An energy-harvesting scheme employing CuGaSe2 quantum dot-modified ZnO buffer layers for drastic conversion efficiency enhancement in inorganic-organic hybrid solar cells.

We demonstrated a promising route to enhance the performance of inverted organic photovoltaic (OPV) devices by the incorporation of CuGaSe2 (CGS) quantum dots (QDs) into the ZnO buffer layer of P3HT:PCBM-based devices. The modification of QDs provides better band alignment between the organic/cathode interface, improves ZnO crystal quality, and increases photon absorption, leading to more effective carrier transport/collection. By employing this energy-harvesting scheme, short-circuit current density, open-circuit voltage, and fill factor of the OPV device after CGS QD modification are improved by 9.43%, 7.02% and 6.31%, respectively, giving rise to a 23.8% enhancement in the power conversion efficiency.

ZnO1-x nanorod arrays/ZnO thin film bilayer structure: from homojunction diode and high-performance memristor to complementary 1D1R application.

We present a ZnO(1-x) nanorod array (NR)/ZnO thin film (TF) bilayer structure synthesized at a low temperature, exhibiting a uniquely rectifying characteristic as a homojunction diode and a resistive switching behavior as memory at different biases. The homojunction diode is due to asymmetric Schottky barriers at interfaces of the Pt/ZnO NRs and the ZnO TF/Pt, respectively. The ZnO(1-x) NRs/ZnO TF bilayer structure also shows an excellent resistive switching behavior, including a reduced operation power and enhanced performances resulting from supplements of confined oxygen vacancies by the ZnO(1-x) NRs for rupture and recovery of conducting filaments inside the ZnO TF layer. A hydrophobic behavior with a contact angle of ~125° can be found on the ZnO(1-x) NRs/ZnO TF bilayer structure, demonstrating a self-cleaning effect. Finally, a successful demonstration of complementary 1D1R configurations can be achieved by simply connecting two identical devices back to back in series, realizing the possibility of a low-temperature all-ZnO-based memory system.

Periodic Si nanopillar arrays by anodic aluminum oxide template and catalytic etching for broadband and omnidirectional light harvesting.

Large-area, periodic Si nanopillar arrays (NPAs) with the periodicity of 100 nm and the diameter of 60 nm were fabricated by metal-assisted chemical etching with anodic aluminum oxide as a patterning mask. The 100-nm-periodicity NPAs serve an antireflection function especially at the wavelengths of 200~400 nm, where the reflectance is decreased to be almost tenth of the value of the polished Si (from 62.9% to 7.9%). These NPAs show very low reflectance for broadband wavelengths and omnidirectional light incidence, attributed to the small periodicity and the stepped refractive index of NPA layers. The experimental results are confirmed by theoretical calculations. Raman scattering intensity was also found to be significantly increased with Si NPAs. The introduction of this industrial-scale self-assembly methodology for light