Effect of copper, arsenic and nickel on pyrite-based autotrophic denitrification.

Pyritic minerals generally occur in nature together with other trace metals as impurities, that can be released during the ore oxidation. To investigate the role of such impurities, the presence of copper (Cu(II)), arsenic (As(III)) and nickel (Ni(II)) during pyrite mediated autotrophic denitrification has been explored in this study at 30 °C with a specialized microbial community of denitrifiers as inoculum. The three metal(loid)s were supplemented at an initial concentration of 2, 5, and 7.5 ppm and only Cu(II) had an inhibitory effect on the autotrophic denitrification. The presence of As(III) and Ni(II) enhanced the nitrate removal efficiency with autotrophic denitrification rates between 3.3 [7.5 ppm As(III)] and 1.6 [7.5 ppm Ni(II)] times faster than the experiment without any metal(loid) supplementation. The Cu(II) batches, instead, decreased the denitrification kinetics with 16, 40 and 28% compared to the no-metal(loid) control for the 2, 5 and 7.5 ppm incubations, respectively. The kinetic study revealed that autotrophic denitrification with pyrite as electron donor, also with Cu(II) and Ni(II) additions, fits better a zero-order model, while the As(III) incubation followed first-order kinetic. The investigation of the extracellular polymeric substances content and composition showed more abundance of proteins, fulvic and humic acids in the metal(loid) exposed biomass.

Influence of pH, Heat Treatment of Inoculum, and Selenium Oxyanions on Concomitant Selenium Bioremediation and Volatile Fatty Acid Production from Food Waste.

Developing novel strategies to enhance volatile fatty acid (VFA) yield from abundant waste resources is imperative to improve the competitiveness of biobased VFAs over petrochemical-based VFAs. This study hypothesized to improve the VFA yield from food waste via three strategies, viz., pH adjustment (5 and 10), supplementation of selenium (Se) oxyanions, and heat treatment of the inoculum (at 85 °C for 1 h). The highest VFA yield of 0.516 g COD/g VS was achieved at alkaline pH, which was 45% higher than the maximum VFA production at acidic pH. Heat treatment resulted in VFA accumulation after day 10 upon alkaline pretreatment. Se oxyanions acted as chemical inhibitors to improve the VFA yield at pH 10 with non-heat-treated inoculum (NHT). Acetic and propionic acid production was dominant at alkaline pH (NHT); however, the VFA composition diversified under the other tested conditions. More than 95% Se removal was achieved on day 1 under all the conditions tested. However, the heat treatment was detrimental for selenate reduction, with less than 15% Se removal after 20 days. Biosynthesized Se nanoparticles were confirmed by transmission and scanning electron microscopy and and energy dispersive X-ray analyses. The heat treatment inhibited the presence of nonsporulating bacteria and methanogenic archaea (Methanobacteriaceae). High-throughput sequencing also revealed higher relative abundances of the bacterial families (such as Clostridiaceae, Bacteroidaceae, and Prevotellaceae) that are capable of VFA production and/or selenium reduction.

Integrated bioprocess for Se(VI) remediation using duckweed: Coupling selenate removal to biogas production.

The use of phytoremediation as a method for wastewater treatment or removal of pollutants is garnering significant interest and duckweed (DW), a free floating macrophyte, depicts significant potential for the removal of nutrients and toxic compounds from contaminated waters. The present work aimed to develop an integrated process for remediating selenate (Se(VI)) using DW biomass and subsequent use of Se(VI) enriched DW for biogas production. The main objective is to extend the application of selenium (Se) enriched DW biomass for biogas production. Se(VI) enriched DW biomass (Se-DW) gave higher methane production (48.38 ± 3.6 mL gCOD-1) than control DW biomass (C-DW) (24.46 ± 3.6 mL gCOD-1). To further enhance methane production, three pre-treatment approaches (acid, alkali and hydrothermal) were assessed and the solid and liquid fractions obtained after pre-treatment were used as a substrate. Pre-treatments increased biogas production in both Se-DW and C-DW than untreated conditions. Liquid fractions gave higher biogas production than solid fractions. In Se-DW, highest biogas production was observed in hydrothermal pre-treated Se-DW, while in C-DW, acid pre-treatment gave higher biogas production. Methane production was shown to be enhanced up to a Se(VI) concentration of 1.7 mg L-1, whereas a concentration beyond this lowered biogas production.

Assessment of selenium and zinc enriched sludge and duckweed as slow-release micronutrient biofertilizers for Phaseolus vulgaris growth.

Selenium (Se) and zinc (Zn) are essential micronutrients that are often lacking in the diet of humans and animals. Application of mineral Se and Zn fertilizers into soils may lead to a waste of Se and Zn due to the fast leaching and low utilization by plants. Slow-release Se and Zn biofertilizer may therefore be beneficial. This study aims to assess the potential of SeZn-enriched duckweed and sludge produced from wastewater as slow-release Se and Zn biofertilizers. Pot experiments with green beans (Phaseolus vulgaris) and sampling of Rhizon soil pore water were conducted to evaluate the bioavailability of Se and Zn in sandy and loamy soils mixed with SeZn-enriched duckweed and sludge. Both the Se and Zn concentrations in the soil pore water increased upon amending the two biomaterials. The concentration of Se released from SeZn-enriched duckweed rapidly decreased in the first 21 days and slowly declined afterwards, while it remained stable during the entire experiment upon application of SeZn-enriched sludge. The Zn content in the soil pore water gradually increased over time. The application of SeZn-enriched duckweed and sludge significantly increased the Se concentrations in plant tissues, in particular in the form of organic Se-methionine in seeds, without a negative impact on plant growth when an appropriate dose was applied (1 mg Se/kg soil). While, it did not increase Zn concentrations in plant seeds. The results indicate that the SeZn-enriched duckweed and sludge could be only used as organic Se biofertilizers for Se-deficient soils. Particularly, the SeZn-enriched sludge dominated with elemental nano-Se was an effective Se source and slow-release Se biofertilizer. These results could offer a theoretical reference to choose an alternative to chemical Se fertilizers for biofortification, avoiding the problem of Se losses by leaching from mineral Se fertilizers while recovering resources from wastewater. This could contribute to the driver for a future circular economy.

Selenium recovery from wastewater by the green microalgae Chlorella vulgaris and Scenedesmus sp.

Selenium (Se) is an important element for many living organisms and its supplementation may be needed in food, feed, and soil to make up for its deficiency. At the same time, high selenium concentrations can harm the environment, thus its management in sewage and the study of its removal from waste streams are important. Microalgae-based systems may be used for wastewater treatment and nutrients recovery, while producing biomass for bioproducts or bioenergy. In this study, Chlorella vulgaris and Scenedesmus sp. grown in urban wastewater with different selenium concentrations (50-1000 µg Se/L) were evaluated for their resistance and selenium removal/recovery efficiency. Chlorella vulgaris and Scenedesmus sp. were able to remove up to 43 and 52 % of Se from wastewater, respectively. Chlorella vulgaris accumulated up to 323 mgSe/kg DW (in urban wastewater with 1000 µg Se/L). The Se-rich biomass produced may be applied to the supplementation of animal feed or used for biofortification of crops.

Biological selenate and selenite reduction by waste activated sludge using hydrogen as electron donor.

Biological reduction of selenium oxyanions is widely used for selenium removal from wastewater. The process is, however, limited by the availability of a suitable, efficient and low cost electron donor. In this study, selenite and selenate reduction by waste activated sludge using hydrogen as the electron donor was investigated. Both selenite and selenate (80 mg/L) were completely removed using H2 within 8 days of incubation. In the presence of sulfate in the medium, the Se removal efficiency decreased to 77.8-95.4% (for selenite) and 88.2-99.4% (for selenate) at different temperatures and initial sulfate concentrations. Thermophilic conditions (50 °C) were better suited for both selenite and selenate reduction using H2 as electron donor with a 0.8-13.5% increase in overall Se removal. Similarly, sulfate reduction also increased from 69.1- 88% at 30 °C to 72-94.6% at 50 °C. Most of the H2 utilized was diverted towards Se and sulfate reduction with minimal production of byproducts such as methane (<0.32 mM) or volatile fatty acids (<0.92 mg/L). The elemental Se produced from selenite and selenate reduction ranged between 33.9 and 52.1 mg/L. The elemental selenium nanoparticles produced as a result of selenite and selenate reduction were characterized using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX) and dynamic light scattering (DLS) spectroscopy. Furthermore, characterization of the biomass using Fourier-transform infrared spectroscopy (FTIR) and excitation emission matrix (EEM) spectra of the extracellular polymeric substances (EPS) produced by the waste activated sludge were performed to elucidate the mechanism of selenium oxyanion reduction to elemental selenium nanoparticles.

Simultaneous removal of lead and selenium through biomineralization as lead selenide by anaerobic granular sludge.

This study demonstrated the simultaneous removal of lead (Pb) and selenium (Se) as lead selenide biomineralization using anaerobic granular sludge. The microbial community of the granular sludge was first enriched for 140 days in the presence of Pb(II) only, selenate and selenite only, Pb(II)+selenate, and Pb(II)+selenite. In the absence of Se, removal of Pb(II) mainly occurred via biosorption and deposited on the biomass as lead oxide and lead carbonate. The Pb removal efficiency (94% of initial 50 mg L-1) was reduced to 90% and 86% in the presence of selenate and selenite, respectively, due to biosorption. Addition of Pb(II) didn't exert any toxic effect on the Se-reducing microbial community, on the contrary: Pb(II) addition improved the Se removal efficiency for selenate from 85% to 90%, but did not affect selenite removal after 14 d of incubation. The bioreduction of the Se-oxyanions produced elemental Se (Se(0)) and selenide, which later interacted with Pb(II) to produce lead selenide (PbSe). Adsorption of Pb(II) onto the Se(0) nanoparticles and precipitation as the Se(0)-Pb complex might also have contributed to the simultaneous removal of Pb and Se. XPS and XRD analysis further confirmed the immobilization of Pb as PbSe, PbO and PbCO3 in the biomass.

Valorization of selenium-enriched sludge and duckweed generated from wastewater as micronutrient biofertilizer.

Selenium (Se) is an essential trace element for humans and animals with a narrow window between deficiency and toxicity levels. Application of conventional chemical Se fertilizers to increase the Se content of crops in Se deficient areas could result in environmental contamination due to the fast leaching of inorganic Se. Slow-release Se-enriched biofertilizers produced from wastewater treatment may therefore be beneficial. In this study, the potential of Se-enriched biomaterials (sludge and duckweed) as slow-release Se biofertilizers was evaluated through pot experiments with and without planted green beans (Phaseolus vulgaris). The Se concentration in the bean tissues was 1.1-3.1 times higher when soils were amended with Se-enriched sludge as compared to Se-enriched duckweed. The results proved that the Se released from Se-enriched biomaterials was efficiently transformed to health-beneficial selenoamino acids (e.g., Se-methionine, 76-89%) after being taken up by beans. The Se-enriched sludge, containing mainly elemental Se, is considered as the preferred slow-release Se biofertilizer and an effective Se source to produce Se-enriched crops for Se-deficient populations, as shown by the higher Se bioavailability and lower organic carbon content. This study could offer a theoretical reference to choose an environmental-friendly and sustainable alternative to conventional mineral Se fertilizers for biofortification, avoiding the problem of Se losses by leaching from chemical Se fertilizers while recovering resources from wastewater. This could contribute to the driver for a future circular economy.

Production of selenium-enriched microalgae as potential feed supplement in high-rate algae ponds treating domestic wastewater.

This study assessed the selenium (Se) removal efficiency of two pilot-scale high-rate algae ponds (HRAPs) treating domestic wastewater and investigated the production of Se-enriched microalgae as potential feed supplement. The HRAP-Se had an average Se, NH4+-N, total phosphorus and COD removal efficiency of, respectively, 43%, 93%, 77%, and 70%. Inorganic Se taken up by the microalgae was mainly (91%) transformed to selenoamino acids, and 49-63% of Se in the Se-enriched microalgae was bioaccessible for animals. The crude protein content (48%) of the microalgae was higher than that of soybeans, whereas the essential amino acid content was comparable. Selenium may induce the production of the polyunsaturated fatty acids omega-3 and omega-6 in microalgae. Overall, the production of Se-enriched microalgae in HRAPs may offer a promising alternative for upgrading low-value resources into high-value feed supplements, supporting the drive to a circular economy.

Effect of voltage intensity on the nutrient removal performance and microbial community in the iron electrolysis-integrated aerobic granular sludge system.

The effects of voltage intensity on the nutrient removal performance and microbial community in the iron electrolysis-integrated aerobic granular sludge (AGS) system were investigated over a period of 15 weeks. Results revealed that the application outcomes of iron electrolysis for AGS systems relied on voltage intensity. When a constant voltage of 1.5 V was applied, the sludge granulation was most obviously accelerated with a specific growth rate of the sludge diameter of 0.078 day-1, and the removal efficiencies of total nitrogen (TN) and total phosphorus (TP) increased by 14.1% and 20.2%, respectively, compared to the control reactor (without the iron electrolysis-integration). Moreover, the AGS developed at different voltages included different microbial communities, whose shifts were driven by the Fe content and the average diameter of AGS. Both heterotrophic nitrifiers and mixotrophic denitrifiers were significantly enriched in the AGS developed at 1.5 V, which effectively enhanced TN removal. Together with the response of the functional genes involved in Fe, N, and P metabolism, the electrolytic iron-driven nutrient degradation pathway was further elaborated. Overall, this study clarified the optimum voltage condition when iron electrolysis was integrated into the AGS system, and revealed the enhancement mechanism of this coupling technology on nutrient removal during the treatment of low-strength municipal wastewater.

Selenate and selenite uptake, accumulation and toxicity in Lemna minuta.

The kinetics of Se uptake and toxicity to Lemna were studied over a period of 14 days of exposure to Se(IV) or Se(VI). The growth of Lemna stopped immediately after exposure to 5.0 mg/L of Se(IV) or Se(VI). The content of chlorophyll and phaeopigments of Lemna exposed to 5.0 mg/L of Se(IV) was two to three times less than in the control after 3 d exposure. Lemna took up Se rapidly within the first 3 d. The Se content in Lemna along with the exposure time fitted well the two-compartment and the hyperbolic model, which demonstrates that the mechanism of Se(IV) and Se(VI) uptake in Lemna is not only through passive diffusion, but also through other processes such as ion channel proteins or transporters. The kinetic bioconcentration factors (BCFs) were 231 and 42 for 0.5 mg/L Se(IV) and Se(VI) exposure, respectively. The uptake rate of Lemna reached 263 mg/kg/d and 28 mg/kg/d in the Se(IV) and Se(VI) treatments, respectively. This study showed that Se(IV) has a faster accumulation rate than Se(VI), but a higher toxicity, indicating Lemna could be a good candidate to remove Se(IV) from water, producing Se-enriched biomass which may eventually also be considered for use as Se-enriched feed supplement or fertilizer.

Effect of tungsten and selenium on C1 gas bioconversion by an enriched anaerobic sludge and microbial community analysis.

The effect of trace metals, namely tungsten and selenium, on the production of acids and alcohols through gas fermentation by a CO-enriched anaerobic sludge in a continuous gas-fed bioreactor was investigated. The CO-enriched sludge was first supplied with a tungsten-deficient medium (containing selenium) and in a next assay, a selenium-deficient medium (containing tungsten) was fed to the bioreactor, at a CO gas flow rate of 10 mL/min. In the absence of tungsten (tungstate), an initial pH of 6.2 followed by a pH decrease to 4.9 yielded 7.34 g/L acetic acid as the major acid during the high pH period. Subsequently, bioconversion of the acids at a lower pH of 4.9 yielded only 1.85 g/L ethanol and 1.2 g/L butanol in the absence of tungsten (tungstate). A similar follow up assay in the same bioreactor with two consecutive periods at different pH values (i.e., 6.2 and 4.9) with a selenium deficient medium yielded 6.6 g/L acetic acid at pH 6.2 and 4 g/L ethanol as well as 1.88 g/L butanol at pH 4.9. The results from the microbial community analysis showed that the only known CO fixing microorganism able to produce alcohols detected in the bioreactor was Clostridium autoethanogenum, both in the tungsten and the selenium deprived media, although that species has so far not been reported to be able to produce butanol. No other solventogenic acetogen was detected.

Production of selenium- and zinc-enriched Lemna and Azolla as potential micronutrient-enriched bioproducts.

Selenium (Se) and zinc (Zn) are essential micronutrients that are often lacking in the diet of humans and animals, leading to deficiency diseases. Lemna and Azolla are two aquatic plants with a substantial protein content, which offer the possibility of utilizing them to remove Se and Zn from (waste)water while producing micronutrient-enriched dietary proteins and fertilizers. In this study, we explored interaction effects occurring between Se and Zn when these micronutrients are taken up by Azolla and Lemna. The two aquatic plants were grown on hydroponic cultures containing 0-5.0 mg/L of Se (Se(IV) or Se(VI)) and Zn. The Se and Zn content of the plants, growth indicators, bioconcentration factor (BCF) and Se/Zn removal efficiency from the water phase were evaluated. The results demonstrated that Se(IV) is more toxic than Se(VI) for both plant species, as evidenced by the remarkable decrease of biomass content and root length when exposed to Se(IV). Both aquatic plants took up around 10 times more Se(IV) than Se(VI) from the medium. Moreover, the Se accumulation and removal efficiency increased by 66-99% for Se(IV) and by 34-59% for Se(VI) in Lemna when increasing Zn dosage from 0 to 5.0 mg/L in the medium, whereas it declined by 13-26% for Se(IV) and 21-35% for Se(VI) in Azolla, suggesting a synergetic effect in Lemna, but an antagonistic effect in Azolla. The maximum BCF of Se in Lemna and Azolla were 507 and 667, respectively. The protein content in freeze-dried Lemna and Azolla was approximately 17%. The high tolerance and accumulation of Se and Zn in Lemna and Azolla, combined with their rapid growth, high protein content and transformation of inorganic to organic Se species upon Se(IV) exposure make Lemna and Azolla potential candidates for the production of Se(IV)- and Zn-enriched biomass that can be used as crop fertilizers or protein-rich food/feed supplements or ingredients. Accordingly, by growing the Azolla and Lemna on wastewater, a high-value product can be produced from wastewater while recovering resources.

Reduction of selenite to elemental Se(0) with simultaneous degradation of phenol by co-cultures of Phanerochaete chrysosporium and Delftia lacustris.

The simultaneous removal of phenol and selenite from synthetic wastewater was investigated by adopting two different co-culturing techniques using the fungus Phanerochaete chrysosporium and the bacterium Delftia lacustris. Separately grown biomass of the fungus and the bacterium (suspended co-culture) was incubated with different concentrations of phenol (0-1,200 mg/L) and selenite (10 mg/L). The selenite ions were biologically reduced to extracellular Se(0) nanoparticles (3.58 nm diameter) with the simultaneous degradation of up to 800 mg/L of phenol. Upon growing the fungus and the bacterium together using an attached growth co-culture, the bacterium grew as a biofilm onto the fungus. The extracellularly produced Se(0) in the attached growth co-culture had a minimum diameter of 58.5 nm. This co-culture was able to degrade completely 50 mg/L phenol, but was completely inhibited at a phenol concentration of 200 mg/L.

Investigation of architecture development and phosphate distribution in Chlorella biofilm by complementary microscopy techniques.

Microalgae biofilms may play an important role in the mitigation and prevention of eutrophication caused by domestic, agricultural and industrial wastewater effluents. Despite their potential, the biofilm development and role in nutrient removal are not well understood. Its clarification requires comprehensive studies of the complex three-dimensional architecture of the biofilm. In this study, we established a multimodal imaging approach to provide key information regarding architecture development and nutrient distribution in the biofilm of two green algae organisms: Chlorella pyrenoidosa and Chlorella vulgaris. Helium ion microscopy (HIM), scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM-EDX) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were employed for i) elucidation of spatial arrangement, ii) elemental mapping and iii) 3D chemical imaging of the biofilm. The fine structure of the algal biofilm was resolved by HIM, the evidence of the accumulation of phosphate in hot spots was provided by SEM-EDX and the localization of phosphate oxides granules throughout the whole sample was clarified by ToF-SIMS. The reported results shed light on the phosphorus distribution during Chlorella's biofilm formation and highlight the potential of such correlative approach to solve fundamental question in algal biotechnology research.

Microbial transformation of Se oxyanions in cultures of Delftia lacustris grown under aerobic conditions.

Delftia lacustris is reported for the first time as a selenate and selenite reducing bacterium, capable of tolerating and growing in the presence of ≥ 100 mM selenate and 25 mM selenite. The selenate reduction profiles of D. lacustris were investigated by varying selenate concentration, inoculum size, concentration and source of organic electron donor in minimal salt medium. Interestingly, the bacterium was able to reduce both selenate and selenite under aerobic conditions. Although considerable removal of selenate was observed at all concentrations investigated, D. lacustris was able to completely reduce 0.1 mM selenate within 96 h using lactate as the carbon source. Around 62.2% unaccounted selenium (unidentified organo-selenium compounds), 10.9% elemental selenium and 26.9% selenite were determined in the medium after complete reduction of selenate. Studies of the enzymatic activity of the cell fractions show that the selenite/selenate reducing enzymes were intracellular and independent of NADPH availability. D. lacustris shows an unique metabolism of selenium oxyanions to form elemental selenium and possibly also selenium ester compounds, thus a potential candidate for the remediation of selenium-contaminated wastewaters in aerobic environments. This novel finding will advance the field of bioremediation of selenium-contaminated sites and selenium bio-recovery and the production of potentially beneficial organic and inorganic reactive selenium species.

Optimization of Soil Washing to Reduce the Selenium Levels of Seleniferous Soil from Punjab, Northwestern India.

Seleniferous soil collected from the wheat ( L.)-grown agricultural land in Punjab, India, was characterized and the Se concentration in various soil fractions was determined by sequential extraction. The soil had a total Se content of 4.75 (±0.02) mg kg, of which 44% was observed in the oxidizable soil fraction. Soil flushing as an in situ technique was performed to simulate the Se migration pattern in case of rainfall or irrigation. Significant migration of Se from the upper layer to the lower layers was observed during water percolation through the soil column at a flow rate of 1 mL min, which could be attributed to Se reduction in the lower anoxic layers of the soil column. For ex situ treatment, the soil washing technique was optimized by varying different parameters such as treatment time, temperature, pH, liquid to solid (L:S) ratio, and presence of competing ions and oxidizing agents. Selenium extraction from soil was significantly improved by the presence of oxidizing agents in the washing solution: ∼38% Se was removed from the soil in the presence of 0.5% KMnO. In contrast, parameters such as treatment time, temperature, pH, L:S ratio, and competing ions did not significantly enhance the Se extraction efficiency. In this research, laboratory-scale in situ and ex situ treatment techniques for Se removal from soil were studied and optimized. The results provide an insight for large-scale Se removal and recovery from seleniferous soils.

Vertical subsurface flow constructed wetlands for the removal of petroleum contaminants from secondary refinery effluent at the Kaduna refining plant (Kaduna, Nigeria).

Typha latifolia-planted vertical subsurface flow constructed wetlands (VSSF CWs) and an unplanted microcosm constructed wetland were used for treating secondary refinery wastewater from the Kaduna Refining and Petrochemical Company (KRPC, Nigeria). Cow dung was applied to the planted wetlands at the start of the experiment and after 3 months to enhance plant growth and petroleum degradation. The T. latifolia-planted VSSF CWs removed 45-99% total petroleum hydrocarbon (TPH), 99-100% phenol, 70-80% oil and grease, 45-91% chemical oxygen demand (COD), and 46-88% total suspended solids (TSSs). The performance of the unplanted control VSSF CW achieved lower removal efficiencies (15-58% TPH, 86-91% phenol, 16-44% oil and grease, 24-66% COD, and 20-55% TSS). T. latifolia plants had a bioaccumulation factor (BAF) > 1 for phenol, total nitrogen (TN), and total phosphate (TP), suggesting a high removal performance for these contaminants and good translocation ability (TF) for TPH, phenol, oil and grease, and TN, with the exception of TP which was mainly retained in their roots (BAF = 47). This study showed T. latifolia is a good candidate plant to be used in VSSF CWs for polishing secondary refinery wastewater in developing countries.

Trace elements dosing and alkaline pretreatment in the anaerobic digestion of rice straw.

The effect of trace elements (TEs) addition and NaOH pretreatment on the anaerobic digestion of rice straw was investigated in batch tests. Co, Ni and Se were added to the raw rice straw at different dosages. The NaOH pretreatment was applied to the rice straw both alone and in combination with the addition of TEs, in order to evaluate potential synergistic effects of the pretreatment and the TEs supplementation on the biogas production yields. The results obtained showed that the alkaline pretreatment was more effective than the TEs addition in increasing the cumulative biogas production, causing a 21.4% enhancement of the final biomethane yield, whereas the increase due to TEs dosing was not statistically significant. The analysis of volatile fatty acids (VFAs) confirmed that the NaOH pretreatment resulted in a higher production of VFAs, indicating an increased hydrolysis, while TEs addition did not cause significant changes in the VFA concentrations.

Biological treatment of selenium-laden wastewater containing nitrate and sulfate in an upflow anaerobic sludge bed reactor at pH 5.0.

This study investigated the removal of selenate (SeO42-), sulfate (SO42-) and nitrate (NO3-) at different influent pH values ranging from 7.0 to 5.0 and 20 °C in an upflow anaerobic sludge blanket (UASB) reactor using lactate as an electron donor. At pH 5.0, the UASB reactor showed a 20-30% decrease in reactor performance compared to operation at pH 5.5 to 7.0, reaching removal efficiencies of 79%, 15%, 43% and 61% for NO3-, SO42-, Setotal and Sediss, respectively. However, the reactor stability was an issue upon lowering the pH to 5.0 and further experiments are recommended. The sludge formed during low pH operation had a fluffy, floc-like appearance with filamentous structure, possibly due to the low polysaccharide (PS) to protein (PN) ratio (0.01 PS/PN) in the soluble extracellular polymeric substances (EPS) matrix of the biomass. Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) analysis of the sludge confirmed Se oxyanion reduction and deposition of Se0 particles inside the biomass. Microbial community analysis using Illumina MiSeq sequencing revealed that the families of Campylobacteraceae and Desulfomicrobiaceae were the dominant phylotypes throughout the reactor operation at approximately 23% and 10% relative abundance, respectively. Furthermore, approximately 10% relative abundance of both Geobacteraceae and Spirochaetaceae was observed in the granular sludge during the pH 5.0 operation. Overall, this study demonstrated the feasibility of UASB operation at pH values ranging from 7.0 to 5.0 for removing Se and other oxyanions from wastewaters.