RESUMEN
Sustainable and "green" technologies, such as cold plasma are gaining attention in recent times for improving the functional properties of hydrocolloids. Chemical modifications of hydrocolloids require several chemicals and solvents, which are not environment-friendly. The major objective of the study was to understand the impact of plasma treatment (170-230 V|15 min) on the rheology of film-forming solutions (FFS) and the barrier properties of pectin films. The film-forming properties of plasma-treated pectin were investigated in the presence of two plasticizers, namely, glycerol and polyethylene glycol (PEG) 400. The effects of cross-linking by CaCl2 on the rheology of FFS and barrier properties of the films were discussed. A voltage-dependent decrease in the apparent viscosity of FFS was observed. The viscoelastic properties of the FFS were enhanced due to cross-linking. Glycerol exhibited a better plasticizing effect than PEG. Cross-linking and increasing voltage synergistically contributed towards lower oxygen and carbon dioxide transmission rates. The moisture sorption rate and capacity of the films increased with the voltage of the treatment. The resistance to extension of the films made from glycerol and PEG decreased with voltage, with no significant change in extensibility. On the other hand, the cross-linking by Ca2+ and plasma treatment enhanced the resistance to extension for the films made from both the plasticizers. While the increasing hydrophilicity and opacity of the films were a major drawback of plasma modification, the increase in UV barrier property of the films was an advantage of the modification.
Asunto(s)
Malus , Gases em Plasma , Glicerol/química , Plastificantes/química , Pectinas/química , ReologíaRESUMEN
Subcritical water is a "green" method of extraction and modification of pectin being explored in recent times. While the conventional acid extraction degrades the side chains and produces homogalacturonan (HG)-rich pectic polysaccharides, subcritical water extraction preserved the hairy region, namely the rhamnogalacturonan-I (RG-I) region of the pectin. However, higher temperatures (usually greater than 160 °C) degraded the RG-I and HG motifs, producing pectic oligosaccharides. A high selectivity towards pectic polysaccharides with a low protein content was observed during extraction by subcritical water. This can be majorly attributed to the heat-induced denaturation of proteins. Although the bioactive and emulsifying properties were more remarkable for subcritical water-extracted pectin, the rheological properties such as elasticity were negatively impacted. Apart from extraction, subcritical water can also be employed to aid the breakdown of pectic polysaccharides into oligosaccharides. The addition of several organic acids in subcritical water can help form pectic fragments, which are otherwise possible only by adding a cocktail of enzymes. For instance, carboxylic acids in subcritical water media can have a similar action to endo-polygalacturonase on the homogalacturonan backbone. It is worthwhile to note that intense extraction or modification conditions can form advanced glycation end products, which are undesirable and should be monitored throughout the modification process. Several thermodynamic and kinetic models can be employed to predict the breakdown of the pectin structure in subcritical conditions. Finally, this study suggests a strategy for obtaining the optimum process parameters, namely, temperature, duration, and the liquid:solid ratio for achieving maximum yield and the desired structure of the pectic polysaccharide.
Asunto(s)
Poligalacturonasa , Agua , Ácidos Carboxílicos , Productos Finales de Glicación Avanzada , Oligosacáridos , Pectinas/química , Poligalacturonasa/metabolismo , Polisacáridos , Ramnogalacturonanos , Agua/químicaRESUMEN
Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.
Asunto(s)
Pectinas/química , Adopción , Electricidad , Industria de Alimentos , Microondas , Oligosacáridos/químicaRESUMEN
Sophorolipids (SLs), a prominent member of the biosurfactants family are produced in acidic and/or lactonic form by yeast Starmerella bombicola NRRL Y-17069 when grown on hydrophilic or hydrophobic or both carbon sources. In current study, ricinoleic acid rich castor oil (10%) was used as hydrophobic and glycerol (10%) was used as hydrophilic carbon source. The yields of 24.5 ± 0.25 g/l sophorolipids were analyzed by anthrone and HPLC method which further increased upto 40.24 ± 0.76 g/l sophorolipids using fed batch process at 5L fermenter level. The structures of sophorolipids synthesized on castor oil were elucidated by liquid chromatography-mass spectrometer (LC-MS), (13)C and (1)H NMR. The results indicated that the ricinoleic acid (RA) gets hydroxylated at ω-1 position but incorporated into sophorolipids through already available hydroxyl group at 12(th) position. It resulted in the production of a novel sophorolipids with hydroxyl fatty acid as side chain and has applications as surfactant for novel drug delivery, anti microbial agent, cosmetic ingredient and emulsifier.
Asunto(s)
Aceite de Ricino/química , Lípidos/síntesis química , Tensoactivos/síntesis química , Levaduras , Antiinfecciosos , Cromatografía Líquida de Alta Presión/métodos , Cromatografía Liquida , Cosméticos , Sistemas de Liberación de Medicamentos , Emulsionantes , Glicerol/química , Interacciones Hidrofóbicas e Hidrofílicas , Hidroxilación , Lípidos/química , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Ácidos Ricinoleicos/química , Tensoactivos/químicaRESUMEN
This work evaluates the effect of different amino acids on production of CyA production in solid-state fermentation that was previously optimized for different fermentation parameters by one-factor-at-a-time for the maximum production of CyA by Tolypocladium inflatum MTCC 557. Based on the Plackett-Burman design, glycerol, ammonium sulfate, FeCl3, and inoculum size were selected for further optimization by response surface methodology (RSM). After identifying effective nutrients, RSM was used to develop mathematical model equations, study responses, and establish the optimum concentrations of the key nutrients for higher CyA production. It was observed that supplementation of medium containing (% w/w) glycerol, 1.53; ammonium sulfate, 0.95; FeCl3, 0.18; and inoculum size 6.4 ml/5g yielded a maximum of 7,106 mg/kg as compared with 6,480 mg CyA/kg substrate using one factor at a time. In the second step, the effect of amino acids on the production of CyA was studied. Addition of L-valine and L-leucine in combination after 20 h of fermentation resulted in maximum production of 8,166 mg/kg.
Asunto(s)
Ciclosporina/metabolismo , Fermentación , Modelos Biológicos , Modelos Estadísticos , Sulfato de Amonio/química , Sulfato de Amonio/metabolismo , Aceite de Coco , Medios de Cultivo/química , Medios de Cultivo/metabolismo , Fibras de la Dieta/metabolismo , Glicerol/química , Glicerol/metabolismo , Hypocreales/crecimiento & desarrollo , Hypocreales/metabolismo , Microbiología Industrial/métodos , Compuestos de Hierro/química , Compuestos de Hierro/metabolismo , Leucina/química , Leucina/metabolismo , Aceites de Plantas/química , Aceites de Plantas/metabolismo , Factores de Tiempo , Valina/química , Valina/metabolismoRESUMEN
Cyclosporin A (CyA) produced by Tolypocladium inflatum is a promising drug owing to its immunosuppressive and antifungal activities. From an industrial point of view, the necessity to obtain a suitable and economic medium for higher production of CyA was the aim of this work. The present study evaluated the effect of different fermentation parameters in solid state fermentation, such as selection of solid substrate, hydrolysis of substrates, initial moisture content, supplementation of salts, additional carbon, and nitrogen sources, as well as the inoculum age and size, on production of CyA by Tolypocladium inflatum MTCC 557. The fermentation was carried out at 25+/-2 degrees for 9 days. A combination of hydrolyzed wheat bran flour and coconut oil cake (1:1) at 70% initial moisture content supported a maximum production of 3,872+/-156 mg CyA/kg substrate as compared with 792+/-33 mg/kg substrate before optimization. Furthermore, supplementation of salts, glycerol (1%w/w), and ammonium sulfate (1%w/w) increased the production of CyA to 5,454+75 mg/kg substrate. Inoculation of 5 g of solid substrate with 6 ml of 72-h-old seed culture resulted in a maximum production of 6,480+95 mg CyA/kg substrate.