The preparation of a boronate affinity-based controlled oriented imprinting coating on a silica nanoparticle surface for the separation and purification of shikimic acid in herbal medicine.

Shikimic acid (SA) is one of the most effective drugs against the A (H1N1) virus and has high medicinal value. Additionally, it has the ability to generate non-toxic herbicides and antimicrobial medications. The extraction from plants has proven to be the main route of production of SA with economic benefits and environmental efficiency. Therefore, it is necessary to perform purification of SA from these herbal medicines before quantifying it. In this study, researchers employed a boronate affinity-based controlled oriented surface imprinting technique to produce molecularly imprinted polymers (MIPs) as highly effective solid phase extraction (SPE) adsorbents for the isolation and purification of SA. 3-Fluoro-4-formylphenylboronic acid functionalized silica nanoparticles were used as supporting materials for immobilizing SA. Poly(2-anilinoethanol) with a higher hydrophilic domain can be used as an effective imprinting coating. The prepared SA-imprinted silica nanoparticles exhibited several significant results, such as good specificity, high binding capacity (39.06 ± 2.24 mg g-1), moderate binding constant (6.61 × 10-4 M-1), fast kinetics (8 min) and low binding pH (pH 5.0) toward SA. The replication of SA-imprinted silica nanoparticles was deemed satisfactory. The SA-imprinted silica nanoparticles could be still reused after seven adsorption-desorption cycles, which indicated high chemical stability. In addition, the recoveries of the proposed method for SA at three spiked level analysis in star aniseed and meadow cranesbill were 96.2% to 109.0% and 91.6% to 103.5%, respectively. The SA-imprinted silica nanoparticles that have been prepared are capable of identifying the target SA in real herbal medicines. Our approach makes sample pre-preparation simple, fast, selective and efficient.

Determination of cis-diol-containing flavonoids in real samples using boronate affinity quantum dots coated with imprinted silica based on controllable oriented surface imprinting approach.

Novel boronate affinity imprinted quantum dots (BA-CdTe@MIPs QDs) were used to develop a selective and sensitive fluorescent nanosensor for determination of cis-diol-containing flavonoids such as quercetin (Qu), baicalein (Bai) and luteolin (Lut) based on controllable oriented surface imprinting approach. The boronate affinity imprinted silica was used as recognition elements. Under the optimum conditions, the imprinting factor (IF) for Qu, Bai and Lut was evaluated to be 9.42, 6.58 and 10.91, respectively. The results indicated that the boronate affinity quantum dots coated with imprinted silica were successfully prepared. The obtained BA-CdTe@MIPs QDs provided high selectivity and high sensitivity for cis-diol-containing flavonoids such as quercetin and luteolin. The BA-CdTe@MIPs QDs exhibited linear decrease in fluorescence intensity with the increase of concentration of quercetin in the 0.05-25 µM concentration range. The detection limit (LOD) is evaluated to be 0.02 µM. The obtained fluorescent nanosensor could be successfully applied to efficient detection of cis-diol-containing flavonoids in onion skin and human urine samples. The recoveries for the spiked onion skin and urine samples were evaluated to be 83.50-104.00% and 86.67-105.00%, respectively. Clearly, this study provides a rapid and efficient fluorescent detection tool for cis-diol-containing flavonoids in real samples.

Branched polyethyleneimine-assisted 3-carboxybenzoboroxole improved Wulff-type boronic acid functionalized magnetic nanoparticles for the specific capture of cis-diol-containing flavonoids under neutral conditions.

Flavonoids have shown a variety of biological activities such as antimicrobial, antibacterial, antifungal, antiviral, antiinflammatory, antitumor, antiatherogenic, and antihyperglycemic activities. A lot of important flavonoids contain cis-diols such as rutin (Ru), quercetin (Qu), luteolin (Lu), myricetin (Myr) and baicalein (Ba) and so on. It is necessary to establish a simple, low-cost and efficient purification method for cis-diol-containing flavonoids from plant extracts. Boronate affinity materials are able to reversibly bind the cis-diols via boronic acids by forming a five- or six-membered boronic cyclic ester in aqueous media. However, conventional boronate affinity materials have to be used in alkaline media, which can lead to the oxidation of cis-diols in compounds. In this study, the polyethyleneimine (PEI)-assisted 3-carboxybenzoboroxole-functionalized magnetic nanoparticles (MNPs) were prepared to achieve efficient capture of cis-diol-containing flavonoids under neutral conditions. Branched PEI was applied as a scaffold to amplify the number of boronic acid moieties, while 3-carboxybenzoboroxole, exhibiting high affinity and excellent water solubility toward flavonoids, was used as an affinity ligand. The prepared boronate affinity MNPs exhibited high binding capacity and fast binding kinetics (equilibrium in 3 min) under neutral conditions. In addition, the obtained boronate affinity MNPs exhibited high binding affinity (K d ≈ 10-4 M), low binding pH (pH ≥ 6.0) and tolerance of the interference to abundant sugars.

Efficient vitamin B12-imprinted boronate affinity magnetic nanoparticles for the specific capture of vitamin B12.

Vitamin B12 (VB12) has an important function in human physiology. However, analysis of VB12 at natural levels in foods or biological samples is difficult because of its very low concentration level and the presence of high-abundance components which can interfere with the measuring system. Thus, it is essential to develop efficient and selective enrichment approaches for VB12. Molecularly imprinted polymers (MIPs) have important applications from separation and sensing to catalysis. However, there is no report on the preparation of MIPs for VB12. Here, we use boronate affinity-based oriented surface imprinting to prepare MIPs for VB12. A VB12 template was first covalently immobilized onto the surface of boronic acid functionalized magnetic nanoparticles. Subsequently, a thin imprinting coating of poly(2-anilinoethanol) was formed to cover the substrate surface via in-water polymerization. After removing the template, 3D cavities complementary to the molecular size and shape of the template were formed in the imprinting layer. The imprinting coating was highly hydrophilic and presented limited residual boronic acid, thus non-specific binding was avoided. The prepared MIPs exhibited several highly favorable features, including excellent specificity, high binding strength and low binding pH. The prepared MIPs were successfully applied to the analysis of VB12 in human milk.

Efficient preparation of surface imprinted magnetic nanoparticles using poly (2-anilinoethanol) as imprinting coating for the selective recognition of glycoprotein.

In view of the significance of glycoprotein biomarkers for early clinical diagnostics and treatments of diseases, it is essential to develop efficient and selective enrichment approaches for glycoproteins. Molecularly imprinted polymers (MIPs) have found important applications for separation and enrichment of glycoproteins. In this study, we use boronate affinity-based controllable oriented surface imprinting to prepare glycoprotein-imprinted magnetic nanoparticles. A glycoprotein was first immobilized onto the surface of boronic acid functionalized magnetic nanoparticles by boronate affinity. Subsequently, self-polymerization of 2-anilinoethanol was carried out to form thin imprinting coating on the magnetic nanoparticles surface with appropriate thickness. After removing the template with an acidic solution containing sodium dodecyl sulfate, 3D cavities complementary to the template were efficiently formed in the imprinting layer. The imprinting coating was highly hydrophilic and presented limited residual boronic acid, thus non-specific binding was avoided. Using horseradish peroxidase as a model target, the effects of imprinting conditions on the properties and performance of the prepared MIPs were investigated. The obtained MIPs exhibited several highly favorable features, including excellent specificity, high binding strength and low binding pH. The MIPs were successfully applied to the analysis of transferrin (TRF) in human serum.

Characterization of the interaction between farrerol and bovine serum albumin by fluorescence and circular dichroism.

The binding of farrerol to bovine serum albumin (BSA) in aqueous solution was investigated by fluorescence quenching spectra, synchronous fluorescence spectra, circular dichroism (CD) and the three-dimensional (3D) fluorescence spectra at pH 7.40. The results of fluorescence titration indicated that farrerol could quench the intrinsic fluorescence of BSA in a static quenching way. The cause of showing upward curvy patterns in Stern-Volmer plots was analyzed. The binding sites number n and binding constant K using fluorescence quenching equation at 310 K were calculated. The binding distance and the energy transfer efficiency between farrerol and BSA were also obtained according to the theory of Förster's non-radiation energy transfer. The effect of some metal ions on the binding constant of farrerol with BSA was also studied. The effect of farrerol on the conformation of BSA was analyzed using CD, synchronous fluorescence spectra and three-dimensional (3D) fluorescence spectra under experimental conditions. Furthermore, the fluorescence displacement experiments indicated that farrerol could bind to the site I of BSA.