Comparative Studies of Extracts Obtained from Brassica oleracea L. Plants at Different Stages of Growth by Isolation and Determination of Isothiocyanates: An Assessment of Chemopreventive Properties of Broccoli.

The main goal of this work was to develop analytical procedures for the isolation and determination of selected isothiocyanates. As an example, particularly sulforaphane from plants of the Brassicaceae Burnett or Cruciferae Juss family. The applied methodology was mainly based on classical extraction methods and high-performance liquid chromatography coupled with tandem mass spectrometry. Moreover, the effect of temperature on the release of isothiocyanates from plant cells was considered. The cytotoxic activity of the obtained plant extracts against a selected cancer cell line has also been included. The results allow evaluating the usefulness of obtained plant extracts and raw sprouts regarding their content of isothiocyanates-bioactive compounds with chemopreventive properties.

Separation and Determination of Chemopreventive Phytochemicals of Flavonoids from Brassicaceae Plants.

The main aim of this study was to develop a method for the isolation and determination of polyphenols-in particular, flavonoids present in various morphological parts of plants belonging to the cabbage family (Brassicaceae). Therefore, a procedure consisting of maceration, acid hydrolysis and measurement of the total antioxidant capacity of plant extracts (using DPPH assay) was conducted. Qualitative analysis was performed employing thin-layer chromatography (TLC), which was presented to be a suitable methodology for the separation and determination of chemopreventive phytochemicals from plants belonging to the cabbage family. The study involved the analysis of 25 vegetal samples, including radish, broccoli, Brussels sprouts, kale, canola, kohlrabi, cabbage, Chinese cabbage, red cabbage, pak choi and cauliflower. In addition, selected flavonoids content in free form and bonded to glycosides was determined by using an RP-UHPLC-ESI-MS/MS method.

Determination of Neonicotinoids in Honey Samples Originated from Poland and Other World Countries.

A method development for determination of neonicotinoid residues in honey samples was developed. The proposed methodology consisted in QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe). That was used for sample preparation and UHPLC/UV (ultra-performance liquid chromatography with ultraviolet detection) utilized for chromatographic analysis. The developed method proved to be sensitive, with LOD (Limit of detection) value in the range of 60.80 to 80.98 ng/g hence LOQ (Limit of quantification) value was in the range of 184.26 to 245.40 ng/g. The method has tested on Polish honey and applied to honey from various countries (Bulgaria, Czech Republic, France, Greece, Italy, Portugal, Romania, Australia, Brazil, Cameroon, Russia, USA and Turkey). Several honey types were tested, while physicochemical properties of all honeys and were investigated. The methodology for general characterization of pollen grains originated from selected plants, to confirm the type of honey was also presented. There was a total lack of the mentioned neonicotinoids in sunflower honey. Except of this, only two samples of rapeseed and two samples of acacia honey (from Poland and Romania) were neonicotinoids free. In 19 samples the targeted pesticides were detected above LOQ. In all other investigated samples, the neonicotinoids were found at least at the LOD or LOQ level.

Flavonoids enantiomer distribution in different parts of goldenrod (Solidago virgaurea L.), lucerne (Medicago sativa L.) and phacelia (Phacelia tanacetifolia Benth.).

Plant material is a rich source of valuable compounds such as flavanones. Their different forms influence bioavailability and biological activity, causing problems with the selection of plant material for specific purposes. The purpose of this research was to determine selected flavanone (eriodictyol, naringenin, liquiritigenin, and hesperetin) enantiomer contents in free form and bonded to glycosides by an RP-UHPLC-ESI-MS/MS method. Different parts (stems, leaves, and flowers) of goldenrod (Solidago virgaurea L.), lucerne (Medicago sativa L.), and phacelia (Phacelia tanacetifolia Benth.) were used. The highest content of eriodictyol was found in goldenrod flowers (13.1 µg/g), where it occurred mainly as the (S)-enantiomer, and the greatest proportion of the total amount was bonded to glycosides. The richest source of naringenin was found to be lucerne leaves (4.7 µg/g), where it was mainly bonded to glycosides and with the (S)-enantiomer as the dominant form. Liquiritigenin was determined only in lucerne, where the flowers contained the highest amount (1.2 µg/g), with the (R)-enantiomer as dominant aglycone form and the (S)-enantiomer as the dominant glycosylated form. The highest hesperetin content was determined in phacelia leaves (0.38 µg/g), where it was present in the form of a glycoside and only as the (S)-enantiomer. A comparison of the different analyte forms occurring in different plant parts was performed for the first time.

New approach for fast identification of cyclitols by MALDI-TOF mass spectrometry.

INTRODUCTION: Alfalfa (Medicago sativa L.) is the subject of many studies due to its numerous chemical constituents and beneficial properties. Among these constituents are cyclitols, which have attracted attention due to the variety of biological properties they have. OBJECTIVE: A rapid and sensitive analytical procedure based on matrix-assisted laser desorption ionisation technique with time-of-flight and mass spectrometry (MALDI-TOF-MS) analysis was used for the first time for the identification of three cyclitols from different parts of alfalfa. METHODOLOGY: Plant extracts were prepared and purified using Soxhlet extraction and solid-phase extraction (SPE). Then, samples were dissolved in α-cyano-4-hydroxycinnamic acid (HCCA) matrix, and subjected to MALDI-TOF-MS analysis. RESULTS: The ion at m/z 524.0 was distributed in all standards and in leaves and stem extracts. In turn, the signal at m/z 335.1 was found in all standards and all alfalfa extracts. The ion at m/z144.1 was found just for d-chiro-inositol and distributed in all extracts. Both signals at m/z 265.9 and 250.0 were found only in l-chiro-inositol standard and the extract of stem. However, the ion at m/z 177.1 was found in d-pinitol standard and the extract of leaves. Based on molecular weights, information on fragment ions obtained by MALDI-TOF-MS, and the chemistry of cyclitols, we successfully identified three cyclitols (d-chiro-inositol, l-chiro-inositol, d-pinitol) in different parts of alfalfa (leaves, stem, flowers). CONCLUSION: The obtained results in this study proved that MALDI-TOF-MS is a rapid, sensitive and very powerful tool for identification of cyclitols within plants and has the potential to differentiate between enantiomers.

Complex investigation of extraction techniques applied for cyclitols and sugars isolation from different species of Solidago genus.

Cyclitols are phytochemicals naturally occurring in plant material, which attracted an increasing interest due to multiple medicinal attributes, among which the most important are the antidiabetic, antioxidant, and anticancer properties. Due to their valuable properties, sugars are used in the food industry as sweeteners, preservatives, texture modifiers, fermentation substrates, and flavoring and coloring agents. In this study, we report for the first time the quantitative analysis of sugars and cyclitols isolated from Solidago virgaurea L., which was used for the selection of the optimal solvent and extraction technique that can provide the best possible yield. Moreover, the quantities of sugars and cyclitols extracted from two other species, Solidago canadensis and Solidago gigantea, were investigated using the best extraction method and the most appropriate solvent. Comparative analysis of natural plant extracts obtained using five different techniques-maceration, Soxhlet extraction, pressurized liquid extraction, ultrasound-assisted extraction, and supercritical fluid extraction-was performed in order to decide the most suitable, efficient, and economically convenient extraction method. Three different solvents were used. Analysis of samples has been performed by solid-phase extraction for purification and pre-concentration, followed by derivation and GC-MS analysis. Highest efficiency for the total amount of obtained compounds has been reached by PLE, when water was used as a solvent. d-pinitol amount was almost similar for every solvent and for all the extraction techniques involved.

Determination of sugars and cyclitols isolated from various morphological parts of Medicago sativa L.

Plant research interest has increased all over the world, and a large body of evidence has been collected to show the huge potential of medicinal plants in various disease treatments. Medicago sativa L., known as alfalfa, is a rich source of biologically active components and secondary metabolites and was frequently used from the ancient times both as fodder crop and as a traditional medicine in the treatment of various diseases. Cyclitols, naturally occurring in this plant, have a particular interest for us due to their significant anti-diabetic, antioxidant, anti-inflammatory, and anti-cancer properties. In the present study we revealed the isolation, the identification, and the quantification of some cyclitols and sugars extracted from different morphological parts of alfalfa plant. Soxhlet extraction and solid phase extraction were used as extraction and purification methods, while for the analyses derivatization followed by gas chromatography with mass spectrometry was involved. The obtained results showed significant differences in the quantities of cyclitols and sugars found in the investigated morphological parts, ranging between 0.02 and 13.86 mg/g of plant in case of cyclitols, and in the range of 0.09 and 40.09 mg/g of plant for sugars. However, roots have the richest part of cyclitols and sugars in contrast to the leaves.

The comparison of solid phase microextraction-GC and static headspace-GC for determination of solvent residues in vegetable oils.

The objective of these investigations has been the determination of volatile organic compounds including residue solvents present in vegetable oil samples. Some olive oil, rape oil, sunflower oil, soy-bean oil, pumpkin oil, grape oil, rice oil as well as hazel-nut oil samples were analysed. Among residue solvents the following compounds have been mentioned: acetone, n-hexane, benzene, and toluene. Some experiments for the solid phase microextraction (SPME)-GC-flame ionisation detection (FID) were performed to examine extraction conditions such as fiber exposure time, temperature of extraction, and temperature of desorption. Various SPME fibers such as polydimethylsiloxane, Carboxen/polydimethylsiloxane and polydimethylsiloxane/divinylbenzene coatings were used for the isolation of tested compounds from vegetable oil samples. After optimisation of SPME, real vegetable oil samples were examined using SPME-GC/MS. Based on preliminary experiments the qualitative and quantitative analyses for the determination of acetone, n-hexane, benzene and toluene were performed by SPME-GC-FID and static head-space (SHS)-GC-FID methods. The regression coefficients for calibration curves for the examined compounds were R(2) > or = 0.992. This shows that the used method is linear in the examined concentration range (0.005-0.119 mg/kg for SPME-GC-FID and 0.003-0.728 mg/kg for SHS-GC-FID). Chemical properties of analysed vegetable oils have been characterised by chemometric procedure (cluster analysis).