Novel isochoric impregnation to develop high-quality and nutritionally fortified plant materials (apples and sweet potatoes).

Isochoric impregnation was explored as a novel pressure-assisted infusion technique to fortify plant materials with bioactive compounds. Apple and potato cylinders were impregnated with a sucrose solution containing 4% ascorbic acid (AA) while freezing under isochoric conditions. Isochoric impregnation resulted in greater infusion of AA compared to infusion at atmospheric pressure, which demonstrated the feasibility of this impregnation technology. Processing temperatures (-3°C and -5°C) and processing times (1, 3, and 5 h) significantly affected the AA infusion. The AA content values ranged from 446 to 516 mg/100 g for apples and 322 to 831 mg/100 g for sweet potatoes under isochoric conditions. For both plant materials, isochoric impregnation at -3°C did not cause major changes in texture and microstructure of the biological tissues. These results indicated that isochoric impregnation of solid foods could be a feasible technology for infusion of bioactive compounds without significantly altering their matrix. PRACTICAL APPLICATION: The findings of this study showed that the use of isochoric impregnation as a fortification technique is a promising way to develop fresh-like and value-added products with improved nutrition during preservation at subfreezing temperatures.

Reducing synthetic colorants release from alginate-based liquid-core beads with a zein shell.

An innovative method to reduce hydrophilic synthetic colorant release at interface was presented in this work, based on the anti-solvent effect at the membrane outside surface of liquid-core beads manufactured by reverse spherification between alginate and calcium ion. Zein, a hydrophobic protein which formed precipitation shell ensured the stability of colorant. Acidification of solvent made zein particles more kinetically stable, allowed zein stretching and collated more orderly secondary structures even in high polarity solvents. Colorants that hydrogen bonded or electrostatically interacted with zein could have optimized release properties. The zein/erythrosine samples had the most orderly secondary structure from circular dichroism and had the highest stability among all zein/colorant systems. The release rate of erythrosine was only 2.76% after 48 h storage after soaking in zein shell solution. This study demonstrated a promising clean and scalable strategy to encapsulate hydrophilic compounds in zein-based shells of liquid-core beads for food, supplement and pharmaceutical applications.

Effect of isochoric freezing on quality aspects of minimally processed potatoes.

The enhanced interest in greater convenience foods has recently led to the expansion of minimally processed potato products. This study investigated the effects of isochoric freezing on pre-peeled potato cubes, including quality attributes (microstructure, texture, and color), nutritional value (ascorbic acid (AA) content, total phenolic content, and antioxidant capacity), and polyphenol oxidase activity. Isochoric freezing (-3 °C/30 MPa) was compared with isobaric freezing (-3 °C/0.1 MPa) and individual quick freezing followed by frozen storage at -20 °C for 4 weeks. The isochoric sample had lower drip loss and volume shrinkage as well as better preserved texture and microstructure than the other samples. All freezing methods caused an increase in total phenolic content and antioxidant capacity, but a decrease in AA content. Also, all freezing methods caused browning of the thawed potatoes, but isochoric freezing delayed its onset for more than 1 week. PRACTICAL APPLICATION: Results showed that isochoric freezing of pre-peeled and cut potatoes caused less freeze damage than isobaric and individual quick freezing, which might find application in the commercial preservation of minimally processed food products.

Antimicrobial Carvacrol in Solution Blow-Spun Fish-Skin Gelatin Nanofibers.

Carvacrol is a volatile monoterpenic phenol and main component of oregano essential oil that shows nonspecific antimicrobial activity against foodborne pathogenic bacteria. Fish-skin gelatin (FSG) nanofibers encapsulating carvacrol (15%, 20%, 25%, and 30%, w/w FSG) were successfully prepared via solution blow-spinning (SBS) technique using lecithin (2.475% wb) as the surfactant. FSG emulsions with lower carvacrol ratios (5% and 10%) showed higher values in particle size and surface tension as well as lower values in viscosity and modulus, which led to failure of maintaining nanofibers shape. The formed carvacrol-FSG nanofibers showed round and smooth morphologies with average fiber diameters ranging from 103.2 to 138.1 nm as the carvacrol ratio increased from 15% to 30%. Carvacrol was evenly dispersed within the interior of nanofiber matrix. All carvacrol-FSG nanofibers showed inhibitive effects against the growth of Escherichia coli, Salmonella enterica, and Listeria monocytogenes. Moreover, nanofibers with lower carvacrol ratios showed bigger inhibition zones for E. coli and L. monocytogenes (20 mm compared with 12.5 mm for lowest to highest carvacrol ratios, respectively). Nanofibers stored at 20 °C (51% RH) showed better retention (40% to 60%) for carvacrol during the first 4 weeks of storage, while nanofibers stored at 2 °C (70% RH) showed better retention (10% to 30%) at the end of storage. PRACTICAL APPLICATION: Results obtained in the study may help with antimicrobial carvacrol addition levels for gelatin fiber preparation using solution blow spinning (SBS) method. SBS gelatin fibers with added antimicrobials have potential applications for food packaging and medical wound dressing.

Physical and antibacterial properties of açaí edible films formulated with thyme essential oil and apple skin polyphenols.

UNLABELLED: Thyme essential oil (TEO) and apple skin polyphenols (ASP) are natural compounds considered as generally recognized as safe by FDA, with biological effects against bacteria and fungi. This work aimed to evaluate physical and antimicrobial properties of açaí edible films formulated with TEO and ASP at 3% and 6% (w/w) individually or combined at 3% (w/w) each. Physical properties studied include mechanical resistance, water vapor permeability (WVP), color, and thermal resistance. Antimicrobial activity against Listeria monocytogenes was determined using the overlay diffusion test. Addition of ASP resulted in improved mechanical properties. TEO at 6% (w/w) resulted in increased elongation. ASP films had significant higher WVP than control film. ASP films were lighter and had more red color than other films. Incorporation of ASP resulted in improved film thermal stability, whereas TEO caused rapid thermal decomposition. Presence of clusters was observed on the surface of films. Addition of ASP resulted in a smoother surface, whereas addition of TEO led to the formation of crater-like pits on the film surface. Açaí edible film incorporated with 6% (w/w) TEO presented the highest antimicrobial activity. However, both antimicrobials are necessary in the açaí films in order to obtain edible films with suitable physical-mechanical properties. The results of the present study showed that TEO and ASP can be used to prepare açaí edible films with adequate physical-mechanical properties and antimicrobial activity for food applications by direct contact. PRACTICAL APPLICATION: Developed açaí edible films presented antimicrobial activity against L. monocytogenes and good physical-mechanical properties, showing the potential use of açaí edible films in food preservation.

Biodegradable pectin/clay aerogels.

Biodegradable, foamlike materials based on renewable pectin and sodium montmorillonite clay were fabricated through a simple, environmentally friendly freeze-drying process. The addition of multivalent cations (Ca(2+) and Al(3+)) resulted in apparent cross-linking of the polymer and enhancement of aerogel properties. The compressive properties increased as the solid contents (both pectin and clay) increased; moduli in the range of 0.04-114 MPa were obtained for materials with bulk densities ranging from 0.03 g/cm(3) to 0.19 g/cm(3), accompanied by microstructural changes from a lamellar structure to a cellular structure. Biodegradability of the aerogels was investigated by detecting CO2 release for 4 weeks in compost media. The results revealed that pectin aerogels possess higher biodegradation rates than wheat starch, which is often used as a standard for effective biodegradation. The addition of clay and multivalent cations surprisingly increased the biodegradation rates.