Folate targeting self-limiting hyperthermic nanoparticles for controlled photothermal therapy.

Photothermal therapy utilizes photothermal agents and the use of nanoparticle agents is deemed advantageous for multiple reasons. Common nano-photothermal agents normally have high conversion efficiencies and heating rates, but bulk temperature measurement methods do not adequately represent the nanoscale temperatures of these nanoheaters. Herein, we report on the fabrication of self-limiting hyperthermic nanoparticles that can simultaneously photoinduce hyperthermia and report back temperature ratiometrically. The synthesized nanoparticles utilize a plasmonic core to achieve the photoinduced hyperthermic property and fluorescent FRET pairs entrapped in a silica shell to impart the ratiometric temperature sensing ability. The studies demonstrate the photoinduced hyperthermia with simultaneous temperature measurement using these particles and show that the particles can achieve a conversion efficiency of 19.5% despite the shell architecture. These folate-functionalized self-limiting photothermal agents are also used to demonstrate targeted photoinduced hyperthermia in a HeLa cell model.

Evaluation of impact of sludge types and solids content on sludge treatment using microwave enhanced advanced oxidation process.

The microwave enhanced advanced oxidation process (MW-AOP) has been applied to pre-treat different sludge types and high solids content. Secondary sludge not only had the highest solids and nutrient content but also yielded higher treatment efficiency than primary or mixed sludge. In the case of secondary sludge with 4% total solids (TS), the total suspended solids (TSS) concentration was reduced by 32% while soluble chemical oxygen demand concentration increased from 1% to 40% after treatment at 110°C. A high level of nutrient release was also achieved; about 65% total phosphate (TP) solubilized at 110°C. The degree of secondary sludge disintegration was dictated by temperature and hydrogen peroxide dosage. The optimal operating temperature for the system was 110°C, and sludge containing TS up to 8% was treated effectively. Secondary sludge with 8% TS had a TSS reduction of 41% after treatment at 110°C while COD solubilization was about 45%; about 55% TP was solubilized at 10 min holding time. Treatment of sludge with higher solids content would allow for handling larger amounts of sludge at a given period and reduce heating cost per unit of treated sludge. The inter-relationship between the degree of sludge disintegration and changes in chemical and physical properties was also clearly demonstrated here. The treated sludge would be an ideal substrate for anaerobic digestion or phosphorous recovery processes. High levels of nutrients (phosphorus and nitrogen) and metal release, and solids disintegration from sludge containing high solids content would make subsequent resource recovery processes more effective and economical.

A Genome-Wide Analysis of Pathogenesis-Related Protein-1 (PR-1) Genes from Piper nigrum Reveals Its Critical Role during Phytophthora capsici Infection.

Black pepper (Piper nigrum L.) is a prominent spice that is an indispensable ingredient in cuisine and traditional medicine. Phytophthora capsici, the causative agent of footrot disease, causes a drastic constraint in P. nigrum cultivation and productivity. To counterattack various biotic and abiotic stresses, plants employ a broad array of mechanisms that includes the accumulation of pathogenesis-related (PR) proteins. Through a genome-wide survey, eleven PR-1 genes that belong to a CAP superfamily protein with a caveolin-binding motif (CBM) and a CAP-derived peptide (CAPE) were identified from P. nigrum. Despite the critical functional domains, PnPR-1 homologs differ in their signal peptide motifs and core amino acid composition in the functional protein domains. The conserved motifs of PnPR-1 proteins were identified using MEME. Most of the PnPR-1 proteins were basic in nature. Secondary and 3D structure analyses of the PnPR-1 proteins were also predicted, which may be linked to a functional role in P. nigrum. The GO and KEGG functional annotations predicted their function in the defense responses of plant-pathogen interactions. Furthermore, a transcriptome-assisted FPKM analysis revealed PnPR-1 genes mapped to the P. nigrum-P. capsici interaction pathway. An altered expression pattern was detected for PnPR-1 transcripts among which a significant upregulation was noted for basic PnPR-1 genes such as CL10113.C1 and Unigene17664. The drastic variation in the transcript levels of CL10113.C1 was further validated through qRT-PCR and it showed a significant upregulation in infected leaf samples compared with the control. A subsequent analysis revealed the structural details, phylogenetic relationships, conserved sequence motifs and critical cis-regulatory elements of PnPR-1 genes. This is the first genome-wide study that identified the role of PR-1 genes during P. nigrum-P. capsici interactions. The detailed in silico experimental analysis revealed the vital role of PnPR-1 genes in regulating the first layer of defense towards a P. capsici infection in Panniyur-1 plants.

Preparation, Spectroscopic Characterization, Theoretical Investigations, and In Vitro Anticancer Activity of Cd(II), Ni(II), Zn(II), and Cu(II) Complexes of 4(3H)-Quinazolinone-Derived Schiff Base.

Herein, we report the synthesis and characterization of a new Schiff base ligand 3-[[(E)-(3-hydroxyphenyl)-methylidene]amino]-2-methyl-quinazolin-4(3H)-one (HAMQ) and its Cd(II), Ni(II), Zn(II), and Cu(II) complexes (C1-C4). The ligand HAMQ was synthesized by reacting 3-hydroxybenzaldehyde and 3-amino-2-methyl-4(3H)-quinazolinone in a 1:1 molar ratio. The structure of the ligand and its complexes (C1-C4) were evaluated using ultraviolet (UV)-visible (Vis) light spectroscopy, 1H-NMR, Fourier-transform infrared (FT-IR) spectroscopy, MS, elemental analysis, conductance data, and thermogravimetric analysis (TGA). The characterization results suggested that the bidentate ligand, HAMQ, coordinated to the metal center through the lactum oxygen and the azomethine nitrogen. Moreover, all the metal complexes were analyzed using powder X-ray diffraction studies, which revealed that all of them belong to a triclinic crystal system. The research was supplemented by density functional theory (DFT) studies on the IR and UV-Vis spectra, as well as the chemical reactivity of the HAMQ and its four metallic derivatives making use of conceptual density functional theory (CDFT) by means of KID (Koopmans in DFT) methodology. The synthesized complexes displayed significant in vitro anticancer activity against human cancer cell lines (HeLa and HCT-115).

Microwave enhanced oxidation treatment of organic fertilizers.

BACKGROUND: Liquid organic fertilizers (LOFs) are relatively easier to degrade than those of solid organic fertilizers, and the nutrients are readily available for plant uptake. Microwave enhanced advanced oxidation treatment (MW/H2 O2 -AOP) was used to convert solid organic fertilizers (insoluble blood meal, bone meal, feather meal, sunflower ash and a mixture) into LOF. RESULTS: After the MW/H2 O2 -AOP treatment, high soluble nitrogen (11-29%), soluble phosphorus (64%) and potassium (92%), as well as low total suspended solids content could be obtained. The resulting LOF would make the nutrients more bioavailable, and would provide some of them for the plant uptake immediately. Temperature and hydrogen peroxide dosage were found to be significant factors affecting nitrogen release from blood meal and feather meal, while temperature and pH were found to be significant factors for solubilizing phosphorus and potassium from bone meal and ash, respectively. CONCLUSION: The MW/H2 O2 -AOP reduced suspended solids, and released nutrients into solution; therefore, it was an effective treatment method to make LOFs. © 2016 Society of Chemical Industry.

Microwave treatment of dairy manure for resource recovery: Reaction kinetics and energy analysis.

A newly designed continuous-flow 915 MHz microwave wastewater treatment system was used to demonstrate the effectiveness of the microwave enhanced advanced oxidation process (MW/H2O2-AOP) for treating dairy manure. After the treatment, about 84% of total phosphorus and 45% of total chemical oxygen demand were solubilized with the highest H2O2 dosage (0.4% H2O2 per %TS). The reaction kinetics of soluble chemical oxygen demand revealed activation energy to be in the range of 5-22 kJ mole-1. The energy required by the processes was approximately 0.16 kWh per liter of dairy manure heated. A higher H2O2 dosage used in the system had a better process performance in terms of solids solubilization, reaction kinetics, and energy consumption. Cost-benefit analysis for a farm-scale MW/H2O2-AOP treatment system was also presented. The results obtained from this study would provide the basic knowledge for designing an effective farm-scale dairy manure treatment system.

Effects of acidifying reagents on microwave treatment of dairy manure.

Dairy manure, acidified using organic acids (acetic, oxalic, and citric acid) were treated with microwave enhanced advanced oxidation process (MW/H2O2-AOP). The effect of a mixture of oxalic acid and commonly used mineral acids (sulfuric and hydrochloric acid) on MW/H2O2-AOP was also examined. Substantial amounts of phosphorus were released under MW/H2O2-AOP, regardless of organic acid or mineral acid used. All three organic acids were good acidifying reagents; however, only oxalic acid could remove free calcium ion in the solution, and improve settleability of dairy manure. The MW/H2O2-AOP and calcium removal process could be combined into a single-stage process, which could release phosphate, solubilize solids and remove calcium from dairy manure at the same time. A mixture of oxalic acid and mineral acid produced the maximum volume of clear supernatant and had an ideal molar ratio of calcium to magnesium for effective struvite (magnesium ammonium phosphate) crystallization process. A single-stage MW/H2O2-AOP would simplify the process and reduce mineral acid consumption compared to a two-stage operation. The results of a pilot scale study demonstrate that MW/H2O2-AOP is effective in treating manure and recovering resource from dairy farms.

Removal of oil by walnut shell media.

Studies were conducted to evaluate the oil sorption capacities of walnut shell media. Sorption capacity is the weight of oil picked up by unit weight of a sorbent. Initial oil pick-up by walnut shell media on pure oil and oil on aqueous medium was evaluated. Batch kinetic studies were conducted to evaluate the equilibrium time required by walnut shell media for sorbing oil. For pure oil medium, sorption capacities of 0.30g/g, 0.51g/g and 0.58g/g were obtained for standard mineral oil, vegetable oil and DoALL Bright-Edge oil, respectively. The results showed sorption capacities of 0.56g/g, 0.58g/g and 0.74g/g for standard mineral oil, vegetable oil and DoALL Bright-Edge oil, respectively, for oil on aqueous medium. It was found that sorbed oil could be recovered from walnut shell media by applying pressure. The study showed that walnut shell media can be used as a sorbent for oil removal.