Reallocation of cutaneous and global blood circulation during sauna bathing through a closed-loop model.

OBJECTIVE: Sauna bathing (SB) is an important strategy in cardiovascular protection, but there is no mathematical explanation for the reallocation of blood circulation during heat-induced superficial vasodilation. We sought to reveal such reallocation via a simulated hemodynamic model. METHODS: A closed-loop cardiovascular model with a series of electrical parameters was constructed. The body surface was divided into seven blocks and each block was modeled by a lumped resistance. These resistances were adjusted to increase skin blood flow (SBF), with the aim of reflecting heat-induced vasodilation during SB. Finally, the blood pressure was compared before and after SB, and the blood flow inside the aorta and visceral arteries were also analyzed. RESULTS: With increasing SBF in this model, the systolic, diastolic, and mean blood pressure in the arterial trunk decreased by 13-29, 18-36, and 19-37 mmHg, respectively. Despite the increase in the peak and mean blood flow in the arterial trunk, the diastolic blood flow reversal in the thoracic and abdominal aortas increased significantly. Nevertheless, the blood supply to the heart, liver, stomach, spleen, kidney, and intestine decreased by at least 25%. Moreover, the pulmonary blood flow increased significantly. CONCLUSION: Simulated heat-induced cutaneous vasodilation in this model lowers blood pressure, induces visceral ischemia, and promotes pulmonary circulation, suggesting that the present closed-loop model may be able to describe the effect of sauna bathing on blood circulation. However, the increase of retrograde flow in the aortas found in this model deserves further examination.

A comparison of different surfactants on foam stability in foam sclerotherapy in vitro.

OBJECTIVE: This article compares the effect of different surfactants on foam stability and determines the foam decay relationship, so that the suitability of surfactants in a clinical setting can be evaluated. METHODS: Five different surfactants were used to prepare sclerosing foam at room temperature using a liquid:gas ratio of 1:4 in vitro. Foam decay experiments were performed for each sample using a laboratory-made foaming apparatus, and the process was recorded using a video camera. The stability indices used included the drainage time, drainage rate, half-life, foam half-life volume, surfactant stability index, and foaming index. RESULTS: The sodium morrhuate foam was relatively more stable than the polidocanol foam, but exhibited weak foaming. After the addition of the surfactants, the foam half-life was less than 300 seconds. The effect of the surfactants on the stability of the sodium morrhuate foam was more pronounced. The surfactant stability indices could be arranged as follows: poloxamer 188 > Tween 80 > macrogol 4000 > propanediol > lecithin. However, the differences in the foaming indices were small. CONCLUSIONS: Of the five surfactants tested, poloxamer 188 has best performance to enhance sclerosing foam stability. The addition of the surfactants improved the stability of the sclerosing foams. It was observed that the relationships between the foam half-life and the surfactant stability index and the surfactant concentration follow the power law.