Nose-to-brain delivery of borneol modified tanshinone IIA nanoparticles in prevention of cerebral ischemia/reperfusion injury.

Targeted treatment of cerebral ischemia/reperfusion injury (CIRI) remains a problem due to the difficulty in drug delivery across the blood-brain barrier (BBB). In this study, we developed Bo-TSA-NP, a novel tanshinone IIA (TSA) loaded nanoparticles modified by borneol, which has long been proved with the ability to enhance other drugs' transport across the BBB. The Bo-TSA-NP, with a particle size of about 160 nm, drug loading of 3.6%, showed sustained release and P-glycoprotein (P-gp) inhibition property. It demonstrated a significantly higher uptake by 16HBE cells in vitro through the clathrin/caveolae-mediated endocytosis and micropinocytosis. Following intranasal (IN) administration, Bo-TSA-NP significantly improved the preventive effect on a rat model of CIRI with improved neurological scores, decreased cerebral infarction areas and a reduced content of malondialdehyde (MDA) and increased activity of superoxide dismutase (SOD) in rat brain. In conclusion, these results indicate that Bo-TSA-NP is a promising nose-to-brain delivery system that can enhance the prevention effect of TSA on CIRI.

Tracking the Behavior of Monoclonal Antibody Product Quality Attributes Using a Multi-Attribute Method Workflow.

The multi-attribute method (MAM) is a liquid chromatography-mass spectrometry based method that is used to directly characterize and monitor many product quality attributes and impurities on biotherapeutics, most commonly at the peptide level. It utilizes high-resolution accurate mass spectral data which are analyzed in an automated fashion. MAM is a promising approach that is intended to replace or supplement several conventional assays with a single LC-MS analysis and can be implemented in a Current Good Manufacturing Practice environment. MAM provides accurate site-specific quantitation information on targeted attributes and the nontargeted new peak detection function allows to detect new peaks as impurities, modifications, or sequence variants when comparing to a reference sample. The high resolution MAM workflow was applied here for three independent case studies. First, to monitor the behavior of monoclonal antibody product quality attributes over the course of a 12-day cell culture experiment providing an insight into the behavior and dynamics of product attributes throughout the process. Second, the workflow was applied to test the purity and identity of a product through analysis of samples spiked with host cell proteins. Third, through the comparison of a drug product and a biosimilar with known sequence variants. The three case studies presented here, clearly demonstrate the robustness and accuracy of the MAM workflow that implies suitability for deployment in the regulated environment.

Stability Designs of Cell Membrane Cloaked Magnetic Carbon Nanotubes for Improved Life Span in Screening Drug Leads.

Convenient strategies to provide natural cell membranes (CMs)-camouflaged nanomaterials with enhanced stability would prompt the advancement of CMs-coated biomimetic technology and expand the application of these emerging nanomaterials. Herein, we have developed stability-enhanced CMs-camouflaged magnetic carbon nanotubes (MCNTs) to screen drug leads from traditional Chinese medicine (TCMs) that target membrane receptors. By modifying MCNTs with N-ethyl-N'-(3-(dimethylamino)propyl) carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS), the resulting covalent immobilized CMs-camouflaged MCNTs have improved stability, where the losing amount (20 mg g-1) was significantly decreased compared with that of the unimmobilized materials (40 mg g-1). The high expression ephrinb2/HEK293 cell lines were used to camouflage the EDC/NHS modified MCNTs (CMCNTs) to endow it with drug-screening sites. Moreover, with inherited properties from CMs, ephrinb2/HEK293 CMs-camouflaged CMCNTs possessed good binding capacity and selectivity, and three potential drug leads as mesaconine, deltaline, and 13-dehydroxyindine were screened from Aconitum carmichaeli Debx. The pharmacological assays indicated that mesaconine and 13-dehydroxyindine could inhibit cancer cell growth by targeting ephrinb2. As a result, this surface engineering method not only offers an insight into fabrication of stabilized CMs-coated nanomaterials but also inspires more brilliant work in the future and paves the way for the biomimetic functional modification of CNTs for a variety of applications.

On the use of acridinium indicators for the chemiluminescent determination of the total antioxidant capacity of dietary supplements.

Acridinium salts, due to their chemiluminogenic properties, have found several applications in biomedical analysis as labels and indicators, where the assessment of emission intensity is used for the end-point detection. This work presents the use of chemiluminescent indicators in the form of selected acridinium esters in order to determine the antioxidant properties of exemplary formulations, namely quercetin, vitamin C and the dietary supplement, Apiextract. The principle of measurements is based on a change in the kinetics of emission decay derived from the acridinium cations in alkaline solutions of hydrogen peroxide in the presence of an antioxidant (the analyte). The proposed system makes a beneficial alternative to related methods, which mostly rely on the assessment of emission efficiency and use the luminometric standard luminol - due to superior parameters of acridinium chemiluminescence, among others - high temporary emission efficiency. The features of the proposed method are manifested by a shorter time period of analysis and lower background signals associated with the environmental influences, as compared to typical approaches. The chromatographic (RP-HPLC) analyses of the substrates and products generated during chemiluminogenic oxidation of acridinium cations under assay conditions are also presented.

Chitosan coated calcium alginate beads for covalent immobilization of acrylamidase: Process parameters and removal of acrylamide from coffee.

This study reports on removal of acrylamide from roasted coffee by acrylamidase from Cupriavidus oxalaticus ICTDB921. Chitosan coated calcium alginate beads were functionalized with citric acid as nontoxic cross linker and activated by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) (1.66:1 w/w) for covalent immobilization of acrylamidase. The optimum beads were obtained using 5% sodium alginate, 1.5% chitosan, and 0.6 mol/L citric acid. The beads prepared at each step were characterized by FTIR and SEM. Coating of chitosan matrix on calcium alginate beads enhanced the mechanical stability over that of calcium alginate and/or chitosan. The immobilized acrylamidase showed optimum pH/temperature of 8.5/65 °C, improved pH/thermal/shelf stability, and retained 80% activity after four cycles. Haldane model could describe the degradation kinetics of acrylamide in batch study. In packed bed column, a bed height, feed flow rate and inlet acrylamide concentration of 20 cm, 1 mL/min, and 100 mg/L gave best results.

Salmonella Typhimurium Sensing Strategy Based on the Loop-Mediated Isothermal Amplification Using Retroreflective Janus Particle as a Nonspectroscopic Signaling Probe.

Loop-mediated isothermal amplification (LAMP) is a powerful gene amplification method, which has many advantages, including high specificity, sensitivity, and simple operation. However, quantitative analysis of the amplified target gene with the LAMP assay is very difficult. To overcome this limitation, we developed a novel biosensing platform for molecular diagnosis by integrating the LAMP method and retroreflective Janus particle (RJP) together. The final amplified products of the LAMP assay are dumbbell-shaped DNA structures, containing a single-stranded loop with two different sequences. Therefore, the concentration of the amplified products can be measured in a manner similar to the sandwich-type immunoassay. To carry out the sandwich-type molecular diagnostics using the LAMP product, two DNA probes, with complementary sequences to the loop-regions, were prepared and immobilized on both the sensing surface and the surface of the RJPs. When the amplified LAMP product was applied to the sensing surface, the surface-immobilized DNA probe hybridized to the loop-region of the LAMP product to form a double-stranded structure. When the DNA probe-conjugated RJPs were injected, the RJPs bound to the unreacted loop-region of the LAMP product. The number of RJPs bound to the loop-region of the LAMP product was proportional to the concentration of the amplified LAMP product, indicating that the concentration of the target gene can be quantitatively analyzed by counting the number of observed RJPs. Using the developed system, a highly sensitive and selective quantification of Salmonella was successfully performed with a detection limit of 102 CFU.

XPlex: An Effective, Multiplex Cross-Linking Chemistry for Acidic Residues.

Cross-linking/Mass spectrometry (XLMS) is a consolidated technique for structural characterization of proteins and protein complexes. Despite its success, the cross-linking chemistry currently used is mostly based on N-hydroxysuccinimide (NHS) esters, which react primarily with lysine residues. One way to expand the current applicability of XLMS into several new areas is to increase the number of cross-links obtainable for a target protein. We introduce a multiplex chemistry (denoted XPlex) that targets Asp, Glu, Lys, and Ser residues. XPlex can generate significantly more cross-links with reactions occurring at lower temperatures and enables targeting proteins that are not possible with NHS ester-based cross-linkers. We demonstrate the effectiveness of our approach in model proteins as well as a target Lys-poor protein, SalBIII. Identification of XPlex spectra requires a search engine capable of simultaneously considering multiple cross-linkers on the same run; to achieve this, we updated the SIM-XL search algorithm with a search mode tailored toward XPlex. In summary, we present a complete chemistry/computational solution for significantly increasing the number of possible distance constraints by mass spectrometry experiments, and thus, we are convinced that XPlex poses as a real complementary approach for structural proteomics studies.

Preparation of lipid nanoparticles with high loading capacity and exceptional gastrointestinal stability for potential oral delivery applications.

Exploitation of lipid nanoparticles for oral delivery of nutrients and drugs is limited by their poor stability under gastrointestinal tract and low loading capacity, unless a high concentration of synthetic surfactants is formulated. The main objective of present study is to design a series of new formulations for solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) that are suitable for potential oral delivery applications, using natural biopolymers, i.e. sodium caseinate (NaCas) as emulsifier and pectin as coating, with minimal addition of a synthetic surfactant, Tween 80. Effects of pectin coating, concentration of Tween 80, thermal treatment (80°C for 30min), as well as two chemical cross-linkers on the particulate characteristics, stability, encapsulation efficiency, controlled release and drying feasibility were comprehensively investigated. The intermolecular interactions and cross-linking reactions were studied using Fourier transform infrared spectroscopy. Tween 80 at 0.15% (w/v) together with 0.15% (w/v) NaCas was proved effective to obtain stable cross-linked pectin-coated SLN (PSLN) under 200nm with high loading capacity for curcumin, while NLC prepared under the same condition failed to pass storage stability test. The 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) cross-linked PSLN exhibited superior characteristics than glutaradehyde (GA) cross-linked PSLN, especially for the stability and controlled release under simulated gastrointestinal conditions, with curcumin studied as a model compound. The feasibility of both nano spray drying and freeze-drying technologies were both investigated to transform of colloidal lipid nanoparticles into dry powders. Our results demonstrated a novel strategy to prepare small and homogenous SLN with exceptional GI stability and high loading capacity as a potential oral delivery system.

Synthesis of ß-1,4-Linked Galactan Side-Chains of Rhamnogalacturonan†I.

The synthesis of linear- and (1→6)-branched ß-(1→4)-d-galactans, side-chains of the pectic polysaccharide rhamnogalacturonan I is described. The strategy relies on iterative couplings of n-pentenyl disaccharides followed by a late stage glycosylation of a common hexasaccharide core. Reaction with a covalent linker and immobilization on N-hydroxysuccinimide (NHS)-modified glass surfaces allows the generation of carbohydrate microarrays. The glycan arrays enable the study of protein-carbohydrate interactions in a high-throughput fashion, demonstrated herein with binding studies of mAbs and a CBM.

Hyaluronic acid co-functionalized gold nanoparticle complex for the targeted delivery of metformin in the treatment of liver cancer (HepG2 cells).

In this study, green synthesis of gold nanoparticles (AuNPs) was achieved using the extract of eggplant as a reducing agent. Hyaluronic acid (HA) serves as a capping and targeting agent. Metformin (MET) was successfully loaded on HA capped AuNPs (H-AuNPs) and this formulation binds easily on the surface of the liver cancer cells. The synthesized nanoparticles were characterized by UV-Vis spectrophotometer, HR-TEM, particle size analyser and zeta potential measurement. Toxicity studies of H-AuNPs in zebra fish confirmed the in vivo safety of the AuNPs. The in vitro cytotoxicity results showed that the amount of MET-H-AuNPs enough to achieve 50% inhibition (IC50) was much lower than free MET. Flow cytometry analysis showed the significant reduction in G2/M phase after treatment with MET-H-AuNPs, and molecular level apoptosis were studied using western blotting. The novelty of this study is the successful synthesis of AuNPs with a higher MET loading and this formulation exhibited better targeted delivery as well as increased regression activity than free MET in HepG2 cells.

Apamin-mediated actively targeted drug delivery for treatment of spinal cord injury: more than just a concept.

Faced with the complex medical challenge presented by spinal cord injuries (SCI) and considering the lack of any available curative therapy, the development of a novel method of delivering existing drugs or candidate agents can be perceived to be as important as the development of new therapeutic molecules. By combining three ingredients currently in clinical use or undergoing testing, we have designed a central nervous system targeted delivery system based on apamin-modified polymeric micelles (APM). Apamin, one of the major components of honey bee venom, serves as the targeting moiety, poly(ethylene glycol) (PEG) distearoylphosphatidylethanolamine (DSPE) serves as the drug-loaded material, and curcumin is used as the therapeutic agent. Apamin was conjugated with NHS (N-hydroxysuccinimide)-PEG-DSPE in a site-specific manner, and APM were prepared by a thin-film hydration method. A formulation comprising 0.5 mol % targeting ligand with 50 nm particle size showed strong targeting efficiency in vivo and was evaluated in pharmacodynamic assays. A 7-day treatment by daily intravenous administration of low doses of APM (corresponding to 5 mg/kg of curcumin) was performed. Significantly enhanced recovery and prolonged survival was found in the SCI mouse model, as compared to sham-treated groups, with no apparent toxicity. A single dose of apamin-conjugated polymers was about 700-fold lower than the LD50 amount, suggesting that APM and apamin have potential for clinical applications as spinal cord targeting ligand for delivery of agents in treatment of diseases of the central nervous system.

New series of avenanthramides in oat seed.

Avenanthramides are characteristic constituents of oat seeds. We analyzed the methanol extract of oat seeds by HPLC and detected three compounds 1, 2, and 3 eluted at retention times similar to avenanthramides. The three compounds were purified by column chromatography and HPLC. Spectroscopic analyses of 1, 2, and 3 suggested that they are amides of 4,5-dihydroxyanthranilic acid with caffeic, p-coumaric, and ferulic acids, respectively. Their identities were confirmed by comparing spectra and chromatographic behavior with compounds synthesized from 4,5-dihydroxyanthranilic acid and N-hyrdroxysuccinimide esters of hydroxycinnamic acids. LC-MS/MS analysis with multiple reaction monitoring showed that the amounts of 1, 2, and 3 were 16.5-26.9% of corresponding avenanthamides with 5-hydroxyanthranilic acid. Compounds 1, 2, and 3 showed stronger 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging activity than the corresponding avenanthramides with 5-hydroxyanthranilic acid, indicating the involvement of 4,5-dihydroxyanthranilic acid moiety in the scavenging of DPPH radicals.

A novel three-dimensional biosensor based on aluminum oxide: application for early-stage detection of human interleukin-10.

Immunosensors based on electrolyte-oxide-semiconductors (EOS) have been extensively researched over the last few decades. By electrochemical impedance spectroscopy (EIS) the specific molecular biorecognition of the antibody-antigen (Ab-Ag) can be detected providing an alternative quantitative system to immunoassay techniques. The electrochemical variations from a fabricated immunosensor can provide quantitative values for the analyte of interest at reduced costs and analysis time. In this context, a novel EOS substrate based on aluminum oxide (Al2O3) grown by atomic layer deposition on silicon was applied. The interaction between recombinant human (rh) interleukin-10 (IL-10) with the corresponding monoclonal antibody (mAb) for early cytokine detection of an anti-inflammatory response due to left ventricular assisted device implantation was studied. For this purpose, a 3D biosensor was composed of multi-walled carbon nanotubes with carboxylic acid functionalities (multi-walled carbon nanotubes-COOH) to increase the surface area for the range of human IL-10 detection. These were activated with N-hydroxysuccinimide and N-(3-dimethylaminopropyl)-N'-ethyl-carbodiimide hydrochloride for the immobilization of the anti-human IL-10 mAb. First, the interaction between the Ab and Ag was observed by fluorescence patterning to ensure that the biorecognition event was achievable. Then, EIS is explained for the quantification of commercial human IL-10 on this capacitance-based EOS macroimmuno-FET sensor.

A novel class of succinimide-derived negative allosteric modulators of metabotropic glutamate receptor subtype 1 provides insight into a disconnect in activity between the rat and human receptors.

Recent progress in the discovery of mGlu1 allosteric modulators has suggested the modulation of mGlu1 could offer possible treatment for a number of central nervous system disorders; however, the available chemotypes are inadequate to fully investigate the therapeutic potential of mGlu1 modulation. To address this issue, we used a fluorescence-based high-throughput screening assay to screen an allosteric modulator-biased library of compounds to generate structurally diverse mGlu1 negative allosteric modulator hits for chemical optimization. Herein, we describe the discovery and characterization of a novel mGlu1 chemotype. This series of succinimide negative allosteric modulators, exemplified by VU0410425, exhibited potent inhibitory activity at rat mGlu1 but was, surprisingly, inactive at human mGlu1. VU0410425 and a set of chemically diverse mGlu1 negative allosteric modulators previously reported in the literature were utilized to examine this species disconnect between rat and human mGlu1 activity. Mutation of the key transmembrane domain residue 757 and functional screening of VU0410425 and the literature compounds suggests that amino acid 757 plays a role in the activity of these compounds, but the contribution of the residue is scaffold specific, ranging from critical to minor. The operational model of allosterism was used to estimate the binding affinities of each compound to compare to functional data. This novel series of mGlu1 negative allosteric modulators provides valuable insight into the pharmacology underlying the disconnect between rat and human mGlu1 activity, an issue that must be understood to progress the therapeutic potential of allosteric modulators of mGlu1.

Evaluation of NHS carbamates as a potent and selective class of endocannabinoid hydrolase inhibitors.

Monoacylglycerol lipase (MAGL) is a principal metabolic enzyme responsible for hydrolyzing the endogenous cannabinoid (endocannabinoid) 2-arachidonoylglycerol (2-AG). Selective inhibitors of MAGL offer valuable probes to further understand the enzyme's function in biological systems and may lead to drugs for treating a variety of diseases, including psychiatric disorders, neuroinflammation, and pain. N-Hydroxysuccinimidyl (NHS) carbamates have recently been identified as a promising class of serine hydrolase inhibitors that shows minimal cross-reactivity with other proteins in the proteome. Here, we explore NHS carbamates more broadly and demonstrate their potential as inhibitors of endocannabinoid hydrolases and additional enzymes from the serine hydrolase class. We extensively characterize an NHS carbamate 1a (MJN110) as a potent, selective, and in-vivo-active MAGL inhibitor. Finally, we demonstrate that MJN110 alleviates mechanical allodynia in a rat model of diabetic neuropathy, marking NHS carbamates as a promising class of MAGL inhibitors.

Synthesis of multifunctional Ag@Au@phenol formaldehyde resin particles loaded with folic acids for photothermal therapy.

Multifunctional Ag@Au@ phenol formaldehyde resin (PFR) particles loaded with folic acids (FA) have been designed for killing tumor cells through photothermy conversion under the irradiation of near-infrared (NIR) light. Possessing the virtue of good fluorescence, low toxicity, and good targeting, the nanocomposite consists of an Ag core, an Au layer, a PFR shell, and folic acids on the PFR shell. The Ag@PFR core-shell structure can be prepared with a simple hydrothermal method after preheating. We then filled the PFR shell with a layer of Au by heating and modified the shell with polyelectrolyte to change its surface charge state. To capture tumor cells actively, FA molecules were attached onto the surface of the Ag@Au@PFR particles in the presence of 1-ethyl-3-(3-dimethly aminopropyl) carbodiimide (EDAC) and N-hydroxysuccinimide (NHS). Owing to the excellent property of Au NPs and Ag NPs as photothermal conversion agents, the Ag@Au@ PFR@FA particles can be utilized to kill tumor cells when exposed to NIR light.

Surface-modified ZnSe waveguides for label-free infrared attenuated total reflection detection of DNA hybridization.

This communication presents a novel label-free biosensing method to monitor DNA hybridization via infrared attenuated total reflection (IR-ATR) spectroscopy using surface-modified ZnSe waveguides. Well-defined carboxyl-terminated monolayers were formed at H-terminated ZnSe by direct photochemical activation. Chemical activation of the acidic function was obtained by using succinimide/carbodiimide linkers. The sequential surface modification reactions were characterized by XPS and IR-ATR spectroscopy. Finally, a single stranded DNA probe with a C6-NH(2) 5' modifier was coupled to the ester-terminated surface via peptide bonding, and the hybridization of the immobilized DNA sequence with its complementary strand was directly evaluated by IR-ATR spectroscopy in the mid-infrared (MIR) spectral regime (3-20 µm) without requiring an additional label. A shift of the vibrational modes corresponding to the phosphodiester and deoxyribose structures of the DNA backbone was observed. Hence, this approach substantiates a novel strategy for label-free DNA detection utilizing mid-infrared spectroscopy as the optical sensing platform.

Chemoselective protein and peptide immobilization on biosensor surfaces.

Site-specific immobilization of proteins and peptides on a sensor surface represents a significant challenge for bioanalytical applications such as surface plasmon resonance (SPR). The most common protocols for covalent protein immobilization usually result in heterogeneous presentation of the ligand at the surface, which can in some instances yield conflicting results with analogous data obtained in solution. Here, we discuss two complementary and generic bioconjugation methods that allow chemoselective immobilization of peptides and proteins via either their C-terminus (native chemical ligation) or their N-terminus (oxime ligation). While the protocols described in this chapter were designed for use in a Biacore instrument, the methods should also be applicable to other SPR instruments and, with slight adjustments, to many other types of bioanalytical applications that rely on protein-functionalized surfaces.

Making inert polypropylene fibers chemically responsive by combining atomic layer deposition and vapor phase chemical grafting.

Uniformly grafting organic reactive molecular species, e.g. -NH2, onto substrates that have three-dimensional complex structures and are chemically inert is challenging. The vapor phase chemical grafting of organic molecules enabled by low temperature metal oxide atomic layer deposition (ALD) is presented as a general and promising solution to functionalize inert matrices with complex morphology, such as nonwoven polypropylene mats, through the controllable self-limited molecular assembly mechanism in a combined ALD and vapor phase chemical grafting process.

Surface functionalization of PLGA nanoparticles by non-covalent insertion of a homo-bifunctional spacer for active targeting in cancer therapy.

This work reports the surface functionalization of polymeric PLGA nanoparticles by non-covalent insertion of a homo-bifunctional chemical crosslinker, bis(sulfosuccinimidyl) suberate (BS3) for targeted cancer therapy. We dissolved BS3 in aqueous solution of PVA during formulation of nanoparticles by a modified solid/oil/water emulsion solvent evaporation method. The non-covalent insertion of BS3 was confirmed by Fourier transform infrared (FTIR) spectroscopy. Curcumin and annexin A2 were used as a model drug and a cell specific target, respectively. Nanoparticles were characterized for particle size, zeta potential and surface morphology. The qualitative assessment of antibody attachment was performed by transmission electron microscopy (TEM) as well as confocal microscopy. The optimized formulation showed antibody attachment of 86%. However, antibody attachment was abolished upon blocking the functional groups of BS3. The availability of functional antibodies was evaluated by the presence of a light chain fraction after gel electrophoresis. We further evaluated the in vitro release kinetics of curcumin from antibody coated and uncoated nanoparticles. The release of curcumin is enhanced upon antibody attachment and followed an anomalous release pattern. We also observed that the cellular uptake of nanoparticles was significantly higher in annexin A2 positive cells than in negative cells. Therefore, these results demonstrate the potential use of this method for functionalization as well as to deliver chemotherapeutic agents for treating cancer.