RESUMEN
Current silicon technology is on the verge of reaching its performance limits. This aspect, coupled with the global chip shortage, makes a solid case for steering our attention toward the accelerated commercialization of other electronic materials. Among the available suite of emerging electronic materials, two-dimensional materials, including transition metal dichalcogenides (TMDs), exhibit improved short-channel effects, high electron mobility, and integration into CMOS-compatible processing. While these materials may not be able to replace silicon at the current stages of development, they can supplement Si in the form of Si-compatible CMOS processing and be manufactured for tailored applications. However, the major hurdle in the path of commercialization of such materials is the difficulty in producing their wafer-scale forms, which are not necessarily single crystalline but on a large scale. Recent but exploratory interest in 2D materials from industries, such as TSMC, necessitates an in-depth analysis of their commercialization potential based on trends and progress in entrenched electronic materials (Si) and ones with a short-term commercialization potential (GaN, GaAs). We also explore the possibility of unconventional fabrication techniques, such as printing, for 2D materials becoming more mainstream and being adopted by industries in the future. In this Perspective, we discuss aspects to optimize cost, time, thermal budget, and a general pathway for 2D materials to achieve similar milestones, with an emphasis on TMDs. Beyond synthesis, we propose a lab-to-fab workflow based on recent advances that can operate on a low budget with a mainstream full-scale Si fabrication unit.
RESUMEN
We report the fluorination of electrically insulating hexagonal boron nitride (h-BN) and the subsequent modification of its electronic band structure to a wide bandgap semiconductor via introduction of defect levels. The electrophilic nature of fluorine causes changes in the charge distribution around neighboring nitrogen atoms in h-BN, leading to room temperature weak ferromagnetism. The observations are further supported by theoretical calculations considering various possible configurations of fluorinated h-BN structure and their energy states. This unconventional magnetic semiconductor material could spur studies of stable two-dimensional magnetic semiconductors. Although the high thermal and chemical stability of h-BN have found a variety of uses, this chemical functionalization approach expands its functionality to electronic and magnetic devices.
RESUMEN
Hypermethylated cancer populations are hard to treat due to their enhanced chemo-resistance, characterized by aberrant methylated DNA subunits. Herein, we report on invoking response from such a cancer lineage to chemotherapy utilizing multifunctional copper telluride (Cu2-XTe) nanocubes (NCs) as photothermal and photodynamic agents, leading to significant anticancer activity. The NCs additionally possessed photoacoustic and X-ray contrast imaging abilities that could serve in image-guided therapeutic studies.
Asunto(s)
Antineoplásicos/administración & dosificación , Neoplasias de la Mama/tratamiento farmacológico , Portadores de Fármacos/administración & dosificación , Resistencia a Múltiples Medicamentos , Quimioterapia Combinada/métodos , Nanoestructuras/administración & dosificación , Línea Celular Tumoral , Medios de Contraste/administración & dosificación , Cobre/administración & dosificación , Femenino , Humanos , Hipertermia Inducida/métodos , Modelos Biológicos , Técnicas Fotoacústicas , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes , Telurio/administración & dosificación , Nanomedicina Teranóstica , Rayos XRESUMEN
The structural modification of nanomaterials at the atomic level has the potential to generate tailor-made components with enhanced performance for a variety of tasks. The chemical versatility of graphene has been constantly employed to fabricate multi-functional doped 2D materials with applications encompassing energy storage and electrocatalysis. Despite the many reports on boron- and nitrogen-doped graphenes, the possible synergy that arises from combining these electronically complementary elements has yet to be fully understood and explored. The techniques used for the fabrication of these nanomaterials are reviewed, along with the most recent reports on the benefits of B, N singly doping and co-doping in the electrocatalysis for oxygen reduction reactions and for energy storage in supercapacitors and lithium secondary batteries. The investigation of bulk co-doped materials has intrinsic limitations in fully understanding the real role of heteroatoms in the above applications. Ultimately, the design and creation of substituted monolayers with controlled compositions might hold the key for carbon-based energy-related applications.
RESUMEN
A simple, crude Jatropha curcas (JC) oil-based synthesis approach, devoid of any toxic phosphine and pyrophoric ligands, to produce size and shape tuned CdSe QDs and a further copper sulfide (Cu2S) encasing is presented. The QDs exhibited excellent photoluminescent properties with narrow band gap emission. Furthermore, the Cu2S shell rendered additional cytocompatibility and stability to the hybrid nanomaterial, which are major factors for translational and clinical applications of QDs. The nanocomposites were PEGylated and folate conjugated to augment their cytoamiability and enhance their specificity towards cancer cells. The nanohybrids possess potentials for visible, near infrared (NIR), photoacoustic (PA) and computed tomography (µCT) imaging. The diverse functionality of the composite was derived from the multi-channel imaging abilities and thermal competence on NIR laser irradiation to specifically actuate the photo-thermal ablation of brain cancer cells.
Asunto(s)
Hipertermia Inducida/métodos , Nanopartículas/química , Nanopartículas/uso terapéutico , Neoplasias/diagnóstico por imagen , Neoplasias/terapia , Fototerapia/métodos , Animales , Compuestos de Cadmio , Línea Celular Tumoral , Cobre , Humanos , Jatropha , Ratones , Nanocompuestos/química , Nanocompuestos/uso terapéutico , Nanopartículas/ultraestructura , Nanotecnología , Fantasmas de Imagen , Aceites de Plantas , Puntos Cuánticos/química , Puntos Cuánticos/uso terapéutico , Puntos Cuánticos/ultraestructura , Compuestos de Selenio , Espectroscopía Infrarroja por Transformada de Fourier , Sulfuros , Microtomografía por Rayos XRESUMEN
The gate-controllability of the Fermi-edge onset of interband absorption in graphene can be utilized to modulate near-infrared radiation in the telecommunication band. However, a high modulation efficiency has not been demonstrated to date, because of the small amount of light absorption in graphene. Here, we demonstrate a â¼ 40% amplitude modulation of 1.55 µm radiation with gated single-layer graphene that is coupled with a silicon microring resonator. Both the quality factor and resonance wavelength of the silicon microring resonator were strongly modulated through gate tuning of the Fermi level in graphene. These results promise an efficient electro-optic modulator, ideal for applications in large-scale on-chip optical interconnects that are compatible with complementary metal-oxide-semiconductor technology.
RESUMEN
We report a room temperature study on the electrical response of field-effect transistors (FETs) based on few-layered MoSe2, grown by a chemical vapor transport technique, mechanically exfoliated onto SiO2. In contrast to previous reports on MoSe2 FETs electrically contacted with Ni, MoSe2 FETs electrically contacted with Ti display ambipolar behavior with current on to off ratios up to 10(6) for both hole and electron channels when applying a small excitation voltage. A rather small hysteresis is observed when sweeping the back-gate voltage between positive and negative values, indicating the near absence of charge "puddles". For both channels the Hall effect indicates Hall mobilities µH ≃ 250 cm(2)/(V s), which are comparable to the corresponding field-effect mobilities, i.e., µFE â¼ 150 to 200 cm(2)/(V s) evaluated through the conventional two-terminal field-effect configuration. Therefore, our results suggest that MoSe2 could be a good candidate for p-n junctions composed of a single atomic layer and for low-power, complementary logic applications.
RESUMEN
Two-dimensional (2D) atomic layers derived from bulk layered materials are very interesting from both scientific and application viewpoints, as evidenced from the story of graphene. Atomic layers of several such materials such as hexagonal boron nitride (h-BN) and dichalcogenides are examples that complement graphene. The observed unconventional properties of graphene has triggered interest in doping the hexagonal honeycomb lattice of graphene with atoms such as boron (B) and nitrogen (N) to obtain new layered structures. Individual atomic layers containing B, C, and N of various compositions conform to several stable phases in the three-component phase diagram of B-C-N. Additionally, stacking layers built from C and BN allows for the engineering of new van-der-Waals stacked materials with novel properties. In this paper, the synthesis, characterization, and properties of atomically thin layers, containing B, C, and N, as well as vertically assembled graphene/h-BN stacks are reviewed. The electrical, mechanical, and optical properties of graphene, h-BN, and their hybrid structure are also discussed along with the applications of such materials.
Asunto(s)
Boro/química , Carbono/química , Nitrógeno/química , Grafito/química , Nanoestructuras/químicaRESUMEN
Breast tumors contain a small population of tumor initiating stem-like cells, termed breast cancer stem cells (BCSCs). These cells, which are refractory to chemotherapy and radiotherapy, are thought to persist following treatment and drive tumor recurrence. We examined whether BCSCs are similarly resistant to hyperthermic therapy, and whether nanoparticles could be used to overcome this resistance. Using a model of triple-negative breast cancer stem cells, we show that BCSCs are markedly resistant to traditional hyperthermia and become enriched in the surviving cell population following treatment. In contrast, BCSCs are sensitive to nanotube-mediated thermal treatment and lose their long-term proliferative capacity after nanotube-mediated thermal therapy. Moreover, use of this therapy in vivo promotes complete tumor regression and long-term survival of mice bearing cancer stem cell-driven breast tumors. Mechanistically, nanotube thermal therapy promotes rapid membrane permeabilization and necrosis of BCSCs. These data suggest that nanotube-mediated thermal treatment can simultaneously eliminate both the differentiated cells that constitute the bulk of a tumor and the BCSCs that drive tumor growth and recurrence.
Asunto(s)
Neoplasias de la Mama/patología , Neoplasias de la Mama/terapia , Hipertermia Inducida/métodos , Nanopartículas/uso terapéutico , Células Madre Neoplásicas/patología , Fototerapia/métodos , Animales , Muerte Celular , Línea Celular Tumoral , Permeabilidad de la Membrana Celular , Proliferación Celular , Supervivencia Celular , Femenino , Proteínas HSP90 de Choque Térmico/metabolismo , Humanos , Ratones , Nanotubos de Carbono/química , Necrosis , Células Madre Neoplásicas/metabolismo , Fenotipo , Análisis de Supervivencia , Temperatura , Factores de TiempoRESUMEN
Graphene (G) and atomic layers of hexagonal boron nitride (h-BN) are complementary two-dimensional materials, structurally very similar but with vastly different electronic properties. Recent studies indicate that h-BN atomic layers would be excellent dielectric layers to complement graphene electronics. Graphene on h-BN has been realized via peeling of layers from bulk material to create G/h-BN stacks. Considering that both these layers can be independently grown via chemical vapor deposition (CVD) of their precursors on metal substrates, it is feasible that these can be sequentially grown on substrates to create the G/h-BN stacked layers useful for applications. Here we demonstrate the direct CVD growth of h-BN on highly oriented pyrolytic graphite and on mechanically exfoliated graphene, as well as the large area growth of G/h-BN stacks, consisting of few layers of graphene and h-BN, via a two-step CVD process. The G/h-BN film is uniform and continuous and could be transferred onto different substrates for further characterization and device fabrication.
RESUMEN
Hexagonal boron nitride (h-BN), a layered material similar to graphite, is a promising dielectric. Monolayer h-BN, so-called "white graphene", has been isolated from bulk BN and could be useful as a complementary two-dimensional dielectric substrate for graphene electronics. Here we report the large area synthesis of h-BN films consisting of two to five atomic layers, using chemical vapor deposition. These atomic films show a large optical energy band gap of 5.5 eV and are highly transparent over a broad wavelength range. The mechanical properties of the h-BN films, measured by nanoindentation, show 2D elastic modulus in the range of 200-500 N/m, which is corroborated by corresponding theoretical calculations.
RESUMEN
Two-dimensional materials, such as graphene and monolayer hexagonal BN (h-BN), are attractive for demonstrating fundamental physics in materials and potential applications in next-generation electronics. Atomic sheets containing hybridized bonds involving elements B, N and C over wide compositional ranges could result in new materials with properties complementary to those of graphene and h-BN, enabling a rich variety of electronic structures, properties and applications. Here we report the synthesis and characterization of large-area atomic layers of h-BNC material, consisting of hybridized, randomly distributed domains of h-BN and C phases with compositions ranging from pure BN to pure graphene. Our studies reveal that their structural features and bandgap are distinct from those of graphene, doped graphene and h-BN. This new form of hybrid h-BNC material enables the development of bandgap-engineered applications in electronics and optics and properties that are distinct from those of graphene and h-BN.
RESUMEN
Developing bactericidal coatings using simple green chemical methods could be a promising route to potential environmentally friendly applications. Here, we describe an environmentally friendly chemistry approach to synthesize metal-nanoparticle (MNP)-embedded paint, in a single step, from common household paint. The naturally occurring oxidative drying process in oils, involving free-radical exchange, was used as the fundamental mechanism for reducing metal salts and dispersing MNPs in the oil media, without the use of any external reducing or stabilizing agents. These well-dispersed MNP-in-oil dispersions can be used directly, akin to commercially available paints, on nearly all kinds of surface such as wood, glass, steel and different polymers. The surfaces coated with silver-nanoparticle paint showed excellent antimicrobial properties by killing both Gram-positive human pathogens (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). The process we have developed here is quite general and can be applied in the synthesis of a variety of MNP-in-oil systems.
Asunto(s)
Antibacterianos/química , Antibacterianos/farmacología , Nanopartículas del Metal/química , Pintura/análisis , Aceites de Plantas/química , Plata/química , Plata/farmacología , Escherichia coli/efectos de los fármacos , Estructura Molecular , Staphylococcus aureus/efectos de los fármacosRESUMEN
We demonstrate that nitrogen doped, multi-walled carbon nanotubes (CN(x)-MWNT) result in photo-ablative destruction of kidney cancer cells when excited by near infrared (NIR) irradiation. Further, we show that effective heat transduction and cellular cytotoxicity depends on nanotube length: effective NIR coupling occurs at nanotube lengths that exceed half the wavelength of the stimulating radiation, as predicted in classical antenna theory. We also demonstrate that this radiation heats the nanotubes through induction processes, resulting in significant heat transfer to surrounding media and cell killing at extraordinarily small radiation doses. This cell death was attributed directly to photothermal effect generated within the culture, since neither the infrared irradiation itself nor the CN(x)-MWNT were toxic to the cells.
Asunto(s)
Hipertermia Inducida/métodos , Nanomedicina/métodos , Nanotubos de Carbono/química , Neoplasias/patología , Fototerapia/métodos , Línea Celular Tumoral , Supervivencia Celular , Humanos , Rayos Infrarrojos/uso terapéutico , Nanotubos de Carbono/ultraestructura , Neoplasias/terapiaRESUMEN
Certain anaerobic bacteria respire toxic selenium oxyanions and in doing so produce extracellular accumulations of elemental selenium [Se(0)]. We examined three physiologically and phylogenetically diverse species of selenate- and selenite-respiring bacteria, Sulfurospirillum barnesii, Bacillus selenitireducens, and Selenihalanaerobacter shriftii, for the occurrence of this phenomenon. When grown with selenium oxyanions as the electron acceptor, all of these organisms formed extracellular granules consisting of stable, uniform nanospheres (diameter, approximately 300 nm) of Se(0) having monoclinic crystalline structures. Intracellular packets of Se(0) were also noted. The number of intracellular Se(0) packets could be reduced by first growing cells with nitrate as the electron acceptor and then adding selenite ions to washed suspensions of the nitrate-grown cells. This resulted in the formation of primarily extracellular Se nanospheres. After harvesting and cleansing of cellular debris, we observed large differences in the optical properties (UV-visible absorption and Raman spectra) of purified extracellular nanospheres produced in this manner by the three different bacterial species. The spectral properties in turn differed substantially from those of amorphous Se(0) formed by chemical oxidation of H(2)Se and of black, vitreous Se(0) formed chemically by reduction of selenite with ascorbate. The microbial synthesis of Se(0) nanospheres results in unique, complex, compacted nanostructural arrangements of Se atoms. These arrangements probably reflect a diversity of enzymes involved in the dissimilatory reduction that are subtly different in different microbes. Remarkably, these conditions cannot be achieved by current methods of chemical synthesis.