Analysis of survivorship after total hip arthroplasty using a ceramic head.

To determine the clinical efficacy of an alumina ceramic head, 119 cemented total hip arthroplasties in 97 patients using an alumina head coupled with ethylene oxide gas sterilized polyethylene were reviewed. Eighty-two patients (101 hips) with greater than 10 years followup were evaluated clinically and radiographically (range, 10-17.6 years), and 97 patients (119 hips) were evaluated for survivorship analysis (range, 0.6-17.6 years). The average functional hip scores according to Merle d'Aubigné and Postel improved from 8.6 preoperatively to 15.0 at the final followup, and 57 patients (64 hips) had no pain. The average polyethylene wear rate was 0.15 mm/year (range, 0.04-0.34 mm/year). Patients with polyethylene wear greater than 3 mm showed significantly higher rates of acetabular loosening. Fifteen-year survival rates (with 95% confidence intervals) with radiographic evidence of aseptic loosening as the end point were 46.8% +/- 13.4% in acetabular components and 91.9% +/- 6.6% in femoral components. Fifteen-year survival rates of hip arthroplasties with revision because of aseptic loosening as the end point were 75.3% +/- 10.2% and 97.9% +/- 3.0%, respectively. Results of the current study suggest that using an alumina head instead of a metal head may not be beneficial when coupled with ethylene oxide gas sterilized polyethylene.

Influence of polyethylene and femoral head surface quality on wear: a retrieval study.

Thirty-two polyethylene sockets and 22 femoral heads were retrieved because of aseptic loosening more than 9 years after total hip arthroplasty. The volumetric wear rates of the retrieved polyethylene sockets were significantly greater in those coupled with an alumina head (P < 0.05). The retrieved alumina heads showed significantly better surface roughness and roundness than heads of Co-Cr and of stainless steel (P < 0.05). However, no significant difference was found in polyethylene quality demonstrated as fusion defects among the three different groups. The present study suggests that maintaining better surface roughness and roundness of the femoral heads does not always result in an in vivo reduction of polyethylene wear.

The Metal-Cancellous Cementless Lübeck total hip arthroplasty. Five-to-nine-year results.

We implanted 51 Metal-Cancellous Cementless Lübeck (MCCL) prostheses into 45 patients with dysplastic hips and followed 49 hips (96.1%) for five to nine years. One had needed revision for stem fracture and one for infection; the clinical outcome of the other 47 hips was assessed using the Merle d'Aubigné and Postel hip score. All hips were either excellent (63%) or good (37%). Three patients (6%) had mild thigh pain at six months, but this had settled within two years. Serial radiographs showed stable fixation with bone ingrowth in all hips, with increased density of the cancellous bone in contact with the implant and some trabecular ingrowth. There was early varus shift of the stem in one hip, but this stabilised in three months. Osteolysis of the femoral cortex was seen in one hip at seven years after surgery, and mild bone resorption due to stress shielding in 31 (63%). Acetabular bone grafting with autogenous bone from the femoral head gave successful support to the socket in 13 hips. The MCCL prosthesis gave satisfactory mid-term results in patients with osteoarthritis secondary to hip dysplasia.

Efficacy of alumina ceramic heads for cemented total hip arthroplasty.

Fifty-seven cemented total hip arthroplasties (THAs) were reviewed in cases of osteoarthrosis secondary to congenital dysplasia or dislocation. The bearing surface of the prosthesis used in this series consists of a polyethylene acetabular component on an alumina ceramic head. All acetabular components were positioned at the same level as the original acetabulum, and an autologous femoral head graft was performed for 18 hips. The follow-up period ranged from five to eight years, averaging six years two months. The latest survey showed excellent and good results for 53 hips (92.9%). Four acetabular components (7%) and two femoral components (3.5%) showed roentgenographic evidence of loosening. Only one hip (1.8%) had to be treated with revision surgery for femoral component loosening. None of the cases suffered a broken ceramic head. The use of a total hip prosthesis with an alumina ceramic head in THA is likely to lead to excellent results for patients with osteoarthrosis of the hip.