Effect of temperature variation on phosphorus flux at the sediment-water interface of the steppe wetlands.

Environmental factors are generally considered to be important factors affecting the release process of phosphorus (P) in sediments. However, little is known about the effect of temperature increased at first and then decreased with the season change on the P flux rate and flux amount at the sediment-water interface in the steppe wetlands. The effects of the temperature variation on P flux at the sediment-water interface in the steppe wetlands during the vegetation growing season under simulated wetland habitat were studied. The results showed that the release of P from sediments to overlying water was greatly affected by temperature changes. When the temperature rose, P was released from the sediment into the overlying water, while P was precipitated from the water into the sediment with the temperature dropped. During simulation period, the total P in water flux rates between sediment and overlying water (FP) was ranged from - 4.51 to 4.99 mg·m-2·day-1, while the dissolved reactive P in water flux rates between sediment and overlying water (FDP) was changed from - 5.37 to 5.14 mg·m-2·day-1. The FP and FDP were negatively correlated with the content of total P in water (WTP), dissolved reactive P in water (WDRP), pH of sediment (pH), and microbial biomass P (MBP), but increased with temperature (T), aluminum phosphate (Al.P), and occluded phosphate (Oc.P). The P flux rates were affected by temperature variation both directly and indirectly; the mechanism of how temperature influenced the fate of P in the wetland is still not clear. Therefore, the physicochemical properties and kinetic, thermodynamic, and microbiology characteristics should be combined together to clarify the mechanism in future research.

Laboratory investigation of phosphorus loss with snowmelt and rainfall runoff from a Steppe wetland catchment.

Phosphorus (P) losses from terrestrial soils contribute to eutrophication of surface waters. As priority non-point source pollution ways, rainfall runoff (RS1) and snowmelt runoff (RS2) are the main carrier of P loss from terrestrial ecosystem. The aim of this study was to investigate the similarities and differences between P loss with RS1 and RS2 of the same soil type. Six types of soil were used in this experiment. Results have shown that 1), Different types of soil have different P loss with RS1 and RS2 under different slope, and the changes ranged from 0.003 to 0.370 mg L-1. 2), The effects of soil type, slope and runoff type on P loss with surface runoff was not independent, both individual effects of all factors and their interaction with the other two factors effected the P loss with runoff. 3), In our experiment, some soils showed no significant difference between P content in RS1 and RS2. In some soils, P loss with RS1 was higher than that with RS2 while the opposite conclusion was showed in Bog soil (BS) which with higher soil water content. 4), The P loss with RS1 and RS2 of different soils were both mainly affected by soil water content (SW), Olsen-P content (OP) and soil organic matter content (OM). These results can help us understand the P loss with different patterns of surface runoff better and are expected to provide pertinent opinions on the analysis of P loss with runoff and its influencing factors of grassland soils.

Analysis of factors controlling soil phosphorus loss with surface runoff in Huihe National Nature Reserve by principal component and path analysis methods.

Phosphorus (P) loss with surface runoff accounts for the P input to and acceleration of eutrophication of the freshwater. Many studies have focused on factors affecting P loss with surface runoff from soils, but rarely on the relationship among these factors. In the present study, rainfall simulation on P loss with surface runoff was conducted in Huihe National Nature Reserve, in Hulunbeier grassland, China, and the relationships between P loss with surface runoff, soil properties, and rainfall conditions were examined. Principal component analysis and path analysis were used to analyze the direct and indirect effects on P loss with surface runoff. The results showed that P loss with surface runoff was closely correlated with soil electrical conductivity, soil pH, soil Olsen P, soil total nitrogen (TN), soil total phosphorus (TP), and soil organic carbon (SOC). The main driving factors which influenced P loss with surface runoff were soil TN, soil pH, soil Olsen P, and soil water content. Path analysis and determination coefficient analysis indicated that the standard multiple regression equation for P loss with surface runoff and each main factor was Y = 7.429 - 0.439 soil TN - 6.834 soil pH + 1.721 soil Olsen-P + 0.183 soil water content (r = 0.487, p < 0.01, n = 180). Soil TN, soil pH, soil Olsen P, and soil water content and the interactions between them were the main factors affecting P loss with surface runoff. The effect of physical and chemical properties of undisturbed soils on P loss with surface runoff was discussed, and the soil water content and soil Olsen P were strongly positive influences on the P loss with surface runoff.

Dynamics of Phosphorus Content in the Water-Sediment Interface of Wetlands in a Mid-Temperature Steppe.

In order to reveal dynamics changes in phosphorus release from the sediments of wetlands in a mid-temperature steppe without external phosphorus input, the relationship between phosphorus content in the overlying water, sediment, and interstitial water was studied using the variables control method. The results showed that, during the incubation period, the content of total phosphorus in the overlying water and the content of total phosphorus in interstitial water both presented in the order of August > September > July. Furthermore, the correlation relationships between phosphorus content in the overlying water, total phosphorus in the interstitial water, and the ratios of sediment Olsen-P to total phosphorus in the interstitial water, indicated that Olsen-P might be a kind of release form of phosphorus - from the sediment to the overlying water of the wetlands in Hulunbeier steppe, without external phosphorus input.

Analysis of factors controlling sediment phosphorus flux potential of wetlands in Hulun Buir grassland by principal component and path analysis method.

Phosphorus (P) flux potential can predict the trend of phosphorus release from wetland sediments to water and provide scientific parameters for further monitoring and management for phosphorus flux from wetland sediments to overlying water. Many studies have focused on factors affecting sediment P flux potential in sediment-water interface, but rarely on the relationship among these factors. In the present study, experiment on sediment P flux potential in sediment-water interface was conducted in six wetlands in Hulun Buir grassland, China and the relationships among sediment P flux potential in sediment-water interface, sediment physical properties, and sediment chemical characteristics were examined. Principal component analysis and path analysis were used to discuss these data in correlation coefficient, direct, and indirect effects on sediment P flux potential in sediment-water interface. Results indicated that the major factors affecting sediment P flux potential in sediment-water interface were amount of organophosphate-degradation bacterium in sediment, Ca-P content, and total phosphorus concentrations. The factors of direct influence sediment P flux potential were sediment Ca-P content, Olsen-P content, SOC content, and sediment Al-P content. The indirect influence sediment P flux potential in sediment-water interface was sediment Olsen-P content, sediment SOC content, sediment Ca-P content, and sediment Al-P content. And the standard multiple regression describing the relationship between sediment P flux potential in sediment-water interface and its major effect factors was Y = 5.849 - 1.025X 1 - 1.995X 2 + 0.188X 3 - 0.282X 4 (r = 0.9298, p < 0.01, n = 96), where Y is sediment P flux potential in sediment-water interface, X 1 is sediment Ca-P content, X 2 is sediment Olsen-P content, X 3 is sediment SOC content, and X 4 is sediment Al-P content. Therefore, future research will focus on these sediment properties to analyze the interrelation among sediment properties factors, main vegetable factors, and environment factors which influence the sediment P flux potential in sediment-water interface.

Effects of Sediment Chemical Properties on Phosphorus Release Rates in the Sediment-Water Interface of the Steppe Wetlands.

Rising temperature causes a process of phosphorus release, which can be characterized well using phosphorus release rates (VP). The objective of the present study was to investigate the major factors affecting sediment phosphorus release rates through a wetland habitat simulation experiment. The results showed that the VP of different wetland sediments were different and changed with the order of W-R (river wetland) > W-L (lake wetland) > W-M (grassy marsh wetland) > W-A (reservoir wetland). The main driving factors which influenced sediment phosphorus flux velocity in the sediment-water interface were sediment B-SO42-, B-MBN and A-MBP content. Path analysis and determination coefficient analysis indicated the standard multiple regression equation for sediment phosphorus release rates in the sediment-water interface, and each main factor was Y = -0.105 + 0.096X1 + 0.275X2 - 0.010X3 (r = 0.416, p < 0.01, n = 144), where Y is sediment phosphorus release rates; X1 is sediment B-SO42- content; X2 is sediment B-MBN; and X3 is sediment A-MBP content. Sediment B-SO42-, B-MBN and A-MBP content and the interaction between them were the main factors affecting sediment phosphorus release rates in the sediment-water interface. Therefore, these results suggest that soil chemical properties and microbial activities likely play an important role in phosphorus release rates in the sediment-water interface. We hope to provide effective scientific management and control methods for relevant environmental protection departments.