Evaluation of five filter media in column experiment on the removal of selected organic micropollutants and phosphorus from household wastewater.

A bench-scale column experiment was performed to study the removal of 31 selected organic micropollutants (MPs) and phosphorus by lignite, xyloid lignite (Xylit), granular activated carbon (GAC), Polonite® and sand over a period of 12 weeks. In total 29 out of the 31 MPs showed removal efficiency >90% by GAC with an average removal of 97 ±â€¯6%. Xylit and lignite were less efficient with an average removal of 80 ±â€¯28% and 68 ±â€¯29%, respectively. The removal efficiency was found to be impacted by the characterization of the sorbents and physicochemical properties of the compounds, as well as the interaction between the sorbents and compounds. For instance, Xylit and lignite performed well for relatively hydrophobic (log octanol/water partition coefficient (Kow) ≥3) MPs, while the removal efficiency of moderately hydrophilic, highly hydrophilic and negatively charged MPs were lower. The organic sorbents were found to have more functional groups at their surfaces, which might explain the higher adsorption of MPs to these sorbents. The removal of several MPs improved after four weeks in sand, Xylit, GAC and lignite which may be related to increased biological activity and biofilm development. GAC and sand had limited ability to remove phosphorus (12 ±â€¯27% and 14 ±â€¯2%, respectively), while the calcium-silicate material Polonite® precipitated phosphorus efficiently and increased the total phosphorus removal from 12% to 96% after the GAC filter.

Screening and prioritization of micropollutants in wastewaters from on-site sewage treatment facilities.

A comprehensive screening of micropollutants was performed in wastewaters from on-site sewage treatment facilities (OSSFs) and urban wastewater treatment plants (WWTPs) in Sweden. A suspect screening approach, using high resolution mass spectrometry, was developed and used in combination with target analysis. With this strategy, a total number of 79 micropollutants were successfully identified, which belong to the groups of per- and polyfluoroalkyl substances (PFASs), pesticides, phosphorus-containing flame retardants (PFRs) and pharmaceuticals and personal care products (PPCPs). Results from this screening indicate that concentrations of micropollutants are similar in influents and effluents of OSSFs and WWTPs, respectively. Removal efficiencies of micropollutants were assessed in the OSSFs and compared with those observed in WWTPs. In general, removal of PFASs and PFRs was higher in package treatment OSSFs, which are based on biological treatments, while removal of PPCPs was more efficient in soil bed OSSFs. A novel comprehensive prioritization strategy was then developed to identify OSSF specific chemicals of environmental relevance. The strategy was based on the compound concentrations in the wastewater, removal efficiency, frequency of detection in OSSFs and on in silico based data for toxicity, persistency and bioaccumulation potential.

Performance of the CalTOX fate and exposure model in a case study for a dioxin-contaminated site.

Soil with high levels of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) is found at contaminated sites all over the world. Transfer of PCDD/Fs from contaminated soil to the food chain could lead to elevated human exposure. As a complement to available monitoring data, multimedia fate and exposure modeling can be applied to support risk assessment of sites with PCDD/F contaminated soil. In this study, we evaluated the performance of the CalTOX fate and exposure model for 2,3,7,8-substituted PCDD/Fs against measured concentrations in air, soil, grass, carrots, potatoes, milk, meat, and eggs from a contaminated site in northern Sweden. The calculated total toxic equivalent (TEQ) concentrations agree with measurements within a factor of 10 for all exposure media but one. Results for individual congeners demonstrated that the model did not always perform well at describing key processes that mobilize PCDD/Fs out of soils, such as transfer into root crops and ingestion of soil by chickens. Uncertainty in only a small subset of input parameters affects the model output. Improved information and models describing transfer of soil particles onto leafy vegetation by rain splash and biotransfer factors for PCDD/Fs to milk, meat, and eggs are particular research needs to reduce uncertainties in model-based assessments.

A retrospective study of chiropractic treatment of 276 danish infants with infantile colic.

OBJECTIVES: The aim of this study was to investigate if the outcome of excessively crying infants treated with chiropractic manipulation (1) was associated with age and/or (2), at least partially, can be explained by age according to the natural decline in crying. METHODS: This was a retrospective evaluation of clinical records of 749 infants from a private Danish chiropractic practice. All of the infants were healthy, thriving infants born to term within the age of 0 to 3 months who fulfilled the diagnostic criteria for excessively crying infants (infantile colic), whose parents sought chiropractic treatment. The infants were treated using chiropractic management as decided by the treating doctor of chiropractic, and changes in crying based upon the parents' report were noted as improved, uncertain, or nonrecovered. Age predictor groups were cross-tabulated against the outcome variables, and difference between classification groups was tested with χ(2) tables and confidence intervals. RESULTS: Slightly older age was found to be linked to excessively crying infants who experienced clinical improvement. However, no apparent link between the clinical effect of chiropractic treatment and a natural decline in crying was found for this group of infants. CONCLUSION: The findings of this study do not support the assumption that effect of chiropractic treatment of infantile colic is a reflection of the normal cessation of this disorder.

Selective pressurized liquid extraction of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls from food and feed samples.

Selective pressurized liquid extraction (PLE) of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) from various food and feed samples was performed with a selective PLE method previously developed for bulk PCBs. The method utilizes sulfuric acid impregnated silica inside the extraction cell to oxidize coextracted fat. Extractions were performed at 100 degrees C with n-heptane for 5 min in two cycles. Data obtained by selective PLE combined with gas chromatography/high-resolution mass spectrometry (GC-HRMS) were compared to concentrations derived from reference laboratories applying conventional sample preparation and GC-HRMS. Experiments performed on spiked vegetable oil, naturally contaminated crude fish oil and oil containing compound feed samples showed good results for these relatively simple matrices. The accuracy was generally +/-20% as compared to spiked levels or to values obtained by the reference laboratories. The precision, measured as the relative standard deviation (RSD) for 2,3,7,8-tetrachlorodibenzo-p-dioxin toxic equivalency values (TEQs), was below 10% in all cases. The method was also tested on naturally contaminated herring tissue, chicken tissue, pork tissue and sepiolitic clay, which all caused some trouble. It was observed that sufficient amounts of sodium sulfate should be used for dehydration of tissue samples and additionally, the cells should not be packed too dense in order to avoid suppressed extraction efficiency. Once this was attended to, satisfactory data could be obtained, except for sepiolithic clay. This study demonstrates that selective PLE can be applied with success to a number of food and feed matrices in analysis of PCDD/Fs and dl-PCBs. Since the fat removal step is on-line, the selective PLE method will reduce time and solvent consumption for sample preparation as compared to traditional clean-up.