As (III) removal using superparamagnetic magnetite nanoparticles synthesized using Ulva prolifera - optimization, isotherm, kinetic and equilibrium studies.

In this study, magnetite nanoparticles (MNPs) were synthesized using the seaweed - Ulva prolifera, an amply found marine source in the Western coastal regions of India. The surface and other properties of MNPs were characterized by many sophisticated methods. Spherical nanoclusters were observed in the FESEM image and iron and oxygen elements were seen in EDS results. XRD peaks were consistent with magnetite standards and MNPs had good crystallinity. FTIR portrayed the specific signals for MNPs and TGA profile ascertained the thermal stability. Magnetic saturation of 41.84 emu/g with negligible hysteresis loop substantiated the superparamagnetism. XPS pointed out the presence of Fe and O with oxidation states specific for MNPs, and the results were consistent with EDS. BET revealed a high specific surface area (144.98 m2/g) of MNPs with mesopores. The synthesized MNPs were used as nanoadsorbent for the removal of As (III) from aqueous solution. The central composite design was used for optimizing As (III) adsorption on MNPs. The optimum conditions were found out as 97.5% at pH: 9, rotation speed: 150 rpm, time: 90 min, and MNPs dosage: 1.15 g/L. The adsorption process fitted in a better way with the Langmuir isotherm and pseudo-second-order model. The highest adsorption capacity was 12.45 mg/g, which is substantially larger than the documenter reports. The spontaneous and endothermic nature of adsorption were ascertained from thermodynamic studies. The results suggested that the synthesized MNPs using the extract of U. prolifera could be alternative nanoadsorbents for eliminating toxic heavy metals from waste streams.

Synthesis of hydroxyapatite nanoparticles using Acacia falcata leaf extract and study of their anti-cancerous activity against cancerous mammalian cell lines.

This study deals with the synthesis of hydroxyapatite nanoparticles (HAPnps) mediated by Acacia falcata leaf extract. Aggregates of needle-shaped crystalline nanostructures were confirmed by FE-SEM and TEM analysis. Well-defined rings in the SAED patterns corroborated the polycrystalline nature of the HAPnps. Individual elements present in the HAPnps were attested by the specific signals for Ca, P, and O in the EDS and XPS analyses. The distinct peaks observed in the XRD spectrum matched well with the HAP hexagonal patterns with a mean crystallite size of 55.04 nm. The FTIR study unveiled the coating of the nanoparticles with the biomolecules from Acacia falcata leaves. The suspension HAPnps exhibited polydispersity (0.446) and remarkable stability (zeta potential: - 31.9 mV) as evident from DLS studies. The pore diameter was 25.7 nm as obtained from BET analysis, suggesting their mesoporous nature. The HAPnps showed the cytotoxic effect on A549 lung and MDA-MB231 breast carcinoma cell lines, with an IC50 value of 55 µg/mL. The distortion of the cell membrane and cell morphology, along with the chromatin condensation and cell necrosis on treatment with HAPnps were detected under fluorescence microscopy post acridine orange/ethidium bromide dye staining. This study reports the anti-cancerous potential of non-drug-loaded plant-mediated HAPnps. Therefore, the HAPnps obtained in this investigation could play a vital role in the biomedical field of cancer therapy.

Adsorptive removal of Acid Blue 113 using hydroxyapatite nanoadsorbents synthesized using Peltophorum pterocarpum pod extract.

The present work reports the study on the green synthesis of hydroxyapatite (HAP) nanoadsorbents using Peltophorum pterocarpum pod extract. HAP nanoadsorbents were characterized by using FESEM, EDS, TEM, XRD, FTIR, XPS, and BET analyses. The results highlighted the high purity, needle-like aggregations, and crystalline nature of the prepared HAP nanoadsorbents. The surface area was determined as 40.04 m2/g possessing mesopores that can be related to the high adsorption efficiency of the HAP for the removal of a toxic dye, - Acid Blue 113 (AB 113) from water. Central Composite Design (CCD) was used for optimizing the adsorption process, which yielded 94.59% removal efficiency at the optimum conditions (dose: 0.5 g/L, AB 113 dye concentration: 25 ppm, agitation speed: 173 rpm, and adsorption time: 120 min). The adsorption kinetics followed the pseudo-second-order model (R2:0.9996) and the equilibrium data fitted well with the Freundlich isotherm (R2:0.9924). The thermodynamic parameters indicated that the adsorption of AB 113 was a spontaneous and exothermic process. The highest adsorption capacity was determined as 153.85 mg/g, which suggested the promising role of green HAP nanoadsorbents in environmental remediation applications.

Synthesis, characterization and photocatalytic dye degradation capability of Calliandra haematocephala-mediated zinc oxide nanoflowers.

An environmentally sound approach towards the green synthesis of zinc oxide nanostructures has been achieved with an aqueous extract of Calliandra haematocephala leaves. The nanoparticles were characterized using various analytical techniques to substantiate the structural details. An absorption band at 358 nm corresponds to the formation of zinc oxide nanoparticles. Scanning electron microscopy revealed the nanoflower morphology of the nanoparticles. Energy dispersive spectral analysis portrayed the strong presence of zinc and oxygen, while X-ray diffraction showed the nanoparticles to conform to hexagonally-formed wurtzite structure. The crystallite size of the nanoflowers was estimated to be 19.45 nm. Vibrational frequencies, typical of zinc­oxygen and other functional groups, were revealed using Fourier transform infrared spectroscopy. BET analysis revealed that the pores were of mesoporous nature with an estimated specific surface area of 9.18 m2/g. The photocatalytic nature of the nanoparticles was established by the degradation of methylene blue (MB) dye, under solar radiation. Up to 88% degradation was achieved in a duration of 270 min. Kinetic data from the studies proved that the reaction was compliant with first-order model, with rate constant as 0.01 min-1. The study illustrated the synthesis of zinc oxide nanoparticles using a novel source, viz., the leaves of C. haematocephala.

Photocatalytic degradation of Rhodamine B by zinc oxide nanoparticles synthesized using the leaf extract of Cyanometra ramiflora.

In the current study, the green synthesis of zinc oxide nanoparticles (ZnONPs) using the leaf extract of Cyanometra ramiflora and zinc acetate precursor is presented. The phyto-components of the extract aided the reduction and the formation of nanoparticles. The purified ZnONPs were characterized by UV-Vis spectroscopy, SEM, EDS, XRD, BET, and FTIR techniques. A sharp absorption maximum at 360 nm in the UV-Vis data affirmed the formation of ZnONPs. SEM image revealed the nanoflower morphology and EDS showed strong signals for zinc and oxygen elements. XRD spectrum confirmed the hexagonal wurtzite crystalline structure of size 13.33 nm. A significant large surface area of 16.27 m2/g with mesopores, was affirmed using BET analysis. FTIR substantiated the existence of the characteristic zinc and oxygen bonding vibrations at 557 cm-1, 511 cm-1 and 433 cm-1. The photocatalytic activity of the ZnONPs was examined using the pollutant dye, Rhodamine B. A remarkable degradation efficiency of 98% within 200 min was achieved under sunlight irradiation and a degradation constant of 0.017 min-1 was obtained. Therefore, ZnONPs synthesized using a cheap and abundant source - the leaf extract of C.ramiflora possibly will play a promising part in the degradation of toxic dyes present in the wastewater.

Production of a Lipopeptide Biosurfactant by a Novel Bacillus sp. and Its Applicability to Enhanced Oil Recovery.

Biosurfactants are surface-active compounds derived from varied microbial sources including bacteria and fungi. They are secreted extracellularly and have a wide range of exciting properties for bioremediation purposes. They also have vast applications in the food and medicine industry. With an objective of isolating microorganisms for enhanced oil recovery (EOR) operations, the study involved screening of organisms from an oil-contaminated site. Morphological, biochemical, and 16S rRNA analysis of the most promising candidate revealed it to be Bacillus siamensis, which has been associated with biosurfactant production, for the first time. Initial fermentation studies using mineral salt medium supplemented with crude oil resulted in a maximum biosurfactant yield of 0.64 g/L and reduction of surface tension to 36.1 mN/m at 96 h. Characterization studies were done using thin layer chromatography and Fourier transform infrared spectroscopy. FTIR spectra indicated the presence of carbonyl groups, alkyl bonds, and C-H and N-H stretching vibrations, typical of peptides. The extracted biosurfactant was stable at extreme temperatures, pH, and salinity. Its applicability to EOR was further verified by conducting sand pack column studies that yielded up to 60% oil recovery.