Mechanism Study of Organic Sulfur Hydrogenation over Pt- and Pd-Loaded Alumina-Based Catalysts.

The hydrogenation of organic sulfur (CS2) present in industrial off-gases to produce sulfur-free hydrocarbons and H2S can be achieved by using noble-metal catalysts. However, there has been a lack of comprehensive investigation into the underlying reaction mechanisms associated with this process. In this study, we have conducted an in-depth examination of the activity and selectivity of Pt- and Pd-loaded alumina-based catalysts, revealing significant disparities between them. Notably, Pd/Al2O3 catalysts exhibit an enhanced performance at low temperatures. Furthermore, we have observed that CS2 displays a higher propensity for conversion to methane when employing Pt/Al2O3 catalysts, while Pd/Al2O3 catalysts demonstrate a greater tendency for coke deposition. By combining experimental observations with theoretical calculations, we revealed that the capability of H2 spillover along with the adsorption capacity of CS2, play pivotal roles in determining the observed differences. Moreover, the key intermediate species involved in the methanation and coke pathways were identified. The intermediate CH2S* is found to be crucial in the methanation pathway, while the intermediate CSH* is identified as significant in the coke pathway.

Interactions between CuO NPs and PS: The release of copper ions and oxidative damage.

Copper oxide nanoparticles (CuO NPs) can adversely affect lung health possibly by inducing oxidative damage through the release of copper ions. However, the migration and transformation processes of CuO NPs in lung lining fluid is still unclear, and there are still conflicting reports of redox reactions involving copper ions. To address this, we examined the release of copper ions from CuO NPs in simulated lung fluid supplemented with pulmonary surfactant (PS), and further analyzed the mechanisms of PS-CuO NPs interactions and the health hazards. The results showed that the phospholipid of PS was adsorbed on the particle surface, which not only induced aggregation of the particles but also provided a reaction environment for the interaction of PS with CuO NPs. PS was able to promote the release of ions from CuO NPs, of which the protein was a key component. Lipid peroxidation, protein destabilization, and disruption of the interfacial chemistry also occurred in the PS-CuO NPs interactions, during which copper ions were present only as divalent cations. Meanwhile, the contribution of the particle surface cannot be neglected in the oxidative damage to the lung caused by CuO NPs. Through reacting with biomolecules, CuO NPs accomplished ion release and induced oxidative damage associated with PS. This research was the first to reveal the mechanism of CuO NPs releasing copper ions and inducing lipid oxidative damage in the presence of PS, which provides a new idea of transition metal-induced health risk in human body.

Enhanced biological phosphorus removal from wastewater by current stimulation coupled with anaerobic digestion.

The integrated wastewater discharge standard for phosphorus has become increasingly strict. In this study, a synergetic current stimulation system coupled with anaerobic digestion was used to enhance phosphorus removal from wastewater. The effects of current intensity, pH, and methane (CH4) synthesis on phosphorus removal were investigated. As direct current was supplied to an anaerobic bioreactor, the removal of sewage total phosphorus was significantly enhanced. The conditions of weak acid and low negative oxidation-reduction potential facilitated the phosphorus removal from wastewater. The optimal parameters for the dephosphorisation process were a current intensity of 100 mA and a pH of 6.0. When the anaerobic digestion process was inhibited by the reagent 2-bromoethanesulphonic acid sodium (BES), abundant metabolic intermediates accumulated and methanogenesis clearly decreased. Affected by the current stimulation and the inhibition of CH4 synthesis, the formation of gaseous phosphine (PH3) was greatly improved, and then PH3 escaped from the digestion mixture after it was absorbed by microbial cells. The maximum PH3 content of the digestion gas was 41.8 mg m-3 in the reactor supplied with a current of 100 mA and BES addition of 10 mmol L-1, and the phosphorus removal in this digestion system reached 55.2% at 6 d; however, the removal in the conventional anaerobic digestion system was only 17.7% after the same amount of time. Finally, a pathway of enhanced anaerobic biological phosphorus removal was proposed to better understand the inherent synergistic mechanism.

From wastes to functions: A paper mill sludge-based calcium-containing porous biochar adsorbent for phosphorus removal.

With the increased awareness of reusing solid wastes for higher sustainability and the concern of water pollution associated with phosphorus over-emission, there are strong interests in developing solid waste based adsorbents for purifying phosphorus-containing wastewater. As a rich calcium resource, paper mill sludge (i.e., a major solid waste from pulping industry) can be used as phosphorus removal adsorbent after calcination. Thus, in this work, a simple and clean thermally treating route has been proposed for preparing calcium-containing biochar from paper mill sludge. The effect of the physicochemical properties of paper mill sludge and its carbonization condition on phosphorus adsorption has been analyzed. Moreover, the influence of some key adsorption parameters, e.g., biochar dosage, initial pH of solution, co-existing anions, initial phosphorus concentration and contact time has also been investigated. The results showed that the phosphorus adsorption data could be fitted well with pseudo-second-order kinetic and Langmuir isothermal models. The calculated maximum adsorption capacity of the as-prepared optimal calcium-containing biochar could reach to 68.49 mg·g-1 at 25 °C. Combined with the characterization results, it can be reasonably inferred that the adsorption process was chemisorption-dominated. Lastly, the application of this spent adsorbent in agriculture field has also been discussed. In brief, this work provided a feasible strategy for converting paper mill solid waste to an environmental functional material (i.e., calcium-rich biochar) for remediation of eutrophic water.

First Report of Colletotrichum siamense Causing Leaf Spot on Alocasia macrorrhiza in China.

Alocasia macrorrhiza (L.) Schott, known as Alocasia is found in the Araceae, and is widely planted in southern China for its ornamental and medicinal value. This plant has a wide range of pharmacological effects, and has potential anti-tumor activity (Lei et al. 2013). In July of 2019, leaf spots were observed on A. macrorrhiza in the Xixiangtang Area, Nanning, Guangxi, China. Disease symptoms began with water-soaked yellow-green spots and progressed to form brown, round or oval lesions with yellow halos. Under severe conditions, spots merged into larger irregular lesions. More than 60% of the plants in a 0.5 ha field showed disease symptoms. Symptomatic leaves were collected and cut into small pieces (3×3 mm). Leaf pieces from the margin of the necrotic tissue were surface sterilized in 75% alcohol for 10 s, followed by 2% sodium hypochlorite solution for 2 min, then rinsed three times in sterile distilled water. Tissues were plated on potato dextrose agar (PDA) and incubated at 28°C for 5 days in the dark. Among over 30 isolates, most shared a similar morphology, the isolation rate of these was 86.7% and three of these (GY1-1A, GY1-1B, and GY1-1C) were chosen for single-spore purification and used for fungal morphological characterization and identification. White feathery aerial mycelia with olivaceous gray mycelia below were observed in 7-day cultures. After 14 days, orange conidia were observed. Conidia were hyaline, guttulate, smooth, one-celled, and cylindrical, averaged 13.79 µm × 5.26 µm, 13.89 µm × 5.33 µm and 13.92 µm × 5.42 µm for GY1-1A, GY1-1B and GY1-1C, respectively. Appressoria were mostly irregular in outline, deeply lobed or lightly lobed, gray brown to dark brown, conidial appressoria were 7.93 to 8.74 µm × 5.26 to 5.42 µm, mycelial appressoria were 7.15 to 10.11 µm × 5.60 to 7.44 µm. These morphological characteristics were similar to the C. siamense as previously described (Weir et al. 2012). The partial internal transcribed spacer (ITS) regions, actin (ACT), chitin synthase (CHS-1), glyceraldehydes-3-phosphate dehydrogenase (GAPDH), calmodulin (CAL), ß-tubulin (TUB2), and the intergenic region of apn2 and MAT1-2-1 (ApMAT) were amplified from genomic DNA for the three isolates using primers ITS4/ITS1 (White et al. 1990), ACT-512F/ACT-783R, CHS-79F/CHS-354R, GDF1/GDR1, CL1C/CL2C, Bt2a/Bt2b (Weir et al. 2012), and AM-F/AM-R (Silva et al. 2012) and sequenced. All sequences showed over 99% identity with C. siamense and were deposited in GenBank (ITS, MW040179-MW040181; ACT, MW049220-MW049222; CHS-1, MW049229-MW049231; GAPDH, MW049232-MW049234; CAL, MW049226-MW049228; TUB, MW049235-MW049237; ApMAT, MW049223-MW049225). Maximum Likelihood (ML) phylogenetic tree was constructed with MEGA 5 using the concatenation of multiple sequences (ACT, CHS-1, GAPDH, ITS, TUB2, CAL). According to the phylogenetic tree, all three isolates were found with C. siamense with 95% bootstrap support. To confirm pathogenicity, three sets (three plants per set) of healthy leaves were slightly scratched with autoclaved toothpicks at each of eight locations. Each inoculation location was a cross (2 mm length) and inoculation location was at least 3 cm apart. Ten µl of conidial suspension (106 conidia /ml in 0.1% sterile Tween 20) was applied to the inoculation areas. A control group was mock inoculated with 0.1% sterile Tween 20. Plants were covered with plastic bags to maintain a high humidity environment and placed in a 28°C growth chamber with constant light for 7 days. Inoculated leaves showed yellowish brown spots (0.4 × 0.65 cm), but no symptoms were observed in the control group. The fungus was reisolated from inoculated leaves, and these isolates matched the molecular and morphological characteristics of the original isolates confirming Koch's postulates. Reported hosts of this pathogen include Coffea arabica, Carica papaya, Melilotus indicus and Litchi chinensis (Weir et al. 2012; Qin et al. 2017; Ling et al. 2019) and so on. To our knowledge, this is the first report of C. siamense causing leaf spot on A. macrorrhiza in China. The identification of this pathogen provides a foundation for the management of leaf spot on this medicinal plant.

[Acid Mine Wasteland Reclamation by Juncus ochraceus Buchen as a Potential Pioneer Plant].

Ecological reclamation is the major method for the revegetation of acid mine wasteland worldwide. In this study the pH, fertility characteristics, and heavy metal content of soils from Laili Mountain mine wasteland were analyzed. The research also studied the morphological characteristics and the heavy metal in Juncus ochraceus Buchen as well as its resistance to acid, adaptability to soil fertility in abandoned land, and tolerance to heavy metal pollution (e.g., Zn and Cu) to determine its remediation potential as a pioneer plant for acid mine wasteland. Results showed that the pH of soils in the study area were acidic, ranging from 3.46 to 4.01.The contents of organic matter, total potassium, total phosphorus, and available phosphorus was poor, being 10.28-25.75 g·kg-1, 8.84-9.32 g·kg-1, 0.56-0.63 g·kg-1, and 1.82-5.72 mg·kg-1 respectively.The contents of Zn, Cu, and Fe in the soil ranged between 54.93 and 114.49 mg·kg-1, 92.53 and 127.59 mg·kg-1, and 47133.60 and 112259.63 mg·kg-1, whereby the Cu content was 1.85-2.55 times higher than the risk screening value. The height of Juncus ochraceus Buchen in the study area ranged from 43.77 cm to 55.42 cm, which was shorter than the average plant height of the control group (51.38-57.66 cm); however, this was not a significant difference, thus indicating that this plant was resistant to acidic soil and heavy metal pollution.Further analysis showed that Juncus ochraceus Buchen had accumulating capacity for both Cu and Zn, and transferring capacity for Zn as well. Thus, it had potential in heavy metal accumulation and absorption.Plant height was significantly related to the available phosphorus content in the rhizosphere soil. In the future, soil fertility could be improved by supplementing fertilizers containing available phosphorus when Juncus ochraceus Buchen is planted on the land of abandoned mines as a pioneer plant. Comprehensive analysis revealed that Juncus ochraceus Buchen had great potential as a pioneer plant to remediate acid mine wasteland.

Removal of SO2 and NOx from flue gas using mud-phosphorus slurry.

In this study, the mud-phosphorus slurry was used to simultaneously remove SO2 and NOx. The technology proposed new avenues for the purification and utilization of remove SO2 and NOx in flue gas. The effects of reaction temperature, solid-liquid ratio, and oxygen content on the efficiency of desulfurization and denitrification were studied experimentally. Results show that the parameters were solid-liquid ratio of 5.0 g/40 mL, T = 60 °C, φ (O2) = 20%, Q = 300 mL/min under the best experimental conditions. The maximum amount of ozone generated was 563.8 mg/m3. The reaction time with desulfurization rate ≥ 99% was 340 min; the reaction time with denitrification rate ≥ 99% was 160 min. Response surface analysis method was used to perform a three-factor three-level response surface experiment. Results show that the oxygen content had a highly significant effect on the desulfurization and denitrification efficiency, and the relationship between the desulfurization and denitrification efficiency was oxygen content > mud-phosphorus slurry liquid-solid ratio > reaction temperature. The process is simple, the solid waste is used to treat the flue gas, and the removal effect is good, which is convenient for popularization.

Succinate-GPR-91 receptor signalling is responsible for nonalcoholic steatohepatitis-associated fibrosis: Effects of DHA supplementation.

BACKGROUND AND AIMS: Treatment of non-alcoholic steatohepatitis (NASH) is challenging, because suppressing fibrotic progression has not been achieved consistently by drug candidates currently in clinical trials. The aim of this study was to investigate the molecular interplays underlying NASH-associated fibrosis in a mouse NASH model and human specimens. METHODS: Mice were divided into 4 groups: Controls; NASH (high fat/Calorie diet plus high fructose and glucose in drinking water, HFCD-HF/G) for 16 weeks; HFCD-HF/G plus docosahexaenoic acid (DHA) for 16 or 8 weeks. RESULTS: Along with NASH progression, fibrotic deposition was documented in HFCD-HF/G-fed mice. Liver succinate content was significantly increased along with decreased expression of succinate dehydrogenase-A (SDH-A) in these mice; whereas, GPR-91 receptor expression was much enhanced in histology compared to control mice, and co-localized histologically with hepatic stellate cells (HSCs). Succinate content was increased in fatty acid-overloaded primary hepatocytes with significant oxidant stress and lipotoxicity. Exposure to succinate led to up-regulation of GPR-91 receptor in primary and immortalized HSCs. In contrast, suppression of GPR-91 receptor expression abolished succinate stimulatory role in GPR-91 expression and extracellular matrix production in HSCs. All these changes were minimized or abrogated by DHA supplementation in vivo or in vitro. Moreover, GPR-91 receptor expression correlates with severity of fibrosis in human NASH biopsy specimens. CONCLUSION: Succinate accumulation in steatotoic hepatocytes may result in HSC activation through GPR-91 receptor signalling in NASH progression, and the cross-talk between hepatocytes and HSC through GPR-91 signalling is most likely to be the molecular basis of fibrogenesis in NASH.

Nonreductive biomineralization of uranium by Bacillus subtilis ATCC-6633 under aerobic conditions.

Nonreductive biomineralization of uranium is a promising methodology for the removal of uranium contamination as it provides stable products and wide applications. However, the efficiency of mineralization has become a major obstacle for the removal of uranium contamination by this technology, and the mineralizing process still remains largely obscure. To solve this problem in a practical way, we report a fast nonreductive biomineralization process of uranium by Bacillus subtilis ATCC-6633, a widespread bacterium with environmentally-friendly applications. In this system, we demonstrated that the size and crystallization degree of the obtained nonreduced biomineralized products is significantly superior to the results reported in the literature under comparable conditions. Meanwhile, combined with SEM, TEM, and FT-IR, a mineralization process of uranium transfer from the outer surface of the Bacillus subtilis ATCC-6633 to the internal has been clearly observed, which was accompanied by the evolution of amorphous U(VI) to crystalline uramphite. This work uncovers whole-process insights into the nonreductive biomineralization of uranium by Bacillus subtilis ATCC-6633, paving a new way for the rapid and sustained removal of uranium contamination.

Research on the variations of organics and heavy metals in municipal sludge with additive acetic acid and modified phosphogypsum.

Concentration and fraction distribution of organics and heavy metals in municipal sludge treated by modified phosphogypsum and acetic acid (signed as MPG/HAC) were studied. The results showed that MPG/HAC conditioning significantly produce synergistic enhancement effect to dissolution of unstable heavy metals wrapped in the stable colloid network. Simultaneously, after conditioning, about 45.16% of organics such as proteins, polysaccharides and humic acid in supernatant was degraded, thus dissociating large amount of active group which accelerated immobilization of dissolved heavy metals and weaken its toxicity. In addition, MPG with a porous structure could adsorb unstable heavy metals and transform them into residual fraction, leading to a considerable decrease in their mobility risk level. Besides, linear regression models showed that a strong oxidizability of sludge, and destruction of colloidal network could greatly promote dissolution of unstable heavy metals. Simultaneously, sludge oxidizability and organics degradation rate, and disintegration of extracellular polymeric substances (EPS) layer highly accelerate immobilization of unstable metals. Excepting Cd, environmental risk of Cr, Cu, Pb, Zn, Ni and As can be effectively weakened after conditioning. Additionally, MPG/HAC conditioning might be appropriate for stabilization of Cd, Cr and Zn in water supply sludge, especially for Zn.

Research on dewaterability and properties of sewage sludge under modified phosphogypsum and acetic acid pretreatments.

A combined modified phosphogypsum (MPG) and acetic acid (HAC) addition was performed to pretreat sewage sludge for better dewaterability, and dewatering performance, sludge flocs morphology, properties of treated sludge, composition and morphology distribution of extracellular polymeric substances (EPS), bound water release dynamic were investigated. Results suggested that combined addition could highly improve sludge dewatering compared to single addition. Furthermore, after pretreatment, stable sludge network was disintegrated and massive loosely bound EPS (LB-EPS) were destroyed into supernatant, thus increasing amount of organics with molecular weight between 1000 and 7000 Da in soluble EPS (SB-EPS). Simultaneously, about 9.5 kg kg-1 DS (Dry solids) of bound water was released from sludge network.

Investigation on extracellular polymeric substances, sludge flocs morphology, bound water release and dewatering performance of sewage sludge under pretreatment with modified phosphogypsum.

Modified phosphogypsum (MPG) was developed to improve dewaterability of sewage sludge, and dewatering performance, properties of treated sludge, composition and morphology distribution of EPS, dynamic analysis and multiple regression model on bound water release were investigated. The results showed that addition of MPG caused extracellular polymeric substances (EPS) disintegration through charge neutralization. Destruction of EPS promoted the formation of larger sludge flocs and the release of bound water into supernatant. Simultaneously, content of organics with molecular weight between 1000 and 7000 Da in soluble EPS (SB-EPS) increased with increasing of EPS dissolved into the liquid phase. Besides, about 8.8 kg•kg-1DS of bound water was released after pretreatment with 40%DS MPG dosage. Additionally, a multiple linear regression model for bound water release was established, showing that lower loosely bond EPS (LB-EPS) content and specific resistance of filtration (SRF) may improve dehydration performance, and larger sludge flocs may be beneficial for sludge dewatering.

Surface functionalized exosomes as targeted drug delivery vehicles for cerebral ischemia therapy.

The safe and effective delivery of drugs is a major obstacle in the treatment of ischemic stroke. Exosomes hold great promise as an endogenous drug delivery nanosystem for the treatment of cerebral ischemia given their unique properties, including low immunogenicity, innate stability, high delivery efficiency, and ability to cross the blood-brain barrier (BBB). However, exosome insufficient targeting capability limits their clinical applications. In this study, the c(RGDyK) peptide has been conjugated to the exosome surface by an easy, rapid, and bio-orthogonal chemistry. In the transient middle cerebral artery occlusion (MCAO) mice model, The engineered c(RGDyK)-conjugated exosomes (cRGD-Exo) target the lesion region of the ischemic brain after intravenous administration. Furthermore, curcumin has been loaded onto the cRGD-Exo, and administration of these exosomes has resulted in a strong suppression of the inflammatory response and cellular apoptosis in the lesion region. The results suggest a targeting delivery vehicle for ischemic brain based on exosomes and provide a strategy for the rapid and large-scale production of functionalized exosomes.

Simultaneous adsorption of SO2 and NO from flue gas over mesoporous alumina.

Mesoporous alumina (MA) with a higher ability to simultaneously remove SO2 and NO was prepared by the evaporation-induced self-assembly process. The adsorption capacities of MA are 1.79 and 0.702 mmol/g for SO2 and NO, respectively. The Brunauer-Emmett-Teller method was used to characterize the adsorbent. Simultaneous adsorption of SO2 and NO from flue gas over MA in different operating conditions had been studied in a fixed bed reactor. The effects of temperature, oxygen concentration and water vapour were investigated. The experimental results showed that the optimum temperature for MA to simultaneously remove SO2 and NO was 90°C. The simultaneous adsorption capacities of SO2 and NO could be enhanced by increasing O2 when its concentration was below 5%. The changes of simultaneous adsorption capacities were not obvious when O2 concentration was above 5%. The increase in relative humidity results in an increase after dropping of SO2 adsorption capacity, whereas the adsorption capacity of NO showed an opposite trend. The results suggest that MA is a great adsorbent for simultaneous removal of SO2 and NO from flue gas.

Lycium barbarum polysaccharides as an adjuvant for recombinant vaccine through enhancement of humoral immunity by activating Tfh cells.

Lycium barbarum polysaccharides (LBP) have been shown to play a variety of immune-modulatory functions which include activation of T and B cells. Follicular helper T (Tfh) cells are now recognized as a subset of helper T cells which regulate the multiple stages of B cell maturation and function. In our current study, we found that LBP were able to activate CXCR5+PD-1+ Tfh cells and induce IL-21 secretion. At the same time LBP also promoted the formation of germinal centers (GC) and production of GL-7+B220+GC B cells. LBP as an adjuvant could increase generation of rAd5VP1-induced Tfh cells. Our results indicate that LBP might enhance T cell-dependent Ab responses by acting as an adjuvant for the generation of Tfh cells. Future vaccine designs might therefore be targeted to induce strong antigen-specific Tfh responses in order to boost its protective effects.

Environmental risk assessment system for phosphogypsum tailing dams.

This paper may be of particular interest to the readers as it provides a new environmental risk assessment system for phosphogypsum tailing dams. In this paper, we studied the phosphogypsum tailing dams which include characteristics of the pollution source, environmental risk characteristics and evaluation requirements to identify the applicable environmental risk assessment methods. Two analytical methods, that is, the analytic hierarchy process (AHP) and fuzzy logic, were used to handle the complexity of the environmental and nonquantitative data. Using our assessment method, different risk factors can be ranked according to their contributions to the environmental risk, thereby allowing the calculation of their relative priorities during decision making. Thus, environmental decision-makers can use this approach to develop alternative management strategies for proposed, ongoing, and completed PG tailing dams.

Curcumin promotes cardiac repair and ameliorates cardiac dysfunction following myocardial infarction.

BACKGROUND AND PURPOSE: Curcumin, the natural yellow pigment extracted from the rhizomes of the plant curcuma longa, has been demonstrated to exhibit a variety of potent beneficial effects, acting as an antioxidant, anti-inflammatory and anti-fibrotic. In this study we tested the hypothesis that curcumin attenuates maladaptive cardiac repair and improves cardiac function after ischaemia and reperfusion by reducing degradation of extracellular matrix (ECM) and inhibiting synthesis of collagens via TGFß/Smad-mediated signalling pathway. EXPERIMENTAL APPROACH: Sprague-Dawley rats were subjected to 45 min of ischaemia followed by 7, 21 and 42 days of reperfusion respectively. Curcumin was fed orally at a dose of 150 mg·kg(-1) ·day(-1) only during reperfusion. KEY RESULTS: Curcumin reduced the level of malondialdehyde, inhibited activity of MMPs, preserved ECM from degradation and attenuated collagen deposition, as it reduced the extent of collagen-rich scar and increased mass of viable myocardium. In addition to reducing collagen synthesis and fibrosis in the ischaemic/reperfused myocardium, curcumin significantly down-regulated the expression of TGFß1 and phospho-Smad2/3, and up-regulated Smad7 and also increased the population of α-smooth muscle actin expressing myofibroblasts within the infarcted myocardium relative to the control. Echocardiography showed it significantly improved left ventricular end-diastolic volume, stroke volume and ejection fraction. The wall thickness of the infarcted middle anterior septum in the curcumin group was also greater than that in the control group. CONCLUSION AND IMPLICATIONS: Dietary curcumin is effective at inhibiting maladaptive cardiac repair and preserving cardiac function after ischaemia and reperfusion. Curcumin has potential as a treatment for patients who have had a heart attack.

[Effects of COD/TN and HRT(s) on nutrients removal by an alternating anoxic/oxic CAST].

The effects of different COD/TN and HRT(s) (hydraulic retention time of select) on nutrients removal were investigated by using an alternating anoxic/oxic CAST (cyclic activated sludge technology) fed with municipal wastewater. The results showed that various COD/TN and HRT(s) had a bigger influence on the nitrogen removal efficiency rather than the COD removal efficiency. As the influent C/N ratios were about 2.6 and 3.5, ammonia was removed by 98% and TN removal efficiency was increased from 62.9% to 76.2% and 72.1% to 84.6%, respectively, by increasing the HRT(s) from 1.8 h to 5 h. When the COD/TN ratio was increased to about 4.4, TN removal efficiency was decreased from 86.3% to 58.2% by enlarging the HRT(s), which was due to the incomplete nitrification of ammonia. It was also observed that both of increasing the COD/TN and HRT(s) could improve the phosphorus removal performance of the system. Furthermore, effluent of CAST reached the demanded A of integrated wastewater discharge standards (GB 18918-2002) when the COD/TN and HRT(s) were 4.4 and 1.8 h, respectively.

Adsorption of low concentration phosphine in yellow phosphorus off-gas by impregnated activated carbon.

In order to utilize high concentration CO comprehensively, impregnated activated carbon sorbent and the catalytic oxidation reaction for PH(3) were investigated in this study. Carbon was impregnated with HCl, KNO(3), or hexanediol. The activated carbon modified by 7% (mass fraction) HCl could enhance the adsorption purification ability significantly. Raising the reaction temperature or increasing the oxygen content of the gas can improve the purification efficiency. The structure of the materials after modification was determined using nitrogen adsorption. The modification decreased the volume of pores smaller than 2 nm in diameter with the most noticeable change occurring in the micropores ranging from 0.3 nm to 1.5 nm in diameter. Decreases in micropore volume accounted for 87% of the total pore volume change. After the adsorption, the surface areas decreased 28%, 29% of which was due to decreased micropore surface. HCl significantly increased the performance of carbon as a PH(3) adsorbent when HCl impregnation was applied whereas the effects of other materials used in this study were much less pronounced. HCl present in the small pores probably acted as a catalyst for oxygen activation that caused PH(3) oxidation. As a result of this process, H(3)PO(4) and P(4)O(10) were formed, strongly adsorbed, and present in the small pores ranging from 0.3 nm to 1.5 nm. In conclusion, this study provides evidence that CO from industrial off-gas can be purified and used as the raw material for a broader range of products.