Ultrasound Assisted Coextraction of Cornicabra Olives and Thyme to Obtain Flavored Olive Oils.

Flavoring olive oils is a new trend in consumer preferences, and different enrichment techniques can be used. Coextraction of olives with a flavoring agent is an option for obtaining a flavored product without the need for further operations. Moreover, ultrasound (US) assisted extraction is an emergent technology able to increase extractability. Combining US and coextraction, it is possible to obtain new products using different types of olives (e.g., cultivar and ripening stage), ingredient(s) with the greatest flavoring and/or bioactive potential, as well as extraction conditions. In the present study, mastic thyme (Thymus mastichina L.) (TM) and lemon thyme (Thymus x citriodorus) (TC) were used for flavoring Cornicabra oils by coextraction. The coextraction trials were performed by (i) thyme addition to the olives during crushing or malaxation and (ii) US application before malaxation. Several parameters were evaluated in the oil: quality criteria parameters, total phenols, fatty acid composition, chlorophyll pigments, phenolic profile and oxidative stability. US application did not change the phenolic profile of Cornicabra olive oils, while the enrichment of olive oils with phenolic compounds or pigments by coextraction was very dependent on the thyme used. TM enrichment showed an improvement of several new phenolic compounds in the oils, while with TC, fewer new phenols were observed. In turn, in the trials with TC, the extraction of chlorophyll pigments was higher, particularly in crushing coprocessing. Moreover, the oils obtained with US and TM added in the mill or in the malaxator showed lower phenol decrease (59%) than oils flavored with TC (76% decrease) or Cornicabra virgin olive oil (80% decrease) over an 8-month storage period. Multivariate data analysis, considering quality parameters, pigments and phenolic contents, showed that flavored oils were mainly grouped by age.

Continuous Production of Dietetic Structured Lipids Using Crude Acidic Olive Pomace Oils.

Crude olive pomace oil (OPO) is a by-product of olive oil extraction. In this study, low-calorie structured triacylglycerols (TAGs) were produced by acidolysis of crude OPO with medium-chain fatty acids (caprylic, C8:0; capric, C10:0) or interesterification with their ethyl ester forms (C8EE, C10EE). These new TAGs present long-chain fatty acids (L) at position sn-2 and medium-chain fatty acids (M) at positions sn-1,3 (MLM). Crude OPO exhibited a high acidity (12.05-28.75% free fatty acids), and high contents of chlorophylls and oxidation products. Reactions were carried out continuously in a packed-bed bioreactor for 70 h, using sn-1,3 regioselective commercial immobilized lipases (Thermomyces lanuginosus lipase, Lipozyme TL IM; and Rhizomucor miehei lipase, Lipozyme RM IM), in solvent-free media at 40 °C. Lipozyme RM IM presented a higher affinity for C10:0 and C10EE. Lipozyme TL IM preferred C10:0 over C8:0 but C8EE over C10EE. Both biocatalysts showed a high activity and operational stability and were not affected by OPO acidity. The New TAG yields ranged 30-60 and the specific productivity ranged 0.96-1.87 g NewTAG/h.g biocatalyst. Lipozyme RM IM cost is more than seven-fold the Lipozyme TL IM cost. Therefore, using Lipozyme TL IM and crude acidic OPO in a continuous bioreactor will contribute to process sustainability for structured lipid production by lowering the cost of the biocatalyst and avoiding oil refining.

Enrichment of Sunflower Oil with Ultrasound-Assisted Extracted Bioactive Compounds from Crithmum maritimum L.

Crithmum maritimum L., or sea fennel, is an edible halophyte plant, rich in phenolic compounds with antioxidant and antimicrobial activities, that naturally grows in Mediterranean coasts. This study aims to incorporate bioactive compounds extracted from lyophilized Crithmum maritimum to sunflower oil assisted by ultrasounds (UAE), to improve its biological value and oxidative stability. UAE conditions were optimized as a function of time (5-20 min) and lyophilized plant concentration (5-20% m/v). The experiments were dictated by a central composite rotatable matrix. Oxidation products were not influenced by UAE conditions. Acidity, chlorophyll, and carotenoid contents were affected by both factors, while total phenols, flavonoids, and antioxidant activity (FRAP method) only increased with plant concentration. Response surfaces were fitted to these experimental results. Flavonoids were highly related with oil antioxidant activity. No sensory defects were detected in supplemented oil (12.5% m/v plant/5 min UAE). The oxidative stability of this oil was evaluated at 60 °C/12 days. Chlorophylls, phenols, radical scavenging (DPPH), and antioxidant activities decreased over time but were always higher than the values in non-supplemented oil (8.6 and 7-fold with FRAP and DPPH, respectively). C. maritimum presented high amounts of bioactive compounds with antioxidant activity, adequate for sunflower oil supplementation by UAE.

Integrated bioprocess for structured lipids, emulsifiers and biodiesel production using crude acidic olive pomace oils.

Olive pomace oil (OPO), a by-product of olive oil industry, is directly consumed after refining. The novelty of this study consists of the direct use of crude high acidic OPO (3.4-20% acidity) to produce added-value compounds, using sn-1,3-regioselective lipases: (i) low-calorie dietetic structured lipids (SL) containing caprylic (C8:0) or capric (C10:0) acids by acidolysis or interesterification with their ethyl esters, (ii) fatty acid methyl esters (FAME) for biodiesel, and (iii) sn-2 monoacylglycerols (emulsifiers), as by-product of FAME production by methanolysis. Immobilized Rhizomucor miehei lipase showed similar activity in acidolysis and interesterification for SL production (yields: 47.8-53.4%, 7 h, 50℃) and was not affected by OPO acidity. Batch operational stability decreased with OPO acidity, but it was at least three-fold in interesterification that in acidolysis. Complete conversion of OPO into FAME and sn-2 monoacylglycerols was observed after 3 h-transesterification (glycerol stepwise addition) and lipase deactivation was negligeable after 11 cycles.

Optimization of Ultrasound-Assisted Extraction of Bioactive Compounds from Pelvetia canaliculata to Sunflower Oil.

In this study, Pelvetia canaliculata L. macroalga, collected from the Atlantic Portuguese coast, was used as a source of bioactive compounds, mostly antioxidants, to incorporate them in sunflower oil with the aim of increasing its biological value and oxidative stability. The lyophilized alga was added to the oil, and ultrasound-assisted extraction (UAE) was performed. Algae concentration and UAE time varied following a central composite rotatable design (CCRD) to optimize extraction conditions. The following parameters were analyzed in the oils: oxidation products, acidity, color, chlorophyll pigments, carotenoids, flavonoids, total phenolic content, antioxidant activity by DPPH (2,2-diphenyl-1-picrylhydrazyl) and FRAP (ferric reducing antioxidant power) assays, and sensory analysis. Extraction conditions did not affect the acidity and the amount of oxidation products in the oil. Chlorophylls and carotenoid contents increased with algae concentration, while flavonoid extraction did not depend on algae content or UAE time. Total phenolics in the oil were highly related only to FRAP antioxidant activity. Storage experiments of supplemented oil (12.5% algae; 20 min UAE) were carried out under accelerated oxidation conditions at 60 °C/12 days. Antioxidant activity (FRAP) of supplemented oil was 6-fold higher than the value of non-supplemented oil. Final samples retained 40% of their initial antioxidant activity. The presence of algae extracts contributed to the increased oxidative stability of sunflower oil.

Production of low-calorie structured lipids from spent coffee grounds or olive pomace crude oils catalyzed by immobilized lipase in magnetic nanoparticles.

In this study, crude oils extracted from spent coffee grounds (SCG) and olive pomace (OP) were used as raw-material to synthesize low-calorie triacylglycerols, either by acidolysis with capric acid, or by interesterification with ethyl caprate, in solvent-free media, catalyzed by sn-1,3 regioselective lipases. The Rhizopus oryzae lipase (ROL) was immobilized in magnetite nanoparticles (MNP-ROL) and tested as novel biocatalyst. MNP-ROL performance was compared with that of the commercial immobilized Thermomyces lanuginosus lipase (Lipozyme TL IM). For both oils, Lipozyme TL IM preferred interesterification over acidolysis. MNP-ROL catalyzed reactions were faster and acidolysis was preferred with yields of c.a. 50% new triacylglycerols after 3 h acidolysis of OP or SCG oils. MNP-ROL was very stable following the Sadana deactivation model with half-lives of 163 h and 220 h when reused in batch acidolysis and interesterification of OP oil, respectively.

Influence of enzymes and technology on virgin olive oil composition.

This work aims at presenting the state-of-the-art about the influence of the activity of olive endogenous enzymes, as well as of the application of adjuvants in olive oil technology, discussing their influence on the composition of virgin olive oil, especially in phenols and volatile compounds.

Biodiesel production from crude jatropha oil catalyzed by immobilized lipase/acyltransferase from Candida parapsilosis in aqueous medium.

The lipase/acyltransferase from Candida parapsilosis (CpLIP2) immobilized on two synthetic resins (Accurel MP 1000 and Lewatit VP OC 1600) was used as catalyst for the production of biodiesel (fatty acid methyl esters, FAME) by transesterification of jatropha oil with methanol, in a lipid/aqueous system. The oil was dispersed in a buffer solution (pH 6.5) containing methanol in excess (2M in the biphasic system; molar ratio methanol/acyl chains 2:1). Transesterification was carried out at 30°C, under magnetic stirring, using 10% (w/w) of immobilized enzyme in relation to oil. The maximum FAME yields were attained after 8h reaction time: 80.5% and 93.8%, when CpLIP2 immobilized on Accurel MP 1000 or on Lewatit VP OC 1600 were used, respectively. CpLIP2 on both Accurel MP 1000 and Lewatit VP OC 1600 showed high operational stability along 5 consecutive 8h batches.

Phenolic compounds of 'Galega Vulgar' and 'Cobrançosa' olive oils along early ripening stages.

In this study, the lipophilic and hydrophilic phenol composition of virgin olive oils (VOO) obtained from olives from two of the most important Portuguese cultivars ('Galega Vulgar' and 'Cobrançosa'), harvested at different ripening stages and under two irrigation schemes (rain fed and irrigated), was evaluated. Phenolic alcohols (hydroxytyrosol and tyrosol), phenolic acids and derivatives and flavonoids (luteolin and apigenin), as well as tocopherols were quantified. Lipophilic (>300mgkg(-1)) and hydrophilic phenols (>600mgkg(-1)) were present in high contents in both VOO, for early ripening stages. Gamma-tocopherol content is higher in 'Galega Vulgar' VOO. Total phenols showed a decrease between ripening index 2.5 and 3.5. The dialdehydic form of elenolic acid linked to hydroxytyrosol (3,4-DHPEA-EDA), also known as oleacein, was the major phenolic compound identified in both oils. The concentration of free hydroxytyrosol and tyrosol in both VOO is very low while their esterified derivatives, like 3,4-DHPEA-EDA and p-HPEA-EDA, are much more abundant.

The potential use of lipases in the production of fatty acid derivatives for the food and nutraceutical industries

The potential of lipases (E.C.3.1.1.3.) as biocatalysts for the production of fatty acid derivatives for the food and nutraceutical industries, such as flavouring esters, fatty acid esters of antioxidants and structured lipids, is enormous, mainly due to their high regio- and stereo-selectivities, in addition to the other well-known advantages of enzymatic processes. The replacement of chemical catalysts by lipases presents great benefits in terms of the nutritional properties of the obtained products and environmental care. The reactions performed for the production of these compounds, as well as the best operation conditions, the biocatalysts used, reactor types and operation mode, are addressed in this review.