Cryptocarya moschata extract decreases single and mixed biofilms on acrylic resins.

OBJECTIVE: This study proposed to assess the effect of Cryptocarya moschata extract on single and mixed biofilms formed on denture base and reline acrylic resin. MATERIALS AND METHODS: Single and mixed biofilms of Candida albicans and Streptococcus mutans were formed on the samples and treated with C. moschata extract; Nystatin solution at 100,000 IU/mL or Penicillin antibiotic solution at 100,000 IU/mL; or PBS solution. Antimicrobial activity was analyzed by counting colony-forming units, metabolism assay, assessment of protein components of the biofilm matrix, and of cell viability using confocal laser scanning microscopy (CLSM). Data were submitted to ANOVA and Tukey's post-test (α = 0.05). RESULTS: Cryptocarya moschata extract reduced cell viability of C. albicans and S. mutans single and mixed biofilms formed on samples. For all types of biofilms in the C. moschata group, there was a log reduction of the biofilm, proven by the Alamar Blue assay. Analyzing the extracellular matrix protein components, groups treated with the extract exhibited a lower level of fluorescence compared to the PBS groups. Reduction in thickness biofilm and viable cells was perceptible in the C. moschata group when assessing through CLSM. CONCLUSION: Cryptocarya moschata extract reduced the single and mixed biofilms of C. albicans and S. mutans on acrylic resins.

In vivo antifungal activity and biocompatibility of Cryptocarya moschata.

The objective of this study was evaluate, in vivo model, the antifungal activity of Cryptocarya moschata extract against Candida albicans and its biocompatibility. The animals (N = 50) were divided into groups (n = 5): CI/CG: candidiasis was induced and treated with C. moschata extract (0.045 g/mL); CI/NG: candidiasis was induced and treated with nystatin; CI/NT: candidiasis was induced and no treated; CI/CG-2: candidiasis was induced and treated with C. moschata extract (0.045 g/mL), reapplied after 24 h; CI/NG-2: candidiasis was induced and treated with nystatin, reapplied after 24 h; NCI/NT: candidiasis was not induced and no treated; NCI/CG: candidiasis was not induced and treated with C. moschata extract (0.045 g/mL); NCI/NG: candidiasis was not induced treated with nystatin; NCI/CG-2: candidiasis was not induced and treated with C. moschata extract (0.045 g/mL), reapplied after 24 h; NCI/NG-2: candidiasis was not induced and treated with nystatin, reapplied after 24 h. The fungi present in the lingual dorsum of mice were collected and analyzed by the count of colony-forming units. In addition, histological analysis was performed. Histologically, there was no cell damage in the mice's tongue, and there was a decrease in Candida biofilm, similar to the use of nystatin. It was concluded that the C. moschata extract was effective against C. albicans and was biocompatible.

Antimicrobial efficacy and biocompatibility of extracts from Cryptocarya species.

This study evaluated the efficacy of Cryptocarya spp extracts on biofilm of Candida albicans and its biocompatibility. Mature biofilm of C. albicans was formed on denture base acrylic resin samples and the fungicidal effect of the extracts was evaluated by Alamar Blue® assay, counting colony-forming units (CFU/mL) and confocal laser scanning microscopy (CLSM). Cytotoxicity of extracts from Cryptocarya species was evaluated by AlamarBlue® assay, using normal oral keratinocytes (NOK) cells. In additional, Analysis of plant extracts by ultra-high-performance liquid chromatography-diode array detector-tandem mass spectrometry (UPLC-DAD-MS) was performed. The results showed significant reduction in the cellular metabolism and in the number of CFU/mL of C. albicans (p<0.05). The concentration of 0.045 g/mL completely inhibited the number of CFU/mL. Regarding cytotoxicity, all extracts decreased cell viability compared to the control group. CLSM analysis showed predominance of live cells, but with a great difference between the groups. Antimicrobial activity of extracts from Cryptocarya on C. albicans biofilm was confirmed. However, all extracts showed toxicity on NOK cells.

Antimicrobial photodynamic therapy effectiveness against susceptible and methicillin-resistant Staphylococcus aureus biofilms.

BACKGROUND: Staphylococcus aureus have a great ability to become rapidly resistant to conventional antimicrobial therapies. This study evaluated the efficacy of antimicrobial photodynamic therapy (aPDT) mediated by Curcumin (Cur) and light-emitting diode (LED) in the inactivation of biofilms of methicillin susceptible and resistant S. aureus (MSSA and MRSA, respectively). METHODS: Biofilms were treated with Cur (20, 40 or 80 µM) and illuminated with LED source (455 ± 3 nm; 5.28 J/cm2) (aPDT groups), or treated either with Cur or LED only. Other samples were not exposed to Cur or LED (negative control). The biofilms viability after all experimental conditions were evaluated by counting the number of colonies (CFU/mL) and XTT assay. Additional samples were also evaluated by LIVE/DEAD® staining using confocal laser scanning microscopy (CLSM). Data were analyzed by ANOVAs followed by the Games-Howell post hoc test (α = 0.05). RESULTS: For both strains, all aPDT groups significantly reduced both CFU/mL and metabolic activity of biofilms compared to the negative control (p < 0.001). The results were enhanced when 80 µM of Cur was used. CLSM images showed that both bacteria biofilms submitted to aPDT had a large number of red-stained colonies, especially at aPDT80. In general, MRSA biofilms tended to be less susceptible to aPDT than MSSA biofilms. CONCLUSIONS: It can be concluded that aPDT mediated by Cur and LED was an efficient method to inactivate 48 -h biofilms of both S. aureus strains.

Virulence factors of fluconazole-susceptible and fluconazole-resistant Candida albicans after antimicrobial photodynamic therapy.

This study evaluated the effects of antimicrobial photodynamic therapy (aPDT) mediated by Photodithazine® (PDZ) and LED light on the virulence factors of fluconazole-susceptible (CaS) and fluconazole-resistant (CaR) Candida albicans. Standardized suspensions of strains were prepared (107), and after 48 h of biofilm formation, these strains were incubated with PDZ (100 mg/L) for 20 min and exposed to LED light (660 nm, 37.5 J/cm2). Additional samples were treated with PDZ or light only, and the control consisted of biofilms that received no treatment. After aPDT, the cells were recovered and the virulence factors were evaluated. To analyze the capacity of adhesion, cells were recovered after aPDT and submitted to the adhesion process in the bottom of a 96-well plate. After this, metabolic activity tests (XTT assay) and cell viability (colony forming units per milliliter, CFU/mL) were applied. To evaluate the biofilm-forming ability after aPDT, the cells recovered were submitted to biofilm formation procedures, and the biofilm formed was evaluated by XTT, CFU/mL, and total biomass (crystal violet) tests. Lastly, the capacity for synthesizing protease and phospholipase enzymes after aPDT was evaluated by fluorimetric tests. Data were analyzed by two- or three-way ANOVA tests (p ≤ 0.05). It was verified that aPDT reduced the viability of both strains, fluconazole-susceptible and fluconazole-resistant C. albicans. It was also observed that the CaR strain had lower susceptibility to the aPDT when compared with the CaS strain. However, regarding the virulence factors evaluated, it was demonstrated that aPDT did not alter the adherence and biofilm formation ability and enzymatic production.

Evaluation of different treatment methods against denture stomatitis: a randomized clinical study.

OBJECTIVE: The aim of this clinical study was to determine the efficacy of Uncaria tomentosa (cat's claw) against denture stomatitis (DS). STUDY DESIGN: Fifty patients with DS were randomly assigned into 3 groups to receive 2% miconazole, placebo, or 2% U tomentosa gel. DS level was recorded immediately, after 1 week of treatment, and 1 week after treatment. The clinical effectiveness of each treatment was measured using Newton's criteria. Mycologic samples from palatal mucosa and prosthesis were obtained to determinate colony forming units per milliliter (CFU/mL) and fungal identification at each evaluation period. RESULTS: Candida species were identified with HiCrome Candida and API 20C AUX biochemical test. DS severity decreased in all groups (P < .05). A significant reduction in number of CFU/mL after 1 week (P < .05) was observed for all groups and remained after 14 days (P > .05). C albicans was the most prevalent microorganism before treatment, followed by C tropicalis, C glabrata, and C krusei, regardless of the group and time evaluated. U tomentosa gel had the same effect as 2% miconazole gel. CONCLUSIONS: U tomentosa gel is an effective topical adjuvant treatment for denture stomatitis.

Surface roughness of denture base and reline materials after disinfection by immersion in chlorhexidine or microwave irradiation.

BACKGROUND: This study evaluated the effect of disinfection by immersion and microwave irradiation on the roughness of one denture base resin (Lucitone-L) and five relining materials, three hard (Tokuyama Rebase II-TR, New Truliner-NT, Ufigel Hard-UH) and two resilient (Trusoft-T, Sofreliner-S). METHODS: Fifty specimens were made and divided into groups: CL2 specimens were brushed with 4% chlorhexidine (1 min), immersed in the same solution (10 min) and immersed in water (3 min); MW2 specimens were immersed in water and microwave irradiated (650W; 6 min); CL2 and MW2 specimens were disinfected twice; CL7 and MW7 specimens were submitted to seven cycles using chlorhexidine or microwave irradiation, respectively; W specimens were not disinfected and remained in water (37°C; 7 days). RESULTS: Results were statistically analysed (p = 0.05) and revealed that, at baseline, the highest mean value was observed for T (p < 0.001). Material NT showed increase in roughness after the first (p = 0.003), second (p = 0.001), seventh (p = 0.000) cycles of microwave disinfection and after 7 days of immersion in water (p = 0.033). CONCLUSIONS: Resilient liner S presented significant increase in roughness after the second cycle of disinfection with chlorhexidine (p = 0.003). Material T exhibited significantly decreased roughness in group W (p = 0.010), while microwaving produced severe alterations on its surface.

The occurrence of porosity in reline acrylic resins. Effect of microwave disinfection.

BACKGROUND: Microwave energy has proved to be an effective method for disinfecting acrylic dentures. However, the effect of microwave heating on the porosity of autopolymerising denture reline resins has not been investigated. OBJECTIVE: The purpose of the study was to determine the effect of microwave disinfection on the porosity of autopolymerised denture reline materials (Kooliner-K, New Truliner-NT, Tokuso Rebase Fast-TR and Ufi Gel Hard-UGH) and a conventional heat-polymerised denture base resin (Lucitone 550-L). MATERIAL AND METHODS: Specimens (10 mm x 20 mm x 1 mm) were obtained from the impression surface of the palatal mucosa in a single person and divided into four groups (n = 5). The porosity was evaluated after polymerisation (C1), after two cycles of microwave disinfection (MW2), after seven cycles of microwave disinfection (MW7) and after 7 days storage in water at 37 degrees C (C2). Specimens from group MW7 were exposed to microwave disinfection daily being stored in water at 37 degrees C between exposures. All the replicas were sputter coated with gold and micrographs/digital images were taken of each replica using scanning electron microscopy at magnification x 100. The SEM micrographs were then examined using an image analyser to determine the number of pores. Comparison between materials and groups were made using Kruskal-Wallis tests. RESULTS: MW7 resulted in a significant increase in the number from the pores of material K, but decreased in number in reline material TR and UGH reline resin. The number of pores in materials NT and L remained unaffected following microwave disinfection. CONCLUSION: Differences in the porosity amongst the materials and for different experimental conditions were observed following microwave disinfection.