[Current status, trends, and challenges of continuous manufacturing technology for oral traditional Chinese medicine solid preparations].

In recent years, continuous manufacturing technology has attracted considerable attention in the pharmaceutical industry. This technology is highly sought after for its significant advantages in cost reduction, increased efficiency, and improved productivity, making it a growing trend in the future of the pharmaceutical industry. Compared to traditional batch production methods, continuous manufacturing technology features real-time control and environmentally friendly intelligence, enabling pharmaceutical companies to produce drugs more efficiently. However, the adoption of continuous manufacturing technology has been slow in the field of traditional Chinese medicine(TCM) pharmaceuticals. On the one hand, there is insufficient research on continuous manufacturing equipment and technology that align with the characteristics of TCM preparations. On the other hand, the scarcity of talent with diverse expertise hampers its development. Therefore, in order to promote the modernization and upgrading of the TCM pharmaceutical industry, this article combined the current development status of the TCM industry to outline the development status and regulatory requirements of continuous manufacturing technology. At the same time, it analyzed the problems with existing TCM manufacturing models and explored the prospects and challenges of applying continuous manufacturing technology in the field of TCM pharmaceuticals. The analysis focused on continuous manufacturing control strategies, technical tools, and pharmaceutical equipment, aiming to provide targeted recommendations to drive the development of the TCM pharmaceutical industry.

[Current research status and application prospect of numerical simulation in traditional Chinese medicine drying].

With the rapid development of computer technology, numerical simulation has gradually become an important method to study drying process and improve drying equipment. Using computer to simulate the drying process of traditional Chinese medicine(TCM) is characterized by intuitiveness, scientificity, and low cost, which serves as an auxiliary means for technical innovation in TCM drying. This paper summarizes the theories of different drying methods and the research status of numerical simulation in drying, introduces the modeling methods and software of numerical simulation, and expounds the significance of numerical simulation modeling in shortening the research and development cycle, improving drying equipment, and optimizing drying parameters. However, the current numerical simulation method for drying process has problems, such as low accuracy, lack of quantitative indicators for the control of simulation results on the process, and insufficient in-depth research on the mechanism of drug quality changes. Furthermore, this paper put forward the application prospect of numerical simulation in TCM drying, providing reference for the further study of numerical simulation in this field.

[Modern research progress in external application of traditional Chinese medicine to acupoints].

Traditional Chinese medicine(TCM) has a long history and abundant experience in external therapy, which marks human wisdom. In the early history of human, people found that fumigation, coating, and sticking of some tree branches and herb stems can help alleviate scabies and remove parasites in productive labor, which indicates the emergence of external therapy. Pathogen usually enters the body through the surface, so external therapy can be used to treat the disease. External therapy is among the major characteristic of surgery of TCM. As one of the external therapies in TCM, external application to acupoints smooths the zang-fu organs through meridians and collaterals, thereby harmonizing yin and yang. This therapy emerged in the early society, formed the Spring and Autumn Period and the Warring States Period, improved in the Song and Ming dynasties, and matured in the Qing dynasty. With the efforts of experts in history, it has had a mature theory. According to modern research, it can avoid the first-pass effect of liver and the gastrointestinal irritation and improve the bioavailability of Chinese medicine. Based on the effect of Chinese medicine and the theory of meridian and collateral, it can stimulate the acupoints, exert regulatory effect on acupoints, and give full play to the efficacy of TCM and the interaction of the two. Thereby, it can regulate qi and blood and balance yin and yang, thus being widely used in the treatment of diseases. In this paper, the use of external application to acupoints, the effect on skin immunity, the regulation of neuro-inflammatory mechanism, the relationship between acupoint application and human circulation network, and the development of its dosage form were summarized through literature review. On this basis, this study is expected to lay a foundation for further research.

[Quality control mode based on engineering quality view of Chinese medicine pharmacy].

Due to the characteristics of confusing varieties of Chinese medicinal materials, different sources, complex chemical composition, non-standard preparation process, and non-standard pharmaceutical equipment, the quality of Chinese medicinal preparations is difficult to be controlled and evaluated effectively under the current quality control mode and method of Chinese medicinal preparation. The present study proposed an engineering quality view of Chinese medicine pharmacy and a strategy to control the quality of Chinese medicinal preparations based on the current situation. The "overall, dialectical, and dynamic" multi-factor engineering quality view, covering original medicinal materials, preparation technologies, pharmaceutical equipment, and Chinese medicinal preparations, ensures the traceable process, measurable procedures, and feedback quality. The quality control mode of Chinese medicinal preparation with controllable sources, standardized preparation technologies, green pharmaceutical equipment, and intelligent manufacturing is built up.

New enantiomeric lignans and new meroterpenoids with nitric oxide release inhibitory activity from Piper puberulum.

Six new lignans with various type of linkage between two C6-C3 fragments (1a, 1b, 2a, 2b, 3, 4), two new meroterpenoids (5, 6) and 24 known compounds (7-30) were isolated from an EtOH extract of the stems and leaves of Piper puberulum. The absolute configurations of enantiomers 1a and 1b were determined by single-crystal X-ray diffraction analysis, 2a and 2b were determined by comparing their calculated and experimental ECD spectra. Biogenetically, all the new lignans may come from the polymerization of two molecules of hydroxychavicol (30). In the anti-neuroinflammation activity assay, the IC50 values of fifteen compounds were lower than those of the positive control minocycline, and compound 1a showed good activity, but its enantiomer 1b showed no activity. Compound 1a have notable anti-neuroinflammatory activity, and can significantly decrease mRNA levels of proinflammatory cytokines (IL-1ß, IL-6, TNF-α) in a dose-dependent manner.

[Online moisture detection technology and its application prospect in drying of traditional Chinese medicine].

Drying is one of the most common unit operations in the production of traditional Chinese medicine. The drying process of traditional Chinese medicine materials is accompanied by the dynamic reduction of water content. As a key index to determine the end of the drying process, the moisture content of materials plays an important role in improving drying efficiency and saving energy. Recently, the drying process of traditional Chinese medicine is mostly monitored by offline detection, and there are few reports of online moisture detection applications. In this paper, the principle and current application of online inspection technology for the material drying process in different fields were introduced. The significance of online detection technology in drying of traditional Chinese medicine was also analyzed. Meanwhile, the application prospect of online detection technology in the field of drying of traditional Chinese medicine was predicted. In response to urgent transformation and upgrading of the traditional Chinese medicine manufacturing industry, the application of online moisture detection technology is expected to be a key breakthrough in the intelligent upgrading of traditional Chinese medicine drying technology and equipment.

Flavonol glycosides and phenylpropanoid glycosides with inhibitory effects on microglial nitric oxide production from Neoshirakia japonica.

Five new flavonol glycosides (1-5), one new phenylpropanoid glycoside (6), and nine known glycosides (7-15) were isolated from the stems and leaves of Neoshirakia japonica. The structures of the new compounds were determined by detailed analysis of spectroscopic data (HRESIMS, 1D and 2D NMR) and acid hydrolysis experiment. The antineuroinflammatory effects of all the isolates were evaluated by inhibiting NO production against LPS-induced BV-2 microglial cells. Compounds 1, 8, and 9 showed more potent inhibitory activities with IC50 values of 2.7, 5.5, and 4.1 µM, respectively, than that of the positive control minocycline (IC50 = 15.6 µM), while compounds 7 (IC50 = 17.0 µM) and 10 (IC50 = 24.3 µM) also displayed inhibitory activities to a certain degree.

Diterpenoids and triterpenoids from Triadica rotundifolia and their effects on microglial nitric oxide production.

Four new diterpenoids (1-4), three new triterpenoids (12-14), and seven known diterpenoids (5-11) were obtained from an aqueous EtOH extract of the aerial parts of Triadica rotundifolia. The structures of new compounds were determined by spectroscopic techniques. Their absolute configurations were verified via single-crystal X-ray diffraction data, Mo2(OAc)4 induced electronic circular dichroism (ECD), and ECD calculations. The antineuroinflammatory effects of the isolates were assessed by inhibiting NO production in LPS-induced BV-2 microglial cells. Compared with the positive control minocycline (IC50 = 16.1 µM), compounds 3, 8, 11 showed moderate inhibitory activities with IC50 values of 35.9, 17.0, 31.5 µM, respectively.

Isolation, Absolute Configuration, and Biological Activities of Chebulic Acid and Brevifolincarboxylic Acid Derivatives from Euphorbia hirta.

Twenty new chebulic acid and brevifolincarboxylic acid derivatives, including eight optically pure or achiral compounds (1-7 and 14) and six pairs of enantiomers (8a/8b-13a/13b), along with nine known analogues (15-23), were isolated from an EtOH extract of the aerial parts of Euphorbia hirta. The absolute configurations of the new compounds were assigned based on single-crystal X-ray diffraction analysis and comparison of the experimental and calculated ECD data. Racemic or scalemic mixtures of 8-13 were isolated, and their enantiomers were analyzed by chiral-phase HPLC-ECD measurements. Compound 12 possesses an unprecedented 2H-cyclopenta[de]chromene-2,5(4H)-dione scaffold. Compounds 12, 20, and 23 displayed moderate inhibitory effects against lipopolysaccharide-induced nitric oxide production in BV-2 microglial cells, while all the isolates exhibited significant DPPH radical scavenging activities with EC50 values of 2.2-15.8 µM.

[Absorption and Transportation of Selenium Nanoparticles in Wheat and Rice].

Hydroponics experiments were carried out to study the effects of different sizes of selenium nanoparticles (SeNPs) and different pH on the absorption and transportation of Se by wheat (Triticum aestivum L.) and rice (Oryza sativa L.). The results showed that SeNPs with different sizes (50, 100, and 150 nm) had various characteristics with respect to absorption and translocation in wheat and rice. There was no significant difference in the uptake of SeNPs with different sizes by wheat roots after 24 h and 72 h; however, the highest Se content in wheat shoots was (1.89±0.47) µg·g-1 dry weight (DW) and (5.18±1.51) µg·g-1 DW under the 50 nm SeNPs treatment after 24 h and 72 h, respectively. Moreover, the transfer factor for Se in wheat under the 50 nm SeNPs treatment was 2.38 times higher than that of the 100 nm and 150 nm treatments. The Se content of rice roots treated for 24 h with the 50 nm SeNPs increased by 11.18% and 41.81% compared to those treated with the 100 nm and 150 nm SeNPs, respectively. There were, however, no significant differences in Se content between all of the SeNPs treatments after 72 h. The Se content of rice shoots and the Se transfer factor both reached the maximum when 50 nm SeNPs were applied. In addition, Se absorption by plants was also affected by pH. Specifically, the amount of Se absorbed by wheat roots treated with SeNPs was the greatest at a pH of 6 after 24 h, which was 89.47% higher than wheat treated with selenite. Furthermore, the highest Se transfer factor occurred at a pH of 4 in wheat. The uptake of SeNPs in rice was markedly lower than that of selenite at low pH values (pH=3.5 and 5.5) and SeNPs was more readily transported at a pH of 3.5. These results demonstrate that SeNPs could be taken up by wheat and rice and that it could be transferred more easily as small particle size (50 nm) than the larger ones (100 nm and 150 nm) at low pH values (pH 3.5).

[Preliminary study on standardization of production and processing of Scutellaria baicalensis pieces].

Decoction pieces are important raw materials in the production of traditional Chinese medicine( TCM),and their quality could directly affect the clinical efficacy and medication safety. Research on the production and processing technology of TCM is the basis for the normalization and standardization of Chinese medicine decoction pieces. At present,the production and processing standards for Scutellaria baicalensis pieces are non-regulated,lacking data foundation. In this study,with baicalin,baicalein,wogonoside and wogonin contents as evaluation indicators,single factor experiment was designed to optimize the softening,drying and cutting processes of S. baicalensis,providing a basis for the standardization of their production and processing. The effects of different softening,drying and cutting processes on the contents of the main components in S. baicalensis were comprehensively analyzed by the summation of relative differences. RESULTS:: showed that the contents of the four components and comprehensive indexes were affected by different softening methods and drying temperatures. The content of wogonin in boiling method was higher than that in boiling with cold water,and the content of glycosides in 70 ℃ drying condition was higher than that in other groups. The content of baicalin was significantly affected by different cutting thicknesses,but not by comprehensive index. Eventually,the optimal preparation process for S. baicalensis was determined as follows: boiled in boiling water for 20 min,cut into thin slices( 1-2 mm),and then dried at 70 ℃ in blast drier. This process was close to the actual production,practical and feasible and meanwhile,it was of great significance to improve the quality of S. baicalensis pieces.

Difference between selenite and selenate in selenium transformation and the regulation of cadmium accumulation in Brassica chinensis.

Se can regulate Cd accumulation and translocation in plants; however, such effects can be controversial because of the differences in plant species and Se species. In this study, pak choi was cultured under hydroponic conditions, and the effects of selenite and selenate on Cd accumulation were investigated in the edible parts of this vegetable. The results showed gradual improvements in the effects of the two Se species on the Cd content in pak choi shoots at the four assessed growing stages. Selenite did not lead to significant changes in Cd accumulation in the shoots until day 40, when it significantly reduced the accumulation by 34%. Selenate was always found to increase the Cd content in the shoots, and the differences on days 19 and 40 were 16% and 45%, respectively, compared with those of the Cd (only) treatment. Accordingly, selenate invariably enhanced Cd translocation from the roots to the shoots, whereas selenite insignificantly reduced the translocation only on day 40. Generally, selenomethionine (SeMet) accounted for much larger proportions in selenite-treated plants, while SeO42- was the dominant Se species in selenate-treated plants. However, under both Se treatments, the SeMet proportion increased substantially from day 19 to day 40 when that of SeO42- exhibited a drastic decrease; therefore, the relative proportion of seleno-amino acids to SeO42- may be the key factor for the regulation of Cd accumulation in pak choi via treatment with selenite and selenate at the different growing stages.

Transcriptomic identification of salt-related genes and de novo assembly in common buckwheat (F. esculentum).

Common buckwheat (F. esculentum), annually herbaceous crop, is prevalent in people's daily life with the increasing development of economics. Compared with wheat, it is highly praised with high content of rutin and flavonoid. Common buckwheat is recognized as healthy food with good taste, and the product price of which such as noodles, flour, bread and so on are higher than wheat, and the seeds of which are bigger than that of tartary buckwheat, so if common buckwheat are planted more widely, people will spend less money on this healthy and delicious food. However, soil salinity has been a giant problem for agriculture production. The cultivation of salt tolerant crop varieties is an effective way to make full use of saline alkali land, and the highest salinity that the common buckwheat can sow is at 6.0%, so we chose 100 mM as the concentration of NaCl for treatment. Then we conducted transcriptome comparison between control and treatment groups. Potential regulatory genes related salt stress in common buckwheat were identified. A total of 29.36 million clean reads were produced via an illumina sequencing approach. We de novo assembled these reads into a transcriptome dataset containing 43,772 unigenes with N50 length of 1778 bp. A total of 26,672 unigenes could be found matches in public databases. GO, KEGG and Swiss-Prot classification suggested the enrichment of these unigenes in 47 sub-categories, 25 KOG and 129 pathways, respectively. We got 385 differentially expressed genes (DEGs) after comparing the transcriptome data between salt treatment and control groups. There are some genes encoded for responsing to stimulus, cell killing, metabolic process, signaling, multi-organism process, growth and cellular process might be relevant to salt stress in common buckwheat, which will provide a valuable references for the study on mechanism of salt tolerance and will be used as a genetic information for cultivating strong salt tolerant common buckwheat varieties in the future.

[Quality process control system of Chinese medicine preparation based on "holistic view"].

"High quality, safety and effectiveness" are the primary principles for the pharmaceutical research and development process in China. The quality of products relies not only on the inspection method, but also on the design and development, process control and standardized management. The quality depends on the process control level. In this paper, the history and current development of quality control of traditional Chinese medicine (TCM) preparations are reviewed systematically. Based on the development model of international drug quality control and the misunderstanding of quality control of TCM preparations, the reasons for impacting the homogeneity of TCM preparations are analyzed and summarized. According to TCM characteristics, efforts were made to control the diversity of TCM, make "unstable" TCM into "stable" Chinese patent medicines, put forward the concepts of "holistic view" and "QbD (quality by design)", so as to create the "holistic, modular, data, standardized" model as the core of TCM preparation quality process control model. Scientific studies shall conform to the actual production of TCM preparations, and be conducive to supporting advanced equipment and technology upgrade, thoroughly applying the scientific research achievements in Chinese patent medicines, and promoting the cluster application and transformation application of TCM pharmaceutical technology, so as to improve the quality and effectiveness of the TCM industry and realize the green development.

[Bile-resistant Gram-negative bacteria effect of different kinds of root decoction pieces].

To investigate the microbial contamination in Chinese herbal decoction pieces with different functional types by studying the total aerobic microbial count (TAMC), and total yeast and mould count (TYMC) in 40 samples of 8 types of root decoction pieces; further evaluate the contamination load of bile-resistant Gram-negative bacteria, and identify the Gram-negative bacteria by using biochemical identification system for Gram-negative bacteria. Our results showed that the TAMC value was more than 1 000 CFU•g⁻¹ in 85% (34/40) samples, and was more than 100 CFU•g⁻¹ in 30% (12/40) samples; the contamination of bile-resistant Gram-negative bacteria was detected in 45% (18/40) of the samples. The bile-resistant Gram-negative bacteria load of seven batches of samples was N>1 000 MPN•g⁻¹. Sixteen bacterium strains including Serratia plymouthensis, Cedecea neteri, Escherichia vulneris, Klebsiella oxytoca, Enterobacter amnigenus, E. cloacae, E. sakazakii, Proteus penneri and E. gergoviae were obtained and identified. E. cloacae was the predominant bacterium that was isolated from Salviae Miltiorrhizae Radix et Rhizoma, while E. amnigenus, Yersinia pseudotuberculosis was the typical bacterium of Ophiopogonis Radix and Codonopsis Radix, respectively. All these suggested that the contamination of bile-resistant Gram-negative bacteria was severe for the root decoction pieces in Wuhan city. Microbial species have certain selection specificity for medicinal ingredients, so the type and limit of control bacteria for detection should be formulated according to the pollution type and quantity of bile-resistant Gram-negative bacteria.

[Status, problems and warranty strategy of quality uniformity for traditional Chinese medicine preparations].

The quality uniformity of traditional Chinese medicine (TCM) preparation is the base for guaranteeing the safety and effectiveness of clinical medication. At present, the quality of TCM preparation is uneven. At present, the same TCM preparation in different manufacturers, TCM preparations in the same manufacturer, and even different batches of a same TCM preparation in the same manufacturer have great differences in quality, which can not reach stability and uniformity. This paper would discuss the possible factors that influence the uniformity of quality in the whole process of pharmacy by means of consulting relevant literature on quality control of Chinese herbal preparations and analyzing the present situation and problems of the quality of TCM preparation. In addition, some strategies such as standardization of cultivation of TCM, processing standardization, standardization of pharmaceutical equipment, mixed batch feeding, and Quality by Design would be also put forward to provide references for the quality uniformity of TCM preparation.

[Analysis and countermeasure for quality risk in process of traditional Chinese medicine preparations].

Product quality relies on not only testing methods,but also the design and development, production control and product manufacturing all aspects of logistics management. Quality comes from the process control level.Therefore, it is very important to accurately identify the factors that may induce quality risk in the production process and quality control measures correspondingly.This article systematically analyzes the source of the quality risk of all aspects of the production process in traditional Chinese medicine preparation. Discussing ways and methods of quality risk identification of traditional Chinese medicine preparation and providing references for perfecting the whole process quality management of traditional Chinese medicine preparation.

Vitamin D Supplementation Prevents Placental Ischemia Induced Endothelial Dysfunction by Downregulating Placental Soluble FMS-Like Tyrosine Kinase-1.

Maternal vitamin D deficiency in pregnancy has been associated with an increased risk of preeclampsia. Vascular endothelial dysfunction is a major phenotype of pregnancies with preeclampsia, contributing to increased maternal hypertension and proteinuria. We sought to determine whether vitamin D supplementation would alleviate preeclampsia associated endothelial dysfunction and explore the underlying mechanism using the reduced uterine perfusion pressure (RUPP) rat model. RUPP operated rats were supplemented with 1,25(OH)2D (RUPP+VD) on day 1, 7, and 14 of pregnancy by subcutaneous injection. On day 19 of pregnancy, after the measurement of blood pressure and urine collection, maternal blood serum and placenta samples were collected. 1,25(OH)2D treatment significantly improved endothelial dysfunction by reducing apoptosis and increasing nitric oxide (NO) production in blood vessels of RUPP operated rats compared to untreated RUPP rats. 1,25(OH)2D significantly down-regulated the expression of placental soluble FMS-like tyrosine kinase-1 (sFlt-1) in RUPP rats. Furthermore, the circulating sFlt-1 levels in maternal serum were positively correlated with the expression of placental sFlt-1 and were restored to a normal pregnant level by 1,25(OH)2D treatment in RUPP rats. Incubation of endothelial cell line with rat serum from RUPP+VD group significantly increased NO production and decreased caspase-3 activity compared with serum from untreated RUPP rats. Moreover, neutralization of sFlt-1 using the specific antibody mimicked the effect of 1,25(OH)2D, which abolished the deleterious effect of RUPP rat's serum on NO production and apoptosis. These results suggest that vitamin D supplementation is protective against RUPP induced endothelial dysfunction by downregulating placental sFlt-1, which can possibly alleviate preeclampsia associated symptoms.

[Correlation between Andrographis Herba preparation's fingerprint, pharmacological activity and preparation process].

Process design grants the quality connotation to products. This paper was to investigate the correlation between changes of chemical fingerprints of Andrographis Herba preparation and its pharmacological activity, and set up the bridge between key process and quality attributes. By referring to the preparation process of Andrographis Herba. preparation (extracting-concentrating-drying-granulation), HPLC fingerprints were employed to determine the difference of the effective materials of the intermediate micro components. Cluster analysis results indicated that the extraction link had great influence on quality connotation variation of Andrographis Herba preparation. The pharmacological activity of various intermediates was continuously decreased in the models of DPPH antioxidant activity and LPS-induced anti-inflammatory activity in mice peritoneal macrophages. Traditional high temperature treatment process was detrimental to its clinical effect from the curve equation between the key process parameters and pharmacodynamic activity. Partial least square (PLS) was used to construct spectrum-efficiency model equation, and it was verified that this equation could accurately predict the relationship between fingerprints and pharmacological activity, which would facilitate the subsequent evaluation of quality attributes and provide scientific basis for further quality control of the whole process.

[Allelopathic effects of extracts from tuberous roots of Aconitum carmichaeli on three pasture grasses].

The tuberous roots of Aconitum carmichaeli are largely used in traditional Chinese medicine and widely grown in Jiangyou, Sichuan, China. During the growth process, this medicinal plant releases a large amount of allelochemicals into soil, which retard the growth and development of near and late crops. Therefore, a pure culture experiment was thus carried out by seed soaking to study the allelopathic effects of extracts from tuberous roots of A. carmichaeli (ETR) on the seed germination and young seedling growth of Lolium perenne, Trifolium repens, and Medicago sativa, the late pasture grasses after cultivation of A. carmichaeli. The results showed that three pasture grasses varied significantly in seed germination and young seedling growth in response to ETR concentrations. Seed germination of M. sativa was stimulated by low ERT concentration (0.01 x g(-1)), while all of pasture grass seeds germinated poorly in solution with 1.00 g x L(-1). Seed soaking with 1.00 g x L(-1) also inhibited significantly the growth of pasture young seedlings, with M. sativa showing the highest seedling height reduction of 42.05% in seeding height, followed by T. repens (40.21%) and L. perenne with about 11%. Cultivation of L. perenne could thus be beneficial to increase whole land productivity in A. carmichaeli-pasture grass cropping systems. In addition, hydrolysis of protein, starch, and inositol phosphates was blocked and free amino acids, soluble sugars and phosphorus were decreased in seeds by seed soaking with ETR, which could be one of the reason for the inhibition of seed germination. There was a significant reduction in root vigor, nitrate reductase, and chlorophyll after the seed treatment with ETR, indicating the suppression of nutrient uptake, nitrate assimilation, and photosynthesis by allelopathic chemicals in ETR, which could lead to the slow growth rate of pasture grass seedlings.