Influence of Intravascular Laser Irradiation of Blood (ILIB) on inflammatory cytokines and nitric oxide in vivo: a systematic review.

The use of Intravascular Laser Irradiation of Blood (ILIB) as a treatment or adjunct tool has been used around the world since the 1980s. So that more professionals can deliver benefits to their patients in different areas of health, it is necessary to understand in depth the mechanisms of laser action at the molecular level, for correct indication and success in the treatment. To analyze works that evaluated the influence of ILIB on inflammatory cytokines and nitric oxide (NO) in animals and humans. The literature search was carried out between February and April 2023 in Pubmed, Medline, Web of Science, SciELO, Lilacs database. The risk of bias was assessed using the bias table where the authors performed the analyzes of all articles with the risk of bias domains. The methodology was defined following the PRISMA guidelines (Preferred Systematic Reviews and MetaAnalysis Report). The search retrieved 135 possibly relevant articles. After removing duplicates, according to the eligibility criteria, evaluation of titles and review of abstracts, in the end, 6 articles were included. An increase in anti-inflammatory cytokines, a decrease in pro-inflammatory cytokines and an increase in NO can be observed. The wavelengths used ranged from 660 to 808 nm when using a low intensity laser and when using a VIP light source 480-3400 nm, they also differed in terms of the light emission pattern. ILIB may be a complementary treatment option for patients who have comorbidities that lead to systemic inflammation.

Laser acupuncture to reduce temporomandibular disorder (TMD) symptoms: systematic review and meta-analysis.

The application of low-level laser therapy (LLLT) to acupuncture points may produce effects similar to that of needle stimulation in patients with temporomandibular disorders (TMD). This systematic review was conducted according to the Cochrane Collaboration guidelines and aimed to address clinical questions using the following strategy: Patient/Problem, Intervention, Comparison, and Outcome (PICO). A comprehensive literature search was performed upto April 26, 2023, across nine electronic databases (BVS, PubMed, Scopus, Embase, Web of Science, ScienceDirect, Cochrane Library, Latin American and Caribbean Health Sciences Literature (LILACS), and Google Scholar) supplemented with gray literature. The risk of bias in randomized and nonrandomized clinical trials was assessed using two tools: risk-of-bias (RoB) 2 and Risk Of Bias In Non-randomised Studies-of Interventions (ROBINS-I). Meta-analysis involved the extraction of mean and standard deviation values for spontaneous pain and mouth opening levels. Seven studies were included in this review, all of which used LLLT. The applied wavelengths ranged from 690 to 810 nm without significant variations in light emission patterns. LLLT demonstrated a significant reduction in instantaneous pain levels (standard mean difference [SMD] = 3.85; 95% confidence interval [CI] = 2.09, 5.62; p < 0.003) and an improvement in instantaneous mouth opening ability (mean difference [SMD] = -7.15; 95% CI = -11.73, -2.58; p < 0.002), with low certainty of evidence. LLLT may alleviate symptoms in patients with TMD; however, caution should be exercised when interpreting the results because of protocol variations among studies and the limited number of studies included in the meta-analysis.

Laser acupuncture in the treatment of neuropathies in dentistry: a systematic review.

Laser acupuncture can be used to treat neurosensory alterations and motor disorders caused by dental treatments. This study aimed to review the existing literature on the effects of laser acupuncture on neuropathies in the context of dentistry and to search for treatment modalities in which this technique is used. This systematic review was conducted in accordance with the Cochrane Collaboration guidelines and the PICOS strategy. Randomized clinical trials that evaluated laser acupuncture as a primary intervention for facial neuropathy were included. We searched the database for relevant studies and manually searched the gray literature until April 2022, and finally included four studies. The study was considered eligible if it included patients with paresthesia, facial paralysis, or neuralgia, neuropathies within dentistry, and referred to the application of laser acupuncture as a treatment method. The risk of bias was assessed using the RoB 2 tool. It was observed that the recommended wavelengths ranged from 790 nm to 810 nm, with a frequency of at least two applications per week, and to a greater or lesser degree, all evaluated studies obtained an improvement in sensory or motor recovery of the facial nerves. The use of laser acupuncture presented itself as a viable alternative in dentistry for the treatment of paresthesia and facial paralysis due to its therapeutic potential in neuropathic treatment (CRD42022344339).

Effect of low-level laser stimulation of acupuncture points in pediatric dentistry: a systematic review.

The biomodulatory potential of low-level laser therapy (LLLT) has prompted investigations of different outcomes in health. One line of research is the stimulation of acupuncture points for the relief of different signs and symptoms related to the stomatognathic system. In dentistry, some studies in pediatric dentistry have demonstrated the benefit of LLLT therapies in the management of dental anxiety in children. This systematic review aimed to analyze previous clinical studies on the application of LLLT at acupoints among pediatric dental patients. This systematic review was conducted according to the Cochrane Collaboration guidelines and the population, intervention, comparison, and outcome strategy. A broad literature search up to June 17, 2022, was performed using four electronic databases (PubMed, Scopus, Embase, and Google Scholar). The risk of bias in randomized clinical trials was assessed using the RoB 2 tool. A total of four studies using LLLT for photobiomodulation were included (n = 4). The most common wavelengths used were in the infrared range (variation between 716 nm and 980 nm). There were little variations in the application time (14 s to 1 min) and exposure dose (1 to 5 joules). LLLT acted positively on different acupuncture points. LLLT provided various benefits and optimized dental practice by reducing the gag reflex during radiography and impression taking, preanesthetic pain, and symptoms of sleep bruxism in the pediatric dental population. Only one of the evaluated studies had a high risk of bias. The LLLT at acupuncture points is associated with positive results on sleep bruxism, preanesthetic pain, and gag reflex in pediatric dentistry. Future research studies should prioritize standardization of the study design and the methods of analysis.

Longitudinal analyses of composite resin restoration on erosive lesions: effect of dentin treatment with a chitosan nanoformulation containing green tea

Aim To evaluate the influence of the biomodification of erosive lesions with a chitosan nanoformulation containing green tea (NanoCsQ) on the clinical performance of a composite resin. Methods The study was performed in a split-mouth, randomized and double-blinded model with 20 patients with 40 erosive lesions. The patient's teeth were randomized into two groups (n=20) according to the surface treatment: 1) Without biomodification (control), and 2) Biomodification with NanoCsQ solution (experimental). The lesions were restored with adhesive (Tetric N-bond, Ivoclar) and composite resin (IPS Empress Direct, Ivoclar). The restorations were polished and 7 days (baseline), 6 months, and 12 months later were evaluated according to the United States Public Health Service (USPHS) modified criteria, using clinical exam and photographics. Data were analyzed by Friedman's and Wilcoxon signed-rank tests. Results No significant differences were found between the control and experimental groups (p=0.423), and also among the follow-up periods (baseline, six months, and 12 months) (p=0.50). Regarding the retention criteria, 90% of the restoration had an alpha score in the control group. Only 10% of the restorations without biomodification (control) had a score charlie at the 12-month follow-up. None of the patients reported post-operatory sensitivity. Conclusion The NanoCsQ solution did not negatively affect the performance of the composite resin restorations after 12 months.

Effects of the green tea catechin epigallocatechin-3-gallate on Streptococcus mutans planktonic cultures and biofilms: systematic literature review of in vitro studies.

This study aimed at performing a systematic review of the literature on the effects of epigallocatechin-3-gallate (EGCG) on Streptococcus mutans planktonic cultures and biofilms. The selected references demonstrated that EGCG suppresses S. mutans acid production by inhibiting the activity of enzymes such as lactate dehydrogenase and FIF0-ATPase. Regarding virulence factors, one study reported a reduction in soluble and insoluble polysaccharide synthesis, another demonstrated that EGCG inhibited GTase activity, and another showed effects of EGCG on the expression of gtf B, C, and D. The effects of EGCG on S. mutans biofilms were reported only by 2 of the selected studies. Moreover, high variability in effective concentrations and microbial assessment methods were observed. The literature suggests that EGCG has effects against S. mutans planktonic cells viability and virulence factors. However, the literature lacks studies with appropriate biofilm models to evaluate the precise effectiveness of EGCG against S. mutans biofilms.

Photobiomodulation impacts the levels of inflammatory mediators during orthodontic tooth movement? A systematic review with meta-analysis.

During orthodontic tooth movement (OTM), there is the release of cytokines in the gingival crevicular fluid (GCF) that are supposed to participate in the bone remodeling. This systematic review aimed at assessing the effects of photobiomodulation (PBM) on the levels of these cytokines during OTM. This systematic review according to Cochrane Collaboration guidelines aimed to answer the clinical question following the PICOS strategy. The broad search in the literature was performed before 05 April, 2021 in six electronic databases (Pubmed, Web of Science, Scopus, Embase, Cochrane, Biblioteca Virtual de Saúde) and supplemented by the grey literature. The risk of bias of randomized and non-randomized clinical trials was evaluated by two tools: RoB 2 and ROBINS-I. Mean and standard deviation of cytokine levels was extracted to meta-analysis, and the GRADE system was applied to assess the quality of the evidence. Nine studies were included in this review. Low-level laser therapy (LLLT) was the photobiomodulation type used in most of the studies (n = 8). The wavelengths used varied from 618 to 980 nm and also differed concerning the light emission pattern. LLLT increased the levels of IL-1ß, IL-8, OPN, and PGE2, but not TNF-α1, TGF-ß1. The levels of IL6, RANKL, and OPG presented conflicting results. LLLT was statistically associated with an increase of IL-1ß levels (standard mean difference [SMD] = 1.99; 95% confidence interval = 0.66 to 3.33; p < 0.001) with low certainty of evidence. LLLT may increase the levels of IL-1ß and other cytokines; however, the results should be interpreted with caution due to protocol variations between studies, and the few studies added in the meta-analysis.

Effect of green tea-loaded chitosan nanoparticles on leathery dentin microhardness.

The purpose of this study was to assess the effect of a chitosan-based nanoformulation containing green tea on leathery (remaining) dentin subsurface microhardness. Size distribution, polydispersity index (PDI) and zeta potential (mV) of nanoformulations were previously determined by dynamic light scattering (DLS). Human dentin specimens were exposed to Streptococcus mutans for 14 d. Soft dentin were selectively removed by Er:YAG laser (n = 30) or bur (n = 30). Remaining dentin was biomodified with chitosan nanoparticles (Nchi, n = 10) or green tea-loaded chitosan nanoparticles (Gt + Nchi, n = 10) for 1 min. Control group (n = 10) did not receive any treatment. Subsurface microhardness (Knoop) was evaluated in hard (sound) and soft dentin, and then, in leathery dentin and after its biomodification, at depths of 30, 60 and 90 µm from the surface. Nchi reached an average size of ≤ 300 nm, PDI varied between 0.311 and 0.422, and zeta potential around + 30 mV. Gt + Nchi reached an average size of ≤ 350 nm, PDI < 0.45, and zeta potential around + 40 mV. Soft dentin showed significantly reduced microhardness at all depths (p > 0.05). The subsurface microhardness was independent of choice of excavation method (p > 0.05). At 30 µm from the surface, Gt + Nchi increased the leathery dentin microhardness compared to untreated group (p < 0.05). Nchi promoted intermediate values (p > 0.05). Both nanoformulations showed an average size less than 350 nm with nanoparticles of different sizes and stability along the 90-day period evaluated. Subsurface microhardness of bur-treated and laser-irradiated dentin was similar. At 30 µm, the biomodification with Gt + Nchi improved the microhardness of leathery dentin, independently of caries excavation method used.

Effect of curcumin-mediated photodynamic therapy on Streptococcus mutans and Candida albicans: A systematic review of in vitro studies.

BACKGROUND: There is still no systematized evidence in the literature regarding the combination of curcumin to improve the effects of antimicrobial photodynamic therapy (aPDT) on complex oral biofilms. Therefore, the objective of this review was to systematically assess the antimicrobial effect of curcumin-mediated aPDT on the vitality of biofilms of microorganisms Streptococcus mutans and Candida albicans. METHODS: The addressed focused question was: "What are the effects of curcumin-mediated antimicrobial therapy on the biofilm viability of Streptococcus mutans and Candida albicans in vitro models?" A literature search was conducted in the electronic databases Pubmed, Web of Science, Scopus, Cochrane Library and Bireme up to April 2019. In vitro studies evaluating the effect of curcumin-mediated antimicrobial photodynamic therapy on S. mutans and C. albicans biofilms were included. RESULTS: From 95 citations, 11 full-text articles were screened and 6 studies were included in this review. Because of the heterogeneity observed in the studies selected, meta-analysis was not possible. CONCLUSIONS: The in vitro studies indicate the potential use of curcumin-mediated aPDT to inactivate microorganisms; Streptococcus mutans and Candida albicans. This survey should be viewed as a starting point for further examinations using standardized parameters to enhance outcomes.

Effect of grape seed extract on bond strength of restorative material to bleached enamel

Objective: The aim of this study was to evaluate the effect of different concentrations of a natural antioxidant (grape seed extract) on the bond strength of the restorative material to the bleached enamel. Methods: Forty fragments of healthy bovine incisors were randomly divided into four groups (n = 10): Group I: no bleaching; Group II: Bleaching with 35% hydrogen peroxide (HP) and without post-treatment; Group III: Bleaching with 35% HP + 5% grape seed extract; and Group IV: Bleaching with 35% HP + 10% grape seed extract. The bond strength at the adhesive interface was evaluated using the shear test (MPa). The data were analyzed by the analysis of variance (ANOVA) and Tukey test ( =0.05%). The fracture types were also analyzed and classified into: adhesive, cohesive or mixed. Results: Only Group III (bleached + 5% grape seed extract) had a significant increase (p<0.001) in bond strength values when compared to Group II bleached, without post- reatment). All groups showed a predominance of the adhesive type of fracture. Conclusion: It could be concluded that tooth bleaching decreases the bond strength to bleached enamel and 5% grape seed extract applied after dental bleaching improves the bond strength between the restorative material and the bleached enamel.

Objetivo: Este trabalho teve por objetivo avaliar in vitro o efeito de um antioxidante natural (extrato de semente de uva) em diferentes concentrações, na resistência de união do material restaurador ao esmalte clareado. Métodos: Quarenta fragmentos de incisivos bovinos hígidos, foram divididos aleatoriamente em quatro grupos (n=10): Grupo I: sem clareamento; Grupo II: clareado com peróxido de hidrogênio 35% (PH) e sem pós-tratamento; GIII: clareado PH 35% + extrato de semente de uva 5%; e Grupo IV: clareado com PH 35% + extrato de semente de uva 10%. A resistência de união da interface esmalte/material restaurador foi avaliada por meio do teste de cisalhamento (MPa). Os dados foram analisados pela análise de variância (ANOVA) e testes de Tukey ( =0,05%). Os tipos de fratura também foram analisados e classificados em: adesiva, coesiva ou mista. Resultados: Apenas o Grupo III (clareado + extrato de semente de uva 5%) apresentou aumento estatisticamente significante (p<0,001). dos valores de resistência de união comparado ao Grupo II (clareado e sem pós-tratamento). Todos os grupos mostraram um predomínio do tipo de fratura adesiva. Conclusão: O clareamento dental diminui significativamente a força de adesão ao esmalte dental clareado, e o extrato de semente de uva 5% aplicado após o clareamento dental melhora a resistência de união entre o material restaurador e o esmalte clareado.

Influence of pre-irradiation time employed in antimicrobial photodynamic therapy with diode laser.

The aim of the present study was to evaluate, in vitro, the effect of different pre-irradiation times of the photosensitizer in photodynamic therapy in biofilms formed by Streptococcus mutans and Candida albicans, through the evaluation of the microbial load. The factors under study were as follows: times of pre-irradiation of the photosensitizer in three levels (1, 2, or 5 min). For the control of the cariogenic dental biofilm with antimicrobial photodynamic therapy (aPDT), methylene blue (0.01%) was used in association with the diode laser (InGaAlP) with a wavelength of 660 nm. Chlorhexidine digluconate (0.12% CHX) and saline were used as positive and negative controls, respectively. The study design was carried out in complete and randomized blocks. The sample consisted of 15 S. mutans biofilms cultures, randomly divided into five groups and 15 C. albicans cultures, also divided into five groups. The experiment was performed in triplicate (n = 3) and the response variables were obtained through quantitative analysis of bacterial viability, expressed in colony-forming units (CFU) per square millimeter of the specimen area. The data were analyzed with the aid of the ANOVA one-way test and Tukey's post-test. All analyses were performed using the Graph Pad Prism 4.0 program, with a significance level of 5%. For the S. mutans group, only the saline solution presented a statistically significant difference when compared to the other treatments (p < 0.05), that is, the treatment with aPDT, irrespective of the irradiation time applied, was similar to the treatment with CHX and both were more effective in reducing cariogenic biofilm compared to saline. For the group of C. albicans, there was no statistical difference between the groups (p > 0.05). Therefore, it can be concluded that the treatment with aPDT reduced the number of CFUs of S. mutans in a similar way to CHX, independently of the pre-irradiation time applied. No effect of this therapy or of the different pre-irradiation times on the C. albicans biofilm could be observed. In this way, the pre-irradiation time of 1 min can be used to reduce the microbial load of S. mutans.

Clinical evaluation of composite restorations in Er:YAG laser-prepared cavities re-wetting with chlorhexidine.

OBJECTIVES: The objective of this study was to evaluate longitudinally the composite restorations, performed in cavities prepared by Er:YAG or conventional bur, and dentin re-wetting with water or chlorhexidine. MATERIALS AND METHODS: Twenty individuals with four active caries with cavitation reaching the dentin located on the occlusal surface of molars counterparts are selected. The teeth of each individual were randomly assigned into four groups: (I) Er:YAG laser (260 mJ/4 Hz) re-wetting with chlorhexidine, (II) Er:YAG laser (260 mJ/4 Hz) re-wetting with deionized water, (III) conventional method re-wetting with chlorhexidine, and (IV) conventional method re-wetting with deionized water. The teeth were isolated, prepared cavities, phosphoric acid etching, and re-wetting according to previously assigned method. Restoration was performed employing the Single Bond 2 and Z350XT resin. Clinical follow-up was held after the polishing of the restoration (baseline) and 6 and 12 months of the making of the restoration using the modified USPHS criteria. The restorations were qualitatively analyzed by means of photographs. In the evaluation period, replicas of the restorations were analyzed by SEM. Data were analyzed by statistics using chi-square test (p < 0.05). RESULTS: After 12 months of clinical evaluation, groups prepared with laser and re-wetting with chlorhexidine and water showed the lowest marginal staining value. There was no statistical difference between the groups for other factors. SEM analysis revealed that a non-expressive amount of restorations showed gaps and irregularities of tooth-restoration interface after 6 and 12 months compared to the baseline. CONCLUSION: The restorations performed in laser-prepared cavities, regardless of the re-wetting, presented the best clinical performance over the evaluated period. CLINICAL RELEVANCE: Laser-prepared teeth, regardless of re-wetting, showed greater resistance to marginal discoloration.

Sub ablative Er: YAG laser irradiation on surface roughness of eroded dental enamel.

OBJECTIVE: This study evaluated the effects of Er:YAG laser irradiation applied at varying pulse repetition rate on the surface roughness of eroded enamel. METHODS: Bovine enamel slabs (n = 10) were embedded in polyester resin, ground, and polished. To erosive challenges, specimens were immersed two times per day in 20mL of concentrated orange juice (pH = 3.84) under agitation, during a two-day period. Specimens were randomly assigned to irradiation with the Er:YAG laser (focused mode, pulse energy of 60 mJ and energy density of 3.79 J/cm(2) ) operating at 1, 2, 3, or 4 Hz. The control group was left nonirradiated. Surface roughness measurements were recorded post erosion-like formation and further erosive episodes by a profilometer and observed through atomic force microscopy (AFM). RESULTS: Analysis of variance revealed that the control group showed the lowest surface roughness, while laser-irradiated substrates did not differ from each other following post erosion-like lesion formation. According to analysis of covariance, at further erosive episodes, the control group demonstrated lower surface roughness (P > 0.05), than any of the irradiated groups (P < 0.05). CONCLUSIONS: The pulse repetition rate of the Er:YAG laser did not affect roughness of dental enamel eroded. The AFM images showed that the specimens irradiated by the Er:YAG laser at 1 Hz presented a less rough surface than those irradiated at 2, 3, and 4 Hz.

Effect of beverages on bovine dental enamel subjected to erosive challenge with hydrochloric acid.

This study evaluated by an in vitro model the effect of beverages on dental enamel previously subjected to erosive challenge with hydrochloric acid. The factor under study was the type of beverage, in five levels: Sprite® Zero Low-calorie Soda Lime (positive control), Parmalat® ultra high temperature (UHT) milk, Ades® Original soymilk, Leão® Ice Tea Zero ready-to-drink low-calorie peach-flavored black teaand Prata® natural mineral water (negative control). Seventy-five bovine enamel specimens were distributed among the five types of beverages (n=15), according to a randomized complete block design. For the formation of erosive wear lesions, the specimens were immersed in 10 mL aqueous solution of hydrochloric acid 0.01 M for 2 min. Subsequently, the specimens were immersed in 20 mL of the beverages for 1 min, twice daily for 2 days at room temperature. In between, the specimens were kept in 20 mL of artificial saliva at 37ºC. The response variable was the quantitative enamel microhardness. ANOVA and Tukey's test showed highly significant differences (p<0.00001) in the enamel exposed to hydrochloric acid and beverages. The soft drink caused a significantly higher decrease in microhardness compared with the other beverages. The black tea caused a significantly higher reduction in microhardness than the mineral water, UHT milk and soymilk, but lower than the soft drink. Among the analyzed beverages, the soft drink and the black tea caused the most deleterious effects on dental enamel microhardness.

Fluoride plus CO2 laser against the progression of caries in root dentin.

PURPOSE: To evaluate the effect of a 1.23% acidulated phosphate fluoride (APF) gel combined with CO2 laser in protecting carious root dentin against further cariogenic challenges. METHODS: After a 7-day lead-in period, 12 volunteers wore an intraoral palatal device containing four carious root dentin slabs, treated with APF and APF+CO2 or placebo and placebo+CO2. After a 14-day wash-out period, volunteers were crossed-over to the other treatment arm. During both intraoral phases, specimens were submitted to cariogenic challenges and then evaluated for cross-sectional Knoop microhardness. RESULTS: Two-way ANOVA demonstrated that there was significant effect for both main factors: CO2 laser irradiation (P < 0.0001) and gel treatment (P < 0.0001), and that there was no interaction between them (P = 0.4706). Protection of carious root dentin against further cariogenic challenges may be provided by APF fluoride gel and CO2 laser, but no additive benefit was found by combining such strategies.

Effect of beverages on bovine dental enamel subjected to erosive challenge with hydrochloric acid

This study evaluated by an in vitro model the effect of beverages on dental enamel previously subjected to erosive challenge with hydrochloric acid. The factor under study was the type of beverage, in five levels: Sprite® Zero Low-calorie Soda Lime (positive control), Parmalat® ultra high temperature (UHT) milk, Ades® Original soymilk, Leão® Ice Tea Zero ready-to-drink low-calorie peach-flavored black teaand Prata® natural mineral water (negative control). Seventy-five bovine enamel specimens were distributed among the five types of beverages (n=15), according to a randomized complete block design. For the formation of erosive wear lesions, the specimens were immersed in 10 mL aqueous solution of hydrochloric acid 0.01 M for 2 min. Subsequently, the specimens were immersed in 20 mL of the beverages for 1 min, twice daily for 2 days at room temperature. In between, the specimens were kept in 20 mL of artificial saliva at 37ºC. The response variable was the quantitative enamel microhardness. ANOVA and Tukey's test showed highly significant differences (p<0.00001) in the enamel exposed to hydrochloric acid and beverages. The soft drink caused a significantly higher decrease in microhardness compared with the other beverages. The black tea caused a significantly higher reduction in microhardness than the mineral water, UHT milk and soymilk, but lower than the soft drink. Among the analyzed beverages, the soft drink and the black tea caused the most deleterious effects on dental enamel microhardness.

Este estudo avaliou através de um modelo in vitro o efeito de bebidas no esmalte dental previamente submetido a desafio erosivo com ácido clorídrico. O fator em estudo foi o tipo de bebida, em cinco níveis: Sprite Zero (Coca-Cola® Brasil) controle positivo, leite integral Ultra High Temperature (Parmalat®), extrato de soja integral (Ades® Original), chá preto com baixo teor calórico sabor pêssego (Leão Ice Tea Zero Coca-Cola® Brasil) e água mineral Prata® (controle negativo). Setenta e cinco espécimes de esmalte bovino foram distribuídos entre os cinco tipos de bebidas (n = 15), de acordo com delineamento em blocos completos e casualizados. Para a formação das lesões de desgaste erosivo, os espécimes foram imersos durante 2 min em 10 mL de solução aquosa de ácido clorídrico 0,01 M. Subsequentemente foram imersos em 20 mL das bebidas por 1 min, duas vezes ao dia durante 2 dias, em temperatura ambiente. Nos intervalos entre as imersões os espécimes permaneceram em saliva artificial a 37ºC. A variável de resposta quantitativa foi microdureza superficial do esmalte. ANOVA e teste de Tukey demonstraram diferenças altamente significativas (p <0,00001) no esmalte exposto ao ácido clorídrico e às bebidas. O refrigerante provocou diminuição da microdureza superficial significativamente maior do que as demais bebidas. O chá preto provocou diminuição da microdureza significativamente maior que a água mineral, o leite UHT e o extrato de soja, porém menor que o refrigerante.Entre as bebidas analisadas, refrigerante e chá preto demonstraram efeitos mais deletérios sobre a microdureza do esmalte dental.

Microleakage in conservative cavities varying the preparation method and surface treatment.

OBJECTIVE: To assess microleakage in conservative class V cavities prepared with aluminum-oxide air abrasion or turbine and restored with self-etching or etch-and-rinse adhesive systems. MATERIALS AND METHODS: Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine) and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37% phosphoric acid; groups II/IV - self-priming etchant (Tyrian-SPE). Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50% silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey's test (α=0.05). RESULTS: Marginal seal provided by air abrasion was similar to high-speed handpiece, except for group I. There was SIGNIFICANT difference between enamel and dentin/cementum margins for to group I and II: air abrasion. The etch-and-rinse adhesive system promoted a better marginal seal. At enamel and dentin/cementum margins, the highest microleakage values were found in cavities treated with the self-etching adhesive system. At dentin/cementum margins, high-speed handpiece preparations associated with etch-and-rinse system provided the least dye penetration. CONCLUSION: Marginal seal of cavities prepared with aluminum-oxide air abrasion was different from that of conventionally prepared cavities, and the etch-and-rinse system promoted higher marginal seal at both enamel and dentin margins.

Microleakage in conservative cavities varying the preparation method and surface treatment

OBJECTIVE: To assess microleakage in conservative class V cavities prepared with aluminum-oxide air abrasion or turbine and restored with self-etching or etch-and-rinse adhesive systems. Materials and Methods: Forty premolars were randomly assigned to 4 groups (I and II: air abrasion; III and IV: turbine) and class V cavities were prepared on the buccal surfaces. Conditioning approaches were: groups I/III - 37 percent phosphoric acid; groups II/IV - self-priming etchant (Tyrian-SPE). Cavities were restored with One Step Plus/Filtek Z250. After finishing, specimens were thermocycled, immersed in 50 percent silver nitrate, and serially sectioned. Microleakage at the occlusal and cervical interfaces was measured in mm and calculated by a software. Data were subjected to ANOVA and Tukey's test (α=0.05). RESULTS: Marginal seal provided by air abrasion was similar to high-speed handpiece, except for group I. There was SIGNIFICANT difference between enamel and dentin/cementum margins for to group I and II: air abrasion. The etch-and-rinse adhesive system promoted a better marginal seal. At enamel and dentin/cementum margins, the highest microleakage values were found in cavities treated with the self-etching adhesive system. At dentin/cementum margins, high-speed handpiece preparations associated with etch-and-rinse system provided the least dye penetration. CONCLUSION: Marginal seal of cavities prepared with aluminum-oxide air abrasion was different from that of conventionally prepared cavities, and the etch-and-rinse system promoted higher marginal seal at both enamel and dentin margins.

Effect of Er:YAG laser parameters on ablation capacity and morphology of primary enamel.

OBJECTIVE: The purpose of this study was to evaluate the ablation capacity of different energies and pulse repetition rates of Er:YAG laser energy on primary molar enamel, by assessing mass loss and by analyzing the surface morphology with scanning electron microscopy. BACKGROUND DATA: Previous studies have demonstrated the capacity of the Er:YAG laser to ablate enamel substrate. METHODS: Forty-two sound primary molars were bisected in a mesiodistal direction. The enamel surfaces were flattened and their initial mass (in milligrams) was obtained. An area of 4 mm(2) was delimited. The specimens were randomly assigned to 12 groups according to the combination of energy (160, 200, 250, and 300 mJ) and pulse repetition rate (2, 3, and 4 Hz). Er:YAG laser irradiation was performed on each specimen for 20 sec. After irradiation, the final mass was obtained and specimens were prepared for examination with scanning electron microscopy. The data obtained by subtracting the final mass from the initial mass were statistically analyzed using ANOVA and the Tukey test (p < 0.05). RESULTS: The pulse repetition rate of 4 Hz provided greater mass loss, different from that seen with 2 Hz, and similar to that seen with 3 Hz. The energy level of 300 mJ resulted in greater mass loss, similar to that seen with 200 and 250 mJ. Scanning electron photomicrographs showed that there was non-selective enamel removal, with fused and cracked areas in all specimens. CONCLUSION: The parameters of 200 mJ and 2 Hz produced a good ablation rate with fewer surface alterations in primary molar enamel.

Water flow on erbium:yttrium-aluminum-garnet laser irradiation: effects on dental tissues.

Since lasers were introduced in dentistry, there has been considerable advancement in technology. Several wavelengths have been investigated as substitutes for high-speed air turbine. Owing to its high absorbability in water and hydroxyapatite, the erbium:yttrium-aluminum-garnet (Er:YAG) laser has been of great interest among dental practitioners and scientists. In spite of its great potential for hard tissue ablation, Er:YAG laser effectiveness and safety is directly related to an adequate setting of the working patterns. It is assumed that the ablation rate is influenced by certain conditions, such as water content of the target tissue, and laser parameters. It has been shown that Er:YAG irradiation with water coolant attenuates temperature rise and, hence, minimizes the risk of thermally induced pulp injury. It also increases ablation efficiency and enhances adhesion to the lased dental tissue. The aim of this review was to obtain insights into the ablation process and to discuss the effects of water flow on dental tissue ablation using Er:YAG laser.