Effect of return activated sludge diversion ratio on phosphorus removal performance in side-stream enhanced biological phosphorus removal (S2EBPR) process.

In this study, a lab-scale continuous flow side-stream enhanced biological phosphorus (P) removal (S2EBPR) reactor was operated for 247 days treating synthetic wastewater with influent carbon to phosphorus (C/P) ratio of 25.0 g COD/g P and influent PO43--P of 7.4 ± 0.3 mg P/L. The effect of the return activated sludge (RAS) diversion ratio on S2EBPR reactor was investigated by comparing P removal performance, microbial activity, and community structure. The results showed that the RAS diversion ratio of 8.0%, by yielding a side-stream sludge retention time (SRTSS) of ∼60 h, resulted in the lowest effluent PO43--P concentration of 0.5 ± 0.3 mg P/L. The results of in situ process profiles and ex situ P release and uptake batch tests under different RAS diversion conditions showed that the more anaerobic P release was obtained in the side-stream reactor, the higher the P removal efficiency and EBPR activity were achieved. The stoichiometric ratios observed in EBPR activity tests indicated a polyphosphate accumulating organisms (PAOs) metabolism mainly dependent on the glycolysis pathway. The results of microbial ecology analysis revealed that the optimized SRTSS would give a competitive advantage to PAOs in the S2EBPR process. By obtaining statistically reliable results, this study would provide guidance for wastewater treatment plants to achieve optimal P removal performance in S2EBPR configuration.

Partial Nitrification and Enhanced Biological Phosphorus Removal in a Sequencing Batch Reactor Treating High-Strength Wastewater.

Complex and high levels of various pollutants in high-strength wastewaters hinder efficient and stable biological nutrient removal. In this study, the changes in pollutant removal performance and microbial community structure in a laboratory-scale anaerobic/aerobic sequencing batch reactor (SBR) treating simulated pre-fermented high-strength wastewater were investigated under different influent loading conditions. The results showed that when the influent chemical oxygen demand (COD), total nitrogen (TN), and orthophosphate (PO43--P) concentrations in the SBR increased to 983, 56, and 20 mg/L, respectively, the COD removal efficiency was maintained above 85%, the TN removal efficiency was 64.5%, and the PO43--P removal efficiency increased from 78.3% to 97.5%. Partial nitrification with simultaneous accumulation of ammonia (NH4+-N) and nitrite (NO2--N) was observed, which may be related to the effect of high influent load on ammonia- and nitrite-oxidising bacteria. The biological phosphorus removal activity was higher when propionate was used as the carbon source instead of acetate. The relative abundance of glycogen accumulating organisms (GAOs) increased significantly with the increase in organic load, while Tetrasphaera was the consistently dominant polyphosphate accumulating organism (PAO) in the reactor. Under high organic loading conditions, there was no significant PAO-GAO competition in the reactor, thus the phosphorus removal performance was not affected.