RESUMEN
Owing to the excellent bioactive properties of recombinant human bone morphogenetic proteins (rhBMPs), dentistry considers them as a fascinating adjuvant alternative for enhancing bone regeneration and bone-to-implant junction in the early implantation stages. However, stable loading and delivery efficiency of rhBMPs on the implant surfaces involve major concerns because of the harsh wearing condition under load during implantation. In this study, to achieve successful rhBMP-2 delivery, a nanoporous surface structure is introduced on the sandblasting with large grit and acid-etching (SLA)-treated titanium (Ti) surface via the tantalum (Ta) target-ion induced plasma sputtering (TIPS) technique. Unlike oxidation-induced surface nanoporous fabrications on a Ti surface, TIPS-treated surfaces provide excellent structural unity of the nanoporous structure with the substrate due to their etching-based fabrication mechanism. SLA/TIPS-treated Ti exhibits distinct nanoporous structures on the microscale surface geometry and better hydrophilicity compared with SLA-treated Ti. A sufficiently empty nanoporous surface structure combined with the hydrophilic property of SLA/TIPS-treated Ti facilitates the formation of a thick and uniform coating layer of rhBMP-2 on the surface without any macro- and microcoagulation. Compared with the SLA-treated Ti surface, the amount of coated rhBMP-2 increases up to 63% on the SLA/TIPS-treated Ti surface. As a result, the in vitro pre-osteoblast cell response of the SLA/TIPS-treated Ti surface, especially cell adhesion and differentiation behaviors, improves remarkably. A bone-regenerating direct comparison between the rhBMP-2-coated SLA-treated and SLA/TIPS-treated Ti is conducted on a defective dog mandible model. After 8 weeks of implantation surgery, SLA/TIPS-treated Ti with rhBMP-2 exhibits a better degree of contact area for the implanted bone, which mineralizes new bones around the implant. Quantitative results of bone-in-contact ratio and new bone volume also show significantly higher values for the SLA/TIPS-treated Ti with the rhBMP-2 specimen. These results confirm that an SLA/TIPS-treated surface is a suitable rhBMP-2 carrier for a dental implant to achieve early and strong osseointegration of Ti dental implants.