Simultaneous determination of 11 nootropic substances potentially adulterated in dietary supplements for improving brain function using ultra-performance liquid chromatography and liquid chromatography-quadrupole-time-of-flight mass spectrometry.

Recently, the demand for improved brain function and concentration has increased in the dietary supplement market. However, to artificially enhance their pharmacological efficacy, dietary supplements may be illegally adulterated with unauthorised substances. Therefore, we developed a rapid and accurate method to simultaneously determine 11 nootropic substances using an ultra-high-performance liquid chromatography (UPLC) system equipped with a photodiode array (PDA) detector. In addition, sample preparation procedures were semi-optimised for various types of matrices, including solid (hard capsule, tablet, powder, and pill) and liquid (oil and extract) samples. The method was validated to determine the limit of detection (LOD), limit of quantification (LOQ), method detection limit (MDL), method quantitation limit (MQL), specificity, linearity, precision, accuracy, recovery, stability, and matrix effects. The validation results satisfied international validation guideline requirements. To test the applicability of the method, 55 real samples advertised as effective brain health, memory, and cognition supplements were analysed. Among the real samples, vinpocetine (2.483 and 7.296 µg/g), and kavain (69-44.056 µg/g) were detected. In addition, the detected compounds were confirmed by comparing their fragmentation patterns with those of the reference standards using liquid chromatography-quadrupole-time-of-flight mass spectrometry (LC-QTOF/MS). In conclusion, the UPLC-PDA method not only rapidly and accurately quantifies illegal nootropics but also enables the pre-emptive investigation and identification of 11 nootropic substances in illegal dietary supplements to protect public health.

Intercomparison study of fragmentation pathways and fragment ion structures for screening of illegal drugs and their novel analogues used to adulterate dietary supplements using liquid chromatography/quadrupole time-of-flight mass spectrometry.

RATIONALE: As public interest in health and immunity has increased in recent years, so has the demand for dietary supplements. However, supplements adulterated with illegal drugs and their novel analogues are being sold even as the pharmacological efficacies of these drugs are being advertised. Since the use of these illegal compounds can have serious side effects, they pose a risk to public health. Hence, in this study, we propose a strategy for proactively testing drugs and novel analogues that may be added to dietary supplements illegally. METHODS: The optimal conditions for liquid chromatography/quadrupole time-of-flight mass spectrometry were explored to determine the fragmentation patterns for 60 compounds. The optimal conditions were established by comparing the areas and heights of the precursor ion peaks at a fragmentor voltage of 125 or 175 V. Furthermore, the optimized spectra were acquired using collision energies of 1 to 50 eV. The energy value was selected based on the condition that the mass error of the precursor ions is 10 ppm or lower. RESULTS: The fragmentation pathway of each product ion and its chemical structure were predicted and determined. In addition, the obtained structural information was used to screen 18 seized samples. Based on the precursor ions and the corresponding fragmentation patterns, the unknown compounds present in the samples were identified as desulfonylchlorosildenafil and propoxyphenylthiohydroxy homosildenafil. CONCLUSIONS: We obtained mass spectrometry-based information for various compounds by predicting the fragmentation pathways and chemical structures of their fragment ions. Subsequently, based on the obtained structural information, we tested several seized samples and were able to detect two novel analogues in four of the samples. Therefore, the proposed approach is suitable for quickly and accurately identifying the unknown compounds detected in real-world samples.

Development of a method for simultaneous screening of four natural-derived steroids and their analogues used as dietary supplements via liquid chromatography-quadrupole-time of flight mass spectrometry and liquid chromatography-tandem mass spectrometry.

Natural-derived steroids and their analogues are present in various plants and insects. To minimize the chance of missing a positive doping test and avoiding potentially serious health problems, adequate screening methods are necessary for the detection of a wide range of natural-derived steroids and their analogues in dietary supplements. In this study, an accurate and simple liquid-chromatography-tandem mass spectrometry (LC-MS/MS) method was developed and validated to determine and quantify the natural-derived steroids and their analogues according to the International Conference on Harmonization of technical Requirements for Registration of Pharmaceuticals for Human Use guidelines. The validation results indicating excellent extraction efficiency and low matrix effects show that the LC-MS/MS method is reliable for the detection of natural-derived steroids and their analogues. In addition, we established the ion fragmentation of turkesterone and ion fragmentation of four natural-derived steroids and their analogues. The validated method was applied to 60 dietary supplements purchased online and in person from international vendors in 2020. Ecdysterone and 5α-hydroxylaxogenin were detected respectively in 3 and 14 of 60 dietary supplements. Especially, a high amount of 5α-hydroxylaxogenin, an FDA-unapproved ingredient, was detected in two of dietary supplements (44.4 and 32.3 mg/g). This component should be controlled since it may cause unexpected side effects if administered excessively. Thus, this method will be helpful for the continuous control and supervision of unlicensed dietary supplements containing natural-derived steroids and their analogues.

Application of predicted fragmentation pathways and fragment ion structures for detecting steroids and selective androgen receptor modulators in dietary supplements using liquid chromatography-quadrupole time-of-flight mass spectrometry.

RATIONALE: Dietary supplements advertised to strengthen muscles have earned fame among athletes. However, several products containing unauthorized compounds are often detected, which can cause a public health risk. Particularly, steroids and selective androgen receptor modulators (SARMs) can cause serious side effects as hormone modulators. In this study, we analyzed 15 steroids and 20 SARMs using liquid chromatography-quadrupole time-of-flight mass spectrometry (LC/QTOFMS) to provide fundamental information about fragmentation pathways and fragment ion structures. METHODS: The optimal conditions of LC/QTOFMS were explored to obtain fragmentation patterns for each compound. The optimal conditions were established by comparing the area and height of the precursor ion peak at 125 or 175 V as a fragmentor energy. Furthermore, the optimized spectra were acquired by applying collision energy ranging from 1 to 50 eV. The energy value was selected under the condition that the mass error of precursor ions was less than 10 ppm. RESULTS: The 35 compounds were classified on the basis of their chemical core structures: arylpropionamide (3 compounds), quinolinone (2), pyrrolidinylbenzonitrile (1), indole (2), tropanol (2), phenylaxadaizole (1), hydantoin (2), phenylthiazole (1), nitrothiophene (1) and steroidal derivative (20). Fragmentation pathways and the chemical structure of each product ion were predicted and identified. Furthermore, the obtained structural information was applied to screen seized samples. As a result, 10 seized samples were confirmed to contain one or more SARMs by comparing each precursor ion and fragmentation pattern. CONCLUSIONS: The application to real samples for accurate screening indicated that the same fragmentation patterns and product ions as one or more SARM standards were detected and identified in the seized samples advertised as muscle building. Therefore, this study can contribute to ensuring the safety of public health through providing fundamental information about the risk of illegal adulteration.

Simultaneous screening of 21 potential adulterants in dietary supplements for the treatment of prostate diseases using ultra-performance liquid chromatography and liquid chromatography-electrospray ionization-tandem mass spectrometry.

Reports of the number of adulteration cases using illegal therapeutic substances in dietary supplements have increased. In recent years, various dietary supplements are being distributed that exaggerate the efficacy of treatment for prostate-related diseases. To develop the preemptive monitoring method, we selected 21 prostate-related therapeutic substances and optimized the simultaneous ultra-performance liquid chromatography and liquid chromatography-electrospray ionization-tandem mass spectrometry and pretreatment procedures for various types of matrices including solid, liquid, and soft capsule samples. The methods were validated by determining the specificity, linearity, limit of detection, limit of quantification, method detection limit, method quantitation limit, precision, accuracy, recovery, stability, and matrix effect. The simultaneous methods were validated according to the international guidelines. In addition, using the validated methods, 81 real samples, which were searched and purchased by focusing on promotional phrases, such as prostate and prostatic hyperplasia, were successfully screened. As a result, sildenafil and tadalafil were detected in one seized capsule sample (5.15 and 14.6 mg/g, respectively). Synthetically, our approach could be useful for the determination of illegal therapeutic substances potentially adulterated in various types of dietary supplements.

Development and validation of liquid chromatography-tandem mass spectrometry method for screening six selective androgen receptor modulators in dietary supplements.

Selective androgen receptor modulators (SARMs) are compounds with specific androgenic properties that have been investigated for the treatment of conditions such as muscle wasting disease. The reported androgenic properties have resulted in their use by athletes, and consequently they have been on the World Anti-Doping Agency prohibited list for more than a decade. To minimise the chance of an unattended positive doping test and to avoid potential serious health problems, adequate screening methods for the detection of a wide range of SARMs in these supplements is necessary. In this study, a rapid and accurate liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed and validated simultaneously to screen and quantify six SARMs in dietary supplements, with confirmation by liquid chromatography-quadrupole-time of flight mass spectrometry (LC-Q-TOF/MS). The validated method was applied to 60 dietary supplements obtained by on-line and direct purchase from international vendors in 2020. Various SARMs were detected at high concentrations in 20 products which were advertised as having androgenic properties. For example, andarine was present at 7.2% in one product, and GW501516 was found at 3.49% in the another product. Furthermore, MK-677 and YK-11, not disclosed on the label, were detected in some products. YK-11 is easily hydrolysed in just a few hours. Although YK-11 is particularly unstable, such that the protonated ion [M + H]+ at m/z 431 for YK-11 was not detected, mass fragmentation, and a [M+ Na]+ ion at m/z 453.3 confirmed the presence of YK-11. Additionally, hydrolysed YK-11 under acidic conditions was confirmed by NMR spectral data, and 1H NMR and 13C NMR spectral data for YK-11 were in good agreement with literature data. This rapid and accurate LC-MS/MS method can therefore be successfully applied to screen and identify SARMs for the continuous control and supervision of dietary supplements.

Detection of 94 compounds related to sexual enhancement including sildenafil, tadalafil, vardenafil and their analogues in various formulations of dietary supplements and food samples using HPLC and LC-MS/MS.

With an increase in the detection of structural and functional analogues of phosphodiesterase type 5 inhibitors (PDE-5i) in dietary supplements (DS) and foods, public health is threatened. Some products advertise natural ingredients despite containing PDE-5i that can cause serious adverse effects on human health. To avoid detection during routine screening, novel PDE-5i have been synthesised and added to DS and foods. The purpose of this study was to detect, identify, and quantify 94 PDE-5i and related compounds in DS and foods. Furthermore, the study investigated the detection cases and compared them by sample type, formulation, and compounds. The HPLC and LC-MS/MS methods were validated for limit of detection (LOD), limit of quantification (LOQ), linearity, and recovery in solid and liquid type samples. Both HPLC and LC-MS/MS showed satisfactory results, which were in conformance with the ICH guidelines. A total of 404 samples, including DS (99), and foods (305) were purchased from online and offline markets. Samples divided into 5 types of formulation were analysed; tablet, capsule, pilula (herbal medicine pill), powder and liquid type. Of these 130 samples (47 of 99 DS, and 83 of 305 foods) contained one or more PDE-5i or related compounds. Among the five types of formulation, the tablet type showed the highest detection rate (61.1%) in DS, whereas the capsule type showed the highest detection rate (53.8%) in food samples. This study will be helpful for monitoring illegal ED-related products, providing information to consumers, and ultimately contributing to protecting public health.

Screening for twenty-eight target anabolic-androgenic steroids in protein supplements using QuEChERS extraction followed by liquid chromatography-tandem mass spectrometry.

Anabolic-androgenic steroids (AASs) are very potent muscle builders, and professional sportsmen often take protein supplements to improve their performance. Several studies have emphasised that protein supplements may contain undeclared AASs banned by the International Olympic Committee/World Anti-Doping Agency. The widespread occurrence and abuse of contaminated protein supplements is extremely dangerous because of their side effects. To minimise the chances of an unattended positive doping test or to avoid serious health problems, adequate screening methods for the detection of a wide range of steroids is essential. To address this requirement, a rapid and effective modified QuEChERS (quick, easy, cheap, effective, rugged and safe) method was developed and validated to screen and quantify the simultaneous analysis of twenty-eight AASs in protein supplements using LC-MS/MS. The validated method was applied to 198 protein supplements collected from on-line and, off-line markets, and direct purchase from overseas between 2019 and 2020. Of the 198 samples, two samples contained testosterone and stanozolol at concentrations of 0.27 µg/g and 0.023 µg/g, respectively. In addition, 5α-hydroxylaxogenin was detected for the first time in three products purchased in Korea from overseas. The modified QuEChERS method was established and successfully applied to screen and determine AASs as a measure of continuous control and supervision in protein supplements.

Development and validation of LC-MS/MS method with QuEChERS clean-up for detecting cannabinoids in foods and dietary supplements.

a rapid and simple liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed and validated for the determination of cannabidiol (CBD) and Δ9-tetrahydrocannabinol (THC) using a QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) clean-up for a variety of foods and dietary supplements (DS). QuEChERS is widely used in extraction or clean-up procedures to eliminate interference of matrices such as sugars, organic acids, lipids, and fatty acids. The samples were categorised into three types, and various pretreatment methods were compared for each type. In all types, the QuEChERS was superior and selected as the final pretreatment method. The optimised method was validated for specificity, limit of detection (LOD), limit of quantification (LOQ), linearity, recovery, precision and accuracy. All of the validation results met the requirements of the international guidelines for all types of samples. The validated method was applied to 30 commercial food samples, CBD was detected in 17 samples, with 2 of them detected below the LOQ level and the rest detected in a range of 70 µg/kg to 31305 mg/kg (3.1%, w/w). Meanwhile, THC was detected in 14 samples; 2 of them were detected below the LOQ level and the rest detected in a 0.08-98.62 µg/g range. These results indicated that the validated method can be successfully applied for the determination of cannabinoids in a variety of samples. Furthermore, it will be useful for controlling the illegal distribution of cannabinoids.

Mechanical properties and polymerization shrinkage of composite resins light-cured using two different lasers.

OBJECTIVE: The purpose of the present study was to investigate the usefulness of 457 and 473 nm lasers for the curing of composite resins during the restoration of damaged tooth cavity. BACKGROUND DATA: Monochromaticity and coherence are attractive features of laser compared with most other light sources. Better polymerization of composite resins can be expected. MATERIALS AND METHODS: Eight composite resins were light cured using these two lasers and a light-emitting diode (LED) light-curing unit (LCU). To evaluate the degrees of polymerization achieved, polymerization shrinkage and flexural and compressive properties were measured and compared. RESULTS: Polymerization shrinkage values by 457 and 473 nm laser, and LED ranged from 10.9 to 26.8, from 13.2 to 26.1, and from 11.5 to 26.3 µm, respectively. The values by 457 nm laser was significantly different from those by 473 and LED LCU (p<0.05). However, there was no statistical difference between values by 473 and LED LCU. Before immersion in distilled water, flexural strength (FS) and compressive modulus (CM) of the specimens were inconsistently influenced by LCUs. On the other hand, flexural modulus (FM) and compressive strength (CS) were not significantly different for the three LCUs (p>0.05). For the tested LCUs, no specific LCU could consistently achieve highest strength and modulus from the specimens tested. CONCLUSIONS: Two lasers (457 and 473 nm) can polymerize composite resins to the level that LED LCU can achieve despite inconsistent trends of polymerization shrinkage and flexural and compressive properties of the tested specimens.

A novel antibacterial compound from Siegesbeckia glabrescens.

The crude methanol extract of the dried aerial parts of Siegesbeckia glabrescens (Compositae) showed antibacterial activity against the foodborne pathogen Staphylococcus aureus. Bioactivity-guided separation led to the isolation of 3-(dodecanoyloxy)-2-(isobutyryloxy)-4-methylpentanoic acid from nature for the first time. The structure was determined by spectroscopic data analysis (UV, MS, and NMR). The minimal inhibitory concentration (MIC) of 3-(dodecanoyloxy)-2-(isobutyryloxy)-4-methylpentanoic acid against S. aureus was found to be 3.12 μg/mL. In addition, in a further antimicrobial activity assay against Gram-positive (B. subtilis, E. faecalis, P. acnes, S. epidermidis, S. schleiferi subsp. coagulans, S. agalactiae and S. pyrogens), and Gram-negative bacteria (E. coli and P. aeruginosa), and yeast strains (C. alibicans and F. neoformans), the antimicrobial activity of the compound was found to be specific for Gram-positive bacteria. The MIC values of the compound for Gram-positive bacteria ranged from 3.12 to 25 mg/mL. Furthermore, it was found that the 2-(isobutyryloxy)-4-methylpentanoic acid substituent may operate as a key factor in the antibacterial activity of the compound, together with the laurate group.

Effect of staining solutions on discoloration of resin nanocomposites.

PURPOSE: To examine the effect of staining solutions on the discoloration of resin nanocomposites. METHODS: Three resin nanocomposites (Ceram X, Grandio, and Filtek Z350) were light cured for 40 seconds at a light intensity of 1000 mW/cm2. The color of the specimens was measured in %R (reflectance) mode before and after immersing the specimens in four different test solutions [distilled water (DW), coffee (CF), 50% ethanol (50ET) and brewed green tea (GT)] for 7 hours/day over a 3-week period. The color difference (deltaE*) was obtained based on the CIEL*a*b* color coordinate values. RESULTS: The specimens immersed in DW, 50ET and GT showed a slight increase in L* value. However, the samples immersed in CF showed a decrease in the L* value and an increase in the b* value. CF induced a significant color change (deltaE*: 3.1-5.6) in most specimens but the other solutions induced only a slight color change. Overall, coffee caused unacceptable color changes to the resin nanocomposites.

Acid resistance of erbium-doped yttrium aluminum garnet laser-treated and phosphoric acid-etched enamels.

OBJECTIVE: To compare the effects of erbium-doped yttrium aluminum garnet (Er:YAG) laser ablation and of phosphoric acid etching on the in vitro acid resistance of bovine enamel. MATERIALS AND METHODS: Teeth were polished to make the surface flat. The polished enamel was either etched with 37% phosphoric acid for 30 seconds or ablated with a single 33 J/cm2 pulse from an Er:YAG laser. The control specimens were free from acid etching and laser ablation. Changes in crystal structure, dissolved mineral (calcium [Ca] and phosphorus [P]) contents, and calcium distribution in the enamel subsurface after a pH-cycling process were evaluated. RESULTS: After laser treatment, poor crystal structures improved without forming any new phases, such as tricalcium phosphates. Among the tested enamels, dissolved mineral contents were significantly different (P < .05). Er:YAG laser-treated enamels had the lowest mineral dissolution (Ca, 13.78 ppm; P, 6.33 ppm), whereas phosphoric acid-etched enamels had the highest (Ca, 15.90 ppm; P, 7.33 ppm). The reduction rate and reduced depth of calcium content along the subsurface were lowest in Er:YAG laser-treated enamels. CONCLUSION: The Er:YAG laser-treated enamels are more acid resistant to acid attack than phosphoric acid-etched enamels.

Nd:YAG laser ablation and acid resistance of enamel.

The acid resistance of Nd:YAG laser-ablated enamel surfaces was studied by evaluating crystal structure, mineral distribution, and fluorescence radiance and image in the present study. For comparison, 37% phosphoric acid etching was performed. The formation of beta-tricalcium phosphate (beta-TCP) was confirmed in the laser-ablated surface. The Ca/P ratio increased after ablation due to mineral re-distribution. In contrast, the Ca/P ratio decreased after acid etching due to mineral loss. The laser-ablated enamels showed a smaller increase of fluorescence radiances and less clear laser confocal scanning microscope images than those observed in the acid-etched enamels. The former suggests a minimized mineral loss. The Nd:YAG laser irradiation will enhance the acid resistance and retard the carious progression in enamel.