Effects of selenium supplementation on the growth performance, slaughter characteristics, and blood biochemistry of naked neck chicken.

This study examined how selenium-supplemented diets affected the performance of naked neck chickens. The birds were fed both organic and inorganic selenium at 0.30 ppm, while the control diet did not include any additional selenium. A total of 225 one-day-old naked neck chicks were randomly divided into 3 experimental groups, each of which was replicated 5 times (replicates) and contained 15 birds. This was done using a completely randomized design. The data was collected after growth, meat quality, and blood profile parameters were assessed. The findings showed that the birds fed inorganic selenium in the diet displayed increased (P < 0.05) feed intake followed by those administered organic selenium and the control diet. On the other hand, birds fed organic selenium in the diet showed enhanced body weight gain and better feed conversion ratio (P < 0.05). Similarly, organic selenium supplementation increased (P < 0.05) breast and thigh weight compared to inorganic selenium, but no other metrics, such as dressing percentage, drumstick weight, liver weight, gizzard weight, heart weight, or wing weight, significantly differed between treatments (P > 0.05). When compared to birds fed inorganic Se and control diet, the birds fed organic Se had greater (P < 0.05) blood levels of total protein and globulin. Additionally, it was discovered that organic Se-fed birds had greater (P < 0.05) blood Se concentrations than control and inorganic Se-fed birds. However, no differences between treatments were found in albumin, glucose, cholesterol, triglycerides, or uric acid (P > 0.05). In conclusion, adding Se-enriched yeast, as an organic selenium source, to diets may enhance the poor growth and slaughter characteristics of naked neck chicks without negatively affecting blood chemistry.

Rapid Determination and Quantification of Nutritional and Poisonous Metals in Vastly Consumed Ayurvedic Herbal Medicine (Rejuvenator Shilajit) by Humans Using Three Advanced Analytical Techniques.

Shilajit is used commonly as Ayurvedic medicine worldwide which is Rasayana herbo-mineral substance and consumed to restore the energetic balance and to prevent diseases like cognitive disorders and Alzheimer. Locally, Shilajit is applied for patients diagnosed with bone fractures. For safety of the patients, the elemental analysis of Shilajit is imperative to evaluate its nutritional quality as well as contamination from heavy metals. The elemental composition of Shilajit was conducted using three advanced analytical techniques (LIBS, ICP, and EDX). For the comparative studies, the two Shilajit kinds mostly sold globally produced in India and Pakistan were collected. Our main focus is to highlight nutritional eminence and contamination of heavy metals to hinge on Shilajit therapeutic potential. In this work, laser-induced breakdown spectroscopy (LIBS) was applied for qualitative and quantitative analysis of the Shilajit. Our LIBS analysis revealed that Shilajit samples composed of several elements like Ca, S, K, Mg, Al, Na, Sr, Fe, P, Si, Mn, Ba, Zn, Ni, B, Cr, Co, Pb, Cu, As, Hg, Se, and Ti. Indian and Pakistani Shilajits were highly enriched with Ca, S, and K nutrients and contained Al, Sr, Mn, Ba, Zn, Ni, B, Cr, Pb, As, and Hg toxins in amounts that exceeded the standard permissible limit. Even though the content of most elements was comparable among both Shilajits, nutrients, and toxins, in general, were accentuated more in Indian Shilajit with the sole detection of Hg and Ti. The elemental quantification was done using self-developed calibration-free laser-induced breakdown spectroscopy (CF-LIBS) method, and LIBS results are in well agreement with the concentrations determined by standard ICP-OES/MS method. To verify our results by LIBS and ICP-OES/MS techniques, EDX spectroscopy was also conducted which confirmed the presence above mentioned elements. This work is highly significant for creating awareness among people suffering due to overdose of this product and save many human lives.

Spectral analysis of Miracle Moringa tree leaves using X-ray photoelectron, laser induced breakdown and inductively coupled plasma -optical emission spectroscopic techniques.

The antioxidant Moringa oleifera (a medicinal plant) leaves (MOLs) containing diverse nutrients are highly beneficial for the human health. The MOLs upon consumption can lower the blood sugar, cure the heart diseases, and reduce the inflammation. In this perception, the "primary nutrients contents" in the dry MOLs (pellet samples) were evaluated for the first time using the XPS, LIBS and ICP-OES techniques. The XPS analysis of the MOLs showed the presence of vital elements like calcium (Ca), magnesium (Mg), manganese (Mn), copper (Cu), phosphorous (P), sulfur (S) and zinc (Zn). The LIBS analyses of the MOLs revealed the atomic and ionic spectral lines corresponding to the essential nutrients such as the Ca, Na, K, Fe, Mg, Mn, Cu, P, S and Zn. The calibration free LIBS algorithm (CF-LIBSA) was developed to quantify the content of each element in the dry MOLs. In addition, the LIBS results were validated by the analysis using ICP-OES standard analytical technique. The elemental contents in the MOLs obtained from the CF-LIBS analyses were counter verified by the ICP-OES results. Present results are highly valuable for the development of a traditional herbal medicine using the miracle MOLs.

Qualitative and quantitative analysis of human nails to find correlation between nutrients and vitamin D deficiency using LIBS and ICP-AES.

In this work, we analysed human fingernails of people who suffer from vitamin D deficiency using the laser-induced breakdown spectroscopy(LIBS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES)techniques. The measurements have been conducted on 71 nail samples collected randomly from volunteers of different genders and ages ranged between 20 and 50 years. The main aim of this study is to find the correlation between vitamin D deficiency and the intensity of some dominated lines in the LIBS spectra. A LIBS spectrum consists of dominant lines of fifteen elements including calcium, magnesium, sodium, potassium, titanium, iron, chloride, sulphur, copper, chromium, zinc, nitrogen, phosphor, and oxygen. By recording the spectrum in specific ranges and focusing on calcium, magnesium, sodium, and potassium, we found a correlation between the intensity of the potassium (K) lines at (766.5 and 769.9 nm)and vitamin D level in both age groups (20 and 25 years old), with weak correlation for the calcium (Ca), magnesium (Mg), and sodium (Na) lines. To verify the validity of the LIBS results, we analysed the nail samples with ICP, a standard analytical technique. The elements detected with our LIBS technique are in a good agreement with those identified by ICP-AES. From the health and physiological perspectives, the LIBS system, which is used for spectral analysis in this work, is appropriate for diagnostic purposes such as to find the correlation between vitamin D deficiency and potassium content, especially for hypertensive patients who simultaneously take potassium-based medication and vitamin D supplement.

Direct spectral analysis of tea samples using 266 nm UV pulsed laser-induced breakdown spectroscopy and cross validation of LIBS results with ICP-MS.

Tea is one of the most common and popular beverages spanning vast array of cultures all over the world. The main nutritional benefits of drinking tea are its anti-oxidant properties, presumed protection against certain cancers, inhibition of inflammation and possible protective effects against diabetes. Laser induced breakdown spectrometer (LIBS) was assembled as a powerful tool for qualitative and quantitative analysis of various brands of tea samples using 266 nm pulsed UV laser. LIBS spectra for six brands of tea samples in the wavelength range of 200-900 nm was recorded and all elements present in our tea samples were identified. The major toxic elements detected in several brands of tea samples were bromine, chromium and minerals like iron, calcium, potassium and silicon. The spectral assignment was conducted prior to the determination of concentration of each element. For quantitative analysis, calibration curves were drawn for each element using standard samples prepared in known concentration in the tea matrix. The plasma parameters (electron temperature and electron density) were also determined prior to the tea samples spectroscopic analysis. The concentration of iron, chromium, potassium, bromine, copper, silicon and calcium detected in all tea samples was between 378-656, 96-124, 1421-6785, 99-1476, 17-36, 2-11 and 92-130 mg L(-1) respectively. The limits of detection estimated for Fe, Cr, K, Br, Cu, Si, Ca in tea samples were 22, 12, 14, 11, 6, 1 and 12 mg L(-1) respectively. To further confirm the accuracy of our LIBS results, we determined the concentration of each element present in tea samples by using standard analytical technique like ICP-MS. The concentrations detected with our LIBS system are in excellent agreement with ICP-MS results. The system assembled for spectral analysis in this work could be highly applicable for testing the quality and purity of food and also pharmaceuticals products.

Synthesis, characterization and photocatalytic activity of Al2O3-TiO2 based composites.

The synthesis, characterization and photocatalytic performance of non-traditional Al2O3-TiO2-based photocatalysts is reported. Al2O3-TiO2 support was loaded with various fractions of CuO and ZrO2. A sound agreement was observed between the bandgaps of synthesized powders measured by UV-Visible diffuse reflectance spectroscopy (DRS) in the solid phase and UV-Visible spectroscopy in the aqueous medium. X-ray diffraction (XRD) analysis revealed the composite nature of the catalysts with the retention of individual identity of each component. The average crystallite size of the individual component was found to be in the range of 20 to 40 nm. Scanning electron microscopy (SEM) analysis authenticated the presence of CuO and ZrO2 at the surface of Al2O3-TiO2 support, while Rutherford Back Scattering Spectroscopy (RBS) confirmed the quantity of the modifiers as per theoretical calculations. The composites showed an enhanced photocatalytic activity in sunlight compared to Al2O3-TiO2 for the degradation of dyes. Efforts were made to elucidate the enhanced sunlight response of the synthesized composite catalysts compared to Al2O3-TiO2. As monitored by ion chromatography (IC), the synthesized photocatalysts completely mineralized the dyes leaving behind inorganic ions in solution. The kinetics of photocatalytic degradation of dyes was evaluated for optimum correlation with the existing models. The stability of the photocatalysts against the photo-corrosion was monitored by analyzing the samples for respective metals in solution after sunlight exposure. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of Environmental Science and Health, Part A, to view the supplemental file.

Monitoring and assessment of toxic metals in Gulf War oil spill contaminated soil using laser-induced breakdown spectroscopy.

Laser-induced breakdown spectroscopy (LIBS) was applied for the detection of toxic metals in oil spill contaminated soil (OSCS). The OSCS samples were collected from Khursania Saudi Arabia along the coast of Persian Gulf exposed to oil spills in 1991 Gulf war. Environmentally important elements like Aluminum Magnesium, Calcium, Chromium, Titanium, Strontium, Iron, Barium, Sodium, potassium, Zirconium and Vanadium from the contaminated soil have been detected. Optimal experimental conditions for analysis were investigated. The LIBS system was calibrated using standard samples containing these trace elements. The results obtained using Laser-Induced Breakdown Spectroscopy (LIBS) were compared with the results obtained using Inductively Coupled Plasma Emission Spectroscopy (ICP). The concentrations of some elements (Ba and Cr) were found higher than permissible safe limits. Health risks associated with exposure to such toxic elements are also discussed.

Measurement of nutrients in green house soil with laser induced breakdown spectroscopy.

Laser-induced breakdown spectroscopy (LIBS) has been applied for the determination of nutrients in the green house soil samples. We determined appropriate spectral signatures of vital nutrients and calibrated the method to measure the nutrients in a naturally fertilized plot, cultivated with tomato and cucumber plants. From the calibration curves we predicted the concentrations of important nutrients such as Ca, K, P, Mg, Fe, S, Ni and Ba in the soil. Our measurements proved that the LIBS method rapidly and efficiently measures soil nutrients with excellent detection limits of 12, 9, 7, 9, 7, 10, 8 and 12 mg/kg for Ca, K, P, Mg, Fe, S, Ni and Ba respectively with a precision of approximately 2%, The unique features of LIBS for rapid sample analysis demonstrated by this study suggests that this method offers promise for precision measurements of soil nutrients as compared to conventional methods in short span of time.