incorporation did not weaken angiogenic and antibacterial abilities of TiCPCF. Thus TiCPCF-S11 coating is a very strong candidate to be used as a next-generation bone implant material.

THERMOLUMINESCENCE SPECTRA AND DOSE RESPONSES OF SrSO4 PHOSPHORS DOPED WITH RARE EARTHS (Eu, Dy, Tm) AND PHOSPHORUS.

The thermoluminescence (TL) spectra and dose responses of strontium sulphate doped with rare earth ions show that the SrSO4:Eu2+ phosphor might reasonably be assumed a isoelectronic trap sample which has unique TL characteristics: there is only one obvious glow peak at 385 nm, 489 K in the TL 3D emission spectra and its TL dose response is linear-sublinear. However, there are several elementary glow peaks in the TL 3D emission spectra and their TL dose responses are linear-supralinear for SrSO4:RE3+ (RE = Dy, Tm). These TL peaks occurred from low to high temperature indicate that the traps are distributed in different energy levels. When a suitable amount of other impurities co-doped into these SrSO4:RE3+, such as phosphorus, the relative intensities of these elementary glow peaks are changed significantly, especially the TL peak ~500 K is enhanced while the peaks at lower temperature are suppressed. The enhanced peak of SrSO4:RE3+,P is attributed to the deep traps. Their dose responses remain in nonlinearity when co-doped phosphorus. The above results and the luminescence properties of other sulphate doped rare earths impurities illustrate that the TL characteristics depend on the structure of defect complexes which can be assumed the basic elements in the TL multi-stage processes.

Formation of stable strontium-rich amorphous calcium phosphate: Possible effects on bone mineral.

Bone, tooth enamel, and dentin accumulate Sr2+, a natural trace element in the human body. Sr2+ comes from dietary and environmental sources and is thought to play a key role in osteoporosis treatments. However, the underlying impacts of Sr2+on bone mineralization remain unclear and the use of synthetic apatites (which are structurally different from bone mineral) and non-physiological conditions have led to contradictory results. Here, we report on the formation of a new Sr2+-rich and stable amorphous calcium phosphate phase, Sr(ACP). Relying on a bioinspired pathway, a series of Sr2+ substituted hydroxyapatite (HA) that combines the major bone mineral features is depicted as model to investigate how this phase forms and Sr2+ affects bone. In addition, by means of a comprehensive investigation the biomineralization pathway of Sr2+ bearing HA is described showing that not more than 10 at% of Sr2+, i.e. a physiological limit incorporated in bone, can be incorporated into HA without phase segregation. A combination of 31P and 1H solid state NMR, energy electron loss spectromicroscopy, transmission electron microscopy, electron diffraction, and Raman spectroscopy shows that Sr2+ introduces disorder in the HA culminating with the unexpected Sr(ACP), which co-exists with the HA under physiological conditions. These results suggest that heterogeneous Sr2+ distribution in bone is associated with regions of low structural organization. Going further, such observations give clues from the physicochemical standpoint to understand the defects in bone formation induced by high Sr2+ doses. STATEMENT OF SIGNIFICANCE: Understanding the role played by Sr2+ has a relevant impact in physiological biomineralization and provides insights for its use as osteoporosis treatments. Previous studies inspired by the bone remodelling pathway led to the formation of biomimetic HA in terms of composition, structures and properties in water. Herein, by investigating different atomic percentage of Sr2+ related to Ca2+ in the synthesis, we demonstrate that 10% of Sr2+ is the critical loads into the biomimetic HA phase; similarly to bone. Unexpectedly, using higher amount leads to the formation of a stable Sr2+-rich amorphous calcium phosphate phase that may high-dose related pathologies. Our results provide further understanding of the different ways Sr2+ impacts bone.

Human mesenchymal stem cells differentiate into an osteogenic lineage in presence of strontium containing bioactive glass nanoparticles.

While bioactive glass and ions released during its dissolution are known to stimulate osteoblast cells, the effect bioactive glass has on human stem cells is not clear. Here, we show that spherical monodispersed strontium containing bioactive nanoparticles (Sr-BGNPs) of composition 90.6 mol% SiO2, 5.0 mol% CaO, 4.4% mol% SrO (4.4%Sr-BGNPs) and 88.8 mol% SiO2, 1.8 mol% CaO, and 9.4 mol% SrO (9.4%Sr-BGNPs) stimulate bone marrow derived human stem cell (hMSC) differentiation down an osteogenic pathway without osteogenic supplements. The particles were synthesised using a modified StÓ§ber process and had diameters of 90 ±â€¯10 nm. Previous work on similar particles that did not contain Sr (80 mol% SiO2, 20 mol% CaO) showed stem cells did not differentiate when exposed to the particles. Here, both compositions of the Sr-BGNPs (up to concentration of 250 µg/mL) stimulated the early-, mid-, and late-stage markers of osteogenic differentiation and accelerated mineralisation in the absence of osteogenic supplements. Sr ions play a key role in osteogenic stem cell differentiation. Sr-BGNP dissolution products did not adversely affect hMSC viability and no significant differences in viability were measured between each particle composition. Confocal and transmission electron microscopy (TEM) demonstrated that monodispersed Sr-BGNPs were internalised and localised within vesicles in the cytoplasm of hMSCs. Degradation of particles inside the cells was observed, whilst maintaining effective cations (Ca and Sr) in their silica network after 24 h in culture. The uptake of Sr-BGNPs by hMSCs was reduced by inhibitors of specific routes of endocytosis, indicating that the Sr-BGNPs uptake by hMSCs was probably via mixed endocytosis mechanisms. Sr-BGNPs have potential as injectable therapeutic devices for bone regeneration or treatment of conditions such as osteoporosis, because of their ability deliver a sustained release of osteogenic inorganic cations, e.g. calcium (Ca) or and strontium (Sr), through particle degradation locally to cells. STATEMENT OF SIGNIFICANCE: Here, we show that 90 nm spherical strontium containing bioactive nanoparticles of stimulate bone marrow derived human stem cell (hMSC) differentiation down an osteogenic pathway without the use of osteogenic supplements. While bioactive glass and its dissolution products are known to promote excellent bone regeneration in vivo and to stimulate osteoblast cells to produce bone matrix in vitro, their effect on human stem cells is not clear. Previously our nanoparticles that contained only SiO2 and CaO did not provoke human bone marrow or adipose derived stem cell differentiation.

Study on MgxSr3-x(PO4)2 bioceramics as potential bone grafts.

Magnesium (Mg) and strontium (Sr), which are essential nutrient elements in the natural bone, positively affect the osteogenic activity even in wide ranges of ion concentrations. However, it remains unknown whether magnesium-strontium phosphates [MgxSr3-x(PO4)2] are potential bone grafts for accelerating bone regeneration. Herein, a serial of MgxSr3-x(PO4)2, including Mg3(PO4)2, Mg2Sr(PO4)2, Mg1.5Sr1.5(PO4)2, MgSr2(PO4)2 and Sr3(PO4)2, were synthesized using a solid-state reaction approach. The physicochemical properties and cell behaviors of MgxSr3-x(PO4)2 bioceramics were characterized and compared with the common bone graft ß-tricalcium phosphate (ß-TCP). The results indicated that various MgxSr3-x(PO4)2 bioceramics differed in compressive strength and in vitro degradation rate. All the MgxSr3-x(PO4)2 bioceramics had excellent biocompatibility. In contrast to ß-TCP, the MgxSr3-x(PO4)2 enhanced alkaline phosphatase activity of mouse bone mesenchymal stem cells (mBMSCs), and inhibited osteoclastogenesis-related gene expression of RAW264.7 cells, but did not enhance osteogenesis-related gene expression of mBMSCs which were treated with osteogenesis induction supplements. However, Mg3(PO4)2 stimulated osteogenesis-related gene expression of mBMSCs without the treatment of osteogenesis induction supplements. This work contributes to the design of bone graft and may open a new avenue for the bone regeneration field.

Genomic and Strontium Isotope Variation Reveal Immigration Patterns in a Viking Age Town.

The impact of human mobility on the northern European urban populations during the Viking and Early Middle Ages and its repercussions in Scandinavia itself are still largely unexplored. Our study of the demographics in the final phase of the Viking era is the first comprehensive multidisciplinary investigation that includes genetics, isotopes, archaeology, and osteology on a larger scale. This early Christian dataset is particularly important as the earlier common pagan burial tradition during the Iron Age was cremation, hindering large-scale DNA analyses. We present genome-wide sequence data from 23 individuals from the 10th to 12th century Swedish town of Sigtuna. The data revealed high genetic diversity among the early urban residents. The observed variation exceeds the genetic diversity in distinct modern-day and Iron Age groups of central and northern Europe. Strontium isotope data suggest mixed local and non-local origin of the townspeople. Our results uncover the social system underlying the urbanization process of the Viking World of which mobility was an intricate part and was comparable between males and females. The inhabitants of Sigtuna were heterogeneous in their genetic affinities, probably reflecting both close and distant connections through an established network, confirming that early urbanization processes in northern Europe were driven by migration.

In vitro evaluation of MgSr and MgCaSr alloys via direct culture with bone marrow derived mesenchymal stem cells.

Magnesium (Mg) and its alloys have been widely investigated as the most promising biodegradable metals to replace conventional non-degradable metals for temporary medical implant applications. New Mg alloys have been developed for medical applications in recent years; and the concept of alloying Mg with less-toxic elements have aroused tremendous interests due to the promise to address the problems associated with rapid degradation of Mg without compromising its cytocompatibility and biocompatibility. Of particular interests for orthopedic/spinal implant applications are the additions of calcium (Ca) and strontium (Sr) into Mg matrix because of their beneficial properties for bone regeneration. In this study, degradation and cytocompatibility of four binary MgSr alloys (Mg-xSr, x = 0.2, 0.5, 1 and 2 wt%) and four ternary MgCaSr alloys (Mg-1Ca-xSr, x = 0.2, 0.5, 1 and 2 wt%) were investigated and compared via direct culture with bone marrow-derived mesenchymal stem cells (BMSCs). The influence of the alloy composition on the degradation rates were studied and compared. Moreover, the cellular responses to the binary MgSr alloys and the ternary MgCaSr alloys were comparatively evaluated; and the critical factors influencing BMSC behaviors were discussed. This study screened the degradability and in vitro cytocompatibility of the binary MgSr alloys and the ternary MgCaSr alloys. Mg-1Sr, Mg-1Ca-0.5Sr and Mg-1Ca-1Sr alloys are recommended for further in vivo studies toward clinical translation due to their best overall performances in terms of degradation and cytocompatibility among all the alloys studied in the present work. STATEMENT OF SIGNIFICANCE: Traditional Mg alloys with slower degradation often contain aluminum or rare earth elements as alloying components, which raised safety and regulatory concerns. To circumvent unsafe elements, nutrient elements such as calcium (Ca) and strontium (Sr) were selected to create Mg-Sr binary alloys and Mg-Ca-Sr ternary alloys to improve the safety and biocompatibility of bioresorbable Mg alloys for medical implant applications. In this study, in vitro degradation and cellular responses to four binary Mg-xSr alloys and four ternary Mg-1Ca-xSr alloys with increasing Sr content (up to 2 wt%) were evaluated in direct culture with bone marrow derived mesenchymal stem cells (BMSCs). The roles of Sr and Ca in tuning the alloy microstructure, degradation behaviors, and BMSC responses were collectively compared in the BMSC direct culture system for the first time. The most promising alloys were identified and recommended for further in vivo studies toward clinical translation.

A thermoresponsive, citrate-based macromolecule for bone regenerative engineering.

There is a need in orthopaedic and craniomaxillofacial surgeries for materials that are easy to handle and apply to a surgical site, can fill and fully conform to the bone defect, and can promote the formation of new bone tissue. Thermoresponsive polymers that undergo liquid to gel transition at physiological temperature can potentially be used to meet these handling and shape-conforming requirements. However, there are no reports on their capacity to induce in vivo bone formation. The objective of this research was to investigate whether the functionalization of the thermoresponsive, antioxidant macromolecule poly(poly-ethyleneglycol citrate-co-N-isopropylacrylamide) (PPCN), with strontium, phosphate, and/or the cyclic RGD peptide would render it a hydrogel with osteoinductive properties. We show that all formulations of functionalized PPCN retain thermoresponsive properties and can induce osteodifferentiation of human mesenchymal stem cells without the need for exogenous osteogenic supplements. PPCN-Sr was the most osteoinductive formulation in vitro and produced robust localized mineralization and osteogenesis in subcutaneous and intramuscular tissue in a mouse model. Strontium was not detected in any of the major organs. Our results support the use of functionalized PPCN as a valuable tool for the recruitment, survival, and differentiation of cells critical to the development of new bone and the induction of bone formation in vivo. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1743-1752, 2018.

Leaching Characteristics of Calcium and Strontium from Phosphogypsum Under Acid Rain.

Phosphogypsum (PG) stored close to phosphorus chemical plants has caused worldwide environmental problems. Column leaching experiments were conducted to evaluate Ca and Sr leaching from PG under simulated acid rain at pH levels typical for rain in the study region (Shifang, China). High concentrations of Ca and Sr in leachates in the first five leaching events could pollute the soil and groundwater around the PG. Leachates pH was lower than and had no correlation with simulated rain pH. No correlations between simulated rain pH and cumulative Ca and Sr content in leachates were noted. Around 2.0%-2.2% of Ca and 0.5%-0.6% of Sr were leached out from PG by the simulated summer rainfall in Shifang. Electrical conductivity values, Ca and Sr concentrations at bottom sections of PG columns were higher than those of top sections, while pH values showed a reverse trend. More precautions should be taken to protect the environment around PG stacks.

Enhancement of the luminescence properties of Sr3 (PO4 )2 :Dy3+ ,Li+ white-light-emitting phosphors by charge compensator Li+ co-doping.

Sr3 (PO4 )2 :Dy3+ ,Li+ phosphors were prepared using a simple high temperature solid method for luminescence enhancement. The structures of the as-prepared samples agreed well with the standard phase of Sr3 (PO4 )2 , even when Dy3+ and Li+ were introduced. Under ultraviolet excitation at 350 nm, the Sr3 (PO4 )2 :Dy3+ sample exhibited two emission peaks at 483 nm and 580 nm, which were due to the 4 F9/2  â†’ 6 H15/2 and 4 F9/2  â†’ 6 H13/2 transitions of Dy3+ ions, respectively. A white light was fabricated using these two emissions from the Sr3 (PO4 )2 :Dy3+ phosphors. The luminescence properties of Sr3 (PO4 )2 :Dy3+ ,Li+ phosphors, including emission intensity and decay time, were improved remarkably with the addition of Li+ as the charge compensator, which would promote their application in near-ultraviolet excited white-light-emitting diodes.