The effect of photobiomodulation therapy in common maxillofacial injuries: Current status.

The use of photobiomodulation therapy (PBMT) may be used for treating trauma to the maxillofacial region. The effects of PBMT on maxillofacial injuries were discussed in this review article. The electronic databases Pubmed, Scopus, and Web of Science were thoroughly searched. This review included in vitro, in vivo, and clinical studies describing how PBMT can be used in maxillofacial tissue engineering and regenerative medicine. Some studies suggest that PBMT may offer a promising therapy for traumatic maxillofacial injuries because it can stimulate the differentiation and proliferation of various cells, including dental pulp cells and mesenchymal stem cells, enhancing bone regeneration and osseointegration. PBMT reduces pain and swelling after oral surgery and tooth extraction in human and animal models of maxillofacial injuries. Patients with temporomandibular disorders also benefit from PBMT in terms of reduced inflammation and symptoms. PBMT still has some limitations, such as the need for standardizing parameters. PBMT must also be evaluated further in randomized controlled trials in various maxillofacial injuries. As a result, PBMT offers a safe and noninvasive treatment option for patients suffering from traumatic maxillofacial injuries. PBMT still requires further research to establish its efficacy in clinical practice and determine the optimal parameters.

The role of current herbal extracts in bone regeneration through dental implants: in vitro/in vivo/clinical studies.

The quality and quantity of bone at the interface of an implant system are determining factors in the implant's stability. Alternative agents have been studied to augment implants and bone defects, including bone-conductive and bone-inducing agents. By modifying implant surface coatings on the nanoscale, one can enhance osseointegration by stimulating bone cell adhesion, bone matrix formation, and mineralization. Because alternative agents stimulate osteoblasts to mineralize and can control pectin structure, plant-derived silicone has been suggested as a potential candidate for surface nanocoatings on orthopedic and dental titanium implants. Inducing the differentiation of cells or accelerating bone regeneration is possible with the plant extract. Coating these extracts on implant devices can improve cell attachment, differentiation, and proliferation. This review article discusses the role of herbal materials in bone regeneration through dental implants.

Antimicrobial properties of green synthesized novel TiO2 nanoparticles using Iranian propolis extracts.

The oral antimicrobial and cytotoxic properties of green synthesized novel titanium dioxide nanoparticles (TiO2 NPs) using Iranian propolis extracts were investigated on oral bacteria and fibroblast cells. In this study, propolis was sampled, and alcoholic extracts were prepared. The TiO2 NPs were biosynthesized using propolis extracts. The synthesized TiO2 NPs were characterized by scanning electron microscope (SEM), X-ray diffraction analysis, energy-dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering, ultraviolet-visible (UV-Vis), transmission electron microscope, Brunauer-Emmett-Teller, and zeta potential. MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide), minimal inhibitory concentration, minimum bactericidal concentration, minimum fungicidal concentration, biofilm formation, and degradation tests were studied to clarify the oral antimicrobial properties of green synthesized TiO2  NPs. According to the FTIR analysis, the propolis extract contained flavonoids and phenolic compounds in addition to TiO2 NPs. Additionally, UV-Vis revealed that intense bands had formed NPs. EDX spectra and SEM images revealed that the stabilizing agent was in perfect quasi-spherical shapes around 21 nm. An EDX spectrum was used to verify the presence of titanium and oxygen. There were no significant cytotoxicity effects. The antibacterial results showed that Pro1TiO2 (Khalkhal sample) had better effects than Pro2TiO2 (Gilan sample) and TiO2 NPs. The present study presents a new process for synthesizing TiO2 NPs from propolis extracts with less toxic effects and user-friendly, eco-friendly, and economical materials. Pro1TiO2 NPs may be considered the best candidate for clinical application.

The Current Antimicrobial and Antibiofilm Activities of Synthetic/Herbal/Biomaterials in Dental Application.

Herbal and chemical products are used for oral care and biofilm treatment and also have been reported to be controversial in the massive trials conducted in this regard. The present review is aimed at evaluating the potential of relevant herbal and chemical products and comparing their outcomes to conventional oral care products and summarizing the current state of evidence of the antibiofilm properties of different products by evaluating studies from the past eleven years. Chlorhexidine gluconate (CHX), essential oils (EOs), and acetylpyridinium chloride were, respectively, the most commonly studied agents in the included studies. As confirmed by all systematic reviews, CHX and EO significantly control the plaque formation and gingival indices. Fluoride is another interesting reagent in oral care products that has shown promising results of oral health improvement, but the evidence quality needs to be refined. The synergy between natural plants and chemical products should be targeted in the future to accede to the formation of new, efficient, and healthy anticaries strategies. Moreover, to discover their biofilm-interfering or biofilm-inhibiting activities, effective clinical trials are needed. In this review article, therapeutic applications of herbal/chemical materials in oral biofilm infections are discussed in recent years (2010-2022).

Chemical Characterization and Cytotoxic/Antibacterial Effects of Nine Iranian Propolis Extracts on Human Fibroblast Cells and Oral Bacteria.

Multimicrobial infections caused by pathobionts are called dysbiotic multimicrobial illnesses. Commercial mouthwashes, such as chlorhexidine, have negative side effects that can prevent tooth decay and infection. The present study aimed to determine the antifungal, antibacterial, and cytotoxicity characteristics of the propolis extracts from different areas (Iran). The ethanolic extract of propolis was prepared. GC/MS carried out the characterization to determine the thymol, carvacrol, and menthol extracts, and also, total phenol and flavonoid were assed for all samples. The antimicrobial and antibiofilm effects were evaluated against S. mutans, S. mitis, S. salivarius, L. acidophilus, E. coli, S. aureus, and C. albicans. The cytotoxic effect of extracts was measured on human fibroblast cells by MTT test. The MIC values in mg mL-1 were ranged as follows: S. salivarius (0.003 to 0.048), S. mutans (0.003 to 0.029), S. mitis (0.007 to 0.058), L. acidophilus (0.007 to 0.117), C. albicans (0.014 to 0.234), E. coli (0.007 to 0.058), and S. aureus (0.007 to 0.058), while MBC were, respectively, S. mutans (0.007 to 0.058), S. salivarius (0.007 to 0.117), S. mitis (0.007 to 0.117), L. acidophilus (0.014 to 0.234), C. albicans (0.029 to 0.468), E. coli (0.014 to 0.234), and S. aureus (0.007 to 0.117). Cariogenic bacteria and Candida albicans were demonstrated to be resistant to propolis extracts. Therefore, propolis extracts may make good mouthwashes.

The Potential Application of Green-Synthesized Metal Nanoparticles in Dentistry: A Comprehensive Review.

Orodental problems have long been managed using herbal medicine. The development of nanoparticle formulations with herbal medicine has now become a breakthrough in dentistry because the synthesis of biogenic metal nanoparticles (MNPs) using plant extracts can address the drawbacks of herbal treatments. Green production of MNPs such as Ag, Au, and Fe nanoparticles enhanced by plant extracts has been proven to be beneficial in managing numerous orodental disorders, even outperforming traditional materials. Nanostructures are utilized in dental advances and diagnostics. Oral disease prevention medicines, prostheses, and tooth implantation all employ nanoparticles. Nanomaterials can also deliver oral fluid or pharmaceuticals, treating oral cancers and providing a high level of oral healthcare. These are also found in toothpaste, mouthwash, and other dental care products. However, there is a lack of understanding about the safety of nanomaterials, necessitating additional study. Many problems, including medication resistance, might be addressed using nanoparticles produced by green synthesis. This study reviews the green synthesis of MNPs applied in dentistry in recent studies (2010-2021).

Evaluation of Cytotoxic and Antimicrobial Properties of Iranian Sea Salts: An In Vitro Study.

BACKGROUND: Dental caries is known as a multimicrobial disease. Caries are very prevalent in numerous countries, and the incidence is higher in underdeveloped countries than in developed countries. Dental caries is a major public health problem, and it is the most prevalent health problem across the world, affecting 2.4 billion people. Natural mouthwashes can be beneficial in the prevention of dental caries and oral infections without the side effects of synthetic mouthwashes. AIM: The aim of the present study was to investigate the antibacterial, antifungal, and cytotoxicity properties of sea salt from different areas of Iran. METHODS AND MATERIALS: Sea salts from different areas (Urmia, Qom, and Jarquyeh) of Iran were collected. In order to define the elemental and mineralogical features of different salt samples, X-ray powder diffraction (XRD) was employed. Different concentrations (0.19-50 mg/mL) of sea salt were used in the antimicrobial and antibiofilm tests. The antimicrobial (MIC, MBC, MFC, and DAD tests) and antibiofilm (formation and degradation tests) effects were evaluated against L. acidophilus, S. aureus, E. coli, S. mitis, S. mutans, S. salivarius, and C. albicans. The cytotoxic effect of salts was evaluated on human gingival fibroblasts by the MTT test. RESULTS: The range of MIC values in mg ml-1 was as follows: S. salivarius (50), S. mutans (50), S. mitis (50), L. acidophilus (12.5 to >50), C. albicans (50), E. coli (12.5 to 25), and S. aureus (12.5 to 25), while MBC values were, S. mutans (>50), S. salivarius (>50), S. mitis (>50), L. acidophilus (50 to >50), C. albicans (>50), E. coli (50), and S. aureus (50). MTT results showed that more than 50% of cell viability depends on decreasing the salt concentration (<1.56 mg/ml). CONCLUSION: Sea salts had significant antimicrobial effects on cariogenic bacteria and C. albicans. Therefore, sea salts can be a suitable candidate for mouthwash.

Effect of Surfosept and Deconex® 53 Disinfectant Agents on the Accuracy and Dimensional Stability of Panasil Dental Impression Materials: An Experimental Study.

MATERIALS AND METHODS: This in vitro study was performed on 30 dental casts. The samples were divided into one control group and two experimental groups to be disinfected with Surfosept (1%) and Deconex® 53 (2%) using a sequential sampling method (10 per group). The impressions in the experimental groups (i.e., Surfosept and Deconex® 53) were rinsed and dried; then, the disinfectant was sprayed on the impressions and remained for 30 seconds before pouring with stone. In the control group, the impressions were only rinsed and dried and were poured in 10 minutes. Cast dimensions were measured by a profile projector device, and the mean values obtained from the experimental groups were compared with those of the control group. RESULTS: There were no significant differences among the groups regarding the height of the resulting dies without undercut (P=0.62). Moreover, there was no significant difference among the groups regarding the distance between the two dies (P=0.77). However, the diameter of the dies with undercut and without undercut was different significantly among the control and experimental groups (P < 0.005). CONCLUSION: In general, no significant difference was encountered between dimensional stability and accuracy of the dental impressions using Surfosept and Deconex® 53 in this study.

Biocompatible and Biomaterials Application in Drug Delivery System in Oral Cavity.

Biomaterials applications have rapidly expanded into different fields of sciences. One of the important fields of using biomaterials is dentistry, which can facilitate implantation, surgery, and treatment of oral diseases such as peri-implantitis, periodontitis, and other dental problems. Drug delivery systems based on biocompatible materials play a vital role in the release of drugs into aim tissues of the oral cavity with minimum side effects. Therefore, scientists have studied various delivery systems to improve the efficacy and acceptability of therapeutic approaches in dental problems and oral diseases. Also, biomaterials could be utilized as carriers in biocompatible drug delivery systems. For instance, natural polymeric substances, such as gelatin, chitosan, calcium phosphate, alginate, and xanthan gum are used to prepare different forms of delivery systems. In addition, some alloys are conducted in drug complexes for the better in transportation. Delivery systems based on biomaterials are provided with different strategies, although individual biomaterial has advantages and disadvantages which have a significant influence on transportation of complex such as solubility in physiological environments or distribution in tissues. Biomaterials have antibacterial and anti-inflammatory effects and prolonged time contact and even enhance antibiotic activities in oral infections. Moreover, these biomaterials are commonly prepared in some forms such as particulate complex, fibers, microspheres, gels, hydrogels, and injectable systems. In this review, we examined the application of biocompatible materials in drug delivery systems of oral and dental diseases or problems.

A Novel Developed Bioactive Composite Resin Containing Silver/Zinc Oxide (Ag/ZnO) Nanoparticles as an Antimicrobial Material against Streptococcus mutans, Lactobacillus, and Candida albicans.

AIM: The objectives of this study were to develop a new bioactive composite resin containing silver/zinc oxide (Ag/ZnO) nanoparticles and investigate the effects on mechanical, cytotoxic, biocompatibility, and antimicrobial properties. MATERIALS AND METHODS: Disc-shaped specimens were prepared from composite with and without nanoparticles in separate culture media containing Streptococcus mutans, Lactobacillus, and Candida albicans. Bracket bonding evaluation was performed on composite without nanoparticles (O), composite containing ZnO (Z) nanoparticles, composite containing ZnO nanoparticles and silver ions (A&Z), and composite containing Ag/ZnO nanoparticles (AZ) synthesized using optical precipitation. RESULTS: Composite resin with nanoparticles (AZ, A&Z, and Z) showed significant antimicrobial properties (P < 0.05). The mean shear bond strength of A&Z composite resin (13.61 ± 0.73 MPa) was significantly less than that of conventional composite resin (19.03 ± 4.12 MPa) (P < 0.05). In addition, the mean shear bond strength of AZ composite resin (20.49 ± 1.03 MPa) was significantly higher than that of Z (16.35 ± 1.03 MPa) and A&Z composite resins. CONCLUSIONS: Incorporation of ZnO nanoparticles and their compounds into orthodontic composite resins induced antibacterial properties against oral pathogens, and of all these nanoparticles, the AZ group exhibited the best antimicrobial activity and highest shear bond strength.

The Current Strategies in Controlling Oral Diseases by Herbal and Chemical Materials.

Dental plaque is a biofilm composed of complex microbial communities. It is the main cause of major dental diseases such as caries and periodontal diseases. In a healthy state, there is a delicate balance between the dental biofilm and host tissues. Nevertheless, due to the oral cavity changes, this biofilm can become pathogenic. The pathogenic biofilm shifts the balance from demineralization-remineralization to demineralization and results in dental caries. Dentists should consider caries as a result of biological processes of dental plaque and seek treatments for the etiologic factors, not merely look for the treatment of the outcome caused by biofilm, i.e., dental caries. Caries prevention strategies can be classified into three groups based on the role and responsibility of the individuals doing them: (1) community-based strategy, (2) dental professionals-based strategy, and (3) individual-based strategy. The community-based methods include fluoridation of water, salt, and milk. The dental professionals-based methods include professional tooth cleaning and use of varnish, fluoride gel and foam, fissure sealant, and antimicrobial agents. The individual-based (self-care) methods include the use of fluoride toothpaste, fluoride supplements, fluoride mouthwashes, fluoride gels, chlorhexidine gels and mouthwashes, slow-release fluoride devices, oral hygiene, diet control, and noncariogenic sweeteners such as xylitol. This study aimed to study the research in the recent five years (2015-2020) to identify the characteristics of dental biofilm and its role in dental caries and explore the employed approaches to prevent the related infections.

The Role of Biomaterials and Biocompatible Materials in Implant-Supported Dental Prosthesis.

The dental implant is one of the appropriate instances of the different dental materials and their application, which is the combined procedure of technology and science in physics, biomechanics, and surface chemistry from macroscale to nanoscale surface engineering and manufactured technologies. In recent decades, biomaterials in implant therapy promote bone response and biomechanical ability, which is long-term from surgical equipment to final prosthetic restoration. Biomaterials have a crucial role in rehabilitating the damaged structure of the tooth and supplying acceptable outcomes correlated with clinical performance. There are some challenges in implantation such as bleeding, mobility, peri-implant infections, and the solution associated with modern strategies which are regarded to biomaterials. Various materials have been known as promising candidates for coatings of dental implants which contain polyhydroxyalkanoates, calcium phosphate, carbon, bisphosphonates, hydroxyapatite, bone stimulating factors, bioactive glass, bioactive ceramics, collagen, chitosan, metal and their alloys, fluoride, and titanium/titanium nitride. It is pivotal that biomaterials should be biodegradable; for example, polyhydroxyalkanoates are biodegradable; also, they do not have bad effects on tissues and cells. Despite this, biomaterials have important roles in prosthetic conditions such as dental pulp regeneration, the healing process, and antibacterial and anti-inflammatory effects. In this review study, the role of biocompatible materials in dental implants is investigated in in vitro and in vivo studies.

Electrospun cellulose acetate/gelatin nanofibrous wound dressing containing berberine for diabetic foot ulcer healing: in vitro and in vivo studies.

Functional wound dressing with tailored physicochemical and biological properties is vital for diabetic foot ulcer (DFU) treatment. Our main objective in the current study was to fabricate Cellulose Acetate/Gelatin (CA/Gel) electrospun mat loaded with berberine (Beri) as the DFU-specific wound dressing. The wound healing efficacy of the fabricated dressings was evaluated in streptozotocin-induced diabetic rats. The results demonstrated an average nanofiber diameter of 502 ± 150 nm, and the tensile strength, contact angle, porosity, water vapor permeability and water uptake ratio of CA/Gel nanofibers were around 2.83 ± 0.08 MPa, 58.07 ± 2.35°, 78.17 ± 1.04%, 11.23 ± 1.05 mg/cm2/hr, and 12.78 ± 0.32%, respectively, while these values for CA/Gel/Beri nanofibers were 2.69 ± 0.05 MPa, 56.93 ± 1°, 76.17 ± 0.76%, 10.17 ± 0.21 mg/cm2/hr, and 14.37 ± 0.42%, respectively. The antibacterial evaluations demonstrated that the dressings exhibited potent antibacterial activity. The collagen density of 88.8 ± 6.7% and the angiogenesis score of 19.8 ± 3.8 obtained in the animal studies indicate a proper wound healing. These findings implied that the incorporation of berberine did not compromise the physical properties of dressing, while improving the biological activities. In conclusion, our results indicated that the prepared mat is a proper wound dressing for DFU management and treatment.