Multivariate Statistical Optimization of Tablet Formulations Incorporating High Doses of a Dry Herbal Extract.

The development of oral tablet formulation for herbal medicines has been restricted by large drug loadings and the poor physicochemical and mechanical properties of dry herbal extracts (DHEs). Herein, statistical experimental designs were applied to herbal tablet formulation development and optimization using Wuzi Yanzong dry extract (WYE). The tablet disintegration time and hardness were identified as the critical quality attributes (CQAs) of the product. The tablet formulation was designed to achieve a high drug loading (50% or higher of WYE), shorter tablet disintegration time (less than 30 minutes), and suitable hardness (6.0 to 7.5 kp). A D-optimal mixture design was used to evaluate the effects of excipients on CQAs to minimize the risk compression failure and improve the tabletability in formulations containing WYE at 50% and 65% by weight. A partial least squares model was used to elucidate the multivariate relationships between a large number of formulation variables and product CQAs, and determine the maximum possible WYE loading. From overlaid plots of the effects of formulation variables on CQAs, it was found that a maximum WYE loading of 67% in tablet formulation satisfied the acceptance criteria of CQAs. In conclusion, this study shows that multivariate statistical tools are useful for developing tablet formulations containing high doses of herbal extracts and establishing control strategies that ensure product quality.

Design of fixed dose combination and physicochemical characterization of enteric-coated bilayer tablet with circadian rhythmic variations containing telmisartan and pravastatin sodium.

The aim of this study was to investigate a fixed dose combination (FDC) of telmisartan (TEL) and pravastatin sodium (PRA) in enteric-coated bilayer tablets, which was designed for once-daily bedtime dose in order to match circadian rhythmic variations of hypertension and cholesterol synthesis and optimize the patient friendly dosing treatment. Due to the poor aqueous solubility of TEL, ternary solid dispersions (SD) consisting of TEL, polyethylene glycol 6000 (PEG 6000) and magnesium oxide (MgO) were designed to enhance its dissolution rate in intestinal fluid. MgO was added as an effective alkalizer to maintain the high microenvironmental pH of the saturated solution in the immediate vicinity of TEL particles because TEL is known to be ionizable but poorly soluble in intestinal fluid. In contrast, PRA is known to be very unstable in low pH conditions. In the SD system, TEL was present in an amorphous structure and formed an intermolecular hydrogen bonding with MgO, giving complete drug release without precipitation in intestinal fluid. In addition, the amount of hydrophilic carrier (PEG 6000) was also a factor. In the design of tablet formulation, the diluents and superdisintegrants could play a key role in release profiles. Then, to fulfill the unmet needs of the two model drugs and match circadian rhythmic variations of hypertension and cholesterol synthesis, enteric-coated bilayer tablet consisting of TEL SD and PRA was finally prepared using Acryl-EZE® as an enteric coating material. Prior to enteric coating, a seal coating layer (Opadry®, 2% weight gains) was firstly introduced to separate the core bilayer tablet from the acidic enteric coating polymers to avoid premature degradation. Dissolution profiles of finished tablets revealed that enteric-coated bilayer tablets with 6% weight gains remained intact in acidic media (pH 1.0) for 2h and then released drugs completely within 45min after switching to the intestinal media (pH 6.8). It was observed that enteric-coated bilayer tablets were stable during 3 month under the accelerated condition of 40°C/75% RH. The delayed drug release and bedtime dosage regimen using enteric-coated bilayer tablet containing TEL and PRA, matching the circadian rhythms of hypertension and hyperlipidemia can provide therapeutic benefits for elderly patients in terms of maximizing the therapeutic effects.

Biodistribution and pharmacokinetics in rats and antitumor effect in various types of tumor-bearing mice of novel self-assembled gelatin-oleic acid nanoparticles containing paclitaxel.

The aim of this study was to investigate the pharmacokinetics and biodistribution in Sprague-Dawley rats, anti-tumor activity and acute toxicity in different tumor-bearing mice of novel biocompatible nanoparticles. Paclitaxel (PTX) was selected as a model drug and loaded on different tumor types and at various doses. The nanoparticles were prepared using a newly synthesized gelatin-oleic acid conjugate via self-assembly in an aqueous solution. The nanoparticles were further functionalized using folic acid (FA) as a targeting ligand for cancer. The in vivo effects of the nanoparticles were compared with the commercially available Taxol (a solution form of PTX) as a reference dosage form. The in vivo studies confirmed that nanoparticles showed improved therapeutic effects on tumors and significantly reduced the toxic effects associated with Taxol, even at the 50% lethal dose (LD50). The in vivo pharmacokinetic parameters and biodistribution of the nanoparticles containing PTX also indicated slower clearance, longer blood circulation and higher tumor selectivity. Furthermore, the functionalized nanoparticles with FA were more effective than the non-functionalized nanoparticles. Thus, the suitable properties of gelatin-oleic nanoparticles (GON) as a drug carrier and the effective targeting ligand could synergistically maximize the in vivo anti-tumor efficacy resulting in delayed tumor volume growth and hence, providing versatile strategies in cancer therapy and drug delivery.

Pharmacokinetics of puerarin in pregnant rats at different stages of gestation after oral administration.

This study aims to observe the effects of gestational stage on the pharmacokinetics of puerarin after oral administration in rats. The pharmacokinetics of puerarin was studied in pregnant rats using a sensitive and reproducible high-performance liquid chromatography/ultraviolet method. The concentration-time curves in both normal and pregnant rats were fit into a two-compartment model. The results indicated that gestation influences the pharmacokinetics of puerarin at different levels, especially during the early stages of pregnancy. Furthermore, puerarin penetrates the placental barrier and maintains high concentrations in fetal rat plasma. Therefore, puerarin administration should be carefully considered in pregnant women.

Provisional biopharmaceutical classification of some common herbs used in Western medicine.

The aim of this study was to classify some markers of common herbs used in Western medicine according to the Biopharmaceutical Classification System (BCS). The BCS is a scientific approach to classify drug substances based upon their intestinal permeability and their solubility, at the highest single dose used, within the physiologically relevant pH ranges. Known marker components of twelve herbs were chosen from the USP Dietary Supplement Compendium Monographs. Different BCS parameters such as intestinal permeability (P(eff)) and solubility (C(s)) were predicted using the ADMET Predictor, which is a software program to estimate biopharmaceutical relevant molecular descriptors. The dose number (D0) was calculated when information from the literature was available to identify an upper dose for individual markers. In these cases the herbs were classified according to the traditional BCS parameters using P(eff) and D0. When no upper dose could be determined, then the amount of a marker that is just soluble in 250 mL of water was calculated. This value, M(x), defines when a marker is changing from highly soluble to poorly soluble according to BCS criteria. This biopharmaceutically relevant value can be a useful tool for marker selection. The present study showed that a provisional BCS classification of herbs is possible but some special considerations need to be included into the classification strategy. The BCS classification can be used to choose appropriate quality control tests for products containing these markers. A provisional BCS classification of twelve common herbs and their 35 marker compounds is presented.

Enhanced dissolution and bioavailability of biochanin A via the preparation of solid dispersion: in vitro and in vivo evaluation.

The present study aimed to improve the bioavailability of biochanin A, a poorly soluble bioflavonoid, via the preparation of solid dispersion (SD) using Solutol HS15 and HPMC 2910. Solubility of biochanin A was enhanced by 8-60 folds as the drug-carrier ratio was increased in SDs. Furthermore, compared to pure biochanin A or physical mixture (PM), SDs significantly improved the dissolution rate and the extent of drug release. Particularly, SDs (Drug:Solutol HS15:HPMC 2910=1:5:5 or 1:10:10) achieved the rapid and complete drug release (approximately 100% within 1h) at pH 6.8. The XRD patterns indicated that SDs might enhance the solubility of biochanin A by changing the drug crystallinity to amorphous state in addition to the solubilizing effect of hydrophilic carriers. The improved dissolution of biochanin A via SD formulation appeared to be well correlated with the enhanced oral exposure of biochanin A in rats. After an oral administration of SD (Drug:Solutol HS15:HPMC 2910=1:10:10), C(max) and AUC of biochanin A were increased by approximately 13 and 5 folds, respectively, implying that SDs could be effective to improve the bioavailability of biochanin A. In conclusion, solid dispersion with Solutol HS15 and HPMC 2910 appeared to be promising to improve the dissolution and oral exposure of biochanin A.

On-off pulsed oral drug-delivery systems: a possible tool for drug delivery in chronotherapy.

Circadian rhythms regulate most body functions and are important factors to consider when administering drugs. The existence of circadian rhythms in nature and their influences on human biological systems have given rise to the concept of chronotherapy, which is the science of delivering drugs in a synchronized manner with the rhythm-dependent circadian variation inherent in the human body. The safety and efficacy of a drug can be improved by matching the peak plasma concentration during a 24 h period of the rhythms. An on-off pulsed (pulsatile or time-controlled) release drug-delivery system offers rapid and transient release; stepwise release; and the sustained release of a certain amount of drug within a short time period after a predetermined off-release period according to the circadian rhythm of disease states. These systems deliver the drug at the right time and at an appropriate dosage and are the best approach for chronotherapy. These systems show promise for the optimal therapy of chronic diseases such as asthma, hypertension, myocardial infarction and arthritis, which show a circadian dependency. Various technologies have been adopted to mimic circadian rhythms in physiological functions and diseases. This review focuses on the basic concept of circadian rhythm, chronotherapy and recent advances in the development of on-off pulsed oral drug-delivery systems for optimal therapy.

Effect of maceligan on the systemic exposure of paclitaxel: in vitro and in vivo evaluation.

This study investigated the effect of macelignan on the P-glycoprotein-mediated drug efflux as well as CYP3A4-mediated drug metabolism and subsequently its in vivo implication on the bioavailability of paclitaxel. The inhibition effect of macelignan on the CYP3A4-mediated metabolism was negligible over the concentration range of 0.01-100muM in rat liver microsome while approximately 33% inhibition was observed at 100muM in human liver microsome, implying that the interaction of macelignan with CYP3A4 might be insignificant at the physiologically achievable concentrations. In contrast, macelignan (20muM) increased the cellular accumulation of paclitaxel by approximately 1.7-fold in NCI/ADR-RES cells overexpressing P-gp, while it did not alter the cellular accumulation of paclitaxel in OVCAR-8 cells lacking P-gp. The effect of macelignan on the systemic exposure of paclitaxel was also examined in rats after the intravenous and oral administration of paclitaxel in the presence and the absence of macelignan. The concurrent use of macelignan significantly (p<0.05) enhanced the oral exposure of paclitaxel in rats while it did not affect the intravenous pharmacokinetics of paclitaxel, implying that macelignan might be more effective to improve the intestinal absorption rather than reducing hepatic elimination. In conclusion, macelignan appeared to be effective to improve the cellular accumulation as well as oral exposure of paclitaxel mainly via the inhibition of P-gp-mediated cellular efflux, suggesting that the concomitant use of macelignan may provide a therapeutic benefit in improving the anticancer efficacy of paclitaxel.

Rumen bypass and biodistribution of l-carnitine from dual-layered coated pellets in cows, in vitro and in vivo.

A ruman bypass delivery system was investigated to improve the delivery efficiency of L-carnitine in biological samples of cows. Highly water-soluble L-carnitine used for dietary supplement in ruminants was chosen. L-Carnitine-loaded compact pellets were prepared by extrusion method and then coated with various coating materials such as ethylcellulose (EC), Eudragit E100 (E100), Eudragit RS100 (RS100), stearyl alcohol and glyceryl monostearate, for single-layered coated pellets (SCP). Two types of dual-layered coated pellets (DCP) were also designed as DCP-A (inner E100/outer EC) or DCP-B (inner EC/outer E100). Preparation of compact pellet and methods of polymeric coatings are the most important strategies for modulated release and rumen bypass efficiency based on chewing behaviors and physiology of veterinary species. DCPs were more efficient in retarding L-carnitine release in rumen fluid (pH 6.8) than the SCP but DCP-B gave much faster release in abomasums fluid (pH 1.2). Both DCP-A and DCP-B showed high in vivo rumen bypass efficiency in cows compared with the nonprotected preparation and most of l-carnitine was readily absorbed. DCP-B was also efficient for delivering L-carnitine in biological samples of cows, mainly in muscle but no statistical differences were observed among the tested preparations after the multiple oral feeding to cows for 3 months. Interestingly, DCP-B produced higher L-carnitine levels in milk in a dose-dependent manner. However, delivery efficiency of L-carnitine preparations in biological samples of cows would rather be more dependent on feeding schedules.

Characterization of itraconazole semisolid dosage forms prepared by hot melt technique.

The objective of this study was to formulate itraconazole semisolid dosage forms and characterize their physicochemical properties. Itraconazole and excipients such as polysorbate 80, fatty acids, fatty alcohols, oils and organic acids were melted at 160 degrees C. The fused solution was then cooled immediately at -10 degrees C to make wax-like semisolid preparations. Their physicochemical attributes were first characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectrometry. The solubility of itraconazole in semisolid preparations and their dispersability in the simulated gastric fluid were also determined. Our semisolid preparations did not show any distinct endothermic peak of a crystalline form of itraconazole around 160-163 degrees C. This suggested that it was changed into amorphous one, when it was formulated into semisolid preparations. In addition, the distinctive functional peaks and chemical shifts of itraconazole were well retained after processing into semisolid preparations. It could be inferred from the data that itraconazole was stable during incorporation into semisolid preparations by the hot melt technique. In particular, itraconazole semisolid preparations composed of polysorbate 80, fatty acids and organic acids showed good solubility and dissolution when dispersed in an aqueous medium. It was anticipated that the semisolid dosage forms would be industrially applicable to improving the bioavailability of poorly water-soluble drugs.

Release behavior and photo-image of nifedipine tablet coated with high viscosity grade hydroxypropylmethylcellulose: effect of coating conditions.

An orally applicable nifedipine-loaded core tablets was coated using high viscosity grade HPMC (100,000 cps) in ethanol/water cosolvent. The release of coated tablet was evaluated using USP paddle method in 900 ml of simulated gastric fluid (pH 1.2) for 2 h followed by intestinal fluid (pH 6.8) for 10 h. The surface morphologies using scanning electron microscope and photo-images using digital camera of coated tablet during the release test were also visualized, respectively. The viscosity of hydro-alcoholic HPMC solution largely decreased as the amount of ethanol increased. There was no significant difference in viscosity among plasticizers used. The distinct and continuous coated layer was observed using scanning electron microscope. However, the surface morphologies were highly dependent on HPMC concentration and ratio of coating solvents. The higher ratio of ethanol/water gave a longer lag time prior to drug release. Lag time also increased as a function of the coating levels based on weight gains due to increased thickness of coated layer. Lag time is inversely correlated with HPMC concentration in ethanol/water (5:1) cosolvent. As the HPMC concentration slightly decreased from 3.8 to 3.2% in hydroalcoholic coating solution, a large increase of lag time was observed. As the swelling (mixing) time of high viscosity grade HPMC in ethanol/water cosolvent increased from 1 to 5 h, the release rate was decreased due to enough plasticization of polymer. Based on photo-imaging analysis, the coated tablet was initially swelled and gelled without erosion and disintegration over 5 h. The disintegration of the coated tablet was occurred approximately 7 h after dissolution, resulting in pulsed release of drug. The high viscosity grade HPMC can be applicable for polymeric coating after careful selection of solvent systems. The release behavior and lag time could be controlled by coating conditions such as HPMC concentration, ethanol/water ratio as a coating solvent, coating level and swelling (mixing) time of coating solution. The current time-controlled release tablet coated with high viscosity grade HPMC with a designated lag time followed by a rapid release may provide an alternative to site specific or colonic delivery of drugs. In addition, the release behavior can be matched with body's circadian rhythm pattern in chronotherapy.

Encapsulated Bifidobacterium bifidum potentiates intestinal IgA production.

We asked whether Bifidobacterium bifidum regulates the synthesis of IgA by mucosal lymphoid cells. B. bifidum alone, but not Clostridium perfringens, significantly induced total IgA and IgM synthesis by both mesenteric lymph nodes (MLN) and Peyer's patch (PP) cells. We, further, investigated the mucosal antibody production following peroral administration of B. bifidum to mice. Ingested B. bifidum significantly increased the number of Ig (IgM, IgG, and IgA) secreting cells in the culture of both MLN and spleen cells. Nonetheless, B. bifidum itself does not induce the own specific antibody responses, implying that B. bifidum does not provoke unnecessary immune reaction. Subsequently, it was found that encapsulation of B. bifidum further augments the total IgA production in the culture of both MLN and spleen cells. Finally, we found that the immuno-stimulating activity of B. bifidum is due to its cellular components but not due to any actively secreting component(s) from bacteria.