Pharmacological attributes of Bacopa monnieri extract: Current updates and clinical manifestation.

Bacopa monnieri has been used for centuries in Ayurvedic medicine, alone or in combination with other herbs, as a memory and learning enhancer, sedative, and anti-epileptic. This review aimed to highlight the health benefits of B. monnieri extracts (BME), focusing on anti-cancer and neurodegenerative diseases. We examined the clinical studies on phytochemistry and pharmacological application of BME. We further highlighted the mechanism of action of these extracts in varying types of cancer and their therapeutic implications. In addition, we investigated the underlying molecular mechanism in therapeutic interventions, toxicities, safety concerns and synergistic potential in cognition and neuroprotection. Overall, this review provides deeper insights into the therapeutic implications of Brahmi as a lead formulation for treating neurological disorders and exerting cognitive-enhancing effects.

Chromium toxicity, speciation, and remediation strategies in soil-plant interface: A critical review.

In recent decades, environmental pollution with chromium (Cr) has gained significant attention. Although chromium (Cr) can exist in a variety of different oxidation states and is a polyvalent element, only trivalent chromium [Cr(III)] and hexavalent chromium [Cr(VI)] are found frequently in the natural environment. In the current review, we summarize the biogeochemical procedures that regulate Cr(VI) mobilization, accumulation, bioavailability, toxicity in soils, and probable risks to ecosystem are also highlighted. Plants growing in Cr(VI)-contaminated soils show reduced growth and development with lower agricultural production and quality. Furthermore, Cr(VI) exposure causes oxidative stress due to the production of free radicals which modifies plant morpho-physiological and biochemical processes at tissue and cellular levels. However, plants may develop extensive cellular and physiological defensive mechanisms in response to Cr(VI) toxicity to ensure their survival. To cope with Cr(VI) toxicity, plants either avoid absorbing Cr(VI) from the soil or turn on the detoxifying mechanism, which involves producing antioxidants (both enzymatic and non-enzymatic) for scavenging of reactive oxygen species (ROS). Moreover, this review also highlights recent knowledge of remediation approaches i.e., bioremediation/phytoremediation, or remediation by using microbes exogenous use of organic amendments (biochar, manure, and compost), and nano-remediation supplements, which significantly remediate Cr(VI)-contaminated soil/water and lessen possible health and environmental challenges. Future research needs and knowledge gaps are also covered. The review's observations should aid in the development of creative and useful methods for limiting Cr(VI) bioavailability, toxicity and sustainably managing Cr(VI)-polluted soils/water, by clear understanding of mechanistic basis of Cr(VI) toxicity, signaling pathways, and tolerance mechanisms; hence reducing its hazards to the environment.

Exploration of ethnomedicinal plants and their practices in human and livestock healthcare in Haripur District, Khyber Pakhtunkhwa, Pakistan.

BACKGROUND: The utilization of plants and plant resources for various ethnobotanical purposes is a common practice in local towns and villages of developing countries, especially in regard to human and veterinary healthcare. For this reason, it is important to unveil and document ethnomedicinal plants and their traditional/folk usage for human and livestock healthcare from unexplored areas. Here we advance our findings on ethnomedicinal plants from Haripur District, Pakistan, not only for conservation purposes, but also for further pharmacological screenings and applied research. METHODOLOGY: Information of ethnomedicinal plants was obtained using a carefully planned questionnaire and interviews from 80 local people and traditional healers (Hakims) in Haripur District, Pakistan, from 2015 to 2017. Informed consent was obtained from each participant before conducting the interview process. Quantitative ethnobotanical indices, such as relative frequency of citation (RFC), use value (UV) and Jaccard index (JI), were calculated for each recorded species. Correlation analysis between the RFC and UV was tested by Pearson's correlation, SPSS (ver. 16). RESULTS: A total of 80 plant species (33 herbs, 24 trees, 21 shrubs and 2 climbers) belonging to 50 families were being used in the study area to treat livestock and human diseases. Lamiaceae was the most dominant family with 7 species (8.7%), followed by Fabaceae with 6 species (7.5%), and Moraceae with 5 species (6.2%). Local people used different methods of preparation for different plant parts; among them, decoction/tea (22 species) was the popular method, followed by powder/grained (20 species) and paste/poultice (14 species). It was observed that most of the species (~ 12 to 16 species) were utilized to treat human and livestock digestive system-related problems, respectively. The Jaccard index found that plant usage in two studies (District Abbottabad and Sulaiman Range) was more comparable. Local people mainly relied on folk medicines due to their rich accessibility, low cost and higher efficacy against diseases. Unfortunately, this important traditional knowledge is vanishing fast, and many medicinal plants are under severe threat. The most threats associated to species observed in the study area include Dehri, Garmthun, Baghpur, Najafpur and Pharala. CONCLUSION: The study has indicated that local people have higher confidence in the usage of ethnomedicinal plants and are still using them for the treatment of various ailments. Comparative analysis with other studies may strongly reflected the novel use of these plants, which may be due to the deep-rooted and unique socio-cultural setup of the study area. However, awareness campaigns, conservation efforts and pharmacological and applied research are required for further exploration and may be a step in the right direction to unveil prospective pharmaceuticals.

Jellyfish Collagen: A Biocompatible Collagen Source for 3D Scaffold Fabrication and Enhanced Chondrogenicity.

Osteoarthritis (OA) is a multifactorial disease leading to degeneration of articular cartilage, causing morbidity in approximately 8.5 million of the UK population. As the dense extracellular matrix of articular cartilage is primarily composed of collagen, cartilage repair strategies have exploited the biocompatibility and mechanical strength of bovine and porcine collagen to produce robust scaffolds for procedures such as matrix-induced chondrocyte implantation (MACI). However, mammalian sourced collagens pose safety risks such as bovine spongiform encephalopathy, transmissible spongiform encephalopathy and possible transmission of viral vectors. This study characterised a non-mammalian jellyfish (Rhizostoma pulmo) collagen as an alternative, safer source in scaffold production for clinical use. Jellyfish collagen demonstrated comparable scaffold structural properties and stability when compared to mammalian collagen. Jellyfish collagen also displayed comparable immunogenic responses (platelet and leukocyte activation/cell death) and cytokine release profile in comparison to mammalian collagen in vitro. Further histological analysis of jellyfish collagen revealed bovine chondroprogenitor cell invasion and proliferation in the scaffold structures, where the scaffold supported enhanced chondrogenesis in the presence of TGFß1. This study highlights the potential of jellyfish collagen as a safe and biocompatible biomaterial for both OA repair and further regenerative medicine applications.

Impacts of Freezing Temperature Based Thermal Conductivity on the Heat Transfer Gradient in Nanofluids: Applications for a Curved Riga Surface.

The flow of nanofluid over a curved Riga surface is a topic of interest in the field of fluid dynamics. A literature survey revealed that the impacts of freezing temperature and the diameter of nanoparticles on the heat transfer over a curved Riga surface have not been examined so far. Therefore, the flow of nanoparticles, which comprises the influences of freezing temperature and nanoparticle diameter in the energy equation, was modeled over a curved Riga surface. The model was reduced successfully in the nondimensional version by implementing the feasible similarity transformations and effective models of nanofluids. The coupled nonlinear model was then examined numerically and highlighted the impacts of various flow quantities in the flow regimes and heat transfer, with graphical aid. It was examined that nanofluid velocity dropped by increasing the flow parameters γ and S, and an abrupt decrement occurred at the surface of the Riga sheet. The boundary layer region enhances for larger γ. The temperature distribution was enhanced for a more magnetized nanofluid, and the thermal boundary layer increased with a larger R parameter. The volume fraction of the nanoparticles favors the effective density and dynamic viscosity of the nanofluids. A maximum amount of heat transfer at the surface was observed for a more magnetized nanofluid.

Radiative Colloidal Investigation for Thermal Transport by Incorporating the Impacts of Nanomaterial and Molecular Diameters (dNanoparticles, dFluid): Applications in Multiple Engineering Systems.

Thermal enhancement and irreversible phenomena in colloidal suspension (Al2O3-H2O) is a potential topic of interest from the aspects of industrial, mechanical and thermal engineering; heat exchangers; coolant car radiators; and bio-medical, chemical and civil engineering. In the light of these applications, a colloidal analysis of Al2O3-H2O was made. Therefore, a colloidal model is considered and treated numerically. The significant influences of multiple parameters on thermal enhancement, entropy generation and Bejan parameter are examined. From the presented colloidal model, it is explored that Al2O3-H2O is better for the applications of mechanical and applied thermal engineering. Moreover, fraction factor tiny particles are significant parameters which enhanced the thermal capability of the Al2O3-H2O suspension.

γ-Nanofluid Thermal Transport between Parallel Plates Suspended by Micro-Cantilever Sensor by Incorporating the Effective Prandtl Model: Applications to Biological and Medical Sciences.

The flow of nanofluid between infinite parallel plates suspended by micro-cantilever sensors is significant. The analysis of such flows is a rich research area due to the variety of applications it has in chemical, biological and medical sciences. Micro-cantilever sensors play a significant role in accurately sensing different diseases, and they can be used to detect many hazardous and bio-warfare agents. Therefore, flow water and ethylene glycol (EG) composed by γ-nanoparticles is used. Firstly, the governing nanofluid model is transformed into two self-similar nanofluid models on the basis of their effective models. Then, a numerical method is adopted for solution purposes, and both the nanofluid models are solved. To enhance the heat transfer characteristics of the models, the effective Prandtl model is ingrained in the energy equation. The velocity F'(η) decreases with respect to the suction of the fluid, because more fluid particles drags on the surface for suction, leading to an abrupt decrement in F'(η). The velocity F'(η) increases for injection of the fluid from the upper end, and therefore the momentum boundary layer region is prolonged. A high volume fraction factor is responsible for the denser characteristics of the nanofluids, due to which the fluids become more viscous, and the velocity F'(η) drops abruptly, with the magnetic parameters favoring velocity F'(η). An increase in temperature ß ( η ) of Al2O3-H2O and γAl2O3-C2H6O2 nanofluids was reported at higher fraction factors with permeable parameter effects. Finally, a comparative analysis is presented by restricting the flow parameters, which shows the reliability of the study.

In vitro tissue culture model validation-the influence of tissue culture components on IPL energy output.

Intense pulsed light (IPL) has been used therapeutically in a number of clinical settings and has been shown to have a photobiomodulatory effect on connective tissue cells, such as those derived from skin and tendon. In vitro cell culture models are essential tools preclinically in investigating such treatment modalities, as they help in optimising parameters for successful treatment. However, as culture system components have been reported to absorb part of the irradiated energy, which in turn has a bearing on the amount of light reaching the cells, it is important to establish specific parameters for the particular in vitro model used. This study, therefore, investigates the effect of our tissue culture system components on the IPL energy delivered. Individual wells of multi-well plates were irradiated with IPL at different device settings and under variable culture conditions (e.g. in the absence or presence of cell culture media with or without the pH indicator dye, phenol red), and the energy lost through the culture system determined. Our data demonstrated that the IPL device delivered significantly lower outputs than those published, and energy absorption by the culture equipment would further reduce fluencies delivered to the cell monolayer. Furthermore, energy absorption by media containing phenol red was marginally greater than clear media and resulted in only a small increase in temperature, which would not be harmful to cells. The use of phenol red-containing media therefore is valid and physiologically relevant when examining light-culture system interactions.

Growth Factor and Intense Pulse Light in Flexor Tendon Repair: A Biomechanical Study at Strength and Gap Resistance.

BACKGROUND: Flexor tendon injuries are extremely common and they are usually the result of incised traumatic glass or knife injury. The process of tendon healing is a complicated and exceptionally-regimented mechanism that is originated and monitored by a vast number of diverse molecules. One of the most pivotal groups of mediators that are crucial to the healing process are growth factors (GF). Intense pulse light (IPL) can lead to evidence of new collagen formation with associated clinical improvement in tissue healing. The biological benefit of Intense pulse light (IPL) relies on judicious photothermolysis, where heat driven radiation is dissipated and focused at the cellular level. The aims of this study is to set out the effect of growth factor and IPL on healing following a tendon repair. METHODS: Bovine common digital extensor tendons (CDET) were used as an ex vivo model. 44 tendon repairs were performed by the lead author using 2.5 × magnification loupes and standard instruments. Clamped tendons were assigned into the following groups; control, IPL, GF, IPL and GF. After culturing, biomechanical testing was carried out using monotonic tensile testing with displacement-controlled uniaxial tension to failure. RESULTS: The mean values for ultimate tensile stress (UTS) for the control group was 53.51 N, for IPL it was 51.15 N, for growth factor was 70.10 N and for combined growth factor and IPL it was 75.16 N. CONCLUSIONS: This study showed significant improvement in UTS when repaired tendons were cultured with growth factor compared to control and IPL. This would suggest a biomechanical advantage for tendon healing.

Glycyrrhiza glabra HPLC fractions: identification of Aldehydo Isoophiopogonone and Liquirtigenin having activity against multidrug resistant bacteria.

BACKGROUND: Medicinal plants have been founded as traditional herbal medicine worldwide. Most of the plant's therapeutic properties are due to the presence of secondary metabolites such as alkaloids, glycosides, tannins and volatile oil. METHODS: The present investigation analyzed the High-Pressure Liquid Chromatography (HPLC) fractions of Glycyrrhiza glabra (Aqueous, Chloroform, Ethanol and Hexane) against multidrug resistant human bacterial pathogens (Escherichia coli, Acinetobacter baumannii, Staphylococcus aureus and Pseudomonas aeruginosa). All the fractions showed antibacterial activity, were subjected to LC MS/MS analysis for identification of bioactive compounds. RESULTS: Among total HPLC fractions of G. glabra (n = 20), three HPLC fractions showed potential activity against multidrug resistant (MDR) bacterial isolates. Fraction 1 (F1) of aqueous extracts, showed activity against A. baumannii (15 ± 0.5 mm). F4 from hexane extract of G. glabra showed activity against S. aureus (10 ± 0.2 mm). However, F2 from ethanol extract exhibited activity against S. aureus (10 ± 0.3 mm). These active fractions were further processed by LC MS/MS analysis for the identification of compounds. Ellagic acid was identified in the F1 of aqueous extract while 6-aldehydo-isoophiopogonone was present in F4 of hexane extract. Similarly, Liquirtigenin was identified in F2 of ethanol. CONCLUSIONS: Glycyrrhiza glabra extracts HPLC fractions showed anti-MDR activity. Three bioactive compounds were identified in the study. 6-aldehydo-isoophiopogonone and Liquirtigenin were for the first time reported in G. glabra. Further characterization of the identified compounds will be helpful for possible therapeutic uses against infectious diseases caused by multidrug resistant bacteria.

In vitro studies to evaluate the effect of varying culture conditions and IPL fluencies on tenocyte activities.

Tendons are dense, fibrous connective tissues which carry out the essential physiological role of transmitting mechanical forces from skeletal muscle to bone. From a clinical perspective, tendinopathy is very common, both within the sporting arena and amongst the sedentary population. Studies have shown that light therapy may stimulate tendon healing, and more recently, intense pulsed light (IPL) has attracted attention as a potential treatment modality for tendinopathy; however, its mechanism of action and effect on the tendon cells (tenocytes) is poorly understood. The present study therefore investigates the influence of IPL on an in vitro bovine tendon model. Tenocytes were irradiated with IPL at different devise settings and under variable culture conditions (e.g. utilising cell culture media with or without the pH indicator dye phenol red), and changes in tenocyte viability and migration were subsequently investigated using Alamar blue and scratch assays, respectively. Our data demonstrated that IPL fluencies of up to 15.9 J/cm2 proved harmless to the tenocyte cultures (this was the case using culture media with or without phenol red) and resulted in a significant increase in cell viability under certain culture conditions. Furthermore, IPL treatment of tenocytes did not affect the rate of cell migration. This study demonstrates that irradiation with IPL is not detrimental to the tenocytes and may increase their viability under certain conditions, thus validating our in vitro model. Further studies are required to elucidate the effects of IPL application in the clinical situation.

Punica granatum peel extracts: HPLC fractionation and LC MS analysis to quest compounds having activity against multidrug resistant bacteria.

BACKGROUND: Medicinal plants are rich source of traditional herbal medicine around the globe. Most of the plant's therapeutic properties are due to the presence of secondary bioactive compounds. METHODS: The present study analyzed the High Pressure Liquid Chromatography (HPLC) fractions of Puncia granatum (peel) extracts (aqueous, chloroform, ethanol and hexane) against multidrug resistant bacterial pathogens (Acinetobacter baumannii, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus). All the fractions having antibacterial activity was processed for bioactive compounds identification using LC MS/MS analysis. RESULTS: Among total HPLC fractions (n = 30), 4 HPLC fractions of P. granatum (peel) showed potential activity against MDR pathogens. Fraction 1 (F1) and fraction 4 (F4) collected from aqueous extract showed maximum activity against P. aeruginosa. Fraction 2 (F2) of hexane showed antibacterial activity against three pathogens, while ethanol F4 exhibited antibacterial activity against A. baumannii. The active fractions were processed for LC MS/MS analysis to identify bioactive compounds. Valoneic acid dilactone (aqueous F1 and F4), Hexoside (ethanol F4) and Coumaric acid (hexane F2) were identified as bioactive compounds in HPLC fractions. CONCLUSION: Puncia granatum peel extracts HPLC fractions exhibited potential inhibitory activity against MDR bacterial human pathogens. Several bioactive compounds were identified from the HPLC fractions. Further characterization of these compounds may be helpful to conclude it as therapeutic lead molecules against MDR pathogens.

Heat Transfer in MHD Mixed Convection Flow of a Ferrofluid along a Vertical Channel.

This study investigated heat transfer in magnetohydrodynamic (MHD) mixed convection flow of ferrofluid along a vertical channel. The channel with non-uniform wall temperatures was taken in a vertical direction with transverse magnetic field. Water with nanoparticles of magnetite (Fe3O4) was selected as a conventional base fluid. In addition, non-magnetic (Al2O3) aluminium oxide nanoparticles were also used. Comparison between magnetic and magnetite nanoparticles were also conducted. Fluid motion was originated due to buoyancy force together with applied pressure gradient. The problem was modelled in terms of partial differential equations with physical boundary conditions. Analytical solutions were obtained for velocity and temperature. Graphical results were plotted and discussed. It was found that temperature and velocity of ferrofluids depend strongly on viscosity and thermal conductivity together with magnetic field. The results of the present study when compared concurred with published work.