Moxifloxacin-loaded in situ synthesized Bioceramic/Poly(L-lactide-co-ε-caprolactone) composite scaffolds for treatment of osteomyelitis and orthopedic regeneration.

High local intraosseous levels of antimicrobial agents are required for adequate long-term treatment of chronic osteomyelitis (OM). In this study, biodegradable composite scaffolds of poly-lactide-co-ε-caprolactone/calcium phosphate (CaP) were in-situ synthesized using two different polymer grades and synthesis pathways and compared to composites prepared by pre-formed (commercially available) CaP for delivery of the antibiotic moxifloxacin hydrochloride (MOX). Phase identification and characterization by Fourier transform infra-red (FTIR) spectroscopy, X-ray powder diffraction (XRPD) and scanning electron microscope (SEM) confirmed the successful formation of different CaP phases within the biodegradable polymer matrix. The selected in-situ formed CaP scaffold showed a sustained release for MOX for six weeks and adequate porosity. Cell viability study on MG-63 osteoblast-like cells revealed that the selected composite scaffold maintained the cellular proliferation and differentiation. Moreover, it was able to diminish the bacterial load, inflammation and sequestrum formation in the bones of OM-induced animals. The results of the present work deduce that the selected in-situ formed CaP composite scaffold is a propitious candidate for OM treatment, and further clinical experiments are recommended.

Polypeptide and glycosaminoglycan polysaccharide as stabilizing polymers in nanocrystals for a safe ocular hypotensive effect.

Improved ocular delivery of a poorly soluble anti-glaucoma drug, acetazolamide (ACZ), in a stable nanosuspension (NS) was the main target of the study. The anionic polypeptide, poly-γ-glutamic acid (PG) and the glycosaminoglycan, hyaluronic acid, were used to stabilize ACZ-NS prepared using the antisolvent precipitation (AS-PT) coupled with sonication technique. To endue in site biocompatibility with high tolerability, soya lecithin (SL) phospholipid has been also combined with polyvinyl alcohol (PVA). NS with uniform PS in the range 100-300 nm, high ζ > ±20 mV, and enhanced saturation solubility were produced. Targeting solvent removal with control on future particle growth, post-production processing of NS was done using spray drying. The carriers' composition and amount relative to ACZ-NS were optimized to allow for the production of a redispersible dry crystalline powder. Particles crystallinity was confirmed using X-ray powder diffraction (XRPD) and differential scanning calorimetry (DSC) in liquid and spray dried NS. The modified Draize test proved the safety and tolerability following application to rabbit eyes accompanying an efficient ocular hypotensive activity using a steroid glaucoma model.

Chitosan-calcium phosphate composite scaffolds for control of post-operative osteomyelitis: Fabrication, characterization, and in vitro-in vivo evaluation.

Osteomyelitis is a progressive inflammatory disease requiring prolonged systemic treatment with high antibiotic doses, and is very challenging to be treated. The use of locally applied antibiotics loaded on a biodegradable carrier at surgery sites is hypothesized to prevent post-operative osteomyelitis, while providing site-specific drug release. In this work, chitosan-based calcium phosphate composites were prepared and loaded with moxifloxacin hydrochloride. The in-situ formation of calcium phosphates within the composite was experimentally confirmed by Fourier transform infra-red spectroscopy, X-ray powder diffraction, and scanning electron microscopy. Results showed that the composites provided complete drug release over three days, and the selected composite formulation induced differentiation and proliferation of osteoblasts, while reducing bacterial count, inflammation and intra-medullary fibrosis in bone tissue specimens of osteomyelitis-induced animal model. Hence, we can conclude that the in situ prepared antibiotic-loaded calcium phosphate chitosan composite is promising in preventing post-operative osteomyelitis, and is worthy of clinical experimentation.

Hydrophilic versus hydrophobic porogens for engineering of poly(lactide-co-glycolide) microparticles containing risedronate sodium.

OBJECTIVE: The aim of this study was to investigate the effect of two mechanistically different porogens, namely: the hydrophilic hydroxy-propyl-ß-cyclodextrin and the hydrophobic porogens (mineral oil and corn oil) in producing open/closed pored engineered polylactide-co-glycolic-acid microspheres suitable for pulmonary delivery of risedronate sodium (RS). MATERIALS AND METHODS: Surface morphology of the microspheres was studied and they were characterized for entrapment efficiency (%EE), particle size, and porosity as well as aerodynamic and flow properties. Selected formulae were investigated for in vitro drug release and deposition behavior using next generation impactor. Furthermore, the safety of the free drug and the selected prepared systems was assessed by MTT viability test performed on Calu-3 cell line. RESULTS AND DISCUSSION: The current work revealed that HP-ß-CD produced open-pored microspheres, while oils produced closed pored microspheres. Modulation of preparation parameters generated porous RS microspheres with high %EE, sustained drug release profile up to 15 days, suitable geometric and aerodynamic particle sizes and excellent flow properties. The safety of HP-ß-CD systems was higher than the systems utilizing oil as porogen. CONCLUSION: Porogen type affected the behavior of the microspheres as demonstrated by the various characterization experiments, with microspheres prepared using HP-ß-CD being superior to those prepared using oils as porogens.

Comparative effects of different cosurfactants on sterile prednisolone acetate ocular submicron emulsions stability and release.

Pluronic F68 is a nonionic, thermogelling block copolymer showing a high dehydration resistance during autoclaving due to its high cloud point (>100 degrees C). Tween 80 (with cloud point of 72.5 degrees C), is a polyoxyethylene-based cosurfactant, susceptible to temperature because of a decrease in its solubility by temperature increase. This study was done to explore whether or not, when compared with Tween 80, Pluronic F68 could be used blindly as a suitable cosurfactant for the preparation of terminally sterilized ocular submicron emulsions containing a lipid soluble drug, prednisolone acetate (PA). Various oils of variable viscosities were also tried. The results proved that no prediction can be made based on previously known physico-chemical properties alone and that emulsion stability depends on the contribution of the various emulsion components including: oil, surfactant and cosurfactant, in addition to the drug properties.

Preparation, in vitro and in vivo evaluation of stomach-specific metronidazole-loaded alginate beads as local anti-Helicobacter pylori therapy.

Metronidazole (MZ), a common antibacterial drug used in treatment of H. pylori, was prepared in chitosan-treated alginate beads by the ionotropic gelation method. A (3x2x2) factorially designed experiment was used in which 3 viscosity-imparting polymers namely, methyl cellulose, carbopol 934P and kappa-carrageenan, 2 concentrations (0.2 and 0.4% w/v) of chitosan as encapsulating polymer and 2 concentrations (2.5 and 5% w/w) of the low density magnesium stearate as a floating aid were tested. The drug entrapment efficiency (%), the percent of floating beads and the time for 80% of the drug to be released (T(80%)) were the responses evaluated. The bead formula containing 0.5% kappa-carrageenan, 0.4% chitosan and 5% magnesium stearate showed immediate buoyancy, optimum drug entrapment efficiency and extended drug release. The histopathological examination of mice stomachs and in vivo H. pylori clearance tests were carried out by orally administering MZ floating alginate beads or MZ suspension, to H. pylori infected mice under fed conditions as a single daily dose for 3 successive days in different doses 5, 10, 15 and 20 mg/kg. The histopathological examination showed that groups receiving MZ in the form of floating alginate beads at doses 10, 15 and 20 mg/kg were better than the corresponding suspension form, regarding eradication of H. pylori infection. The in vivo H. pylori clearance tests showed that MZ floating beads with a dose of 15 mg/kg provided 100% clearance rate whereas the MZ suspension with a dose of 20 mg/kg gave only 33.33%.