Rapid determination of carbamate pesticides in food using dual counter-current chromatography directly interfaced with mass spectrometry.

Dual counter-current chromatography (dual CCC)-tandem mass spectrometry (MS/MS) was successfully performed with a newly designed spiral column for dual CCC. The small column capacity required for directly coupling with electrospray MS/MS was accomplished by forming a rectangular spiral groove on a plastic disk and sealing it with a PTFE sheet. This novel dual CCC-MS/MS technique was successfully applied for the rapid determination of methomyl, fenobucarb and carbaryl pesticides in food. A two-phase solvent system of n-hexane-acetonitrile-0.1% formic acid (45:45:10) was suitable for both good dual CCC separation and sufficient ionization of pesticides. Recoveries of these three pesticides from mandarin orange and spinach samples fortified at 0.05 mg/kg were in the range of 93-107% with relative standard deviations of 2.4-3.8%.

Application of dual counter-current chromatography for rapid sample preparation of N-methylcarbamate pesticides in vegetable oil and citrus fruit.

Dual counter-current chromatography (dual CCC) has been successfully applied to rapid sample preparation for the simultaneous determination of residual carbaryl, fenobucarb and methomyl in vegetable oil and citrus fruit. The citrus fruit samples were extracted with n-hexane solution containing stable isotopically labeled internal standards (methomyl-d3, fenobucarb-d3 and carbaryl-d9), and applied to dual CCC using a two-phase solvent system of n-hexane-acetonitrile to purify the carbamate pesticides from aliphatic sample matrix. The coiled column was rotated at 420 rpm, the lower mobile phase was introduced through the head toward the tail, and the upper mobile phase in the opposite direction. Due to the high partition efficiency of dual CCC, the lower phase fraction collected from 2 to 5 min after injection could be subjected to flow-injection tandem mass spectrometry directly after concentration. Repetitive sample injection can be performed at high reproducibility without a risk of contamination from the compounds retained in the column.