Dual nanocarrier of chlorhexidine and fluconazole: Physicochemical characterization and effects on microcosm biofilms and oral keratinocytes.

OBJECTIVES: This study assembled and characterized a dual nanocarrier of chlorhexidine (CHX) and fluconazole (FLZ), and evaluated its antibiofilm and cytotoxic effects. METHODS: CHX and FLZ were added to iron oxide nanoparticles (IONPs) previously coated by chitosan (CS) and characterized by physical-chemical analyses. Biofilms from human saliva supplemented with Candida species were grown (72 h) on glass discs and treated (24 h) with IONPs-CS carrying CHX (at 39, 78, or 156 µg/mL) and FLZ (at 156, 312, or 624 µg/mL) in three growing associations. IONPs and CS alone, and 156 µg/mL CHX + 624 µg/mL FLZ (CHX156-FLZ624) were tested as controls. Next, microbiological analyses were performed. The viability of human oral keratinocytes (NOKsi lineage) was also determined (MTT reduction assay). Data were submitted to ANOVA or Kruskal-Wallis, followed by Fisher's LSD or Tukey's tests (α=0.05). RESULTS: Nanocarriers with spherical-like shape and diameter around 6 nm were assembled, without compromising the crystalline property and stability of IONPs. Nanocarrier at the highest concentrations was the most effective in reducing colony-forming units of Streptococcus mutans, Lactobacillus spp., Candida albicans, and Candida glabrata. The other carriers and CHX156-FLZ624 showed similar antibiofilm effects, and significantly reduced lactic acid production (p<0.001). Also, a dose-dependent cytotoxic effect against oral keratinocytes was observed for the dual nanocarrier. IONPs-CS-CHX-FLZ and CHX-FLZ significantly reduced keratinocyte viability at CHX and FLZ concentrations ≥7.8 and 31.25 µg/mL, respectively (p<0.05). CONCLUSION: The nanotherapy developed outperformed the effect of the combination CHX-FLZ on microcosm biofilms, without increasing the cytotoxic effect of the antimicrobials administered. CLINICAL SIGNIFICANCE: The dual nanocarrier is a promising topically-applied therapy for the management of oral candidiasis considering that its higher antibiofilm effects allow the use of lower concentrations of antimicrobials than those found in commercial products.

Effect of fluoride gels with nano-sized sodium trimetaphosphate on the in vitro remineralization of caries lesions.

OBJECTIVE: To evaluate the effects of fluoride (F) gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMPmicro and TMPnano, respectively) on the in vitro remineralization of caries-like lesions. METHODOLOGY: Bovine enamel subsurface lesions (n=168) were selected according to their surface hardness (SH) and randomly divided into seven groups (n=24/group): Placebo (without F/TMP), 4,500 ppm F (4500F), 4500F + 2.5% TMPnano (2.5% Nano), 4500F + 5% TMPnano (5% Nano), 4500F + 5% TMPmicro (5% Micro), 9,000 ppm F (9000F), and 12,300 ppm F (Acid gel). The gels were applied in a thin layer for one minute. Half of the blocks were subjected to pH cycling for six days, whereas the remaining specimens were used for loosely- (calcium fluoride; CaF2) and firmly-bound (fluorapatite; FA) fluoride analysis. The percentage of surface hardness recovery (%SHR), area of subsurface lesion (ΔKHN), CaF2, FA, calcium (Ca), and phosphorus (P) on/in enamel were determined. Data (log10-transformed) were subjected to ANOVA and the Student-Newman-Keuls' test (p<0.05). RESULTS: We observed a dose-response relation between F concentrations in the gels without TMP for %SHR and ΔKHN. The 2.5% Nano and 5% Micro reached similar %SHR when compared with 9000F and Acid gels. For ΔKHN, Placebo and 5% Nano gels had the highest values, and 5% Micro, 2.5% Nano, 9000F, and Acid gels, the lowest. All groups had similar retained CaF2 values, except for Placebo and Acid gel. We verified observed an increase in Ca concentrations in nano-sized TMP groups. Regarding P, TMP groups showed similar formation and retention to 9000F and Acid. CONCLUSION: Adding 2.5% nano-sized or 5% micrometric TMP to low-fluoride gels lead to enhanced in vitro remineralization of artificial caries lesions.

Effect of fluoride gels with nano-sized sodium trimetaphosphate on the in vitro remineralization of caries lesions

Abstract Objective To evaluate the effects of fluoride (F) gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMPmicro and TMPnano, respectively) on the in vitro remineralization of caries-like lesions. Methodology Bovine enamel subsurface lesions (n=168) were selected according to their surface hardness (SH) and randomly divided into seven groups (n=24/group): Placebo (without F/TMP), 4,500 ppm F (4500F), 4500F + 2.5% TMPnano (2.5% Nano), 4500F + 5% TMPnano (5% Nano), 4500F + 5% TMPmicro (5% Micro), 9,000 ppm F (9000F), and 12,300 ppm F (Acid gel). The gels were applied in a thin layer for one minute. Half of the blocks were subjected to pH cycling for six days, whereas the remaining specimens were used for loosely- (calcium fluoride; CaF2) and firmly-bound (fluorapatite; FA) fluoride analysis. The percentage of surface hardness recovery (%SHR), area of subsurface lesion (ΔKHN), CaF2, FA, calcium (Ca), and phosphorus (P) on/in enamel were determined. Data (log10-transformed) were subjected to ANOVA and the Student-Newman-Keuls' test (p<0.05). Results We observed a dose-response relation between F concentrations in the gels without TMP for %SHR and ΔKHN. The 2.5% Nano and 5% Micro reached similar %SHR when compared with 9000F and Acid gels. For ΔKHN, Placebo and 5% Nano gels had the highest values, and 5% Micro, 2.5% Nano, 9000F, and Acid gels, the lowest. All groups had similar retained CaF2 values, except for Placebo and Acid gel. We verified observed an increase in Ca concentrations in nano-sized TMP groups. Regarding P, TMP groups showed similar formation and retention to 9000F and Acid. Conclusion Adding 2.5% nano-sized or 5% micrometric TMP to low-fluoride gels lead to enhanced in vitro remineralization of artificial caries lesions.

Effects of Sodium Hexametaphosphate and Fluoride on the pH and Inorganic Components of Streptococcus mutans and Candida albicans Biofilm after Sucrose Exposure

In order to improve the anticaries effects of fluoridated products, the supplementation of these products has been considered a promising alternative for caries control. This study evaluated the effects of sodium hexametaphosphate (HMP) and/or fluoride (F) on the inorganic components and pH of Streptococcus mutans and Candida albicans dual-species biofilms. The biofilms were treated 72, 78, and 96 h after the beginning of their formation with 0.25, 0.5, or 1% HMP-containing solutions with or without F (500 ppm, as sodium fluoride). F-containing solutions (500 ppm and 1100 ppm) and artificial saliva were used as controls. The biofilms were exposed to a 20% sucrose solution after the third treatment. Along with the biofilm pH, the concentrations of F, calcium, phosphorus (P), and HMP were determined. HMP, combined with F, increased F levels and decreased P levels in the biofilm fluid compared to that of the solution with 500 ppm F. Exposure to sucrose decreased the concentrations of all ions in the biomass, except for HMP; 1% HMP, combined with F, promoted the highest pH. It can be concluded that HMP affected the inorganic composition of the biofilm and exerted a buffering effect on the biofilm pH.

Effects of sodium hexametaphosphate microparticles or nanoparticles on the growth of saliva-derived microcosm biofilms.

OBJECTIVES: This study evaluated the effects of sodium hexametaphosphate microparticles (HMPmicro) or nanoparticles (HMPnano) on the growth of saliva-derived microcosm biofilms MATERIALS AND METHODS: Saliva-derived biofilms were formed on glass coverslips for 24 h. Thereafter, Streptococcus mutans (C180-2) was incorporated or not into the biofilms. From that time point onwards, solutions containing 0.2% HMPmicro or HMPnano, combined or not with 220 ppm F, were constantly present in the culture medium. In addition, 220 ppm F alone (220F) and McBain medium without any compound were also tested as positive and negative controls (CTL), respectively. After 96 h, the biofilms were plated on anaerobic blood agar or sucrose agar bacitracin for total and S. mutans CFU-counting, respectively. Biofilms' lactic acid production was analysed spectrophotometrically. Data were submitted to ANOVA or Kruskal-Wallis' tests, followed by Student-Newman-Keuls' test (p<0.05; n=12). RESULTS: HMPmicro or HMPnano led to significantly lower lactic acid production, and significant reductions in total CFU-counting in microcosm biofilms, supplemented or not with S. mutans, in comparison to both controls, with significant differences between 220F and CTL. No significant differences were observed among the groups treated with HMPmicro or HMPnano (with or without F). The same trend was seen for S. mutans CFU-counting, in biofilms supplemented with S. mutans. CONCLUSIONS: HMP significantly reduced total and S. mutans CFU counts, as well as lactic acid production by saliva-derived microcosm biofilms. CLINICAL RELEVANCE: These findings in saliva-derived microcosm biofilms suggest that HMP stands as a promising alternative for the control of cariogenic biofilms.

Effects of Antifungal Carriers Based on Chitosan-Coated Iron Oxide Nanoparticles on Microcosm Biofilms.

Resistance of Candida species to conventional therapies has motivated the development of antifungal nanocarriers based on iron oxide nanoparticles (IONPs) coated with chitosan (CS). This study evaluates the effects of IONPs-CS as carriers of miconazole (MCZ) or fluconazole (FLZ) on microcosm biofilms. Pooled saliva from two healthy volunteers supplemented with C. albicans and C. glabrata was the inoculum for biofilm formation. Biofilms were formed for 96 h on coverslips using the Amsterdam Active Attachment model, followed by 24 h treatment with nanocarriers containing different concentrations of each antifungal (78 and 156 µg/mL). MCZ or FLZ (156 µg/mL), and untreated biofilms were considered as controls. Anti-biofilm effects were evaluated by enumeration of colony-forming units (CFUs), composition of the extracellular matrix, lactic acid production, and structure and live/dead biofilm cells (confocal laser scanning microscopy-CLSM). Data were analyzed by one-way ANOVA and Fisher LSD's test (α = 0.05). IONPs-CS carrying MCZ or FLZ were the most effective treatments in reducing CFUs compared to either an antifungal agent alone for C. albicans and MCZ for C. glabrata. Significant reductions in mutans streptococci and Lactobacillus spp. were shown, though mainly for the MCZ nanocarrier. Antifungals and their nanocarriers also showed significantly higher proportions of dead cells compared to untreated biofilm by CLSM (p < 0.001), and promoted significant reductions in lactic acid, while simultaneously showing increases in some components of the extracellular matrix. These findings reinforce the use of nanocarriers as effective alternatives to fight oral fungal infections.

Effect of fluoride, casein phosphopeptide-amorphous calcium phosphate and sodium trimetaphosphate combination treatment on the remineralization of caries lesions: An in vitro study.

OBJECTIVE: To evaluate the effects of combination of treatments with fluoridated toothpastes supplemented with sodium trimetaphosphate (TMP) and casein phosphopeptide-amorphous calcium phosphate (MI Paste Plus®), on the remineralization of dental enamel. DESIGN: Enamel blocks with artificial caries were randomly allocated into six groups (n = 12), according to the toothpastes: 1) without F-TMP-MI Paste Plus® (Placebo); 2) 1100 ppm F (1100 F), 3) MI Paste Plus®, 4) 1100 F + MI Paste Plus® (1100 F-MI Paste Plus®), 5) 1100 F + 3% TMP (1100 F-TMP) and 6) 1100 F-TMP + MI Paste Plus® (1100 F-TMP-MI Paste Plus®). Blocks were treated 2×/day with slurries of toothpastes (1 min). Furthermore, groups 4 and 6 received the application of MI Paste Plus® for 3 min. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); profile analysis and lesion depth subsurface through polarized light microscopy (PLM), confocal laser scanning microscopy (LSCM), scanning electron microscopy (SEM), fluoride (F), calcium (Ca), phosphorus (P) concentrations in the enamel were determined. The data were analyzed by ANOVA (1-criterion) and Student-Newman-Keuls test (p < 0.001). RESULTS: 1100 F-TMP-MI Paste Plus® group showed the best results of %SHR, ΔKHN and PLM (p < 0.001). F concentration was similar between the 1100 F, 1100 F-MI Paste Plus®, and 1100 F-TMP-MI Paste Plus® groups (p > 0.001). 1100 F-TMP-MI Paste Plus® group showed the highest concentration of Ca and P in the enamel (p < 0.001). CONCLUSION: The association of 1100 F-TMP and MI Paste Plus® led to a significant increase in the remineralization of initial carious lesions.

In situ effect of fluoride toothpaste supplemented with nano-sized sodium trimetaphosphate on enamel demineralization prevention and biofilm composition.

OBJECTIVE: To evaluate the effect of a fluoride toothpaste containing nano-sized sodium trimetaphosphate (TMPnano) on enamel demineralization in situ and composition of the biofilm. DESIGN: This crossover double-blind study consisted of four phases (seven days each) and 12 volunteers who wore oral appliances containing four enamel bovine blocks. The cariogenic challenge was performed by 30% sucrose solution (6x/day). The toothpaste treatments (3x/day) were as follows: no F/TMP/TMPnano (Placebo), 1100 ppm F (1100F), 1100F plus 3% micrometric or nano-sized TMP (1100F/TMP; 1100F/TMPnano). Percentage of surface hardness loss (%SH), and integrated loss of subsurface hardness (ΔKHN), as well as enamel calcium (Ca), phosphorus (P), and fluoride (F) were determined. Moreover, biofilm formed on the blocks were analyzed for F, Ca, P, and insoluble extracellular polysaccharide (EPS) concentrations. Data were analyzed using one-way ANOVA, repeated measures followed by Fisher LSD test (p < 0.001). RESULTS: 1100F/TMPnano promoted the lowest %SH and ΔKHN among all groups (p < 0.001). Regarding the F concentrations in the enamel and in the biofilm, there were no significant differences between 1100 F and 1100 F/TMPnano, but significantly increased enamel Ca concentrations (p < 0.001). 1100F/TMPnano showed lower values of EPS concentration when compared with 1100F (∼80%) (p < 0.001). CONCLUSION: 1100F/TMPnano promoted a greater protective effect against enamel demineralization and significantly affected the composition of biofilm formed in situ when compared to 1100F toothpaste.

Remineralizing effect of a fluoridated gel containing sodium hexametaphosphate: An in vitro study.

OBJECTIVES: To evaluate in vitro the effect of neutral pH topical gels with reduced fluoride concentration (F), supplemented or not with sodium hexametaphosphate (HMP) on the remineralization of dental enamel, using a pH-cycling model. Materials and methods Bovine enamel blocks with caries-like lesions were randomly treated with five gels (n = 24/group): without F/HMP (Placebo); 4500 ppm F (4500F), 4500F plus 9% HMP (4500F + HMP); 9000 ppm F (9000F); and 12,300 ppm F (Acid gel). After pH-cycling, the percentage of surface hardness recovery (%SHR), integrated loss of subsurface hardness (ΔKHN), and concentrations of loosely- (CaF2) and firmly-bound (FA) fluoride formed and retained in/on enamel were determined. The results were analyzed by ANOVA followed by the Student-Newman-Keuls test (p < 0.001). RESULTS: The 4500F + HMP gel promoted the highest %SHR among all groups; the lowest ΔKHN was achieved by 4500F + HMP and Acid gel, without significant differences between these. The Acid gel group presented the highest CaF2 and FA formed and retained on/in enamel (p < 0.001). CONCLUSION: Based on the present results, the addition of 9% sodium hexametaphosphate to a gel with reduced fluoride concentration (4500F) was able to significantly enhance the remineralization of artificial carious lesions in vitro when compared to 4500F, reaching protective levels similar to an acidic formulation with ∼3-fold higher fluoride concentration.

Effect of fluoride toothpaste with nano-sized trimetaphosphate on enamel demineralization: An in vitro study.

OBJECTIVE: This study evaluated the effect of toothpastes containing 1100ppm F associated or not with micrometric or nano-sized sodium trimetaphosphate (TMP) on enamel demineralization in vitro, using a pH cycling model. DESIGN: Bovine enamel blocks (4mm×4mm, n=96) were randomly allocated into eight groups (n=12), according to the test toothpastes: Placebo (without fluoride or TMP); 1100ppm F (1100F); 1100F plus micrometric TMP at concentrations of 1%, 3% or 6%; and 1100F plus nanosized TMP at 1%, 3% or 6%. Blocks were treated 2×/day with slurries of toothpastes and submitted to a pH cycling regimen for five days. Next, final surface hardness (SHf), integrated hardness loss (IHL), differential profile of integrated hardness loss (ΔIHL) and enamel fluoride (F) concentrations were determined. Data were analyzed by ANOVA and Student-Newman-Keuls' test (p<0.05). RESULTS: The use of 1100F/3%TMPnano led to SHf 30% higher (p<0.001) and IHL∼80% lower (p<0.001) when compared to 1100F. This toothpaste also resulted in ∼64% reduction of mineral loss (ΔIHL) when compared to 1100F. Moreover, the addition of nano-sized TMP promoted increases in enamel F uptake of 90%, 160% and 100%, respectively for the concentrations of 1%, 3% and 6%, when compared to 1100F (p<0.001). CONCLUSION: The addition of nano-sized TMP at 3% to a conventional toothpaste significantly decreased enamel demineralization when compared to its counterparts without TMP or supplemented with micrometric TMP.

Fluoride and calcium concentrations in the biofilm fluid after use of fluoridated dentifrices supplemented with polyphosphate salts.

OBJECTIVES: The present study evaluated fluoride (F) and calcium (Ca) concentrations in the biofilm fluid formed in situ under cariogenic challenge after using F dentifrices supplemented or not with sodium trimetaphosphate (TMP) or calcium glycerophosphate (CaGP). METHODS: Volunteers (n = 12) were randomly divided into 5 groups according to the toothpastes used: placebo (without F, CaGP or TMP), 1100 ppm F (1100F) and low-fluoride dentifrice (LFD, 550 ppm F) with no supplementation (550F) or supplemented with 1 % TMP (550F-TMP) or 0.25 % CaGP (550F-CaGP). In each phase, volunteers wore palatal appliances containing 4 bovine enamel blocks. Cariogenic challenge was performed with 30 % sucrose solution, 6 times/day. On the morning of the eigth day, biofilm samples were collected 12 h and 1 h after brushing and cariogenic challenge. F and Ca analyses in the biofilm fluid were performed with the inverted electrode after buffering with TISAB III and using the Arsenazo III method, respectively. Data were submitted to two-way ANOVA (repeated measures) and Student-Newman-Keuls test (p < 0.05). RESULTS: A dose-response relationship was verified between F concentrations in the dentifrices and in the biofilm fluid. Significant differences were observed among placebo, 550F, and 1100F only 1 h after brushing, without statistical differences among 550F, 550F-TMP, and 550F-CaGP. No defined trend was observed among the groups regarding Ca concentrations, with the highest values seen for placebo and 550F-CaGP. CONCLUSION: The anticaries effect of LFDs supplemented with CaGP or TMP cannot be related to an increased availability of F and Ca in the biofilm fluid. CLINICAL SIGNIFICANCE: The better performance of LFDs containing CaGP or TMP shown in previous studies should be attributed to their ability to interact with tooth enamel and with the biofilm, rather to their effect on the biofilm fluid.

Fluoride toothpaste supplemented with sodium hexametaphosphate reduces enamel demineralization in vitro.

OBJECTIVE: The aim of this study was to evaluate the effect of fluoride dentifrices combined with sodium hexametaphosphate (HMP) on enamel demineralization in vitro. MATERIAL AND METHODS: Enamel bovine blocks were selected by initial surface hardness (SHi) and then divided into five experimental groups (n = 12): placebo (without fluoride and without HMP); 1100 ppm F (1100F); and 1100F associated with HMP at 0.5 % (1100HMP0.5%), 1 % (1100HMP1%), and 2 % of HMP (1100HMP2%). Blocks were submitted to five pH cycles (demineralizing/remineralizing solutions) at 37 °C. After pH cycling, final surface hardness (SHf), percentage of surface hardness loss (%SH), integrated differential hardness (ΔIH), integrated loss of subsurface hardness (ΔKHN), and enamel firmly bound fluoride (F) were determined. Data were submitted to one-way ANOVA, followed by Student-Newman-Keuls test (p < 0.05). RESULTS: Significant differences were observed among all groups regarding %SH and ΔKHN. 1100HMP1% promoted the lowest mineral loss among all groups (p < 0.001), and led to significantly lower demineralization in the deeper regions of the subsurface lesion when compared with the other HMP-containing toothpastes (p < 0.001). Significantly higher mineral loss was observed for 1100HMP2% when compared to the other fluoridated dentifrices, mainly in the outer part of the lesion (p < 0.001). Enamel F uptake was similar for 1100F and 1100HMP1% but significantly reduced for other HMP concentrations. CONCLUSION: The supplementation of a 1100-ppm F dentifrice with 1 % HMP promoted a higher inhibitory effect against enamel demineralization when compared to a dentifrice containing the same amount of fluoride in vitro. CLINICAL RELEVANCE: This dentifrice could potentially be indicated to patients at high risk of caries.

Effect of toothpaste with nano-sized trimetaphosphate on dental caries: In situ study.

OBJECTIVES: This in situ study was to evaluate the remineralizing effect of a fluoride toothpaste supplemented with nano-sized sodium trimetaphosphate (TMP). METHODS: This blind and cross-over study was performed in 4 phases of 3 days each. Twelve subjects used palatal appliances containing four bovine enamel blocks with artificial caries lesions. Volunteers were randomly assigned into the following treatment groups: Placebo (without F and TMP); 1100 ppm F (1100), 1100 supplemented with 3% micrometric TMP (1100 TMP) and with nano-sized TMP (1100 TMPnano). Volunteers were instructed to brush their natural teeth with the palatal appliances in the mouth during 1min (3 times/day), so that blocks were treated with natural slurries of toothpastes. After each phase, the percentage of surface hardness recovery (%SHR), integrated mineral recovery (IMR) and integrated differential mineral area profile (ΔIMR) in enamel lesions were calculated. F in enamel was also determined. Data were analyzed by ANOVA and Student-Newman-Keuls test. RESULTS: Enamel surface became 20% harder when treated with 1100 TMPnano in comparison with 1100 (p<0.001). 1100 TMPnano showed remineralizing capacity (IMR; ΔIMR) 66% higher when compared with 1100 TMP (p<0.001). Enamel F uptake in the 1100 TMPnano group was 2-fold higher when compared to its counterpart without TMP (p<0.001). CONCLUSION: The addition of 3% TMPnano to a conventional toothpaste was able to promote an additional remineralizing effect of artificial caries lesions. CLINICAL SIGNIFICANCE: Toothpaste containing 1100 ppm F associated with TMPnano showed a potential of higher remineralization to 1100 ppm F and 1100 ppm F micrometric TMP.

Supplementation of soft drinks with metallic ions reduces dissolution of bovine enamel.

OBJECTIVE: The aim of this study was to evaluate the effect of the addition of metallic ions to carbonated drinks on their erosive potential. MATERIAL AND METHODS: Powdered enamel was added to carbonated beverages (Coca-ColaTM or Sprite ZeroTM and shaken for 30 s. The samples were then immediately centrifuged and the supernatant removed. This procedure was repeated 5 times with the beverages containing Cu2+, Mg2+, Mn2+ or Zn2+ (1.25-60 mmol/L). For Coca-ColaTM, the concentration of each ion that exhibited the highest protection was also evaluated in combination with Fe2+. The phosphate or calcium released were analyzed spectrophotometrically. Data were analyzed using ANOVA and Tukey's test (p<0.05). RESULTS: For Coca-ColaTM, the best protective effect was observed for Zn2+ alone (10 mmol/L) or in combination (1 mmol/L) with other ions (12% and 27%, respectively, when compared with the control). Regarding Sprite ZeroTM, the best protective effect was observed for Cu2+ at 15 and 30 mmol/L, which decreased the dissolution by 22-23%. Zn2+ at 2.5 mmol/L also reduced the dissolution of powdered enamel by 8%. CONCLUSIONS: The results suggest that the combination of metallic ions can be an alternative to reduce the erosive potential of Coca-ColaTM. Regarding Sprite ZeroTM, the addition of Cu2+ seems to be the best alternative.

Supplementation of soft drinks with metallic ions reduces dissolution of bovine enamel

OBJECTIVE: The aim of this study was to evaluate the effect of the addition of metallic ions to carbonated drinks on their erosive potential. MATERIAL AND METHODS: Powdered enamel was added to carbonated beverages (Coca-ColaTM or Sprite ZeroTM and shaken for 30 s. The samples were then immediately centrifuged and the supernatant removed. This procedure was repeated 5 times with the beverages containing Cu2+, Mg2+, Mn2+ or Zn2+ (1.25-60 mmol/L). For Coca-ColaTM, the concentration of each ion that exhibited the highest protection was also evaluated in combination with Fe2+. The phosphate or calcium released were analyzed spectrophotometrically. Data were analyzed using ANOVA and Tukey's test (p<0.05). RESULTS: For Coca-ColaTM, the best protective effect was observed for Zn2+ alone (10 mmol/L) or in combination (1 mmol/L) with other ions (12% and 27%, respectively, when compared with the control). Regarding Sprite ZeroTM, the best protective effect was observed for Cu2+ at 15 and 30 mmol/L, which decreased the dissolution by 22-23%. Zn2+ at 2.5 mmol/L also reduced the dissolution of powdered enamel by 8%. CONCLUSIONS: The results suggest that the combination of metallic ions can be an alternative to reduce the erosive potential of Coca-ColaTM. Regarding Sprite ZeroTM, the addition of Cu2+ seems to be the best alternative. .