Ultrasensitive 3D Stacked Silicon Nanosheet Field-Effect Transistor Biosensor with Overcoming Debye Shielding Effect for Detection of DNA.

Silicon nanowire field effect (SiNW-FET) biosensors have been successfully used in the detection of nucleic acids, proteins and other molecules owing to their advantages of ultra-high sensitivity, high specificity, and label-free and immediate response. However, the presence of the Debye shielding effect in semiconductor devices severely reduces their detection sensitivity. In this paper, a three-dimensional stacked silicon nanosheet FET (3D-SiNS-FET) biosensor was studied for the high-sensitivity detection of nucleic acids. Based on the mainstream Gate-All-Around (GAA) fenestration process, a three-dimensional stacked structure with an 8 nm cavity spacing was designed and prepared, allowing modification of probe molecules within the stacked cavities. Furthermore, the advantage of the three-dimensional space can realize the upper and lower complementary detection, which can overcome the Debye shielding effect and realize high-sensitivity Point of Care Testing (POCT) at high ionic strength. The experimental results show that the minimum detection limit for 12-base DNA (4 nM) at 1 × PBS is less than 10 zM, and at a high concentration of 1 µM DNA, the sensitivity of the 3D-SiNS-FET is approximately 10 times higher than that of the planar devices. This indicates that our device provides distinct advantages for detection, showing promise for future biosensor applications in clinical settings.

A Polarization-Switching, Charge-Trapping, Modulated Arithmetic Logic Unit for In-Memory Computing Based on Ferroelectric Fin Field-Effect Transistors.

Nonvolatile logic devices are crucial for the development of logic-in-memory (LiM) technology to build the next-generation non-von Neumann computing architecture. Ferroelectric field-effect transistors (Fe FET) are one of the most promising candidates for LiMs because of high compatibility with mainstream silicon-based complementary metal-oxide semiconductor processes, nonvolatile memory, and low power consumption. However, because of the unipolar characteristics of a Fe FET, a nonlinear XOR or XNOR logic gate function is difficult to realize with a single device. In addition, because single Fe polarization switch modulation is available in the devices, a reconfigurable logic gate usually needs multiple devices to construct and realize fewer logic functions. Here, we introduced polarization-switching (PS) and charge-trapping (CT) effects in a single Fe FET and fabricated a multi-field-effect transistor with bipolar-like characteristics based on advanced 10 nm node fin field-effect transistors (PS-CT FinFET) with 9 nm thick Hf0.5Zr0.5O2 films. The special hybrid effects of charge-trapping and polarization-switching enabled eight Boolean logic functions with a single PS-CT FinFET and 16 Boolean logic functions with two complementary PS-CT FinFETs were obtained with three operations. Furthermore, reconfigurable full 1 bit adder and subtractor functions were demonstrated by connecting only two n-type and two p-type PS-CT FinFET devices, indicating that the technology was promising for LiM applications.

Nanometer-scale oxide thin film transistor with potential for high-density image sensor applications.

The integration of electronically active oxide components onto silicon circuits represents an innovative approach to improving the functionality of novel devices. Like most semiconductor devices, complementary-metal-oxide-semiconductor image sensors (CISs) have physical limitations when progressively scaled down to extremely small dimensions. In this paper, we propose a novel hybrid CIS architecture that is based on the combination of nanometer-scale amorphous In-Ga-Zn-O (a-IGZO) thin-film transistors (TFTs) and a conventional Si photo diode (PD). With this approach, we aim to overcome the loss of quantum efficiency and image quality due to the continuous miniaturization of PDs. Specifically, the a-IGZO TFT with 180 nm gate length is probed to exhibit remarkable performance including low 1/f noise and high output gain, despite fabrication temperatures as low as 200 °C. In particular, excellent device performance is achieved using a double-layer gate dielectric (Al2O3/SiO2) combined with a trapezoidal active region formed by a tailored etching process. A self-aligned top gate structure is adopted to ensure low parasitic capacitance. Lastly, three-dimensional (3D) process simulation tools are employed to optimize the four-pixel CIS structure. The results demonstrate how our stacked hybrid device could be the starting point for new device strategies in image sensor architectures. Furthermore, we expect the proposed approach to be applicable to a wide range of micro- and nanoelectronic devices and systems.