Dietary nitrite supplementation attenuates cardiac remodeling in l-NAME-induced hypertensive rats.

Loss of nitric oxide (NO) bioavailability underlies the development of hypertensive heart disease. We investigated the effects of dietary nitrite on NG-nitro-l-arginine methyl ester (l-NAME)-induced hypertension. Sprague-Dawley rats were divided into five groups: an untreated control group, an l-NAME-treated group, and three other l-NAME-treated groups supplemented with 10 mg/L or 100 mg/L of nitrite or 100 mg/L of captopril in drinking water. After the 8-week experimental period, mean arterial blood pressure was measured, followed by sampling of blood and heart tissue for assessment of nitrite/nitrate levels in the plasma and heart, the plasma level of angiotensin II (AT II), and the heart transcriptional levels of AT II type 1 receptor (AT1R), transforming growth factor-ß1 (TGF-ß1), and connective tissue proteins such as type 1 collagen and fibronectin. Heart tissue was analyzed by histopathological morphometry, including assessments of ventricular and coronary vascular hypertrophy and fibrosis, as well as immunohistochemistry analyses of myocardial expression of AT1R. l-NAME treatment reduced the plasma nitrate level and led to the development of hypertension, with increased plasma levels of AT II and increased heart transcriptional levels of AT1R and TGF-ß1-mediated connective tissue proteins, showing myocardial and coronary arteriolar hypertrophy and fibrosis. However, dietary nitrite supplementation inhibited TGF-ß1-mediated cardiac remodeling by suppressing AT II and AT1R. These results suggest that dietary nitrite levels achievable via a daily high-vegetable diet could improve hypertensive heart disease by inhibiting AT II-AT1R-mediated cardiac remodeling.

Preparation and Evaluation of PEGylated Poly-L-ornithine Complex as a Novel Absorption Enhancer.

Polycationic compounds, such as poly-L-arginine and poly-L-ornithine (PLO), enhance the nasal absorption of hydrophilic macromolecular drugs. However, the bio availability corresponding to the dose of these enhancers has not been obtained in an open system study, where an administered solution is transferred to the pharynx because they do not exhibit mucoadhesion/retention in the nasal cavity. In this study, we prepared PEGylated-poly-L-ornithine (PEG-PLO) and investigated the effects of PEGylation on in vitro adhesion/retention properties, permeation enhancement efficiency, and cytotoxicity. PEG-PLO bearing 3-4 polyethylene glycol (PEG) chains per PLO molecule was more retentive than unmodified PLO on an inclined plate. The permeability of a model drug, FD-4, across Caco-2 cell sheets was enhanced by PEG-PLO as well as by PLO. PLO showed cytotoxicity at high concentrations, whereas PEG-PLO did not decrease cell viability, even above the concentration giving a sufficient enhancement effect. These findings suggest that PEGylation of polycationic absorption enhancers improves their adhesion/retention and decreases their cytotoxicity, which may lead to enhancers with greater utility.

Comparative study of protective activities of Neospora caninum bradyzoite antigens, NcBAG1, NcBSR4, NcMAG1, and NcSAG4, in a mouse model of acute parasitic infection.

Neospora caninum is an obligate intracellular protozoan parasite that causes severe neuromuscular diseases, repeated abortion, stillbirth, and congenital infection in livestock and companion animals. The development of an effective vaccine against neosporosis in cattle is an important issue due to the significant worldwide economic impact of this disease. We evaluated the immunogenicity of four bradyzoite antigens, NcBAG1 (first described in this study), NcBSR4, NcMAG1, and NcSAG4, using an acute infection mouse model to determine synergistic effects with the tachyzoite antigen as a candidate for vaccine production. Mice were inoculated with the recombinant vaccines (r-)NcBAG1, rNcBSR4, rNcMAG1, rNcSAG4, or phosphate-buffered saline (PBS) (adjuvant control group) in an oil-in-water emulsion with bitter gourd extract, a Th1 immune stimulator, or PBS alone as the infection control group. Mice inoculated with each vaccine developed antigen-specific IgG1 and IgG2a antibodies and isolated splenocytes from mice produced high levels of interferon-γ when infected with the N. caninum tachyzoite. The mice inoculated with rNcBAG1, rNcMAG1, or rNcSAG4 developed slight to moderate clinical symptoms but did not succumb to infection. In contrast, rNcBSR4 and both control groups developed severe disease and some mice required euthanasia. The parasitic burden in the brain tissues of vaccinated mice was assessed by N. caninum-specific real-time PCR at 5 weeks after infection. The parasite load in rNcBAG1-, rNcMAG1-, and rNcSAG4-inoculated mice was significantly lower than that in adjuvant and infection control mice. Therefore, these antigens may be useful for the production of a N. caninum-specific vaccination protocol.

The formation of an antibacterial agent-apatite composite coating on a polymer surface using a metastable calcium phosphate solution.

A percutaneous device with antibacterial activity and good biocompatibility is desired for clinical applications. Three types of antibacterial agent: lactoferrin (LF), tetracycline (TC), and gatifloxacin (GFLX) were immobilized on the surface of an ethylene-vinyl alcohol copolymer (EVOH) using a liquid phase coating process. In this process, an EVOH plate was alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with 4, 40, or 400 microg/mL of the antibacterial agent. As a result, the antibacterial agent was immobilized on the EVOH surface in the form of an antibacterial agent-apatite composite layer. The amount of immobilized antibacterial agent increased with increasing absorption affinity for apatite in the order: GFLX

Reduced platelet adhesion to titanium metal coated with apatite, albumin-apatite composite or laminin-apatite composite.

Titanium metal coated with apatite (HA-Ti), albumin-apatite composite (AA-Ti) or laminin-apatite composite (LA-Ti) was prepared by the immersion of NaOH- and heat-treated titanium metal in a calcium phosphate solution, or one supplemented with albumin or laminin. Platelet adhesion to the obtained materials under flow conditions was investigated in real time using a cone- and plate-type viscometer and fluorescence labeled platelets. Adhesion and activation of the platelets on the HA-Ti, AA-Ti and LA-Ti were definitely suppressed as compared with those on untreated titanium metal with a mirror surface. Furthermore, the numbers of platelets adhered to AA-Ti and LA-Ti are smaller than those adhered to HA-Ti, although the differences were not statistically significant. These findings suggest that HA-Ti, AA-Ti and LA-Ti, especially AA-Ti and LA-Ti, would exhibit thromboresistance that is superior to commercially pure titanium metal in terms of platelet adhesion.

Phase stability after aging and its influence on pin-on-disk wear properties of Ce-TZP/Al2O3 nanocomposite and conventional Y-TZP.

Recently zirconia/alumina composites have been examined by many researchers as the new generation of bearing materials in total joint replacements. In this study, the phase stability of a Ce-TZP/Al(2)O(3) nanocomposite and conventional Y-TZP after aging, and its influence on wear resistance, were investigated. Very slight phase transformation was observed in both types of ceramics 18 months after the implantation of Ce-TZP/Al(2)O(3) or Y-TZP samples into rabbit tibiae. However, Y-TZP showed marked phase transformation (approximately 80%) after aging in an autoclave (121 degrees C) for 190 h or in physiological saline at 62 degrees C for 18 months, whereas the new composite remained almost resistant to degradation. According to the results of self-pairing pin-on-disk wear tests using ceramic specimens with or without autoclave aging, the wear factor was almost the same between Ce-TZP/Al(2)O(3) samples with and without aging (6.74 +/- 0.36 x 10(-8) and 6.04 +/- 0.95 x 10(-8) mm(3)/Nm, respectively). In contrast, although non-aged Y-TZP had the lowest wear factor (4.88 +/- 0.51 x 10(-8) mm(3)/Nm) of all specimens tested, aged Y-TZP showed 10-fold greater wear than nonaged Y-TZP. The present study suggests that Ce-TZP/Al(2)O(3) nanocomposite has much greater phase stability than Y-TZP, and that its wear properties are not influenced by aging.

Ce-TZP/Al2O3 nanocomposite as a bearing material in total joint replacement.

The objectives of this study were to investigate the biocompatibility, phase stability, and wear properties of a newly developed Ce-TZP/Al(2)O(3) nanocomposite, as compared to conventional ceramics, and to determine whether the new composite could be used as a bearing material in total joint prostheses. In tests of mechanical properties, this composite showed significantly higher toughness than conventional Y-TZP. For biocompatibility tests, cylindrical specimens of both the Ce-TZP/Al(2)O(3) nanocomposite and monolithic alumina were implanted into the paraspinal muscles of male Wistar rats. The tissue reactions were almost the same, and at 24 weeks after implantation, thin fibrous capsules with almost no inflammation were observed around both of them. There were no significant differences in membrane thickness between the two ceramics. After hydrothermal treatment in 121 degrees C vapor for 18 h, the new composite showed complete resistance to aging degradation, whereas Y-TZP showed a phase transformation of 25.3 vol% (initial 0.4%) to the monoclinic form. According to the results of pin-on-disk tests, the wear rates of Ce-TZP/Al(2)O(3) nanocomposite and alumina were 0.55 +/- 0.04 x 10(-7) and 2.12 +/- 0.37 x 10(-7)mm(3)/Nm, respectively. The results of this study suggest that the Ce-TZP/Al(2)O(3) nanocomposite is a promising alternative ceramic component for total joint replacement.

Apatite-forming ability of a zirconia/alumina nano-composite induced by chemical treatment.

Induction of an apatite-forming ability on a nano-composite of a ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and alumina (Al2O3) polycrystals via chemical treatment with aqueous solutions of H3PO4, H2SO4, HCl, or NaOH has been investigated. The Ce-TZP/Al2O3 composite is attractive as a load-bearing bone substitute because of its mechanical properties. The chemical treatments produced Zr-OH surface functional groups, which are known to be effective for apatite nucleation in a body environment. The composite, after chemical treatment, was shown to form a bonelike apatite layer when immersed in a simulated body fluid containing ion concentrations nearly equal to those in human blood plasma. This implies that it may form apatite in the living body and bond to living bone through the apatite layer. This type of bioactive Ce-TZP/Al2O3 composite is therefore expected to be useful as a bone substitute, even under load-bearing conditions.