"One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids" [Bioresour. Technol. 102 (11) (2011)].

Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate {[BMIm][TS]} had high catalytic activity with 93% esterification rate for oleic acid at 140 °C but only 63.7% Jatropha biodiesel yield at 200 °C. When ZnCl2 was added to [BMIm][TS], a maximum Jatropha biodiesel yield of 92.5% was achieved at 180 °C. Addition of metal ions supplied Lewis acidic sites in ILs promoted both esterification and transestrification reactions. It was also found that the transition metal ions performed higher catalytic activity in transestrification than the ions of Group A. Mixture of [BMIm][TS] and ZnCl2 was easily separated from products for reuse to avoid producing pollutants.

Production of biodiesel and lactic acid from rapeseed oil using sodium silicate as catalyst.

Biodiesel and lactic acid from rapeseed oil was produced using sodium silicate as catalyst. The transesterification in the presence of the catalyst proceeded with a maximum yield of 99.6% under optimized conditions [3% (w/w) sodium silicate, methanol/oil molar ratio 9/1, reaction time 60 min, reaction temperature 60°C, and stirring rate 250 rpm]. After six consecutive transesterification reactions, the catalyst was collected and used for catalysis of the conversion of glycerol to lactic acid. A maximum yield of 80.5% was achieved when the reaction was carried out at a temperature of 300°C for 90 min. Thus, sodium silicate is an effective catalyst for transesterification and lactic acid production from the biodiesel by-product, glycerol.

One-step production of biodiesel from Jatropha oil with high-acid value in ionic liquids.

Catalytic conversion of un-pretreated Jatropha oil with high-acid value (13.8 mg KOH/g) to biodiesel was studied in ionic liquids (ILs) with metal chlorides. Several commercial ILs were used to catalyze the esterification of oleic acid. It was found that 1-butyl-3-methylimidazolium tosylate ([BMIm][CH(3)SO(3)]; a Brønsted acidic IL) had the highest catalytic activity with 93% esterification rate for oleic acid at 140°C but only 12% biodiesel yield at 120°C. When FeCl(3) was added to [BMIm][CH(3)SO(3)], a maximum biodiesel yield of 99.7% was achieved at 120°C. Because metal ions in ILs supplied Lewis acidic sites, and more of the sites could be provided by trivalent metallic ions than those of bivalent ones. It was also found that the catalytic activity with bivalent metallic ions increased with atomic radius. Mixture of [BMIm][CH(3)SO(3)] and FeCl(3) was easily separated from products for reuse to avoid producing pollutants.