Synergetic contribution of fluorinated azide for high EQE and operational stability of top-illuminated, semitransparent, photomultiplication-type organic photodiodes.

In this study, it is shown that fluorinated azide, employed as a functional additive to photomultiplication-type organic photodiodes (PM-OPDs), can not only enhance the operational stability by freezing the morphology consisting of matrix polymer/localized acceptor but also stabilize the trapped electron states such that the photomultiplication mechanism can be accelerated further, leading to exceptionally high external quantum efficiency (EQE). The consequent semitransparent OPD consisting of molybdenum oxide (MoO3)/Au/MoO3/photoactive layer/polyethyleneimine ethoxylated/indium tin oxide (ITO) rendered a maximum EQE of over 500 000% and 370 000% under bottom and top illumination, respectively. Owing to the remarkably high EQE, high specific detectivity of 5.6 × 1013 Jones and low noise-equivalent power of 5.35 × 10-15 W Hz-0.5 were also demonstrated. Furthermore, the OPD demonstrated stable performance during 20 h of continuous operation and minimal performance degradation even after the damp heat test. To fully visualize the advantages of the proposed high-EQE, top-illuminated, semitransparent OPD with spectral asymmetry between absorption and detection, a reflection-type fingerprint platform consisting of 1 OPD-1 oxide field-effect transistor complementary metal-oxide-semiconductor backplane (300 ppi) is designed and fabricated. The successful recognition of the fingerprint of one of the authors is demonstrated, which indicates the feasibility of the proposed PM-OPD for sensing weak light intensity.

Plum coatings of lemongrass oil-incorporating carnauba wax-based nanoemulsion.

Nanoemulsions containing lemongrass oil (LO) were developed for coating plums and the effects of the nanoemulsion coatings on the microbial safety and physicochemical storage qualities of plums during storage at 4 and 25 °C were investigated. The emulsions used for coating were produced by mixing a carnauba wax-based solution (18%, w/w) with LO at various concentrations (0.5% to 4.0%, w/w) using dynamic high pressure processing at 172 MPa. The coatings were evaluated for their ability to inhibit the growth of Salmonella Typhimurium and Escherichia coli O157:H7 and their ability to preserve various physicochemical qualities of plums. Uniform and continuous coatings on plums, formed with stable emulsions, initially inhibited S. Typhimurium and E. coli O157:H7 by 0.2 to 2.8 and 0.8 to 2.7 log CFU/g, respectively, depending on the concentration of LO and the sequence of coating. The coatings did not significantly alter the flavor, fracturability, or glossiness of the plums. The antimicrobial effects of the coatings against S. Typhimurium and E. coli O157:H7 were demonstrated during storage at 4 and 25 °C. The coatings reduced weight loss and ethylene production by approximately 2 to 3 and 1.4 to 4.0 fold, respectively, and also retarded the changes in lightness and the concentration of phenolic compounds in plums during storage. The firmness of coated plums was generally higher than uncoated plums when stored at 4 °C and plum respiration rates were reduced during storage. Coatings containing nanoemulsions of LO have the potential to inhibit Salmonella and E. coli O157:H7 contamination of plums and may extend plum shelf life.

Band-like transport, high electron mobility and high photoconductivity in all-inorganic nanocrystal arrays.

Flexible, thin-film electronic and optoelectronic devices typically involve a trade-off between performance and fabrication cost. For example, solution-based deposition allows semiconductors to be patterned onto large-area substrates to make solar cells and displays, but the electron mobility in solution-deposited semiconductor layers is much lower than in semiconductors grown at high temperatures from the gas phase. Here, we report band-like electron transport in arrays of colloidal cadmium selenide nanocrystals capped with the molecular metal chalcogenide complex In(2)Se(4)(2-), and measure electron mobilities as high as 16 cm(2) V(-1) s(-1), which is about an order of magnitude higher than in the best solution-processed organic and nanocrystal devices so far. We also use CdSe/CdS core-shell nanoparticles with In(2)Se(4)(2-) ligands to build photodetectors with normalized detectivity D* > 1 × 10(13) Jones (I Jones = 1 cm Hz(1/2) W(-1)), which is a record for II-VI nanocrystals. Our approach does not require high processing temperatures, and can be extended to different nanocrystals and inorganic surface ligands.