Electrochemical oxidation of palm oil mill effluent using platinum as anode: Optimization using response surface methodology.

This work investigates the electrochemical oxidation of palm oil mill effluent (POME) treatment using platinum (Pt) as anode and graphite as a cathode. The response surface methodology was used to investigate the relationships between different factors conditions (voltage, electrolysis time and chemical support) and responses of the treatment (chemical oxygen demand reduction, colour removal, and total oil removal). A quadratic mathematical model was chosen for all responses using Box-Behnken Design (BBD) with R2 0.9853 for COD reduction, R2 0.9478 for colour removal and R2 0.9185 for total oil removal. According to Derringer's function desirability, under the optimum condition (Voltage 15, electrolysis time 2 h, and 19.95 mg/L NaCl) of POME treatment, 84% of COD reduction, 98% of colour removal and 99% total oil of removal could be achieved. These results indicate that platinum as an anode material is effective for the electrochemical oxidation treatment of POME.

Eco-friendly synthesis of cobalt-zinc ferrites using quince extract for adsorption and catalytic applications: An approach towards environmental remediation.

Cobalt-zinc ferrite nanoparticles were synthesized using environmentally friendly approach with quince extract as a reducing agent. Crystal structure and morphology of the obtained materials were studied by XRD, SEM-EDS, Mössbauer and IR spectroscopy. The synthesized nanoparticles have a cubic spinel structure and crystallite size ranging from 5 to 9 nm. The infrared spectra contain characteristic absorption bands for the MA-O (∼560 cm-1) and MB-O bonds (∼420 cm-1). Force constants were calculated for both tetrahedral and octahedral bonds. As the Co content increases, the force constant for the tetrahedral bond increases and the force constant for the octahedral bond decreases. The obtained ferrite nanoparticles have good magnetization as shown by VSM (in the range from 36 to 67 emu/g). Magnetic nanoparticles CoxZn1-xFe2O4 were also tested for induction heating with electromagnetic field. The sample with x (Co) = 0.4 has the highest specific absorption rate. The synthesized samples were tested as adsorbents using the Congo Red dye as model pollutant. The best adsorbent was pure zinc ferrite with the adsorption capacity of 24.7 mg/g. The catalytic activity of the obtained ferrites for the decomposition of H2O2 was studied as well. The most active catalyst was pure cobalt ferrite. Probably, the active centers are octahedral cobalt ions. Thus, the obtained magnetic nanoparticles can be used for the adsorptive removal of pollutants, catalytic decomposition of the H2O2 and low-frequency hyperthermia.

Guar gum-crosslinked-Soya lecithin nanohydrogel sheets as effective adsorbent for the removal of thiophanate methyl fungicide.

Rapid increase in use of fungicides for the agricultural and industrial purposes has marked the deterioration of water resources which ultimately affects the human life. Accordingly, various attempts have been made in the removal of these noxious compounds. In the same context, we are presenting biopolymers based nanohydrogel sheets; guar gum-crosslinked-Soya lecithin nanohydrogel sheets (GG-crosslinked-SY NHS) used for the effective removal of a fungicide; thiophanate methyl from aqueous solution. Guar gum and soya lecithin were employed as the biopolymers in the fabrication of nanohydrogel sheets due to their non- toxic nature, easy availability, cheapness and significant properties. Due to the presence of highly reactive functional groups onto the surface of GG-crosslinked-SY NHS, good adsorption results have been obtained. Maximum adsorption capacity of 59.205mg/g was observed with 20mg GG-crosslinked-SY NHS and 25ppm thiophanate methyl solution concentration as calculated from the Langmuir isotherm. Results showed that neutral pH favoured the adsorption process. Kinetics results were indicative of the physical interactions between the thiophanate methyl and GG-crosslinked-SY NHS surface. Thermodynamic results have shown the spontaneous and endothermic adsorption process.

Efficient removal of toxic phosphate anions from aqueous environment using pectin based quaternary amino anion exchanger.

Pectin based quaternary amino anion exchanger (Pc-QAE) was prepared using simple crosslinking polymerization method. This anion exchanger was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Pc-QAE was applied for the removal of phosphate anion from the aqueous solution. The adsorption process which was pH dependent showed maximum adsorption of phosphate anions at pH 7. Pc-QAE showed good monolayer adsorption capacity for phosphate anions which demonstrated its good capability towards Langmuir isotherm model. Moreover, the adsorption was evaluated thermodynamically and the negative value of Gibbs free energy (-1.791KJ/mol) revealed the spontaneity of adsorption process. The value of ΔH° and ΔS° were found to be 15.28 and 49.48KJ/mol, respectively representing the endothermic nature and enhancement in degree of freedom due to the adsorption process.