Non-invasive MR thermometry by 2D spectroscopic imaging of the Pr[MOE-DO3A] complex.

Future progress in regional hyperthermia requires a practical method for non-invasive thermometry. In magnetic resonance tomography, spin density, T1 relaxation time, diffusion coefficient and proton resonance frequency are candidates to measure temperature distributions. When used clinically in the pelvic region, all these methods are compromized by artifacts arising from different tissues, tissue alterations under hyperthermia, physiological and random movements, inhomogeneities, drift phenomena, and field instabilities. In this study a paramagnetic complex was evaluated, Pr[MOE-DO3A], with praseodymium as central atom, similar to common gadolinium containing MRI contrast media. The temperature dependence of its methoxy side group approximately -24 ppm downfield from the water resonance at 25 degrees C was employed to determine 2-D temperature distributions in a cylindrical agar phantom containing 9.5 mM of Pr[MOE-DO3A]. The phantom was heated externally through a water jacket creating a stationary temperature distribution throughout the phantom. At first, the correlation between temperature and the chemical shift of the methyl group of the lanthanide complex Pr[MOE-DO3A] was determined. Calibration curves obtained exhibited a linear relationship of 0.12 +/- 0.01 ppm/degree C, nearly independent from the surrounding medium. Local temperature distributions were determined employing the spatially resolved method of spectroscopic imaging (SI). 2-D spectroscopic images for three orthogonal slices were obtained by narrow-band excitation and 16 phase encoding steps in two dimensions. The FOV was 180 mm and the slice thickness in all cases was 20 mm for maximal spatial temperature resolution (11.2 x 11.2 mm2). The results indicate a measurement time of about 5s per acquisition under the following conditions: An estimated concentration of 1 mmol/l, a reduced matrix size of 8 x 8, and a reduced repetition time of 3 x T1 (TR approximately 85 ms). Those SI measurements produced a SNR of approximately 4 per acquisition, a measurements duration of 10-20 s, equivalent to two to four acquisitions per spectrum, seem sufficient for online temperature monitoring during hyperthermia. The in vitro data suggest the spectroscopic temperature measurement utilizing a temperature-sensitive Pr[MOE-DO3A] complex with a therapeutically realistic concentration of 1 mmol/l to be suitable for clinical use. Compared to the methods tested so far (rho, T1, diffusion, proton resonance), the method presented has the unique advantage of being less susceptible to artifacts. The competing methods of non-invasive thermometry employing magnetic resonance imaging are currently being investigated using the same experimental setup.

[Thermometry by measuring the chemical shift of lanthanide complex]. / Thermometrie durch Messung der chemischen Verschiebung eines Lanthanidenkomplexes.

BACKGROUND: In the long-term, non-invasive thermometry is vital for the continued clinical and technological development of regional hyperthermia. In magnetic resonance tomography. T1 relaxation time, diffusion and proton resonance frequency are used to measure temperature distributions. When used clinically in the pelvic region, all of these methods are plagued with errors and artefacts on account of the tissue relationships, tissue changes under hyperthermia, physiological and stochastic movements, inhomogeneities, drift phenomena and instabilities. MATERIAL AND METHOD: We tested the relationship between the temperature and the chemical shift of a methyl group of a lanthanide complex with central atom praseodymium (Pr-MOE-DO3A. Schering AG). To do this we used cylindrical phantoms containing a 5-mmol-solution of this temperature-sensitive substance. High resolution spectra and relaxation times were determined in a Bruker AMX at 11.5 T. A calibration curve was then recorded by a Siemens Magnetom SP63 at 1.5 T. Local temperature distributions were determined using the chemical shift imaging method, with a matrix size of 16 x 8 and a narrow-band excitation pulse. The temperature distribution was created using a Nd:YAG laser applicator. RESULTS: At a distance of -25.7 ppm from the water line, we found a singlet line with a temperature-dependent chemical shift of 0.13 ppm/C. In the phantom experiment we found that the chemical shift had a linear relationship with a gradient independent of the surroundings, and a temperature resolution of +/-0.6 degree C. With a concentration of 1 mmol/l, a matrix size of 8 x 8 and a measurement period of 5 s per acquisition, phantom measurements using the CSI method produced a signal to noise ratio of 3.5 per acquisition, i.e a measurement period of 10 to 20 s per spectrum. CONCLUSIONS: Our in vitro data show that spectroscopic temperature measurement using a temperature-sensitive praseodymium complex with a therapeutically practical concentration of 1 mmol/l already appears to be suitable for clinical use Compared with the methods tested so far (T1, diffusion, proton resonance), this method has the special advantage of not being very susceptible to artefacts. The competing methods of non-invasive thermometry using magnetic resonance tomography/spectroscopy will be investigated next.