An Oral 3D Printed PLGA-Tocopherol PEG Succinate Nanocomposite Hydrogel for High-Dose Methotrexate Delivery in Maintenance Chemotherapy.

High-dose methotrexate (HDMTX) is one of the chemotherapeutic agents used to treat a variety of cancers in both adults and children. However, the toxicity associated with HDMTX has resulted in the spread of infections and treatment interruption. Further, poor bioavailability due to efflux pump activities mediated by P-glycoprotein has also been linked to poor therapeutic effects of methotrexate following oral administrations. D-α-Tocopheryl poly-ethylene glycol 1000 succinate (TPGS) is known to improve the bioavailability of poorly soluble drugs by inhibiting P-gp efflux activities, thus enhancing cellular uptake. Therefore, to achieve improved bioavailability for MTX, this study aimed to design and develop a novel drug delivery system employing TPGS and a biodegradable polymer, i.e., PLGA, to construct methotrexate-loaded nanoparticles fixated in alginate-gelatine 3D printable hydrogel ink to form a solid 3D printed tablet for oral delivery. The results indicated that high accuracy (>95%) of the 3D printed tablets was achieved using a 25 G needle. In vitro, drug release profiles were investigated at pH 1.2 and pH 7.4 to simulate the gastrointestinal environment. The in vitro release profile displayed a controlled and prolonged release of methotrexate over 24 h. The in silico modeling study displayed P-gp ATPase inhibition, suggesting enhanced MTX absorption from the gastrointestinal site. The 3D-printed hydrogel-based tablet has the potential to overcome the chemotherapeutic challenges that are experienced with conventional therapies.

Fabrication and Characterisation of a Photo-Responsive, Injectable Nanosystem for Sustained Delivery of Macromolecules.

The demand for biodegradable sustained release carriers with minimally invasive and less frequent administration properties for therapeutic proteins and peptides has increased over the years. The purpose of achieving sustained minimally invasive and site-specific delivery of macromolecules led to the investigation of a photo-responsive delivery system. This research explored a biodegradable prolamin, zein, modified with an azo dye (DHAB) to synthesize photo-responsive azoprolamin (AZP) nanospheres loaded with Immunoglobulin G (IgG). AZP nanospheres were incorporated in a hyaluronic acid (HA) hydrogel to develop a novel injectable photo-responsive nanosystem (HA-NSP) as a potential approach for the treatment of chorio-retinal diseases such as age-related macular degeneration (AMD) and diabetic retinopathy. AZP nanospheres were prepared via coacervation technique, dispersed in HA hydrogel and characterised via infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Size and morphology were studied via scanning electron microscopy (SEM) and dynamic light scattering (DLS), UV spectroscopy for photo-responsiveness. Rheological properties and injectability were investigated, as well as cytotoxicity effect on HRPE cell lines. Particle size obtained was <200 nm and photo-responsiveness to UV = 365 nm by decreasing particle diameter to 94 nm was confirmed by DLS. Encapsulation efficiency of the optimised nanospheres was 85% and IgG was released over 32 days up to 60%. Injectability of HA-NSP was confirmed with maximum force 10 N required and shear-thinning behaviour observed in rheology studies. In vitro cell cytotoxicity effect of both NSPs and HA-NSP showed non-cytotoxicity with relative cell viability of ≥80%. A biocompatible, biodegradable injectable photo-responsive nanosystem for sustained release of macromolecular IgG was successfully developed.

Synthesis and Properties of CurNQ for the Theranostic Application in Ovarian Cancer Intervention.

Synthesis of a novel theranostic molecule for targeted cancer intervention. A reaction between curcumin and lawsone was carried out to yield the novel curcumin naphthoquinone (CurNQ) molecule (2,2'-((((1E,3Z,6E)-3-hydroxy-5-oxohepta-1,3,6-triene-1,7-diyl) bis(2-methoxy-4,1-phenylene))bis(oxy))bis(naphthalene-1,4-dione). CurNQ's structure was elucidated and was fully characterized. CurNQ was demonstrated to have pH specific solubility, its saturation solubility increased from 11.15 µM at pH 7.4 to 20.7 µM at pH 6.8. This pH responsivity allows for cancer targeting (Warburg effect). Moreover, CurNQ displayed intrinsic fluorescence, thus enabling imaging and detection applications. In vitro cytotoxicity assays demonstrated the chemotherapeutic properties of CurNQ as CurNQ reduced cell viability to below 50% in OVCAR-5 and SKOV3 ovarian cancer cell lines. CurNQ is a novel theranostic molecule for potential targeted cancer detection and treatment.

Synthesis and Evaluation of a Sodium Alginate-4-Aminosalicylic Acid Based Microporous Hydrogel for Potential Viscosupplementation for Joint Injuries and Arthritis-Induced Conditions.

A microporous hydrogel was developed using sodium alginate (alg) and 4-aminosalicylic acid (4-ASA). The synthesized hydrogel was characterized using various analytical techniques such as Fourier transform infrared spectroscopy (FTIR), Carbon-13 nuclear magnetic resonance (13C-NMR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). Additonal carboxyl and hydroxyl functional groups of 4-ASA provided significant lubrication and stress-triggered sol-gel transition to the conjugated hydrogel. In addition, cytotoxicity analysis was undertaken on the conjugated hydrogel using human dermal fibroblast-adult (HDFa) cells, displaying non-toxic characteristics. Drug release profiles displaying 49.6% in the first 8 h and 97.5% within 72 h, similar to the native polymer (42.8% in first 8 h and 90.1% within 72 h). Under applied external stimuli, the modified hydrogel displayed significant gelling properties and structure deformation/recovery behaviour, confirmed using rheological evaluation (viscosity and thixotropic area of 8095.3 mPas and 26.23%, respectively). The modified hydrogel, thus, offers great possibility for designing smart synovial fluids as a biomimetic aqueous lubricant for joint-related injuries and arthritis-induced conditions. In addtion, the combination of thixotropy, non-toxicity, and drug release capabilities enables potential viscosupplementation for clinical application.

Poly(ethylene glycol) enclatherated pectin-mucin submicron matrices for intravaginal anti-HIV-1 drug delivery.

This paper explores the potential of polyethylene glycol enclatherated pectin-mucin (PEG-encl-PEC:MUC) submicron matrices (SMMs) as an intravaginal drug delivery system capable of delivering an anti-HIV-1 agent (zidovudine; AZT) over a prolonged duration. A three factor and three level (3(3)) Box-Behnken statistical design was employed to optimize the SMMs. Optimized PEG-encl-PEC:MUC SMMs prepared as a stable W/O emulsion (determined by the degree of reversible colloidal phenomena) were spherical with a mean particle size of 270.6 ± 5.533 nm and mean zeta potential of -34.4 ± 0.539 mV. The microencapsulation of AZT and the hydrogen bonding mediated shielding of AZT by SMMs was confirmed by Fourier Transform Infrared (FTIR) analysis. The thermochemical (differential scanning calorimetry and thermogravimetric analysis) data proposed that Ca(2+)-based macromolecular ionic crosslinking as well as the intermolecular interactions may be responsible for the thermal stability of the delivery system. The partially amorphous nature of drug-loaded SMMs, as confirmed by X-ray diffraction patterns, further strengthened the matricization of AZT into the pectin-mucin matrix. In vitro drug release studies from the SMMs showed approximately 91% zidovudine release in simulated vaginal fluid (SVF) and 94% in phosphate buffered saline (PBS) in 24h. The mean dissolution time (MDT) of zidovudine from the SMMs was 5.974 h. The attainment of required dimensional structure and drug release profiles from SMMs highlights the potential of their inclusion into a secondary carrier system for extended and controlled intravaginal stay.

Ex vivo evaluation of a microneedle array device for transdermal application.

A new approach of transdermal drug delivery is the use of microneedles. This promising technique offers the potential to be broadly used for drug administration as it enables the dramatic increase in permeation of medicaments across the stratum corneum. The potential of microneedles has evolved to spawn a plethora of potential transdermal applications. In order to advance the microneedle capabilities and possibly revolutionize advanced drug delivery, this study introduces a novel transdermal electro-modulated hydrogel-microneedle array (EMH-MNA) device composed of a nano-porous, embeddable ceramic microneedle array as well as an optimized EMH for the electro-responsive delivery of indomethacin through the skin. The ex vivo permeation as well as drug release experiments were performed on porcine skin tissue to ascertain the electro-responsive capabilities of the device. In addition, the microbial permeation ability of the microneedles across the viable epidermis in both microneedle-punctured skin as well as hypodermic needle-punctured skin was determined. Ex vivo evaluation of the EMH-MNA device across porcine skin demonstrated that without electro-stimulation, significantly less drug release was obtained (±0.4540mg) as compared to electro-stimulation (±2.93mg).

In vivo evaluation of a mucoadhesive polymeric caplet for intravaginal anti-HIV-1 delivery and development of a molecular mechanistic model for thermochemical characterization.

CONTEXT AND OBJECTIVE: The aim of this study was to develop, characterize and evaluate a mucoadhesive caplet resulting from a polymeric blend (polymeric caplet) for intravaginal anti-HIV-1 delivery. MATERIALS AND METHODS: Poly(lactic-co-glycolic) acid, ethylcellulose, poly(vinylalcohol), polyacrylic acid and modified polyamide 6, 10 polymers were blended and compressed to a caplet-shaped device, with and without two model drugs 3'-azido-3'-deoxythymidine (AZT) and polystyrene sulfonate (PSS). Thermal analysis, infrared spectroscopy and microscopic analysis were carried out on the caplets employing temperature-modulated DSC (TMDSC), Fourier transform infra-red (FTIR) spectrometer and scanning electron microscope, respectively. In vitro and in vivo drug release analyses as well as the histopathological toxicity studies were carried out on the drug-loaded caplets. Furthermore, molecular mechanics (MM) simulations were carried out on the drug-loaded caplets to corroborate the experimental findings. RESULTS AND DISCUSSION: There was a big deviation between the Tg of the polymeric caplet from the Tg's of the constituent polymers indicating a strong interaction between constituent polymers. FTIR spectroscopy confirmed the presence of specific ionic and non-ionic interactions within the caplet. A controlled near zero-order drug release was obtained for AZT (20 d) and PSS (28 d). In vivo results, i.e. the drug concentration in plasma ranged between 0.012-0.332 mg/mL and 0.009-0.256 mg/mL for AZT and PSS over 1-28 d. CONCLUSION: The obtained results, which were corroborated by MM simulations, attested that the developed system has the potential for effective delivery of anti-HIV-agents.

Prolonged delivery of ciprofloxacin and diclofenac sodium from a polymeric fibre device for the treatment of periodontal disease.

In vitro analysis of drug release and antimicrobial activity of the coblended crosslinked polymeric fibre device (PFD) were investigated. The fibre loaded with ciprofloxacin and diclofenac sodium was comprised of alginate and glycerol crosslinked with barium cations. The pH dependent drug release was evident with ciprofloxacin and diclofenac sodium diffusing from the fibre at pH 4.0 compared to pH 6.8, where the fibre swelled and eroded resulting in zero-order drug release. Agar diffusion studies followed by minimum inhibitory assays were conducted to determine the antimicrobial activity of the device against Escherichia coli, Enterococcus faecalis, and Streptococcus mutans. The antimicrobial activity of the PFD was confirmed in both test assays against all test pathogens. The MIC ranges at pH 4.0 for E. coli, E. faecalis, and S. mutans were 0.5-0.8, 0.4-1.1, and 0.7-2.1 µg/mL, respectively. At pH 6.8, similar efficacies (0.3-0.5 µg/mL for E. coli and E. faecalis and 0.6-1.0 µg/mL for S. mutans) were observed. The effect of varying the plasticizer and crosslinking ion concentration on drug release profile of the fibers was further elucidated and conceptualized using molecular mechanics energy relationships (MMER) and by exploring the spatial disposition of geometrically minimized molecular conformations.

A novel multilayered multidisk oral tablet for chronotherapeutic drug delivery.

A Multilayered Multidisk Tablet (MLMDT) comprising two drug-loaded disks enveloped by three drug-free barrier layers was developed for use in chronotherapeutic disorders, employing two model drugs, theophylline and diltiazem HCl. The MLMDT was designed to achieve two pulses of drug release separated by a lag phase. The polymer disk comprised hydroxyethylcellulose (HEC) and ethylcellulose (EC) granulated using an aqueous dispersion of EC. The polymeric barrier layers constituted a combination of pectin/Avicel (PBL) (1st barrier layer) and hydroxypropylmethylcellulose (HPMC) (HBL1 and HBL2) as the 2nd and 3rd barrier layers, respectively. Sodium bicarbonate was incorporated into the diltiazem-containing formulation for delayed drug release. Erosion and swelling studies confirmed the manner in which the drug was released with theophylline formulations exhibiting a maximum swelling of 97% and diltiazem containing formulations with a maximum swelling of 119%. FTIR spectra displayed no interactions between drugs and polymers. Molecular mechanics simulations were undertaken to predict the possible orientation of the polymer morphologies most likely affecting the MLMDT performance. The MLMDT provided two pulses of drug release, separated by a lag phase, and additionally it displayed desirable friability, hardness, and uniformity of mass indicating a stable formulation that may be a desirable candidate for chronotherapeutic drug delivery.

Exploration of the biomacromolecular interactions of an interpenetrating proteo-saccharide hydrogel network at the mucosal interface.

The relationship between mucin (MUC) and pectin (PEC) was explored in an attempt to understand the biomacromolecular interactions that occur at mucosal surfaces when mucus membranes are exposed to PEC-based materials. These interactions were explored through techniques, such as attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, SEM imagery of lyophilized MUC-PEC blends, thermodynamic analysis, rheology investigations, and in silico static lattice atomistic simulations using a molecular mechanics energy relationships (MMER) approach. Three types of PEC that had different degrees of esterification and degrees of amidation were investigated at different MUC-PEC mass ratios (1:0, 1:1, 1:4, 1:9, and 0:1). The effect PEG 400 and Ca(2 +) in the MUC-PEC interactions were also studied. ATR-FTIR spectroscopy revealed broadening and strengthening of FTIR peaks at 3363 cm(-1) and between 3000-3650 cm(-1) due to stretching vibrations of the -OH, -COOH groups on MUC and PEC as well as the -N-H group on MUC. This suggested significant intra- and inter-molecular H-bonding. Morphologically, MUC-rich scaffolds were porous, thin, and multidirectional compared with the smooth, rigid, and unidirectional PEC-rich scaffolds. The Flory-Huggins interaction parameter (χ12 ) for all MUC-PEC mass ratios was negative, thus confirming MUC-PEC miscibility and interactions. UV absorbance increased with increasing relative concentration of PEC in the aqueous MUC-PEC dispersions. Furthermore, rheology investigations demonstrated synergistic enhancement in viscosity (η) and dynamic moduli upon the addition of PEG 400 and Ca(2 +) . MMER analysis revealed several key MUC-PEC interactions that corroborated well with the experimental data. Notably, higher esterification and larger mass ratios of PEC yielded greater MUC-PEC interactions.

A novel stimuli-synchronized alloy-treated matrix for space-defined gastrointestinal delivery of mesalamine in the Large White pig model.

The study focussed on designing a Stimuli-Synchronized Matrix (SSM) for space-defined colonic delivery of the anti-inflammatory drug mesalamine. The configured matrix provided time-independent delivery and stimuli targeting. Formulations were optimized according to a Box-Behnken experimental design that constituted mesalamine-loaded BaSO4-crosslinked chitosan dispersed within a pectin, carboxymethylcellulose and xanthan gum complex. The complex was compressed into matrices and subsequently alloy-treated with pectin and ethylcellulose. In vitro drug release was determined in the presence and absence of colonic enzymes and the mean dissolution time was used for formulation optimization. To mechanistically elucidate the synchronous catalytic action of the enzymes pectinase and glucosidase on the matrix, computer-aided 3D modelling of active fractions of the enzyme-substrate complexes was generated to predict the orientation of residues affecting the substrate domain. Drug release profiles revealed distinct colonic enzyme responsiveness with fractions of 0.402 and 0.152 of mesalamine released in the presence and absence of enzymes, respectively after 24h. The commercial comparator product showed irreproducible release profiles over the same period (SD=0.550) compared to the SSM formulation (SD=0.037). FTIR spectra of alloy-treated matrices showed no peaks from 1589 to 1512cm(-1) after colonic enzyme exposure. With increasing enzyme exposure there were also no peaks between 1646 and 1132cm(-1). This indicated polymeric enzyme cleavage for controlled and space-defined release of mesalamine. Plasma concentration profiles in the Large White pig model produced a Cmax of 3.77±1.375µg/mL compared to 10.604±2.846µg/mL for the comparator formulation. The SSM formulation proved superior over the comparator product by providing superiorly controlled enzyme-responsive colonic drug delivery.

The application of a crosslinked pectin-based wafer matrix for gradual buccal drug delivery.

The purpose of this study was to develop crosslinked wafer matrices and establish the influence of the crosslinker type and processing sequence on achieving gradual buccal drug delivery. Three sets of drug-loaded crosslinked pectin wafers were produced employing the model water-soluble antihistamine, diphenhydramine and were compared with noncrosslinked wafers. The formulations were crosslinked with CaCl(2), BaCl(2), or ZnSO(4) pre- or postlyophilization (sets 1 and 2) as well as pre- and postlyophilization (set 3), respectively. The surface morphology, porositometry, molecular vibrational transitions, textural attributes, thermal and in vitro drug release were characterized and supported by in silico molecular mechanics simulations. Results revealed that crosslinked wafers produced smaller pore sizes (107.63 Å) compared with noncrosslinked matrices (180.53 Å) due to molecular crosslinks formed between pectin chains. Drug release performance was dependent on the wafer crosslinking production sequence. Noncrosslinked wafers displayed burst-release with 82% drug released at t(30min) compared with first-order kinetic profiles obtained for prelyophilized crosslinked matrices (50% released at t(30min) followed by steady release). Wafers crosslinked postlyophilization displayed superior control of drug release (40% at t(30min)). Molecular mechanics simulations corroborated with the experimental data and established that Ba(++), having the largest atomic radii (1.35 Å) formed a number of ionic bridges producing wafers of higher porosity (0.048 cm(2)/g) and had more influence on drug release.

Fabrication, modeling and characterization of multi-crosslinked methacrylate copolymeric nanoparticles for oral drug delivery.

Nanotechnology remains the field to explore in the quest to enhance therapeutic efficacies of existing drugs. Fabrication of a methacrylate copolymer-lipid nanoparticulate (MCN) system was explored in this study for oral drug delivery of levodopa. The nanoparticles were fabricated employing multicrosslinking technology and characterized for particle size, zeta potential, morphology, structural modification, drug entrapment efficiency and in vitro drug release. Chemometric Computational (CC) modeling was conducted to deduce the mechanism of nanoparticle synthesis as well as to corroborate the experimental findings. The CC modeling deduced that the nanoparticles synthesis may have followed the mixed triangular formations or the mixed patterns. They were found to be hollow nanocapsules with a size ranging from 152 nm (methacrylate copolymer) to 321 nm (methacrylate copolymer blend) and a zeta potential range of 15.8-43.3 mV. The nanoparticles were directly compressible and it was found that the desired rate of drug release could be achieved by formulating the nanoparticles as a nanosuspension, and then directly compressing them into tablet matrices or incorporating the nanoparticles directly into polymer tablet matrices. However, sustained release of MCNs was achieved only when it was incorporated into a polymer matrix. The experimental results were well corroborated by the CC modeling. The developed technology may be potentially useful for the fabrication of multi-crosslinked polymer blend nanoparticles for oral drug delivery.

In silico theoretical molecular modeling for Alzheimer's disease: the nicotine-curcumin paradigm in neuroprotection and neurotherapy.

The aggregation of the amyloid-ß-peptide (AßP) into well-ordered fibrils has been considered as the key pathological marker of Alzheimer's disease. Molecular attributes related to the specific binding interactions, covalently and non-covalently, of a library of compounds targeting of conformational scaffolds were computed employing static lattice atomistic simulations and array constructions. A combinatorial approach using isobolographic analysis was stochastically modeled employing Artificial Neural Networks and a Design of Experiments approach, namely an orthogonal Face-Centered Central Composite Design for small molecules, such as curcumin and glycosylated nornicotine exhibiting concentration-dependent behavior on modulating AßP aggregation and oligomerization. This work provides a mathematical and in silico approach that constitutes a new frontier in providing neuroscientists with a template for in vitro and in vivo experimentation. In future this could potentially allow neuroscientists to adopt this in silico approach for the development of novel therapeutic interventions in the neuroprotection and neurotherapy of Alzheimer's disease. In addition, the neuroprotective entities identified in this study may also be valuable in this regard.

A timely review of state-of-the-art chronopharmaceuticals synchronized with biological rhythms.

Extensive research into circadian rhythms and their influence on biological systems has given rise to the science of chronobiology and subsequently chronotherapy, the science of delivering drugs in synchrony with biological rhythms. The field of chronotherapeutics paves the way for advances and complexities in current drug delivery technology. The ultimate goal of current chronopharmaceutical research strives to design ideal chronotherapeutic drug delivery systems that respond to such therapeutic needs. Considering the fact that physiological events such as heart rate, blood pressure, plasma concentration of hormones, plasma proteins and enzymes display constancy over time, drug delivery systems with constant release profiles have thus been favored. However, due to circadian rhythms, the conventional paradigm of constant drug delivery may not be what is needed. Instead, precisely timed drug delivery systems are required in order to correlate drug delivery with circadian rhythms to provide maximum therapeutic efficacy for chronotherapeutic diseases when most needed. The aim of this review paper is to outline the concepts in designing chronopharmaceuticals from a clinical viewpoint of major chronotherapeutic diseases such as asthma, allergic rhinitis, cardiovascular disorders, rheumatoid arthritis and cancer as well as relatively minor niche areas of interest such as in glaucoma, diabetes, immunity, pain, gastric ulcers, epilepsy and even HIV/AIDS that would require chronotherapy. In addition this review paper attempts to concisely assimilate and explicate the role of circadian rhythms in these various disease states and provide a focused overview of the current state-of-the-art in designing strategies for chronopharmaceutical formulations employed for treating chronotherapeutic diseases.

Encapsulation of essential oils within a polymeric liposomal formulation for enhancement of antimicrobial efficacy.

Essential oils and their constituents are known to possess antimicrobial activity; however, their inherent volatility is a limiting factor. In order to exploit the antimicrobial efficacy of essential oils, encapsulation within polymeric liposomal systems was undertaken. The liposomes were subsequently polymer-coated in order to further enhance the stability of the formulations. Essential oils distilled from Artemisia afra, Eucalyptus globulus and Melaleuca alternifolia were encapsulated into diastearoyl phosphatidylcholine and diastearoyl phosphatidylethanolamine liposomes employing a reverse phase evaporation methodology. A polyelectrolyte coating was then applied via the layer-by-layer self-deposition technique. A batch of the liposomes was polymer-coated with a 0.15%w/v chitosan solution. Using the minimum inhibitory concentration assay, the liposome-encapsulated, unencapsulated and polymer-coated liposome-encapsulated essential oils were compared in order to observe whether the antimicrobial efficacy was improved with encapsulation and polymer coating. Fractional inhibitory concentrations (FICs) were calculated in order to determine the antimicrobial interactions amongst the lipoid components, polymer coating and essential oils (synergistic, additive, indifferent and antagonistic interactions). With the exception of A. afra, microbial growth was inhibited at lower concentrations for the encapsulated formulations in comparison with the nonencapsulated oils. Synergistic to additive interactions were noted for encapsulated E. globulus (sigmaFIC values 0.25-0.45) and M alternifolia (sigmaFIC values 0.26-0.52) formulations. The addition of the polymer coating did not enhance antimicrobial activity, but owing to their positive effects on membrane stability, its presence is important as a means of extending the shelf life of these formulations. Additionally, the presence of the polymeric coating availed the essential oil at a slower rate. This investigation is a stepping stone towards the promotion of the antimicrobial use of essential oils. The added benefits are that essential oils not only provide effective antimicrobial efficacy, but also promote a "greener" consumerism. Within liposomes, they will enhance dermato-cosmetic properties and increase the marketing image of the final product.

Drug delivery technologies for chronotherapeutic applications.

It has been proven that the body follows a 24-hour cycle called a circadian rhythm. This cycle is coordinated by the suprachiasmatic nucleus and controls nearly all bodily functions including those related to drug delivery. Knowledge of the body's circadian rhythm leads to an improved understanding of diseases and their treatment, known as chronotherapy, such that synchronizing drug application in accordance with the natural rhythm of the body leads to improved disease management and a greater patient therapeutic outcome. Chronotherapeutic diseases include asthma, cardiovascular diseases, glaucoma, rheumatoid arthritis and cancers. In order to treat these diseases numerous chronotherapeutic drug delivery systems have been developed, such that drug is released in the period when it is most needed. This review paper attempts to concisely explicate the role of circadian rhythms in various disease states and furthermore describes the various oral drug delivery technologies that have been employed for the treatment of chronotherapeutic diseases.

Design, biometric simulation and optimization of a nano-enabled scaffold device for enhanced delivery of dopamine to the brain.

This study focused on the design, biometric simulation and optimization of an intracranial nano-enabled scaffold device (NESD) for the site-specific delivery of dopamine (DA) as a strategy to minimize the peripheral side-effects of conventional forms of Parkinson's disease therapy. The NESD was modulated through biometric simulation and computational prototyping to produce a binary crosslinked alginate scaffold embedding stable DA-loaded cellulose acetate phthalate (CAP) nanoparticles optimized in accordance with Box-Behnken statistical designs. The physicomechanical properties of the NESD were characterized and in vitro and in vivo release studies performed. Prototyping predicted a 3D NESD model with enhanced internal micro-architecture. SEM and TEM revealed spherical, uniform and non-aggregated DA-loaded nanoparticles with the presence of CAP (FTIR bands at 1070, 1242 and 2926 cm(-1)). An optimum nanoparticle size of 197 nm (PdI=0.03), a zeta potential of -34.00 mV and a DEE of 63% was obtained. The secondary crosslinker BaCl(2) imparted crystallinity resulting in significant thermal shifts between native CAP (T(g)=160-170 degrees C; T(m)=192 degrees C) and CAP nanoparticles (T(g)=260 degrees C; T(m)=268 degrees C). DA release displayed an initial lag phase of 24 h and peaked after 3 days, maintaining favorable CSF (10 microg/mL) versus systemic concentrations (1-2 microg/mL) over 30 days and above the inherent baseline concentration of DA (1 microg/mL) following implantation in the parenchyma of the frontal lobe of the Sprague-Dawley rat model. The strategy of coupling polymeric scaffold science and nanotechnology enhanced the site-specific delivery of DA from the NESD.

Formulation and evaluation of a salted-out isoniazid-loaded nanosystem.

The purpose of this study was to develop a drug-loaded nanosystem that has the ability to achieve flexible yet rate-controlled release of model drug isoniazid (INH) employing either an aqueous or emulsion-based salting-out approach. Formulation conditions were aimed at reducing the polymeric size with subsequent rate-modulated INH release patterns from the polymeric nanosystem. The emulsion-based salted-out nanosystems had particle sizes ranging from 77-414 nm and a zeta potential of -24 mV. The dispersant dielectric constant was set at 78.5 and a conductivity of 3.99 mS/cm achieved. The reduced nanosystem size of the aqueous-based approach has demonstrated an intrinsically enhanced exposure of methacrylic acid-ethyl acrylate to zinc sulphate which was employed as a crosslinking reagent. This resulted in robustly interconnected polymeric supports in which INH was efficiently embedded and subsequently released. The multi-layer perceptron data obtained showed that the aqueous and emulsion-based salting out approaches had Power (law) (MSE = 0.020) and Linear (MSE = 0.038) relationships, respectively. Drug release from the nanosystems occurred in two phases with an initial burst-release in aqueous-based nanosystems (30-100%) and significantly lower bursts observed in emulsion-based nanosystems (20-65%) within the first 2 h. This was followed by a gradual exponential release phase over the remaining 12 h. The nanosystems developed demonstrated the ability to control the release of INH depending on the formulation approach adopted.