Nutrient removal and biomass production of marine microalgae cultured in recirculating aquaculture systems (RAS) water with low phosphate concentration.

This study was conducted to investigate the feasibility of microalgal biomass production and nutrient removal from recirculating aquaculture systems (RAS) water (RASW) with low phosphate concentration. For this purpose, Nannochloropsis oculata, Pavlova gyrans, Tetraselmis suecica, Phaeodactylum tricornutum, and their consortium were cultivated in RASW and RASW supplemented with vitamins (+V). Among them, N. oculata showed the maximum biomass production of 0.4 g/L in RASW. Vitamins supplementation significantly increased the growth of T. suecica from 0.16 g/L in RASW to 0.33 g/L in RASW + V. Additionally, T. suecica showed the highest nitrate (NO3-N) removal efficiency of 80.88 ± 2.08 % in RASW and 83.82 ± 2.08 % in RASW + V. Accordingly, T. suecica was selected for scaling up study of microalgal cultivation in RASW and RASW supplemented with nitrate (RASW + N) in 4-L airlift photobioreactors. Nitrate supplementation enhanced the growth of T. suecica up to 2.2-fold (day 15). The fatty acid nutritional indices in T. suecica cultivated in RASW and RASW + N showed optimal polyunsaturated fatty acids (PUFAs)/saturated fatty acid (SFAs), omega-6 fatty acid (n-6)/omega-3 fatty acid (n-3), indices of atherogenicity (IA), and thrombogenicity (IT)). Overall, the findings of this study revealed that despite low phosphate concentration, marine microalgae can grow in RASW and relatively reduce the concentration of nitrate. Furthermore, the microalgal biomass cultivated in RASW consisting of pigments and optimal fatty acid nutritional profile can be used as fish feed, thus contributing to a circular bioeconomy.

Dual valorization of coastal biowastes for tetracycline remediation and biomethane production: A composite assisted anaerobic digestion.

Harnessing coastal biowaste for dual valorization in water treatment and biofuel production holds paramount importance for sustainability and resource challenges. This study investigated the potential of engineered composite (CABC) derived from coastal biowaste-based materials for tetracycline (TC) removal and biomethane production. High-yield calcium carbonate (CaCO3; 95.65%; bivalve shells) and biochar (GA-BC; 41.50%; green macroalgae) were produced and used as precursors for CABC. The characterization results revealed presence of ß-CaCO3 and ν2-CO3 aragonite in CaCO3, and composite homogeneity was achieved. The CABC exhibited a maximum TC sorption capacity of 342.26 mg/g via synergistic sorption mechanisms (i.e., surface/pore filling, electrostatic attraction, calcium ion exchange, and chelation). Supplementation of anaerobic digestion process with GA-BC, CaCO3, and CABC was investigated via three consecutive cycles. Biochemical methane potential of glucose as a sole substrate was increased from 157.50 to 217.00, 187.00, and 259.00 mL-CH4, while dual substrate (glucose+TC) treatment was increased from 94.5 to 146.5, 129.0, and 153.00 mL-CH4 for GA-BC, CaCO3, and CABC, respectively. Moreover, system stability and TC removal were increased with the addition of GA-BC (40.90%), CaCO3 (16.30%), and CABC (53.70%). Therefore, this study exemplifies the circular bioeconomy approach, demonstrating the sustainable use of biowaste-derived composite for water treatment and biofuel production.

Removal and recovery of nutrients from septic tank wastewater using microalgae: Key factors and practical implications.

Treatment of septic tank wastewater (STWW) with high concentrations of ammonium (NH4+) and total phosphorus (TP), is challenging in decentralized areas. Utilizing microalgae for STWW treatment can simultaneously recover nutrients in the form of high-value microalgal biomass. However, despite the potential benefits, microalgal treatment of STWW is rarely reported. Therefore, this work utilized bench-scale photobioreactors (PBR) to investigate different factors that could affect microalgal cultivation in STWW and treatment efficiency. Accordingly, it was observed that suspended solids present in STWW did not significantly affect the microalgae growth and nutrient removal efficiencies in bubble column PBR. On the other hand, the effect of endemic microorganism could not be verified in this study due to observed fungal contamination and change in nutrient profile of STWW after autoclave. Nevertheless, the highest microalgal growth and nutrient removal efficiencies of NH4+-N = 79.14% and TP = 41.11% were observed within 14 days of photoautotrophic cultivation in raw STWW. Further, 25 days of upscaled photoautotrophic cultivation in 4-L bubble column PBR was performed to study biomass yield, nutrient removal kinetics, and nutrient removal efficiency. Consequently, 0.75 g‧L-1 dry biomass was produced with improved removal efficiency of NH4+-N (96.16%), and TP (69.57%). Elemental analysis of biomass revealed that 62.99 ± 1.46 mg‧L-1 TN and 11.41 ± 1.42 mg‧L-1 TP were recovered. Further, 1.02 geq carbon dioxide (CO2) was bio-fixed with every liter of STWW treated. The findings of this study revealed that microalgae can be successfully utilized for the removal and recovery of nutrients from STWW.

Enhanced production of bioactive compounds from marine microalgae Tetraselmis tetrathele under salinity and light stresses: A two-stage cultivation strategy.

This study leveraged the salinity and light intensity stresses during the stationary phase for enhancing the pigment contents and antioxidant capacity of Tetraselmis tetrathele. The highest pigments content was obtained in cultures under salinity stress (40 g L-1) illuminated using fluorescent light. Furthermore, the best inhibitory concentration (IC50) for scavenging the 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals was found as 79.53 µg mL-1 in ethanol extract and cultures under red LED light stress (300 µmol m-2 s-1). The highest antioxidant capacity in a ferric-reducing antioxidant power (FRAP) assay (1,778.6 µM Fe+2) was found in ethanol extract and cultures under salinity stress illuminated using fluorescent light. Maximum scavenging of the 2.2-diphenyl-1-picrylhydrazyl (DPPH) radical was found in ethyl acetate extracts under light and salinity stresses. These results indicated that abiotic stresses could enhance the pigment and antioxidant components of T. tetrathele, which are value-added compounds in the pharmaceutical, cosmetic, and food industries.

Biological active metabolites from microalgae for healthcare and pharmaceutical industries: A comprehensive review.

Microalgae are photoautotrophic microorganisms which comprise of species from several phyla. Microalgae are promising in producing a varieties of products, including food, feed supplements, chemicals, and biofuels. Medicinal supplements derived from microalgae are of a significant market in which compounds such as -carotene, astaxanthin, polyunsaturated fatty acids (PUFA) such as docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), and polysaccharides such as -glucan, are prominent. Microalgae species which are commonly applied for commercial productions include Isochrysis sp., Chaetoceros (Chlorella sp.), Arthrospira sp. (Spirulina Bioactive) and many more. In this present review, microalgae species which are feasible in metabolites production are being summarized. Metabolites produced by microalgae as well as their prospective applications in the healthcare and pharmaceutical industries, are comprehensively discussed. This evaluation is greatly assisting industrial stakeholders, investors, and researchers in making business decisions, investing in ventures, and moving the production of microalgae-based metabolites forward.

Effect of acute vs chronic stress on Polyhydroxybutyrate production by indigenous cyanobacterium.

Fossil-based plastic has become a global-threat due to its high stability and transformation into more lethal forms such as micro plastics with time. An alternative should be found to combat this global enemy. Polyhydroxybutyrate or PHB can be such an alternative to plastic. Present study explores the synthesis of PHB in Neowollea manoromense, using two different cultivation-approaches: acute and chronic stress. This study has used 6 carbon sources and 3 different level of phosphate to study the accumulation of PHB along with lipid, carbohydrate, and proteins. Highest PHB in chronic-stress was achieved under glucose supplementation without phosphate at 21st day (156.5 ± 22.5 µg/mg), whereas in acute-stress, it was achieved under acetate without phosphate (91.0 ± 2.7 µg/mg). Despite higher accumulation in chronic-stress, high PHB productivity was achieved in acute-stress. Principal Component Analysis suggests that all the variables were positively correlated with each other. Here we first report PHB accumulation in Neowollea manoromense. This study highlights that acute-stress can be a powerful tool in establishment of a sustainable cyanobacteria based bio refinery for PHB production.

The effects of light regime on carbon cycling, nutrient removal, biomass yield, and polyhydroxybutyrate (PHB) production by a constructed photosynthetic consortium.

Microalgae can add value to biological wastewater treatment processes by capturing carbon and nutrients and producing valuable biomass. Harvesting small cells from liquid media is a challenge easily addressed with biofilm cultivation. Three experimental photobioreactors were constructed from inexpensive materials (e.g. plexiglass, silicone) for hybrid liquid/biofilm cultivation of a microalgal-bacterial consortia in aquaculture effluent. Three light regimes (full-spectrum, blue-white, and red) were implemented to test light spectra as a process control. High-intensity full-spectrum light caused photoinhibition and low biomass yield, but produced the most polyhydroxybutyrate (PHB) (0.14 mg g-1); a renewable bioplastic polymer. Medium-intensity blue-white light was less effective for carbon capture, but removed up to 82 % of phosphorus. Low-intensity red light was the only net carbon-negative regime, but increased phosphorus (+4.98 mg/L) in the culture medium. Light spectra and intensity have potential as easily-implemented process controls for targeted wastewater treatment, biomass production, and PHB synthesis using photosynthetic consortia.

Growth of marine diatoms on aquaculture wastewater supplemented with nanosilica.

The aquaculture industry is a significant producer of highly nutritious food for the increasing global population. However, the wastewater generated from aquaculture ponds is an emerging global issue. The present study demonstrates the culturing of marine diatoms (Chaetoceros gracilis and Thalassiosira weissflogii) in different proportions of aquaculture wastewater (AQW) coupled with inductively coupled plasma nanosilica (ICP-SiO2) and further explores their biorefinery potential concomitant nutrient removal. Thalassiosira weissflogii showed maximum carbohydrate content (79.47 ± 0.21 mg g-1) in 10% and protein content (27.09 ± 0.21 mg g-1) in 30% AQW: ICP-SiO2. Chaetoceros gracilis showed maximum carbohydrate content (91.64 ± 0.11 mg g-1) in 50% and protein content (27.75 ± 0.05 mg g-1) in 10% AQW: ICP-SiO2 respectively. Additionally, Chaetoceros gracilis showed maximum nitrate uptake in 30%, phosphate in 50%, and ammonia in 50% AQW: ICP-SiO2. While Thalassiosira weissflogii showed maximum nitrate, phosphate, and ammonia removal efficiency in 50%, 50%, and 10% AQW: ICP-SiO2 respectively. The study draws attention towards the utilization of diatoms in AQW treatment, aquafeed potential thus imparting a global circular bioeconomy.

Genetic and non-genetic tailoring of microalgae for the enhanced production of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) - A review.

The myriad health benefits associated with eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) laid the path for their application in the functional foods and nutraceutical industries. Fish being primarily exploited for extraction of EPA and DHA are unsustainable sources; thus, oleaginous microalgae turn out to be an alternative sustainable source. This review paper aims to provide the recent developments in the context of enhancing EPA and DHA production by utilising non-genetic tailoring and genetic tailoring methods. We have also summarized the legislation, public perception, and possible risks associated with the usage of genetically modified microalgae focusing on EPA and DHA production.

Deciphering functional biomolecule potential of marine diatoms through complex network approach.

Marine diatoms are unique reservoirs of bioactive compounds having enormous applications in therapeutics. But high-throughput screening methods are needed to elucidate the interaction between numerous biomolecules and their targets, facilitating rapid screening for novel drug molecules. So, in the present study chemical constituents were extracted from five marine diatoms using un-targeted metabolite profiling and in-silico virtual screening bioinformatics was employed to predict their bioactivity and molecular targets. A total of 17 chemical constituents out of 51 showed interactions with 76 protein targets associated with 213 pathways. Ingredient-target-pathway network revealed oleic acid, linoleic acid and cholest-5-en-3-ol as major active constituents. Core subnetwork and protein association network showed involvement of these compounds in key metabolic pathways related to cell signaling, cell growth and metabolism of xenobiotics. Thus, the present study for the first time revealed the main active ingredients and their associated pathways from marine diatoms using complex network approach.

Clay-polymer nanocomposites: Progress and challenges for use in sustainable water treatment.

Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.

Waste-derived compost and biochar amendments for stormwater treatment in bioretention column: Co-transport of metals and colloids.

Bioretention systems, as one of the most practical management operations for low impact development of water recovery, utilize different soil amendments to remove contaminants from stormwater. For the sake of urban sustainability, the utilization of amendments derived from waste materials has a potential to reduce waste disposal at landfill while improving the quality of stormwater discharge. This study investigated the efficiency of food waste compost and wood waste biochar for metal removal from synthetic stormwater runoff under intermittent flow and co-presence of colloids. Throughout intermittent infiltration of 84 pore volumes of stormwater, columns amended with compost and biochar removed more than 50-70% of influent metals, whereas iron-oxide coated sand was much less effective. Only a small portion of metals adsorbed on the compost (< 0.74%) was reactivated during the drainage of urban pipelines that do not flow frequently, owing to abundant oxygen-containing functional groups in compost. In comparison, co-existing kaolinite enhanced metal removal by biochar owing to the abundance of active sites, whereas co-existing humic acid facilitated mobilization via metal-humate complexation. The results suggest that both waste-derived compost and biochar show promising potential for stormwater harvesting, while biochar is expected to be more recalcitrant and desirable in field-scale bioretention systems.

Synthesis of zerovalent iron from water treatment residue as a conjugate with kaolin and its application for vanadium removal.

This study was aimed at examining the possible utilization of iron-rich groundwater treatment sludge in the synthesis of zerovalent iron (ZVI) as a conjugate with kaolin clay (Slu-KZVI), and its application for vanadium adsorption from aqueous solutions. Iron was extracted from the sludge using 1 M HCl and was used in ZVI synthesis by the sodium borohydride reduction method. The characteristics and performance of Slu-KZVI were compared to a kaolin modified with synthetic iron (FeCl3·6H2O) (Syn-KZVI). Adsorption results showed a competitive performance by both classes of KZVI, with Syn-KZVI slightly outperforming Slu-KZVI. X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron microscopy confirmed the formation of Fe0 on the core-shell structure of both modified adsorbents. In addition, the surface analysis of Slu-KZVI indicated the presence of P and Ca to a small extent, originating from the sludge. Both classes of sorbents performed better in solutions with acidic and neutral pH values (3-7). Surface complexation was thought to be the primary mechanism whereas simultaneous V(V) reduction and Fe oxidation (redox) reactions may also have taken place to some extent. A sorption test with groundwater confirmed that adsorbents were able to reduce vanadium to a very low concentration.

Phytoremediation potential of vetiver grass irrigated with wastewater for treatment of metal contaminated soil.

A field experiment was conducted to understand the potential of vetiver grass (Vetiveria zizanioides) in heavy metal uptake from the soil and wastewater. Four main irrigation treatments including T1 (treated industrial wastewater), T2 (1:1 ratio of municipal:industrial wastewater), T3 (treated municipal wastewater) and T4 (fresh water) were applied. Moreover, the effect of arbuscular mycorrhizal fungus (AMF), Glomus mosseae, on plant growth and heavy metal concentration was evaluated. Three main criteria including bioconcentration factor (BCF), translocation factor (TF) and heavy metal uptake were applied to assess the potential of vetiver grass in accumulation and translocation of heavy metals to aerial parts. The highest concentration of heavy metals was found in plant and soil irrigated with T1 treatment followed by T2, T3 and the lowest concentrations were found in T4 treatment. Irrigation with treated municipal wastewater led to a significant increase in plant biomass and heavy metal uptake compared to other treatments. In T1 treatment (industrial wastewater), vetiver grass caused a significant decrease in Zn, Fe, Cu, Cd and Pb concentrations in soil as compared to no-plant treatment (without planting vetiver grass). Therefore, vetiver grass, irrigated with treated industrial wastewater, is a promising method for the development of urban and industrial green space.

Probabilistic risk assessment of exposure to fluoride in most consumed brands of tea in the Middle East.

The aim of this study was to evaluate the fluoride concentration in seven most consumed brands of tea in the Middle East which was imported to Iran through Zabol County. In the present study, the health risk of exposure to fluoride was estimated using a probabilistic approach. Monte Carlo simulation and sensitivity analysis were applied to quantify uncertainties in risk estimation. The highest mean and 95th percentile of chronic daily intake (CDI) was observed for children group. Iranian tea and Kenya tea had maximum CDI and target hazard quotient (THQ) values among studied brands of tea which followed by Green tea, Taksetare tea, Ceylan tea, Red tea, and White tea. These result indicated that there were significant risks of exposure to fluoride in most of studied brands of tea for children (THQ>1). Sensitivity analysis showed that fluoride concentration and daily intake were the most influential variables in three exposed populations. In conclusion, the fluoride concentration in some studied brands of tea is high and it put children at risk risks of exposure to fluoride.

Efficient removal of toxic phosphate anions from aqueous environment using pectin based quaternary amino anion exchanger.

Pectin based quaternary amino anion exchanger (Pc-QAE) was prepared using simple crosslinking polymerization method. This anion exchanger was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Pc-QAE was applied for the removal of phosphate anion from the aqueous solution. The adsorption process which was pH dependent showed maximum adsorption of phosphate anions at pH 7. Pc-QAE showed good monolayer adsorption capacity for phosphate anions which demonstrated its good capability towards Langmuir isotherm model. Moreover, the adsorption was evaluated thermodynamically and the negative value of Gibbs free energy (-1.791KJ/mol) revealed the spontaneity of adsorption process. The value of ΔH° and ΔS° were found to be 15.28 and 49.48KJ/mol, respectively representing the endothermic nature and enhancement in degree of freedom due to the adsorption process.

Valorization of solid waste products from olive oil industry as potential adsorbents for water pollution control--a review.

The global olive oil production for 2010 is estimated to be 2,881,500 metric tons. The European Union countries produce 78.5% of the total olive oil, which stands for an average production of 2,136,000 tons. The worldwide consumption of olive oil increased of 78% between 1990 and 2010. The increase in olive oil production implies a proportional increase in olive mill wastes. As a consequence of such increasing trend, olive mills are facing severe environmental problems due to lack of feasible and/or cost-effective solutions to olive-mill waste management. Therefore, immediate attention is required to find a proper way of management to deal with olive mill waste materials in order to minimize environmental pollution and associated health risks. One of the interesting uses of solid wastes generated from olive mills is to convert them as inexpensive adsorbents for water pollution control. In this review paper, an extensive list of adsorbents (prepared by utilizing different types of olive mill solid waste materials) from vast literature has been compiled, and their adsorption capacities for various aquatic pollutants removal are presented. Different physicochemical methods that have been used to convert olive mill solid wastes into efficient adsorbents have also been discussed. Characterization of olive-based adsorbents and adsorption mechanisms of various aquatic pollutants on these developed olive-based adsorbents have also been discussed in detail. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.

Precipitation of dissolved sulphide in pulp and paper mill wastewater by electrocoagulation.

The precipitation of dissolved sulphide ions by electrocoagulation was studied at laboratory scale using pulp and paper mill wastewaters. Concentrations of dissolved organic carbon and phosphorus were analysed before and after the electrocoagulation process to examine the suitability of the process for treatment of sulphide odour from pulp and paper mill wastewater. The electrochemical cell used in this study was constructed from monopolar dissolving iron electrodes. The dissolved iron concentration was directly proportional to the applied electric charge (C/L) at the tested current densities. Electrochemically produced ferrous iron (Fe2+) precipitated dissolved sulphide ions efficiently. Electricity consumption of the treatment was 4-8 C/mg S(2-) while iron consumption was 1.1-2.2 mg/mg S(2-) during the initial phase of the sulphide precipitation when the applied electric charge was 10-60 C/L. When 60 C/L was applied, 88% of dissolved sulphides and 40% of phosphorus was precipitated. The reduction in DOC was low during the sulphide precipitation. According to these results, electrocoagulation can precipitate dissolved sulphides effectively and thereby reduce sulphide odours of pulp and paper mill wastewaters.

A review of the use of red mud as adsorbent for the removal of toxic pollutants from water and wastewater.

Red mud (an aluminium industry waste) has received wide attention as an effective adsorbent for water pollution control, showing significant adsorption potential for the removal of various aquatic pollutants. In this review, an extensive list of red-mud-based adsorbents has been compiled and their adsorption capacities (maximum uptake value of the adsorbent for the pollutant or adsorbate being removed) for various aquatic pollutants (metal ions, dyes, phenolic compounds, inorganic anions) are presented. The review provides a summary of recent information obtained using batch studies and deals with the adsorption mechanisms involved. It is evident from the literature survey that red mud has been found to be efficient for the removal of various aquatic pollutants, especially arsenic and phosphate. However, there is still a need to investigate the practical utility of these adsorbents on a commercial scale.

Defluoridation from aqueous solutions by nano-alumina: characterization and sorption studies.

The present study was conducted to evaluate the feasibility of nano-alumina (Al(2)O(3)) for fluoride adsorption from aqueous solutions. The nature and morphology of pure and fluoride-sorbed nano-alumina were characterized by SEM with EDX, XRD, and FTIR analysis. Batch adsorption studies were performed as a function of contact time, initial fluoride concentration, temperature, pH and influence of competing anions. Fluoride sorption kinetics was well fitted by pseudo-second-order model. The maximum sorption capacity of nano-alumina for fluoride removal was found to be 14.0 mg g(-1) at 25°C. Maximum fluoride removal occurred at pH 6.15. The fluoride sorption has been well explained using Langmuir isotherm model. Fluoride sorption was mainly influenced by the presence of PO(4)(3-), SO(4)(2-) and CO(3)(2-) ions.